Search NASA⌕ Search

DOE OSTI · 21294052

A hybrid encapsulation method for organic electronics

Abstract

We report a thin-film encapsulation method for organic electronics that combines the deposition of a layer of SiO{sub x} or SiN{sub x} (100 nm) by plasma enhanced chemical vapor deposition followed by a layer of Al{sub 2}O{sub 3} (10-50 nm) by atomic layer deposition and a 1-{mu}m-thick layer of parylene by chemical vapor deposition. The effective water vapor transmission rates of the encapsulation was (2{+-}1)x10{sup -5} g/m{sup 2} day at 20 deg. C and 50% relative humidity (RH). The encapsulation was integrated with pentacene/C{sub 60} solar cells, which showed no decrease in conversion efficiency after 5800 h of exposure to air demonstrating the effectiveness of the encapsulation methodology.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kim, N, Graham, S, Potscavage, Jr, W J, Domercq, B, Kippelen, B. 2009-04-20. A hybrid encapsulation method for organic electronics. https://doi.org/10.1063/1.3115144

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗