Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bayesian Framework”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Structural response reconstruction using a system-equivalent singular vector basis

Here, this paper develops a novel method for reconstructing the full-field response of structural dynamic systems using sparse measurements. The singular value decomposition is applied to a frequency response matrix relating the structural response to physical loads, base motion, or modal loads. The left singular vectors form a non-physical reduced basis that can be used for response reconstruction with far fewer sensors than existing methods. The contributions of the singular vectors to measured response are termed singular-vector loads (SVLs) and are used in a regularized Bayesian framework to generate full-field response estimates and confidence intervals. The reconstruction framework is applicable to the estimation of single data records and power spectral densities from multiple records. Reconstruction is successfully performed in configurations where the number of SVLs to identify is less than, equal to, and greater than the number of sensors used for reconstruction. In a simulation featuring a seismically excited shear structure, SVL reconstruction significantly outperforms modal FRF-based reconstruction and successfully estimates full-field responses with as few as two uniaxial accelerometers. SVL reconstruction is further verified in a simulation featuring an acoustically excited cylinder. Finally, response reconstruction and uncertainty quantification are performed on an experimental structure with three shaker inputs and 27 triaxial accelerometer outputs.

42 ENGINEERING↗

Detection of Vegetation Trends in Highly Variable Environments After Grazing Exclusion in Mongolia

Aims: Environmental variability (e.g. in precipitation) has a large effect on vegetation dynamics, and this often makes it difficult to assess the recovery of vegetation after a disturbance. In this study, we assessed vegetation recovery trends in response to grazing exclusion while considering for the annual environmental variability. Location: Two regions with highly variable precipitation: a steppe near Mandalgobi, in Mongolia's Central Gobi province, and a desert steppe near Bulgan, in Mongolia's South Gobi province. Methods: Changes in vegetation were observed along grazing gradients at the above two sites, and vegetation thresholds were identified. We established reference plots in pre-threshold areas along the grazing gradients. We removed the impact of livestock grazing at various locations along the grazing gradients by establishing exclosures, and investigated vegetation from 2005 to 2013. We developed a smoothed hierarchical model within a Bayesian framework, and examined the effect of grazing exclusion on vegetation, focusing especially on the extent of grass cover recovery. In addition, we compared soil nutrient conditions in the reference plots and inside and outside each exclosure along the grazing gradients. Results: Temporal trends in the cover of perennial grass in each plot inside and outside of the exclosures largely coincided, irrespective of grazing intensity, and exclosure had no effect (Bulgan) or a negative effect (Mandalgobi) on vegetation recovery. Soil nutrient content was not significantly affected by exclosure at a given distance from the grazing source, but decreased significantly with decreasing grazing intensity. Thus, recovery of the land from a post-threshold state may not be apparent even after 9 yr of grazing exclusion in environments with highly variable precipitation. Conclusion: The effect of exclosure duration on perennial grass cover was limited, even after controlling for environmental variability. Once a vegetation threshold has been crossed, merely removing livestock from the landscape may not be sufficient for that area to recover.

Bayesian statistics;Drought;Environmental variabil↗

Multidimensional sum-up rounding for integer programming in optimal experimental design

Here we present a numerical method for approximating the solution of convex integer programs stemming from optimal experimental design. The statistical setup consists of a Bayesian framework for linear inverse problems for which the direct relationship is described by a discretized integral equation. Specifically, we aim to find the optimal sensor placement from a set of candidate locations where data are collected with measurement error. The convex objective function is a measure of the uncertainty, described here by the trace or log-determinant of the posterior covariance matrix, for the discretized linear inverse problem solution. The resulting convex integer program is relaxed, producing a lower bound. An upper bound is obtained by extending the sum-up rounding approach to multiple dimensions. For this extension, we analyze its accuracy as a function of the discretization mesh size for a rectangular domain. We show asymptotic optimality of the integer solution defining the upper bound for different experimental design criteria (A- and D-optimal), by proving the convergence to zero of the gap between the upper and lower bounds as the mesh size goes to zero. The technique is illustrated on a two-dimensional gravity surveying problem for both A-optimal and D-optimal sensor placement where our designs yield better results compared with a thresholding rounding approach.

97 MATHEMATICS AND COMPUTING↗

Statistical inference of anomalous thermal transport with uncertainty quantification for interpretive 2D SOL models

The critical task of inferring anomalous cross-field transport coefficients is addressed in simulations of boundary plasmas with fluid models. A workflow for parameter inference in the UEDGE fluid code is developed using Bayesian optimization with parallelized sampling and integrated uncertainty quantification. In this workflow, transport coefficients are inferred by maximizing their posterior probability distribution, which is generally multidimensional and non-Gaussian. Uncertainty quantification is integrated throughout the optimization within the Bayesian framework that combines diagnostic uncertainties and model limitations. As a concrete example, we infer the anomalous electron thermal diffusivity $\chi_\perp$ from an interpretive 2D model describing electron heat transport in the conduction-limited region with radiative power loss. The workflow is first benchmarked against synthetic data and then tested on H-, L-, and I-mode discharges to match their midplane temperature and divertor heat flux profiles. We demonstrate that the workflow efficiently infers diffusivity and its associated uncertainty, generating 2D profiles that match 1D measurements. Future efforts will focus on incorporating more complicated fluid models and analyzing transport coefficients inferred from a large database of experimental results.

Bayesian optimization↗

Constraining the Milky Way Mass Profile with Phase-space Distribution of Satellite Galaxies

We estimate the Milky Way (MW) halo properties using satellite kinematic data including the latest measurements from Gaia DR2. With a simulation-based 6D phase-space distribution function (DF) of satellite kinematics, we can infer halo properties efficiently and without bias, and handle the selection function and measurement errors rigorously in the Bayesian framework. Applying our DF from the EAGLE simulation to 28 satellites, we obtain an MW halo mass of $M={1.23}_{-0.18}^{+0.21}\times {10}^{12}{M}_{\odot }$ and a concentration of $c={9.4}_{-2.1}^{+2.8}$ with the prior based on the M–c relation. The inferred mass profile is consistent with previous measurements but with better precision and reliability due to the improved methodology and data. Potential improvement is illustrated by combining satellite data and stellar rotation curves. Using our EAGLE DF and best-fit MW potential, we provide much more precise estimates of the kinematics for those satellites with uncertain measurements. Compared to the EAGLE DF, which matches the observed satellite kinematics very well, the DF from the semi-analytical model based on the dark-matter-only simulation Millennium II (SAM-MII) over-represents satellites with small radii and velocities. We attribute this difference to less disruption of satellites with small pericenter distances in the SAM-MII simulation. Finally, by varying the disruption rate of such satellites in this simulation, we estimate a ~5% scatter in the inferred MW halo mass among hydrodynamics-based simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Disentangling the Black Hole Mass Spectrum with Photometric Microlensing Surveys

Abstract From the formation mechanisms of stars and compact objects to nuclear physics, modern astronomy frequently leverages surveys to understand populations of objects to answer fundamental questions. The population of dark and isolated compact objects in the Galaxy contains critical information related to many of these topics, but is only practically accessible via gravitational microlensing. However, photometric microlensing observables are degenerate for different types of lenses, and one can seldom classify an event as involving either a compact object or stellar lens on its own. To address this difficulty, we apply a Bayesian framework that treats lens type probabilistically and jointly with a lens population model. This method allows lens population characteristics to be inferred despite intrinsic uncertainty in the lens class of any single event. We investigate this method’s effectiveness on a simulated ground-based photometric survey in the context of characterizing a hypothetical population of primordial black holes (PBHs) with an average mass of 30 M ⊙ . On simulated data, our method outperforms current black hole (BH) lens identification pipelines and characterizes different subpopulations of lenses while jointly constraining the PBH contribution to dark matter to ≈25%. Key to robust inference, our method can marginalize over population model uncertainty. We find the lower mass cutoff for stellar origin BHs, a key observable in understanding the BH mass gap, particularly difficult to infer in our simulations. This work lays the foundation for cutting-edge PBH abundance constraints to be extracted from current photometric microlensing surveys.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Filling the Gaps: A Bayesian Mixture Model for Imputing Missing Soil Water Content Data

ABSTRACT Soil water content (SWC) data are central to evaluating how soil moisture varies over time and space and influences critical plant and ecosystem functions, especially in water‐limited drylands. However, sensors that record SWC at high frequencies often malfunction, leading to incomplete timeseries and limiting our understanding of dryland ecosystem dynamics. We developed an analytical approach to impute missing SWC data, which we tested at six eddy flux tower sites along an elevation gradient in the southwestern United States. We impute missing data as a mixture of linearly interpolated SWC between the observed endpoints of a missing data gap and SWC simulated by an ecosystem water balance model (SOILWAT2). Within a Bayesian framework, we allowed the relative utility (mixture weight) of each component (linearly interpolated vs. SOILWAT2) to vary by depth, site and gap characteristics. We explored “fixed” weights versus “dynamic” weights that vary as a function of cumulative precipitation, average temperature, and time since the start of the gap. Both models estimated missing SWC data well ( R 2 = 0.70–0.88 vs. 0.75–0.91 for fixed vs. dynamic weights, respectively), but the utility of linearly interpolated versus SOILWAT2 values depended on site and depth. SOILWAT2 was more useful for more arid sites, shallower depths, longer and warmer gaps and gaps that received greater precipitation. Overall, the mixture model reliably gap‐fills SWC, while lending insight into processes governing SWC dynamics. This approach to impute missing data could be adapted to accommodate more than two mixture components and other types of environmental timeseries.

Ogle, Kiona [School of Informatics, Computing, and↗

Statistical interpretation of the Amerithrax “morph” assay results

In the Amerithrax investigation PCR–based “morph assays” were used to link the anthrax letters with the RMR–1029 flask at USAMRIID. Quantitative data reported for several of these assays are not consistent with Poisson sampling statistics, but instead exhibit “Taylor's Law” behavior where the variance greatly exceeds the mean. A plausible statistical model for this behavior can explain the large number of observed negative and “inconclusive” findings, and implies a high likelihood that a repository sample could contain a “morph” mutant at concentrations well above the nominal detection limit but nonetheless give a negative or inconclusive test result. A Bayesian framework relates the assay results to the probability that a sample actually contains all four morph mutants, even though it tested negative for at least one. The analysis implies that the observed false negative rate actually does not significantly weaken the conclusion that the morph assays correctly excluded all but the stocks derived from RMR–1029 as possible sources of the letter powders, at least when the test results were unambiguous. In conclusion, these findings expand upon and resolve some of the issues cited in recent reviews, and indicate the importance of developing a rigorous statistical framework for interpreting “morph” assay data.

59 BASIC BIOLOGICAL SCIENCES↗

Activation product interpretation of structural material for fast critical assemblies

This work evaluates whether activation products in stainless steel components can be used to infer initial conditions (i.e. alloy composition, position within the fluence, etc.) and the associated uncertainties in a fast neutron irradiation. Activation measurements of stainless steel and elemental components were obtained through a Flattop critical assembly irradiation experiment. A forward model was developed, utilizing MCNP6.1 and FISPACT ii, to estimate activation product concentrations from several input parameters: alloy composition, source specifications, and foil positioning. While some of the calculated activation product concentrations agreed fairly well with measurements, some isotopics (i.e. 57 Co) had large discrepancies. It became clear that uncertainties in both measurements and nuclear data drove this divergence for select isotopics, and the quantification of this impact was needed. By treating both experimental measurement and nuclear data uncertainty in a Bayesian framework, it was possible to infer unknowns from given activation ratios. The developed approach showed promise in constraining mass parameters, but degeneracy existed when considering position within the neutron flux. Higher threshold reactions could potentially break the degeneracy, such as 57 Co, but uncertainty estimation needs to be better resolved for those isotopes.

36 MATERIALS SCIENCE↗

FlowPM: Distributed TensorFlow implementation of the FastPM cosmological N-body solver

Here, we present FlowPM, a Particle-Mesh (PM) cosmological N-body code implemented in Mesh-TensorFlow for GPU-accelerated, distributed, and differentiable simulations. We implement and validate the accuracy of a novel multi-grid scheme based on multiresolution pyramids to compute large-scale forces efficiently on distributed platforms. We explore the scaling of the simulation on large-scale supercomputers and compare it with corresponding Python based PM code, finding on an average 10x speed-up in terms of wallclock time. We also demonstrate how this novel tool can be used for efficiently solving large scale cosmological inference problems, in particular reconstruction of cosmological fields in a forward model Bayesian framework with hybrid PM and neural network forward model. We provide skeleton code for these examples and the entire code is publicly available at https://github.com/modichirag/flowpm[Formula presented].

79 ASTRONOMY AND ASTROPHYSICS↗

Sampling-based Uncertainty Quantification in Deconvolution of X-ray Radiographs

In imaging applications that focus on quantitative analysis{such as X-ray radiography in the security sciences--it is necessary to be able to reliably estimate the uncertainties in the processing algorithms applied to the image data, and deconvolving the system blur out of the image is usually an essential step. In this work we solve the deconvolution problem within a Bayesian framework for edge-enhancing reconstruction with uncertainty quantification. The likelihood is a normal approximation to the Poisson likelihood, and the prior is generated from a classical total variation regularized Poisson deconvolution. Samples from the corresponding posterior distribution are computed using a Markov chain Monte Carlo approach, giving a pointwise measure of uncertainty in the final, deconvolved signal. We demonstrate the results on real data used to calibrate a high-energy X-ray source and show that this approach gives reconstructions as good as classical regularization methods, while mitigating many of their drawbacks.

Deconvolution, Inverse Problems, Markov Chain Mont↗

Modeling spatial effects of PM{sub 2.5} on term low birth weight in Los Angeles County

Air pollution epidemiological studies suggest that elevated exposure to fine particulate matter (PM{sub 2.5}) is associated with higher prevalence of term low birth weight (TLBW). Previous studies have generally assumed the exposure–response of PM{sub 2.5} on TLBW to be the same throughout a large geographical area. Health effects related to PM{sub 2.5} exposures, however, may not be uniformly distributed spatially, creating a need for studies that explicitly investigate the spatial distribution of the exposure–response relationship between individual-level exposure to PM{sub 2.5} and TLBW. Here, we examine the overall and spatially varying exposure–response relationship between PM{sub 2.5} and TLBW throughout urban Los Angeles (LA) County, California. We estimated PM{sub 2.5} from a combination of land use regression (LUR), aerosol optical depth from remote sensing, and atmospheric modeling techniques. Exposures were assigned to LA County individual pregnancies identified from electronic birth certificates between the years 1995-2006 (N=1,359,284) provided by the California Department of Public Health. We used a single pollutant multivariate logistic regression model, with multilevel spatially structured and unstructured random effects set in a Bayesian framework to estimate global and spatially varying pollutant effects on TLBW at the census tract level. Overall, increased PM{sub 2.5} level was associated with higher prevalence of TLBW county-wide. The spatial random effects model, however, demonstrated that the exposure–response for PM{sub 2.5} and TLBW was not uniform across urban LA County. Rather, the magnitude and certainty of the exposure–response estimates for PM{sub 2.5} on log odds of TLBW were greatest in the urban core of Central and Southern LA County census tracts. These results suggest that the effects may be spatially patterned, and that simply estimating global pollutant effects obscures disparities suggested by spatial patterns of effects. Studies that incorporate spatial multilevel modeling with random coefficients allow us to identify areas where air pollutant effects on adverse birth outcomes may be most severe and policies to further reduce air pollution might be most effective. - Highlights: • We model the spatial dependency of PM{sub 2.5} effects on term low birth weight (TLBW). • PM{sub 2.5} effects on TLBW are shown to vary spatially across urban LA County. • Modeling spatial dependency of PM{sub 2.5} health effects may identify effect 'hotspots'. • Birth outcomes studies should consider the spatial dependency of PM{sub 2.5} effects.

54 ENVIRONMENTAL SCIENCES↗

Bayesian classification of falls risk

Background. Prior research in falls risk prediction often relies on qualitative and/or clinical methods. There are two challenges with these methods. First, qualitative methods typically use falls history to determine falls risk. Second, clinical methods do not quantify the uncertainty in the classification decision. In this paper, we propose using Bayesian classification to predict falls risk using vectors of gait variables shown to contribute to falls risk. Research Questions: (1) Using a vector of risk ratios for specific gait variables shown to contribute to falls risk, how can older adults be classified as low or high falls risk? and (2) how can the uncertainty in the classifier decision be quantified when using a vector of gait variables? Methods. Using a pressure sensitive walkway, biomechanical measurements of gait were collected from 854 adults over the age of 65. In our method, we first determine low and high falls risk labels for vectors of risk ratios using the k-means algorithm. Next, the posterior probability of low or high falls risk class membership is obtained from a two component Gaussian mixture model (GMM) of gait vectors, which enables risk assessment directly from the underlying biomechanics. We classify the gait vectors using a threshold based on Youden's J statistic. Results. Through a Monte Carlo simulation and an analysis of the receiver operating characteristic (ROC), we demonstrate that our Bayesian classifier, when compared to the k-means falls risk labels, achieves an accuracy greater than 96% at predicting low or high falls risk. Significance. Our analysis indicates that our approach based on a Bayesian framework and an individual's underlying biomechanics can predict falls risk while quantifying uncertainty in the classification decision.

59 BASIC BIOLOGICAL SCIENCES↗

Inferring fracture dilation and shear slip from surface deformation utilising trained surrogate models

An important task in energy and CO 2 storage (sequestration) in the subsurface is to verify that the surrounding fractures and faults are not activated, acting as leakage pathways. This is achievable through effective and efficient Measurement, Monitoring and Verification (MMV) plans. In this work, two surrogate models are trained to captures dilation (opening) and shear deformation of fractures, and the associated surface deformation. The trained surrogate model, based on conditional Generative-Adversarial Networks (cGAN) receives fracture apertures from dilational fractures together with fracture slips from shear fractures and predicts the combined surface deformation. An inversion algorithm based on Bayesian framework is proposed to identify the geometry of both types of fractures, as well as volume of dilational fractures and deformation moment induced by shear fractures, all from the measured surface deformation data. The inversion algorithm utilises the Differential Evolution (DE) optimisation technique that has the superior performance in finding the global minimum of cost function. The proposed surrogate-assisted inversion successfully inferred the unknown dip, dip direction and the volume of the dilational fractures as well as the induced deformation moment in shear fractures. The model was further tested for the inversion of a field hydraulic fracturing tilt dataset applying different scenarios with varying unknowns to show the model's performance, as well as incorporating shear deformation for better match with the observed data.

Dilation and shear↗

On the Bayesian calibration of computer model mixtures through experimental data, and the design of predictive models

For many real systems, several computer models may exist with different physics and predictive abilities. To achieve more accurate simulations/predictions, it is desirable for these models to be properly combined and calibrated. Here, we propose the Bayesian calibration of computer model mixture method which relies on the idea of representing the real system output as a mixture of the available computer model outputs with unknown input dependent weight functions. The method builds a fully Bayesian predictive model as an emulator for the real system output by combining, weighting, and calibrating the available models in the Bayesian framework. Moreover, it fits a mixture of calibrated computer models that can be used by the domain scientist as a mean to combine the available computer models, in a flexible and principled manner, and perform reliable simulations. It can address realistic cases where one model may be more accurate than the others at different input values because the mixture weights, indicating the contribution of each model, are functions of the input. Inference on the calibration parameters can consider multiple computer models associated with different physics. The method does not require knowledge of the fidelity order of the models. We provide a technique able to mitigate the computational overhead due to the consideration of multiple computer models that is suitable to the mixture model framework. We implement the proposed method in a real-world application involving the Weather Research and Forecasting large-scale climate model.

97 MATHEMATICS AND COMPUTING↗

Learning functional priors and posteriors from data and physics

In this work, we develop a new Bayesian framework based on deep neural networks to be able to extrapolate in space-time using historical data and to quantify uncertainties arising from both noisy and gappy data in physical problems. Specifically, the proposed approach has two stages: (1) prior learning and (2) posterior estimation. At the first stage, we employ the physics-informed Generative Adversarial Networks (PI-GAN) to learn a functional prior either from a prescribed function distribution, e.g., Gaussian process, or from historical data and physics. At the second stage, we employ the Hamiltonian Monte Carlo (HMC) method to estimate the posterior in the latent space of PI-GANs. In addition, we use two different approaches to encode the physics: (1) automatic differentiation, used in the physicsinformed neural networks (PINNs) for scenarios with explicitly known partial differential equations (PDEs), and (2) operator regression using the deep operator network (DeepONet) for PDE-agnostic scenarios. We then test the proposed method for (1) meta-learning for one-dimensional regression, and forward/inverse PDE problems (combined with PINNs); (2) PDE-agnostic physical problems (combined with DeepONet), e.g., fractional diffusion as well as saturated stochastic (100-dimensional) flows in heterogeneous porous media; and (3) spatial-temporal regression problems, i.e., inference of a marine riser displacement field using experimental data from the Norwegian Deepwater Programme (NDP). The results demonstrate that the proposed approach can provide accurate predictions as well as uncertainty quantification given very limited scattered and noisy data, since historical data could be available to provide informative priors. In summary, the proposed method is capable of learning flexible functional priors, e.g., both Gaussian and non-Gaussian process, and can be readily extended to big data problems by enabling mini-batch training using stochastic HMC or normalizing flows since the latent space is generally characterized as low dimensional.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Process–structure–property relationships in bimodal machined microstructures using robust structure descriptors

Machining is a severe plastic deformation process that subjects materials to high rates of deformation and elevated temperatures. Dynamic recrystallization during severe plastic deformation drives grain refinement into the sub-micron range but the ductility and thermal stability of these structures is poor. In contrast, bimodal microstructures consisting of both fine and coarse grains have been shown to exhibit attractive strength and ductility properties at these temperatures. In this paper, we study the process–structure–property relationships for pure copper subject to a machining process where the cutting speeds are varied. Further, we investigate the role of thermal effects by varying the post-deformation cooling rates. Microstructures generated under these deformation conditions are quantified using angularly resolved chord length statistics. The derived metrics are found to be robust descriptors of the studied microstructures as they automatically capture complex features such as unimodal and bimodal distributions of grain structure, grain constituent length scales, and morphological anisotropy induced by shear deformation. The uniaxial equivalent yield strength of the generated structures are estimated using spherical nanoindentation and inverse modeling techniques. Lastly, we present a methodology for identifying the constrained property-process inverse mapping for machining using a Bayesian framework and the established forward process–structure–property mapping.

36 MATERIALS SCIENCE↗