Search NASA⌕ Search

DOE OSTI · 2446894

The Mu2e Digitizer ReAdout Controller (DiRAC): characterization and radiation hardness

Abstract

The Mu2e experiment at Fermilab will search for the neutrino-less coherent conversion of a muon into an electron in the field of a nucleus. Mu2e detectors comprise a straw tracker, an electromagnetic calorimeter and a veto for cosmic rays. The calorimeter employs 1348 Cesium Iodide crystals readout by silicon photo-multipliers and fast front-end, and digitization electronics. The digitization board is named DiRAC (Digitizer ReAdout Controller) and 140 cards are needed for the readout of the full calorimeter. The DiRACs are hosted in crates located on the external surface of calorimeter disks, inside the detector solenoid cryostat and must sustain very high radiation and magnetic field so it was necessary to fully qualify it. Several version of prototypes were validated for operation in a high-vacuum (10−4 Torr) and under a 1T magnetic field. An extensive radiation hardness qualification campaign, carried out with photons, 14 MeV neutron beams, and 200 MeV protons, certified the DiRAC design to sustain doses up to 12 Krad, neutron fluences up to ∼ 1011 1 MeV neq/cm2, and very low occurrences of single-event effects. The qualification campaigns and quality assurance procedures will be reviewed.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Atanov, N., Baranov, V., Bloise, C., Borrel, L., Ceravolo, S., Cervelli, F., Colao, F., Cordelli, M., Corradi, G., Davydov, Yu.I., Di Falco, S., Diociaiuti, E., Donati, S., Echenard, B., Fedeli, P., Ferrari, C., Gioiosa, A., Giovannella, S., Giusti, V., Glagolev, V., Hampai, D., Happacher, F., Hitlin, D. G., Martini, M., Middleton, S., Miscetti, S., Morescalchi, L., Paesani, D., Pasciuto, D., Pedreschi, E., Porter, F., Raffaelli, F., Saputi, A., Sarra, I., Spinella, F., Taffara, A., Zhu, R. Y.. 2024-09-12. The Mu2e Digitizer ReAdout Controller (DiRAC): characterization and radiation hardness. https://doi.org/10.1016/j.nima.2024.169688

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design and Integration of High Precision Superconducting Magnet Power Supply Systems

This paper reviews the design and integration approach being taken to power more than 400 superconducting magnets in Electron Ion Collider (EIC) by power supplies ranging from 20V to 400V and 100A to 18kA. A major challenge is to integrate existing legacy power supplies with new high current systems and maximize performance and reduce costs. Successful implementation requires coordinated integration of power convertors, current regulation, quench protection, energy extraction, machine protection, controls and existing accelerator infrastructure.

43 PARTICLE ACCELERATORS↗

Searching for the Most Harmful Field Errors in the HSR IR Superconducting Magnets

In this project, we improve beam stability for the Electron-Ion Collider. Magnetic field errors can reduce beam stability, making it essential to identify the field errors that have the greatest impact on accelerator performance. However, this is particularly challenging because beam stability depends on the complex interactions of many magnetic field errors, resulting in a high-dimensional and nonlinear optimization problem. We determine which field errors are the most influential for the large physical aperture superconducting magnet B2PF, a critical magnet in the Interaction Region (IR) in the Hadron Storage Ring (HSR). We complete and analyze nearly 30,000 simulations on the Brookhaven National Laboratory Linux Cluster by varying 18 nonlinear magnetic field errors. We evaluate beam stability using the dynamic aperture and the tune diffusion. We identify the field errors that most strongly influence beam stability and establish quantitative field error tolerances that improve accelerator performance.

43 PARTICLE ACCELERATORS↗