Search NASA⌕ Search

DOE OSTI · 22992127

String-Like Transport in Superionic Conductors

Abstract

Superionic or fast-ion conductors are multicomponent solid-state systems in which one sublattice becomes mobile and exhibits extraordinarily high ionic conductivity before the melting within the solid state. Uranium dioxide (UO{sub 2}) - the fuel material of choice in most nuclear reactors - shows superionic behavior, although the mechanism of fast ion transport of the mobile oxygen ions, and its implication, is not well-understood. UO{sub 2} belongs to the category of Type II superionics wherein the conductivity rises gradually with increasing temperature, without an attendant phase change. In a recent work, using atomistic simulations and available neutron and x-ray scattering data, we have shown that all Type II superionic conductors exhibit a well-defined onset of dynamic disorder at a characteristic temperature T{sub α} = (∼2000 K for UO{sub 2}). Unlike the familiar superionic or Bredig transition temperature T{sub α} (∼2650 K for UO{sub 2}) that is associated with a second-order thermodynamic phase transition, T{sub α} represents an order-disorder (O-D) transition that marks a structural and kinetic crossover from a crystalline state to a semi-ordered state. In the temperature range between T{sub α} and T{sub λ}, the oxygen ions in UO{sub 2} exhibit jammed dynamics even though the mobile oxygen ions favor collective hopping from one native crystalline site to another. This cooperative dynamics manifests as dynamical heterogeneity (DH) - the tendency of highly mobile oxygen ions to form dynamic clusters, and dynamical facilitation (DF) - the mode of system relaxation facilitated solely through the kinetic ions transferring their mobility to neighboring ions. The jammed dynamics portrayed by the oxygen ions is similar to that observed in supercooled liquids and glassy materials, and other disordered systems such as granular media and polymers. In the current work, we probe the ionic dynamics in UO{sub 2} for the presence of another ubiquitous signature of glassy and jammed systems, namely, the one-dimensional string-like motion of the mobile species. Unlike the uncorrelated vacancy exchanges and interstitial migration in defected crystalline states, the string motion is a collective mechanism among the mobile species wherein each member of the string induces the next member to move in a correlated, sequential fashion. Using atomistic simulations, we demonstrate that oxygen ions in UO{sub 2} are transported through a string-like mechanism in the temperature range between T{sub α} and T{sub λ}, and the probability distribution of occurrence of the strings varies exponentially with string length. The discovery of string-like motion of the oxygen ions is somewhat surprising given the crystalline underpinning of the mobile species and the dynamic tendency of the oxygen ions to hop between lattice sites. In addition to dynamical heterogeneity and dynamical facilitation, our work has added one more entry, namely the occurrence of string-like transport, to the list of phenomenological similarities between superionic conductors and jammed systems. Using atomistic simulations, we have established the occurrence of string-like ionic motion among the oxygen ions in UO{sub 2} between temperatures T{sub α} - the order-disorder (O-D) transition temperature, and T{sub λ} - the Bredig transition temperature. As observed in other jammed systems, the length of the strings is observed to have an exponential distribution implying that the probability of occurrence of a smaller string is much higher than that of a longer string. Interestingly, using Temperature-Accelerated Dynamics (TAD) we have also established that string-like hopping takes place at temperatures lower than T{sub α}; these results will be published elsewhere. (authors)

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Annamareddy, Ajay, Eapen, Jacob. 2016-06-15. String-Like Transport in Superionic Conductors. https://searchnasa.com/record/osti%3A22992127/string-like-transport-in-superionic-conductors

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Evaluating transient fission gas release in high burnup light water reactor fuel during loss of coolant accident conditions via new capabilities

In this work, the role of transient fission gas release (tFGR) in the cladding burst behavior of high burnup fuel during a loss-of-coolant accident (LOCA) in commercial light water reactors was further investigated via the use of a new apparatus. During the LOCA-related temperature ramps of high burnup fuel, the release of fission gases exceeds the steady-state release observed under normal operating conditions. An enhancement was made to the Oak Ridge National Laboratory Severe Accident Test Station (SATS) to probe the various factors influencing tFGR. Experiments were performed on commercially irradiated, zirconium-clad uranium dioxide fuel, and this paper details the design of the experimental setup, the initial test results, and the subsequent post-test analyses. Notably, the first test on high burnup fuel demonstrated a LOCA-relevant tFGR of 5.3% from an unpressurized fuel segment. The ultimate tFGR was 10.7% for beyond LOCA conditions. A follow-up test on similar fuel revealed a tFGR of 12.6% under comparable conditions. Microstructural analysis and an analysis of the released gas provide some insight regarding the source of tFGR in the fuel. Finally, a grain boundary bubble model may aid in the interpretation of the results and offer a guide for future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of ceramic fuel powder packing fractions to support INFLUX

Triply periodic minimal surface (TPMS)-based structures show marked potential in novel nuclear reactor fuel designs, as their high surface area-to-volume ratio increases the efficiency of heat transfer out of the fuel, enabling safer, more innovative reactor designs. This milestone report addresses the role of dUO 2 powder processing route on the fill behavior of TPMS-based cladding shells to understand and advance the feasibility of manufacturing TPMS-based nuclear fuel forms. dUO 2 powder was processed through either a dry granulation route, varying consolidation pressure, or through milling, varying milling time, milling method and milled size distribution. The lowest tapped bulk densities (TBD), but best powder flowabilities, were obtained when testing unprocessed dUO 2 powder which was prone to self-agglomeration and formed low-density spheroids. The highest TBD and lowest flowabilities were obtained when using powder produced by hammer-milling dUO 2 powder to pass through a 200-mesh sieve, which led to particles with angular morphologies. Powder produced by dry granulation exhibited TBD that varied according to the consolidation pressure used to form the initial pellets and exhibited improved flowabilities when compared to hammer-milled material. Because of the large span of granule sizes formed as well as the irregular shape associated with the granules, a packing fraction of 0.69 was achieved, exceeding the analytical solution for random close packing of mono-sized spheres. TPMS polymer shells were loaded with unprocessed, granulated, and hammer-milled dUO 2 powders, and their qualitative packing behaviors were analyzed using x-ray computed tomography (xCT). TBDs calculated after loading TPMS polymer shells were 10-20% lower when compared to tapped bulk density measurements taken in a glass graduated cylinder, indicating a non-trivial impact on the tapped bulk density of either the TPMS channel size, TPMS channel surface material, powder cohesiveness, or a combination of the two parameters. A metallic zircaloy-4 TPMS shell will be loaded with hammer-milled dUO 2 powder upon receipt of the shell from Oak Ridge National Laboratory (ORNL) and shipped to Idaho National Labs (INL) for subsequent hot isostatic pressing (HIP) densification experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗