Search NASA⌕ Search

DOE OSTI · 2585289

Increased electron, positron, and x-ray production from high intensity laser interactions using micro-wire targets

Abstract

We report increases in energetic electrons, positrons, and x-rays emitted from high-intensity laser interactions (10 18−20 W/cm 2 ) with structured silicon micro-wires on the surface of a 1 mm gold converter target using a 10 ps laser pulse. A total of four different wire configurations are tested, where the gaps (7–28 μm) between the wires and the thicknesses (3–6 μm) of the wires are varied, while the height remains constant (⁠ ~25 μm). We observe the largest enhancement in electrons, positrons, and x-rays with the sparsest wire configurations. The electron temperature (T e ≈6 MeV) remains consistent across all shots, regardless of whether wires or planar targets are used. This suggests that the observed enhancement is due to increased laser light absorption by the accelerated electrons over a long scale length. Two-dimensional particle-in-cell simulations confirm that absorption is significantly enhanced with the wire target. Additionally, specific simulations examining laser pointing on different parts of the wire structure reveal that, while the final electron spectrum remains largely insensitive, the angular distribution is highly sensitive to these variations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rusby, Dean R. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000173886226), Lemos, Nuno Candeias [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000267815672), Chen, Hui [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000201811695), Kemp, Andreas [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000345186382), Longman, Andrew [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000298105059), Kerr, Shaun [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:000000034822564X), Aghedo, Adeola [Florida A & M University, Tallahassee, FL (United States)] (ORCID:0000000199092213), Wilks, Scott [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000272682683), Williams, G. Jackson [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000264955696), Bude, Jeffrey [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)], Mackinnon, Andrew [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000243802906). 2025-07-03. Increased electron, positron, and x-ray production from high intensity laser interactions using micro-wire targets. https://doi.org/10.1063/5.0268549

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Optimizing time integration for accurate recovery of shockwave interface location in radiography

We present simulations and experiments of time integrated radiographic imaging of a moving 1D shock wave front and a quantitative method for determining the statistical error in locating the shock front as a function of integration time and noise in the radiograph. We discuss the trade-off between increasing motion blur, which leads to decreased shock front location certainty, and increasing signal-to-noise, which leads to improved image quality with increasing integration time. We find an optimum integration time between a short integration time, where noise limits the error, and a long integration time, where motion blurring limits the error. This methodology can be used to tune experimental configurations to obtain the highest quality radiograph for a given experimental configuration.

Bremsstrahlung↗

Spatially and temporally resolved plasma parameter estimations of laser heated MagLIF relevant gas pipes at NIF

The ability to control laser pre-heat is an integral part of the inertial confinement fusion concept known as Magnetized Liner Inertial Fusion. This process is studied at the National Ignition Facility (NIF) where 4 of the 192 laser beams are propagated through a 1-cm long gas cell where they deposit >20 kJ of energy into the gaseous fuel via inverse bremsstrahlung absorption. This process ionizes the gas, producing a plasma that follows behind the laser front and expands over the radius of the cell. Emission from this plasma, as viewed by a gated x-ray detector, can be used to build spatially and temporally resolved estimations of the pre-heat plasma's density and temperature profiles. This can then be used to estimate the plasma pressure, internal energy, and radiation losses. Estimations show the evolution of the plasma in magnetized and unmagnetized gas cells filled with ambient temperature neopentane (C5H12) +1% Ar, as well as unmagnetized cryogenically cooled (32 K) deuterium +1% Ne filled targets. This analysis shows the effects of initial gas-fill density, composition, and axial magnetization on the time-dependent plasma parameters. Previously, these parameters at the NIF had not been experimentally characterized, and these estimations provided a potential new means of testing radiation magneto-hydrodynamic predictive capability models. Results in unmagnetized targets have strong agreement with simulations. However, in targets with a 19 T applied axial magnetic field, this method yields electron temperatures up to 100% hotter than those predicted by HYDRA codes.

Bremsstrahlung↗