Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Strategies to achieve high productivity, high conversion, and high yield in yeast fermentation of algal biomass hydrolysate

The conversion of carbohydrates in biomass via fermentation is an important component of an overall strategy to decarbonize the production of fuels and chemicals. Owing to the cost and resources required to produce biomass hydrolysates, the economic and environmental sustainability of these fermentation processes requires that they operate with high yields, sugar conversion, and productivity. Immobilized-cell technology in a continuous bioprocess can achieve significantly higher volumetric productivities than is possible from standard batch fermentation using free cells. Here, we demonstrate approaches for improvement of ethanol yield from algal hydrolysates and a mock hydrolysate medium. Saccharomyces cerevisiae was immobilized in alginate and incorporated into a two-column immobilized cell reactor system. Furthermore, the yeast quorum-sensing molecule, 2-phenylethanol, was added to improve ethanol yield by restricting growth and diverting sugar to ethanol. The bioreactor system could achieve high ethanol volumetric productivity (>20 g/ Lreactor ·h) and high glucose conversion (>99%) in mock hydrolysate, while the addition of 0.2% 2-phenylethanol resulted in 4.9% higher ethanol yield. With an algal hydrolysate of <10 g/L sugar, the ethanol volumetric productivity reached 9.8 g/ Lreactor ·h, and the addition of 0.2% 2-phenylethanol increased the ethanol yield by up to 7.4%. These results demonstrate the feasibility of novel strategies to achieve sustainability goals in biomass conversions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Biochemical Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels and Products: 2019 State of Technology and Future Research

The purpose of this report is to benchmark the latest experimental developments across a number of potential bioconversion pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this state of technology, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL’s recently-published 2018 biochemical design report focused on those two pathways. The models were run across three scenarios for lignin utilization, namely combustion, conversion to coproducts based on “base case” performance with biomass hydrolysate, and conversion to coproducts based on “high” performance demonstrated with model lignin monomer components.

09 BIOMASS FUELS↗
DOE OSTI2022

Characterization of the Biomass Degrading Enzyme GuxA from Acidothermus cellulolyticus

Microbial conversion of biomass relies on a complex combination of enzyme systems promoting synergy to overcome biomass recalcitrance. Some thermophilic bacteria have been shown to exhibit particularly high levels of cellulolytic activity, making them of particular interest for biomass conversion. These bacteria use varying combinations of CAZymes that vary in complexity from a single catalytic domain to large multi-modular and multi-functional architectures to deconstruct biomass. Since the discovery of CelA from Caldicellulosiruptor bescii which was identified as one of the most active cellulase so far identified, the search for efficient multi-modular and multi-functional CAZymes has intensified. One of these candidates, GuxA (previously Acel_0615), was recently shown to exhibit synergy with other CAZymes in C. bescii, leading to a dramatic increase in growth on biomass when expressed in this host. GuxA is a multi-modular and multi-functional enzyme from Acidothermus cellulolyticus whose catalytic domains include a xylanase/endoglucanase GH12 and an exoglucanase GH6, representing a unique combination of these two glycoside hydrolase families in a single CAZyme. These attributes make GuxA of particular interest as a potential candidate for thermophilic industrial enzyme preparations. Here, we present a more complete characterization of GuxA to understand the mechanism of its activity and substrate specificity. In addition, we demonstrate that GuxA exhibits high levels of synergism with E1, a companion endoglucanase from A. cellulolyticus. We also present a crystal structure of one of the GuxA domains and dissect the structural features that might contribute to its thermotolerance.

09 BIOMASS FUELS↗
DOE OSTI2025

Maximizing long-term biohydrogen production with Clostridium thermocellum for high solids conversion of lignocellulosic biomass

Biological hydrogen production from lignocellulosic biomass sustainably couples organic waste reduction with renewable energy generation. Efficient conversion is challenged by the structural complexity of lignocellulose and resulting recalcitrance to enzymatic degradation. Clostridium thermocellum natively breaks down biomass with highly effective hemi-/cellulases systems (i.e., cellulosomes) and generates hydrogen in anaerobic cultivation, creating a compelling platform for lignocellulosic biohydrogen production. Achieving commercially viable production rates requires balancing high biomass loading and throughput against uniform mixing conditions required for enzyme dispersion, pH and temperature control, and efficient hydrogen and metabolite removal in continuous operation. To address these barriers to process intensification, we implemented novel reactor and process designs for high-solids lignocellulosic biomass fermentations using the C. thermocellum KJC19-9 strain, genetically engineered for co-utilization of cellulose and hemicellulose sugars (i.e., xylose). Via computational fluid dynamics (CFD) modeling and experimental validation, we achieved a >50% improvement in biohydrogen production with an improved anchor-type impeller morphology, coupled to a threefold reduction in agitation rate. To further reduce rheological constraints and accumulation of toxic metabolites, we then transitioned the process to sequencing fed-batch operation. The resulting process generated 24.87 L H 2 L −1 from 160 g L −1 of deacetylated and mechanically refined (DMR)-pretreated corn stover biomass over 16 days while solubilizing >95% of influent cellulose and hemicellulose, setting a new performance benchmark for continuous production of biohydrogen from lignocellulose.

08 HYDROGEN↗
NASA NTRS1978

Impact of novel energy sources: OTEC, wind, goethermal, biomass

Alternate energy conversion methods such as ocean thermal energy conversion (OTEC), wind power, geothermal wells and biomass conversion are being explored, and re-examined in some cases, for commercial viability. At a time when United States fossil fuel and uranium resources are found to be insufficient to supply national needs into the twenty-first century, it is essential to broaden the base of feasible energy conversion technologies. The motivations for development of these four alternative energy forms are established. Primary technical aspects of OTEC, wind, geothermal and biomass energy conversion systems are described along with a discussion of relative advantages and disadvantages of the concepts. Finally, the sentiment is voiced that each of the four systems should be developed to the prototype stage and employed in the region of the country and in the sector of economy which is complimentary to the form of system output.

Roberts, A. S., Jr.↗
DOE OSTI2023

Biochemical Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels and Products: 2022 State of Technology and Future Research

The annual State of Technology (SOT) assessment is a key activity for biochemical platform research. It allows the impact of research progress (both directly achieved in-house at the National Renewable Energy Laboratory [NREL] and indirectly extrapolated from available public data) to be quantified in terms of economic improvements in the overall cellulosic biofuel production process for a particular conversion pathway. As such, initial benchmarks can be established for currently demonstrated performance and progress can be tracked toward out-year goals to ultimately demonstrate cost-competitive biofuel technology. Building upon efforts to progress NREL's biochemical platform R&D work toward ultimate 2030 goals to demonstrate less than $2.50/gallon gasoline equivalent (GGE) fuel selling prices, experimental and techno-economic analysis (TEA) activities have primarily focused on "advanced" biochemical processing strategies to fuels and coproducts, guided by TEA modeling to highlight key barriers and priorities toward achieving this goal across a number of potential bioconversion pathways. The purpose of the present effort is to benchmark the latest experimental developments for these pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this SOT, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL's recently published 2018 biochemical design report focused on those two pathways. The models were run across two scenarios for lignin utilization, namely combustion and conversion to value-added coproducts.

09 BIOMASS FUELS↗
DOE OSTI2025

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Net Greenhouse Gas and Air Pollutant Trade-offs

This study examines greenhouse gas (GHG) and criteria air pollutant (CAP) emissions trade-offs for renewable diesel across 12 scenarios, involving different biochemical conversion designs, biorefinery scales, and feedstocks. A conventional design uses lignin for on-site heat and power, which exports excess power to the grid. An alternative design exports lignin pellets, offsetting other pellet production methods but requiring grid electricity to meet biorefinery power demands. Net emissions were quantified in Iowa and Georgia, selected considering feedstock availability, coproduct displacement, and regional power grids, assuming grid-exported power avoids coal or low-carbon electricity. Results for the conventional design remained consistent across the electricity displacement scenarios. When comparing lignin utilization strategies, pelletizing lignin reduces sulfur dioxide, carbon monoxide, nitrogen oxides, and volatile organic compounds (net emissions –0.66 mg MJ –1 , 25 mg MJ –1 , 25 mg MJ –1 , 7.8 mg MJ –1 , respectively). However, lignin pelletization increases net particulate matter (fine and coarse) and ammonia (net emissions of 4.7 mg MJ –1 , 13 mg MJ –1 , and 0.26 mg MJ –1 , respectively), alongside indirect GHG emissions due to grid electricity dependence. Additionally, processing 2000 tonnes corn stover daily minimizes emissions for both designs. Only lignin pelletization with renewable electricity and additional particulate matter and ammonia controls reduces all CAP and GHG emissions simultaneously.

09 BIOMASS FUELS↗
DOE OSTI2024

Integration of IH 2 ® with Cool Reformer for the Conversion of Cellulosic Biomass to Drop In Fuels

GTI Energy has integrated the Cool Reformer technology with the IH 2® -50 pilot plant (which can process a maximum of 50kg/day of biomass feed) to demonstrate the suitability of this new reforming technology for producing hydrogen within IH 2 ® process. As part of this study, we showed that all of the hydrogen required for the IH 2® process could be produced from steam reforming the IH 2® light gas generated within the process and the system can be integrated in a cost-effective way compared to the use of standard SMRs.

08 HYDROGEN↗
DOE OSTI2026

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Biorefinery Marginal Air Quality Impacts and Comparison to Feedstock Production

This study assesses the air quality impacts of an advanced biorefinery that produces renewable diesel blendstock (RDB) from lignocellulosic biomass via aerobic respiration (Davis et al. 2022) by estimating fine particulate matter (PM2.5) impacts from biorefinery emissions. It continues a prior analysis that used a geospatial assessment to identify source regions for biomass feedstocks and studied the impact of feedstock production emissions on air quality (Thind et al. 2022). Thind et al. (2022) identified RDB biorefineries that can use corn stover feedstocks of 2,000; 5,200; and 9,100 dry metric tons per day (DMT/day), based in Iowa, and suggested 7 unique counties can serve as hosts for a biorefinery that draws biomass feedstock from neighboring counties. Given 13 unique county-biorefinery size combinations and two waste lignin end uses at the biorefinery (lignin as a fuel for electricity generation and lignin for pellet production), the air-quality-related sustainability aspects of each of these 26 scenarios are assessed by estimating the annual average impacts of biorefinery emissions on the dispersion and formation of secondary PM2.5 in the atmosphere using a novel reduced-complexity air quality model called the Intervention Model for Air Pollution (InMAP). The 26 biorefinery design combinations help capture how a biorefinery's emissions of air pollutants and their resulting impact on local and regional air quality are influenced by the magnitude of production scale, lignin utilization strategy, and location of a proposed biorefinery. Methods developed in Thind et al. (2022) are applied to estimate the constraints on primary PM2.5 and secondary PM2.5 precursor emissions based on compliance with U.S. Environmental Protection Agency's (EPA's) annual primary National Ambient Air Quality Standard (NAAQS) of PM2.5 (i.e.12.0 micrograms per cubic meter (microgram/m3)) at downwind receptors of a biorefinery. Incremental PM2.5 concentrations caused by the emission of biorefining corn stover into RDB are assessed and compared to those of corn stover production. To illuminate which upstream supply chain stage of renewable diesel production contributes most to air quality impacts, marginal PM2.5 concentrations are compared between both stages at multiple downwind air quality monitor locations. In addition, through a hotspot analysis, we identify the primary contributing factors of emissions within the feedstock production and biorefinery stage operations. In doing so, we provide insights for improving the air pollutant emission-related sustainability of advanced lignocellulosic biofuel production.

09 BIOMASS FUELS↗
DOE OSTI2023

Direct Conversion of Delignified Biomass into Non-Volatile Products Using Thermophilic Bacteria

Butyric acid (BA) can be used as a platform intermediate for diesel and sustainable aviation fuels (SAFs) as well as a precursor for diverse commodity chemicals for the production of polymers, fibers, solvents, and preservatives. This work presents a co-culture-based bioprocess for the production of BA from corn stover by two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. First, we tested the capability of C. thermocellum to deconstruct three different biomass streams from the NREL pilot plant pretreatment process -raw, deacetylated, and deacetylated and mechanically refined corn stover (DMR)-, and up to 82% solids deconstruction and 91% carbohydrate utilization were obtained when using DMR solids. Then, the sugar utilization and by-product formation capabilities on various substrates by C. thermobutyricum were compared to evaluate its potential as a co-culture partner for C. thermocellum. Model carbon sources -glucose and xylose- were compared to a mixture of substrates present in soluble DMR hydrolysate streams, and the highest cell density as well as the maximum BA titer (8.3 g/L) were observed on DMR hydrolysate. Finally, clostridial co-cultivations on DMR solids were performed to investigate the inoculation time for both organisms that enhances BA production; while C. thermocellum was always inoculated at the beginning of the cultivation, C. thermobutyricum was inoculated at 0, 36, or 72h. It was found that BA production begins immediately upon inoculation of C. thermobutyricum regardless of the inoculation time. However, higher solids deconstruction and carbohydrate utilization results (83.7 and 95.6%, respectively) were obtained when both organisms were inoculated at the beginning of the fermentation. Under those conditions, up to 2.6 g/L of BA were obtained from DMR solids after 120h of cultivation. This work provides relevant information for the sustainable production of BA using thermophilic bacteria.

bacterial co-culture↗
DOE OSTI2023

Simulations of biomass compression-screw feeding using a compressible non-Newtonian constitutive model

There is global interest in the conversion of biomass into sustainable low-carbon-footprint fuels and chemicals as an alternative to non-renewable fossil feedstocks. Feeding biomass solids into pressurized reactors is one of the key steps in biomass conversion. Predicting mechanical failure and energy requirements for this step helps avoid upstream processing bottlenecks and enables efficient operation of a biorefinery. Here, in this work, we developed a predictive computational model for biomass screw feeders that capture the highly viscous, non-Newtonian and compressible behavior of biomass slurries. Biomass compressible behavior is formulated by an equation of state and the non-Newtonian rheology is represented by a density-dependent viscosity model. Experimental data from two compression screw-feeder systems are presented as a validation for our model. Our model successfully predicted the location of the compressed biomass “plug”, biomass flow rate, and the required torque at different operating conditions for the experimental conditions studied in this work.

09 BIOMASS FUELS↗
DOE OSTI2023

Bioleaching to produce clean loblolly pine for thermochemical conversion

Lignocellulosic biomass contains inorganic elements that could induce slagging, ash fouling, and emission of both corrosive and harmful gases during thermochemical conversion. Water leaching pretreatment can remove most of the water-soluble elements, while it has limited industrial applicability due to its ineffectiveness in removing water-insoluble elements. Bioleaching is an alternative pretreatment method which has not been fully studied. In this work, bioleaching by Aspergillus niger strains NRRL 2001, NRRL 3122, and NRRL 567 was conducted to pretreat loblolly pine biomass with added water. Further, the removal of inorganic elements (K, Ca, Mg, and S) by bioleaching with A. niger NRRL 2001 was compared with chemical leaching with citric acid, HCl, and NaOH. It was shown that the pH reduction during bioleaching greatly improved K and Mg leaching to the point comparable to acid leaching, whereas Ca was precipitated by oxalic acid produced by the fungus. Bioleaching was also conducted in manually separated needles and chips components of loblolly pine. Glucose was added at different levels to assist bioleaching. At higher glucose levels, gluconic acid and citric acid were produced during bioleaching, leading to the increase of K, Ca, and Mg removal rates by more than 35%, 180%, and 390%, respectively, from the feedstock as compared with water leaching. Overall, bioleaching greatly improved removal of K, Ca, Mg, but not S from loblolly pine feedstocks as compared with water leaching.

09 BIOMASS FUELS↗
DOE OSTI2020

Mechanistic Insights into the Conversion of Biorenewable Levoglucosanol to Dideoxysugars

Here, a molecular understanding of the conversion of biorenewable threo- and erythro-levoglucosanol (LGOL) to 3,4-dideoxysugars in aqueous medium is provided based on first-principles simulations. The synthetic importance of this transformation is that these intermediates can be quantitatively hydrogenated to (S,S)/(S,R) hexane-1,2,5,6-tetrol (tetrol), whose stereochemistry depends on which dideoxy sugar intermediates are formed during LGOL conversion. The thermodynamic and kinetic feasibility of the acetal (R 2 C(OR) 2 ) hydrolysis in LGOL is investigated via computing the free energy profile. In aqueous medium, the rate-determining step of LGOL hydrolysis is the protonation of the anhydro-bridge oxygen atom of LGOL concurrent with ring opening, yielding the cyclic forms of 3,4-dideoxymannose (DDM) and 3,4-dideoxyglucose (DDG) from threo- and erythro-LGOL, respectively. The measured activation energies of LGOL hydrolysis are 20.5 and 23.6 kcal/mol for DDM and DDG formation, respectively. These values are in agreement with the computed protonation free energies of 17.1 and 18.2 kcal/mol, respectively. Based on the simulations, a Bronsted base-catalyzed isomerization from DDG or DDM to 3,4-dideoxy fructose (DDF) is preferred with lower apparent activation free energy barriers compared to the acid-catalyzed isomerization. In summary, this study provides mechanistic information about the conversion of the biomass-derived anhydro-sugar LGOL to 3,4-dideoxy sugars, which are precursors to renewable high-value chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

System-Level Optimization to Improve Biofuel Potential via Genetic Engineering and Hydrothermal Liquefaction

The economic success of biofuels and bioproducts depends on system-level optimization including biomass production and conversion. Hydrothermal liquefaction (HTL) can convert wet biomass such as microalgae into a biofuel intermediate (BFI) under elevated temperatures and pressure. An understanding of the impacts of biomass composition on BFI yield and quality can inform genetic engineering strategies in the improvement of biochemical composition for biofuel production. In this work, wild type cyanobacterium Synechocystis sp. PCC 6803 biomass was doped with various common cellular storage compounds in lab-scale HTL experiments. Doping with glycogen or polyhydroxybutyrate (PHB) significantly reduced BFI yields, while doping with triglycerides (TAG) or medium chain-length polyhydroxyalkanoate (mcl-PHA) increased BFI yield and quality. In light of these observations, a genetically engineered Synechocystis strain deficient in glycogen biosynthesis was cultivated to produce biomass for HTL, leading to a 17% increase in BFI yield. In addition, we built a multiphase component additivity (MCA) model that can predict BFI yield and quality with PHAs in the biomass. This work demonstrates an effective strategy to integrate strain development with downstream biomass conversion to maximize biofuel yield, with lessons applicable to microalgae as well as other biomass.

09 BIOMASS FUELS↗
DOE OSTI2020

NREL's Capabilities in Algae-Based Chemicals, Polymers, and Fuels

NREL is advancing research and development (R&D) to maximize photosynthetic carbon capture into biomass for conversion to a broad portfolio of valuable products. Areas of focus include: (1) Carbon capture improvement through photosynthesis engineering; (2) Biotechnology and genetic toolbox development for broad species portfolio; (3) Conversion and fractionation of algal biomass to create high-value products and fuels; (4) Biological seaweed conversion to volatile fatty acids as fuel and product feedstocks; (5) Novel polyurethane production synthesis from fully renewable algae-based feedstocks; (6) Advanced analytical characterization of biomass feedstocks; and (7) Process techno-economic and life cycle modeling.

algae↗
DOE OSTI2020

Effects of the advanced organosolv pretreatment strategies on structural properties of woody biomass

Plants have evolved their lignocellulosic cell walls through complex structural and chemical mechanisms to protect itself against microbial attacks, which makes native lignocellulosic biomass recalcitrant to enzymatic deconstruction. Pretreatment is a crucial step in the biological conversion of biomass as it can render structural changes in the plant cell wall to reduce the biomass recalcitrance, thus enhancing its sugar release performance. There have been many efforts to develop effective pretreatment technologies to overcome the biomass recalcitrance with a primary focus on the efficient conversion of biomass carbohydrates to liquid fuels, while lignin is significantly underutilized despite its bulk amount and high-value opportunities. In this study, the effects of two recent organosolv pretreatment strategies, co-solvent enhanced lignocellulosic fractionation (CELF) and γ-Valerolactone (GVL) pretreatments, on physicochemical properties of poplar were investigated and compared with the effects of conventional ethanol organosolv pretreatment. Diverse physicochemical properties of biomass including chemical compositions, molecular weights of cellulose and lignin, aromatics and inter-unit linkages of lignin, lignin hydroxyl group contents, cellulose crystallinity, and accessible surface area of cellulose were analyzed before and after pretreatments. The results revealed how each organic solvent pretreatment system affected biomass structural characteristics and recalcitrance.

Meng, Xianzhi↗