Search NASA⌕ Search

DOE OSTI · 988521

Towards improved CZT crystals.

Abstract

Past experimental efforts to improve CZT crystals for gamma spectrometer applications have been focused on reducing micron-scale defects such as tellurium inclusions and precipitates. While these micron-scale defects are important, experiments have shown that the micron-scale variations in transport can be caused by the formation and aggregation of atomic-scale defects such as dislocations and point defect clusters. Moreover, dislocation cells have been found to act as nucleation sites that cause the formation of large precipitates. To better solve the uniformity problem of CZT, atomic-scale defects must be understood and controlled. To this end, we have begun to develop an atomistic model that can be used to reveal the effects of small-scale defects and to guide experiments for reducing both atomic- and micron-scale (tellurium inclusions and precipitates) defects. Our model will be based upon a bond order potential (BOP) to enable large-scale molecular dynamics simulations of material structures at a high-fidelity level that was not possible with alternative methods. To establish how BOP improves over existing approaches, we report here our recent work on the assessment of two representative literature CdTe interatomic potentials that are currently widely used: the Stillinger-Weber (SW) potential and the Tersoff-Rockett (TR) potential. Careful examinations of phases, defects, and surfaces of the CdTe system were performed. We began our study by using both potentials to evaluate the lattice constants and cohesive energies of various Cd, Te, and CdTe phases including dimer, trimer, chain, square, rhomboid, tetrahedron, diamond-cubic (dc), simple-cubic (sc), body-centered-cubic (bcc), face-centered cubic (fcc), hexagonal-close-packed (hcp), graphite-sheet, A8, zinc-blende (zb), wurtzite (wz), NaCl, CsCl, etc. We then compared the results with our calculations using the density functional theory (DFT) quantum mechanical method. We also evaluated the suitability of the two potentials to predict the surface reconstructions and surface energies, various defect configurations and defect energies (interstitials and voids), elastic constants, and melting temperatures of different phases. We found that both potentials predicted incorrect energy trends as compared with those predicted by the DFT method. Most seriously, both potentials predicted incorrect lowest energy phases. These studies clearly showed that the existing potentials are not sufficient for correctly predicting the charge transport properties of CdTe demonstrating the need for a new potential. We anticipate that our BOP method will overcome this problem and will accelerate the discovery of a synthesis approach to produce improved CZT crystals.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Zimmerman, Jonathan A, Ward, Donald K, Doty, F Patrick, Wong, Bryan Matthew, Zhou, Xiao Wang. 2010-03-01. Towards improved CZT crystals.. https://www.osti.gov/biblio/988521

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗