Search NASA⌕ Search

DOE OSTI · 1998173

Selective Catalytic Behavior Induced by Crystal–Phase Transformation in Well–Defined Bimetallic Pt–Sn Nanocrystals

Abstract

The Pt-Sn bimetallic system is a much studied and commercially used catalyst for propane dehydrogenation. The traditionally prepared catalyst, however, suffers from inhomogeneity and phase separation of the active Pt–Sn phase. Colloidal chemistry offers a route for the synthesis of Pt–Sn bimetallic nanoparticles (NPs) in a systematic, well-defined, tailored fashion over conventional methods. Here, the successful synthesis of well-defined ≈2 nm Pt, PtSn, and Pt 3 Sn nanocrystals with distinct crystallographic phases is reported; hexagonal close packing (hcp) PtSn and fcc Pt 3 Sn show different activity and stability depending on the hydrogen-rich or poor environment in the feed. Moreover, face centred cubic (fcc) Pt 3 Sn/Al 2 O 3 , which exhibited the highest stability compared to hcp PtSn, shows a unique phase transformation from an fcc phase to an L1 2 -ordered superlattice. Contrary to PtSn, H 2 cofeeding has no effect on the Pt 3 Sn deactivation rate. Finally, the results reveal structural dependency of the probe reaction, propane dehydrogenation, and provide a fundamental understanding of the structure–performance relationship on emerging bimetallic systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Werghi, Baraa, Wu, Liheng, Ebrahim, Amani M., Chi, Miaofang, Ni, Haoyang, Cargnello, Matteo, Bare, Simon R.. 2023-02-20. Selective Catalytic Behavior Induced by Crystal–Phase Transformation in Well–Defined Bimetallic Pt–Sn Nanocrystals. https://doi.org/10.1002/smll.202207956

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗