TriFrame Mount Structural Performance - Period A

Colby, Jonathan; Corren, Dean; Adonizio, Mary Ann; Paradis, Leighton

doi:10.15473/1832142

Home/Archive/DOE OSTI

DOE OSTI · 1832142

TriFrame Mount Structural Performance - Period A

Colby, Jonathan·Corren, Dean·Adonizio, Mary Ann·Paradis, Leighton

View original source ↗Read source document ↗Export metadata ↓

Abstract

Long-Term TriFrame Monitoring System (LTTFMS) data collected during Period A (13 days - 10/22/20 - 11/4/20). The central component of the Verdant Power Free Flow System is a three-bladed horizontal-axis turbine. The turbine is equipped with a composite rotor with three fixed-pitch blades that rotate at a slow and regular rate (approx. 32 rpm), well below normal water vessel propeller speeds and conventional hydropower turbine blade speeds. The TriFrame mount is the structural mount that holds the three Verdant Power three-bladed horizontal-axis turbines.

Explore related subjects

16 TIDAL AND WAVE POWER axial turbine data energy Hydrokinetic Marine material performance MHK Mount perfomance power RITE structural mount structure performance stucture Triframe

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Colby, Jonathan, Corren, Dean, Adonizio, Mary Ann, Paradis, Leighton. 2021-11-12. TriFrame Mount Structural Performance - Period A. https://doi.org/10.15473/1832142

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Applied Research and Development to Support Open-Water Testing at PacWave

This report presents the findings from Task 7 of the project, which focused on improving the performance and reliability of wave energy converters (WECs) under real-world conditions, particularly in the presence of marine growth (biofouling) and system faults. The work was conducted using the RM3 point absorber WEC model, a marine current turbine based on the SHARKS project model, and the WEC-Sim simulation platform, and it included both modeling and control system development.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

Power performance and loads characterization of laboratory-scale cross-flow rotors fabricated using additive manufacturing

Tidal energy conversion is a relatively new application for additive manufacturing (AM), where the focus has been on fabricating axial-flow turbine blades. AM techniques add material precisely where it is needed, creating more complex shapes with less waste. Cross-flow rotor geometry presents an opportunity for AM to improve rotor performance by fabricating features that cannot be created economically via conventional manufacturing. The challenges associated with using AM in cross-flow design include water resistance and degradation over time while retaining a level of quality equivalent to conventionally machined parts. In this work, AM materials were tested by environmentally conditioning samples in a seawater tank for 5 months, followed by performance and phase-resolved load testing of laboratory-scale rotors in a hydraulic flume. We found that while metals like titanium and Inconel have excellent performance in marine environments, achieving the desired geometry and performance is difficult. Thermoplastics degraded in seawater but were easier to form into desired geometries and could exceed the performance of an aluminum control rotor. Warping and surface finish were significant detractors from AM rotor performance. These results suggest that the primary benefits of using AM for cross-flow rotors is to quickly fabricate and test unconventional rotor geometries.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

Rapid Identification of Joint Failure in Marine Energy Devices

This presentation discusses an alternative approach for identifying potential failures in marine energy converters without requiring a large number of time-domain simulations.

16 TIDAL AND WAVE POWER↗