Enhanced thermal response of 3D-printed bilayer hydrogels via nanoclay incorporation

Klincewicz, Francis (ORCID:0009000365339355); Kalidindi, Subhash (ORCID:000000022869701X); Liu, Siyuan (ORCID:0000000324581287); Sangroula, Kritee; Korley, LaShanda (ORCID:0000000282665000)

doi:10.1039/d5me00018a

DOE OSTI · 3673200

Enhanced thermal response of 3D-printed bilayer hydrogels via nanoclay incorporation

Klincewicz, Francis (ORCID:0009000365339355)·Kalidindi, Subhash (ORCID:000000022869701X)·Liu, Siyuan (ORCID:0000000324581287)·Sangroula, Kritee·Korley, LaShanda (ORCID:0000000282665000)

View original source ↗Read source document ↗Export metadata ↓

Abstract

Nanoclay enhances the actuation of thermally-responsive 3D-printed hydrogel bilayers.

Explore related subjects

Chemistry Engineering Materials Science Science & Technology - Other Topics

Keep this discovery

BibTeX RIS

Klincewicz, Francis (ORCID:0009000365339355), Kalidindi, Subhash (ORCID:000000022869701X), Liu, Siyuan (ORCID:0000000324581287), Sangroula, Kritee, Korley, LaShanda (ORCID:0000000282665000). 2025-01-01. Enhanced thermal response of 3D-printed bilayer hydrogels via nanoclay incorporation. https://doi.org/10.1039/d5me00018a

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Chemistry subject Engineering subject Materials Science subject

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related reports

DOE OSTI2024

Advancements in 2D MXene-based supercapacitor electrodes: synthesis, mechanisms, electronic structure engineering, flexible wearable energy storage for real-world applications, and future prospects

Supercapacitors are widely recognized as a favorable option for energy storage due to their higher power density compared to batteries, despite their lower energy density.

Chemistry↗

DOE OSTI1963

Bibliography on Nuclear Reactor Fuel Reprocessing and Waste Disposal – Volume 6: Process Chemistry and Engineering

Section 6 of 8 sections comprising a bibliography on reactor fuel reprocessing and waste disposal is presented. The complete collection includes about 7000 abstracts, most of which were obtained from Nuclear Science Abstracts. Most of the material dates from the 1955 Geneva Conference to the present.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

The effect of dogbone sample size in the tensile testing of TATB-based plastic‑bonded explosive materials

Mechanical properties are of interest for many plastic‑bonded explosive (PBX) materials with tensile properties being of particular interest. Direct tensile measurements using dogbone-shaped samples are considered the gold standard, but they are fairly large, making testing more costly and less desirable from a safety perspective. We investigated whether the measured tensile strength depends on the dogbone specimen size, which to our knowledge, has not been reported in the literature for PBX materials. Understanding this should inform the feasibility of employing smaller samples and how sample size should be considered when comparing PBX dogbone values in the literature. The TATB-based PBX dogbone sample size was varied by (a) scaling all dimensions proportionally and (b) varying only the length of the samples. It was observed that the measured tensile peak stress (strength) was a function of the sample size, and was more dependent on the diameter (cross-sectional area) than the length of the samples. Since peak stress is calculated as peak force normalized to the diameter of the sample, one might not expect an explicit diameter dependence for the peak stress. Therefore, these results suggest there may be an additional strengthening effect as the sample diameter is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗