Search NASA⌕ Search

NASA NTRS · 20230006744

Nonlinear Acoustic Propagation in Low-Density Media

Abstract

Nonlinear acoustic propagation in the atmosphere is usually modeled using an augmented Burgers equation accounting for atmospheric absorption and weak nonlinearity. However, the weak-nonlinearity assumption may not apply to acoustic signals propagating from the lower atmosphere that are subsequently refracted downward from the upper atmosphere (e.g., stratosphere and thermosphere) due to the decreasing air density with increasing altitude [Lonzaga, et al., Geophysical Journal International, 200(3), pp.1347-1361]. Consequently, this paper discusses the effects of a strong nonlinearity that lead to an amplitude-dependent increase in signal propagation speed. This propagation speed is obtained using a perturbation expansion where the leading-order term is simply the small-amplitude sound speed while the first-order term is the existing expression that gives rise to waveform steepening and stretching. Furthermore, the second-order term is proportional to the spectral density of the acoustic signal and is inversely proportional to the local density of the medium. Consequently, for an impulsive signal such as a sonic boom or an infrasound, the second-order effect causes a dispersion of the signal similar to the observed dispersion of acoustic signals from supersonic Concorde as well as from large explosions. This paper also discusses the extension of these results in general low-density propagation media.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Joel B. Lonzaga. Nonlinear Acoustic Propagation in Low-Density Media. https://ntrs.nasa.gov/citations/20230006744

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Multiple Scattering Theory for Modeling Sonic Booms in Atmospheric Turbulence

Sonic booms are often modeled using Burgers equations accounting for dominant propagation effects. Scattering effects of turbulence, however, have not been incorporated into such equations, although these effects are ubiquitous in measured sonic booms. This paper formulates the mean scattering effects, including backscattering, using multiple scattering theory and ensemble averaging. It obtains an acousto-turbulence interaction energy representing the interaction of an acoustic wave field with a turbulence field. The interaction energy gives rise to a scattering wavenumber, a complex-valued correction to the free-space wavenumber. The scattering wavenumber leads to a dispersion and attenuation of the mean waveform due to backscattering, and can be obtained from a derived exact solution. An existing Burgers equation is extended to include the scattering effects of turbulence as an additional linear term. Numerical simulations of an N-wave and a low boom show that the mean scattering effects lead to shock thickening in the mean waveforms as well as reduce the peak amplitudes and total energy contents. The energy reduction is less severe in the low boom than in the N-wave and is dependent on the variance, correlation length, and thickness of the turbulence field.

sonic booms↗

A Study of Reflected Sonic Booms Using Airborne Measurements

In support of ongoing efforts to bring commercial supersonic flight to the public, the Sonic Booms in Atmospheric Turbulence (SonicBAT) flight test conducted at NASA Armstrong Flight Research Center. During this test, airborne sonic boom measurements were made using an instrumented TG-14 motor glider, called the Airborne Acoustic Measurement Platform (AAMP).During the flight program, the AAMP was consistently able to measure the sonic boom wave that was reflected off of the ground, in addition to the incident wave, resulting in the creation of a completely unique data set of airborne sonic boom reflection measurements.

sonic booms↗