A Gaussian process autoregressive model capturing microstructure evolution paths in a Ni–Mo–Nb alloy

Abstract

Additive manufacturing is increasingly being employed to produce components of complex geometries in structural alloys because of the expected energy savings associated with the near-net-shape capability and the ability to build in novel internal features that are not possible with many conventional manufacturing approaches. However, because of the extreme thermal conditions encountered, the non-equilibrium microstructures produced during powder bed-based additive manufacturing processes must be subjected to custom post-heat treatment processes to recover the target mechanical properties. Phase-field models and simulation techniques have matured to a state where the microstructure evolution paths, and the morphologies of the resulting precipitate phases can be predicted reasonably accurately, considering alloy-specific thermodynamic and kinetic aspects of the nucleation and growth processes. However, phase-field simulations are computationally intensive, which precludes the ability to apply the simulations directly to the length scale of the entire component. Therefore, it is highly desirable to develop low-computational-cost surrogate models that effectively capture the physics at the microstructural length scale, while facilitating the design of optimized processing conditions resulting in location-specific targeted microstructures at the component scale. The work presented here demonstrates the application of the materials knowledge system framework to develop a surrogate model that effectively captures the microstructural path during annealing of a Ni–Mo–Nb alloy containing different Mo and Nb compositions known to segregate during solidification under additive manufacturing conditions. Specifically, the surrogate model built in this work is based on a Gaussian process autoregressive model informed by statistical representation of simulated microstructures using two-point correlations and dimensionality reduction through principal component analysis. In conclusion, this surrogate model is shown to capture the bifurcation of the microstructural path during precipitation, which yields a microstructure dominated by the $\gamma^{\prime\prime}$ phase at high Nb concentrations and the $\delta$ phase at low Nb concentrations.