SEARCH · Search NASA

Results for “Composite media”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Composite coatings from polycarbosilane derived SiC and Al/SiC cermet active fillers as protective barriers against steel corrosion

Stainless steel is used throughout the world as a structural material. However, it undergoes corrosion damage when exposed to extremely corrosive media, such as the marine environment. An alternative to solve this problem lies in the development of coatings that can withstand extreme conditions but also be easily deposited with inherently corrosion-resistant materials such as silicon carbide (SiC). The present study shows a simple method to produce Al/SiC cermet powders by attrition milling. The resulting cermet powders with a metallic matrix and hemispherical morphology, were employed as fillers in polycarbosilane (PCS) solutions that were sprayed on A304 stainless steel substrates. Al/SiC composite coatings were produced after heating the sprayed suspensions at 700 °C for 1 h in Ar atmosphere. The resulting composite coatings exhibited low surface energies (< 35 mN/m), water contact angles of 53°, and adhesion strength of up to 30 MPa. Finally, corrosion tests were performed in a cyclic corrosion test chamber, showing that these coatings effectively reduced the corrosion rate of stainless steel by 87%, reaching corrosion rate values of 0.007 g/cm 2 year.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Laser scattering by submicron droplets formed during the electrical explosion of thin metal wires

Abstract This paper presents the results of studying dispersed media formation during the electrical explosion of thin metal wires in vacuum by using low-current generators (~1–10 kA). Particular attention is paid to the analysis of the composition and structure of the corresponding explosion products as well as to the problem of their visualization using simultaneous laser interferometry and shadow imaging at two wavelengths (1.064 µ m and 0.532 µ m). Our findings indicate the important role in the visualization of the explosion products that belongs to multiple scattering by submicron droplets of dense condensed matter, which are mixed with metal vapor. The hypothesis on the existence of submicron droplets in the products of exploding metal wires correlates with the results obtained by soft x-ray radiography combined with a laser probing technique. Taking into account the multiple scattering by submicron droplets, it is possible to significantly clarify the parameters of the explosion products visualized via laser probing techniques as well as to gain a deeper insight into the physics behind the electrical wire explosion.

Physics↗

DOE OSTI2025

Development of Polycrystalline Photoelectrodes with Optimum Compositions and Morphologies for Solar Fuel Production via Electrochemical Synthesis (Final Technical Report)

Photoelectrochemical cells (PECs) can utilize solar energy for water splitting to produce H 2 as a clean fuel. The most critical components of a water-splitting PEC are semiconductor electrodes (photoelectrodes) that absorb solar energy to generate photoexcited charge carriers and transport them to the electrode/electrolyte interface for water reduction and oxidation reactions. While efficient PEC hydrogen production has been successfully demonstrated on the laboratory scale, the commercial viability of PECs depends critically on the cost of H 2 produced by the PECs, which is affected by the cost of PEC construction. Therefore, identifying promising inexpensive semiconductor electrodes is important. The goal of this project was to bring an advancement in the synthesis and understanding of inexpensive polycrystalline photoelectrodes based on oxides. Oxide-based semiconductors are inexpensive, easy to fabricate, and relatively more stable in aqueous media compared to other types of semiconductors. This project developed new electrodeposition methods to produce a variety of oxide-based semiconductor electrodes with precisely controlled compositions and morphologies to enhance photon absorption, electron-hole separation, and the use of electrons and holes for desired chemical reactions. The resulting high-quality photoelectrodes were investigated to establish the structure-composition-morphology-photoelectrochemical property relationships to identify the advantages and limitations of each oxide semiconductor system.

14 SOLAR ENERGY↗

NASA NTRS1993

Intact capture of hypervelocity particles on Shuttle

The capability for capturing micrometeoroid analogs intact through laboratory simulations in passive underdense media offers a valuable tool for cosmic dust research. However, no amount of laboratory simulations can replace actual space experiments due to the technical inability to launch high fidelity analogs of micrometeoroids in ground laboratories and then reliably simulating high hypervelocities (greater than 7 km/s). Fluffy composite micrometeoroid analogs tend to break up and have not survived laboratory launches at beyond 4 km/s, however, a new technique of launching cluster analogs was developed for the two-stage light-gas gun at NASA Ames Vertical Gun Range. Plasma drag or electrostatic accelerators may be able to achieve higher speeds than two-stage light-gas guns but only with very limited projectile compositions and may result in severe projectile deformation. Consequently, a space demonstration of intact capture was sought since 1983. Initial results from our STS-47 flight, which carried the first Shuttle Sample Return Experiment (SRE) with silica aerogel capture media, are reported.

Tsou, P.↗

DOE OSTI2026

Novel PtNi single-atom–nanocluster (SA–NC) ensembles promote Tafel kinetics and ampere-class AEM hydrogen evolution

The development of efficient, durable, and low-PGM electrocatalysts for the hydrogen evolution reaction (HER) in alkaline media is critical for next-generation electrolysis technologies. We report a facile two-step synthesis of highly dispersed PtNi and PtNi-nitride nanoclusters (NCs) (~2.3 nm) with ultralow Pt content (0.5 at.%) anchored on N-doped Vulcan carbon. Structural and compositional characterization via XAS, XPS, HAADF-STEM, HRTEM, and EDS mapping established key structure–activity relationships across varying Pt/Ni ratios and pyrolysis temperatures. The Pt0.5Ni0.5/C-750 catalyst, an ensemble of PtNi M-N-C type single-atom (SA) moieties with neighboring PtNi nanoclusters (NC), exhibited superior HER performance in alkaline media, achieving overpotentials of 30, 115, and 210 mV at 10, 100, and 500 mA cm−2, respectively. Despite at a lower Pt content, this novel SA–NC ensemble outperformed commercial Pt/C by ~36%. A standardized literature comparison with contemporary Pt- and Ru-doped analogues reveals the as-prepared Pt0.5Ni0.5/C-750 to sit at the apex of Tafel-limited kinetics and low overpotential at 100 mA cm−2. Tafel-limited Tafel slopes in both alkaline and acidic regimes confirm favorable proton recombination kinetics. Mass activities at 200 mV reached 13.8 and 18.84 A mgPt−1 in alkaline and acidic media, respectively. However, excessive nitridation (e.g., at 650 °C) adversely altered Pt electronic structure and HER kinetics. While Ni enhanced alkaline HER, acidic HER favored Ni-free analogues. Pt0.5Ni0.5/C-750 also demonstrated robust temperature responsiveness and 300-h operational stability at high current densities (0.5–1.0 A cm−2) in MEA tests. This work presents a scalable strategy for designing thermally responsive, durable, and compositionally tunable NC catalysts with neighboring SA moieties for alkaline electrolysis.

AEMWE↗

DOE OSTI2024

Impact of reactor architecture and design parameters on the performance of microbial electrolysis cells revealed by the electrode potential slope analysis

Microbial electrolysis cells (MECs) are appealing for recovering the chemical energy contained in domestic and industrial liquid wastes as hydrogen gas. Despite several years of research in the field, there is still a lack of critical analysis of how the reactor architecture dictates the electrochemical performance of the cell. In this study, internal resistance and onset voltage from the electrode potential slope analysis (EPS) were used in combination with current density, hydrogen production rate, reactor packing density, electrode spacing, membrane type and composition from 23 different studies to identify the reactor design parameters that primarily govern electrochemical performance of MECs. Using anion exchange membranes resulted in smaller internal resistances (AEM R int = 41± 40 mΩ m 2 ) and larger current density (18 ± 14 A m −2 ) compared to single chamber reactors (SC R int = 68 ± 58 mΩ m 2 ; 22 ± 16 A m −2 ) or MECs with cation exchange membranes (CEM R int = 376 ± 280 mΩ m 2 ; 3.0 ± 2.1 A m −2 ). Higher electrochemical performance for AEM- and SC-MECs translated in larger hydrogen gas production rates (0.122 mL H 2 C −1 for AEM vs 0.117 mL H 2 C −1 for SC), but only when inhibitors against hydrogen scavengers were added in single chamber systems (0.080 mL H 2 C −1 for SC without inhibitors). Following membrane type and composition, maintaining a small electrode spacing was the most critical parameter to improve MEC performance, indicating that the low conductivity of the media primarily limit performance by increasing ohmic resistance. Here, reactor volume and electrode surface area negatively correlated with internal resistance and current density, indicating that better performance of scaled-up reactors can likely be obtained by stacking multiple smaller units rather than just increasing reactor size. Although challenges remain in the implementation of MECs for hydrogen production from liquid wastes, advances in electrochemical engineering of the reactors can facilitate scale up and performance prediction at scale.

Electrochemistry↗

DOE OSTI2021

Effects of Al:Si and (Al+Na):Si ratios on the static corrosion of sodium‐boroaluminosilicate glasses

Abstract Understanding alteration mechanisms of borosilicate glasses in aqueous media is essential to nuclear waste performance assessments to ensure radioisotopes are contained for extended durations. Aluminum is typically added to glass compositions to reduce the extent of alteration. However, previous work on 7‐day durability tests has suggested that Al has a nonlinear relationship with extent of alteration. The effects of Al:Si and (Al+Na):Si substitutions on glass durability were evaluated using series of glasses based on the International Simple Glass corroded in static conditions up to 13 months in deionized water at 90°C. The alteration behavior was determined by measurement of element release in solution. The ⁓7‐day alteration trends across the series were consistent with predicted trends. The 13‐month results indicated overall alteration decreased as Al:Si ratios increased and was unaffected by changes in (Al+Na):Si except for the glass with the highest (Al+Na):Si ratio (ISG‐A23N), which completely altered within 14 days. Frequent sampling and in situ Raman measurements of solutions revealed ISG‐A23N experienced several distinguishable alteration rate regimes within 7 days, forming a ⁓100 µm alteration layer and a NaSiAlO 4 zeolite.

Reiser, Joelle T.↗

DOE OSTI2023

Metal-ceramic composite powders

A process for manufacturing metal-ceramic composite material powder comprising ball milling metal powder and ceramic nanoparticles to yield a metal-ceramic composite powder comprising ceramic nanoparticles embedded in a metal matrix powder particles; wherein the ball milling is performed using a ceramic milling media and a milling vessel having a ceramic interior surface. Metal matrix nanocomposite powders comprising ceramic nanoparticles imbedded in metal matrix powder particles; wherein the metal matrix powder particles have a spherical shape; wherein there is uniform distribution the ceramic nanoparticles; wherein the nanocomposite powders have good flowability.

Chen, Lianyi↗

DOE OSTI2024

Flux Synthesis of A-site Disordered Perovskite La 0.5 M 0.5 TiO 3 (M$=$Li, Na, K) Nanorods Tailored for Solid Composite Electrolytes

Inorganic fillers play an important role in improving the ionic conductivity of solid composite electrolytes (SCEs) for Li-ion batteries. Among inorganic fillers, perovskite-type lithium lanthanum titanate (LLTO) stands out for its high bulk Li + conductivity on the order of 10 -3 S cm -1 at room temperature. According to a literature survey, the optimal LLTO filler should possess the following characteristics: i) a single-crystal structure to minimize grain boundaries; ii) a small particle size to increase the filler/polymer interface area; iii) a 1D morphology for efficient interface channels; and iv) cubic symmetry to facilitate rapid bulk Li + diffusion within the filler. However, the synthesis of single crystal, 1D LLTO nanomaterials with cubic symmetry is challenging. Herein, a flux strategy is developed to synthesize La 0.5 M 0.5 TiO 3 (LMTO, M$=$Li, Na, and K) single-crystal nanorods with an A-site-disordered, cubic perovskite phase. The flux media promotes the oriented growth of nanorods, prevents nanorods from sintering, and provides multiple alkali metal ion doping at M sites to stabilize the cubic phase. SCEs compositing the Li + -conducting LMTO nanorods as fillers and poly[vinylene carbonate- co -lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] matrix exhibit more than twice the conductivity of the neat polymer electrolyte (30.6 vs 14.0 µS cm -1 at 303 K).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Structure of the polysaccharide sheath from the B race of the green microalga Botryococcus braunii

The green microalga Botryococcus braunii forms a colony of cells held together by an intricate extracellular matrix. This extracellular matrix also acts as a storage location for liquid hydrocarbons initially produced inside the cells. These hydrocarbons can be used as feedstocks to produce transportation fuels. In the B race of B. braunii, the extracellular matrix is composed of several elements: a cross-linked hydrocarbon network filled with the liquid hydrocarbons, a retaining wall to hold the hydrocarbons in the extracellular matrix, an arabinogalactan polysaccharide fibrillar sheath that extends outward from the retaining wall, and a single protein known as polysaccharide associated protein is found at the base of the polysaccharide fibers where they connect to the retaining wall. During growth, colonies of the B race of B. braunii shed fragments of the retaining wall with polysaccharide fibrils attached into the media. Here we describe the isolation and structural analysis of these polysaccharides using a series of chemical degradations in combination with glycosyl residue composition and linkage analysis, as well as 2-dimensional nuclear magnetic resonance spectroscopy. The results demonstrate that the polysaccharide is highly branched, consisting of a galactan backbone with short branches comprised of Dgalactopyranose, L-arabinofuranose, 4-O-methyl-D-glucopyranuronic acid, and 6-deoxy-D-altropyranose. To our knowledge, this is the first description of 6-deoxyaltrose in algae or plants.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2015

Veggie ISS Validation Test Results and Produce Consumption

The Veggie vegetable production system flew to the International Space Station (ISS) in the spring of 2014. The first set of plants, Outredgeous red romaine lettuce, was grown, harvested, frozen, and returned to Earth in October. Ground control and flight plant tissue was sub-sectioned for microbial analysis, anthocyanin antioxidant phenolic analysis, and elemental analysis. Microbial analysis was also performed on samples swabbed on orbit from plants, Veggie bellows, and plant pillow surfaces, on water samples, and on samples of roots, media, and wick material from two returned plant pillows. Microbial levels of plants were comparable to ground controls, with some differences in community composition. The range in aerobic bacterial plate counts between individual plants was much greater in the ground controls than in flight plants. No pathogens were found. Anthocyanin concentrations were the same between ground and flight plants, while antioxidant and phenolic levels were slightly higher in flight plants. Elements varied, but key target elements for astronaut nutrition were similar between ground and flight plants. Aerobic plate counts of the flight plant pillow components were significantly higher than ground controls. Surface swab samples showed low microbial counts, with most below detection limits. Flight plant microbial levels were less than bacterial guidelines set for non-thermostabalized food and near or below those for fungi. These guidelines are not for fresh produce but are the closest approximate standards. Forward work includes the development of standards for space-grown produce. A produce consumption strategy for Veggie on ISS includes pre-flight assessments of all crops to down select candidates, wiping flight-grown plants with sanitizing food wipes, and regular Veggie hardware cleaning and microbial monitoring. Produce then could be consumed by astronauts, however some plant material would be reserved and returned for analysis. Implementation of this plan is a step toward developing pick-and-eat food production to supplement the packaged diet on ISS and for future exploration missions where plants could make up a larger portion of the diet. Supported by NASA Space Biology Program.

Food Safety↗

DOE OSTI2020

Miniaturized, automated in-vitro tissue bioreactor

In one embodiment, a system includes a bioreactor coupled to a substrate. The bioreactor includes: a plurality of walls defining a reservoir; a plurality of fluidic channels in at least some of the walls; a fluidic inlet in fluidic communication with the reservoir via, the fluidic channels; a fluidic outlet in fluidic communication with the reservoir via the fluidic channels; and one or more sensors coupled to the reservoir, each sensor being configured to detect one or more of: environmental conditions in the reservoir; and physiological conditions of one or more cells optionally present in the reservoir. In another embodiment, a method includes delivering media to a reservoir of a bioreactor; delivering a plurality of cells to the reservoir, controlling a reservoir temperature and a reservoir gas composition; using one or more of the sensors to monitor environmental and physiological conditions; and reporting the environmental and/or physiological conditions.

42 ENGINEERING↗

NASA NTRS1974

FOD impact testing of composite fan blades

The results of impact tests on large, fiber composite fan blades for aircraft turbofan engine applications are discussed. Solid composite blades of two different sizes and designs were tested. Both graphite/epoxy and boron/epoxy were evaluated. In addition, a spar-shell blade design was tested that had a boron/epoxy shell bonded to a titanium spar. All blades were tested one at a time in a rotating arm rig to simulate engine operating conditions. Impacting media included small gravel, two inch diameter ice balls, gelatin and RTV foam-simulated birds, as well as starlings and pigeons. The results showed little difference in performance between the graphite and boron/epoxy blades. The results also indicate that composite blades may be able to tolerate ice ball and small bird impacts but need improvement to tolerate birds in the small duck and larger category.

Johns, R. H.↗

NASA NTRS1974

FOD impact testing of composite fan blades

The results of impact tests on large, fiber composite fan blades for aircraft turbofan engine applications are discussed. Solid composite blades of two different sizes and designs were tested. Both graphite/epoxy and boron/epoxy were evaluated. In addition, a spar-shell blade design was tested that had a boron/epoxy shell bonded to a titanium spar. All blades were tested one at a time in a rotating arm rig to simulate engine operating conditions. Impacting media included small gravel, two inch diameter ice balls, gelatin, and RTV foam-simulated birds, as well as starlings and pigeons. The results showed little difference in performance between the graphite and boron/epoxy blades. The results also indicate that composite blades may be able to tolerate ice ball and small bird impacts but need improvement to tolerate birds in the small duck and larger category.

Johns, R. H.↗

NASA NTRS1974

Impact testing on composite fan blades

Johns, R. H.↗

DOE OSTI2022

Synthesis and Characterization of Pt‐Ag Icosahedral Nanocages with Enhanced Catalytic Activity toward Oxygen Reduction

Abstract There is an urgent need to develop cost‐effective electrocatalysts based on Pt for a broad spectrum of applications, including those vital to the operation of fuel cells. Hollowing out the interior of Pt nanocrystals offers a simple and viable strategy for maximizing the utilization efficiency of this precious metal while enhancing the electrocatalytic performance. Herein, we report the synthesis and electrocatalytic evaluation of Pt−Ag icosahedral nanocages with an average wall thickness of 1.6 nm. The Pt atoms are coated on the surface of Ag icosahedral seeds, leading to the formation of Ag@Pt nL core‐shell icosahedral nanocrystals with tunable shell thicknesses. The core‐shell nanocrystals are then converted to icosahedral nanocages by selectively etching away the Ag in the core. The as‐obtained nanocages with a composition of Pt 4.5 Ag exhibit an almost 3‐fold enhancement in specific activity toward oxygen reduction relative to the commercial Pt/C in acid media.

Wang, Wenxia↗

DOE OSTI2022

CO 2 supplementation eliminates sugar-rich media requirement for plant propagation using a simple inexpensive temporary immersion photobioreactor

In vitro plant propagation systems such as temporary immersion bioreactors (TIBs) are valuable tools that enable production of disease-free plants with improved traits. However, TIB systems can be expensive, difficult to implement, and prone to contamination due to sugar rich propagation media. Using rapidly growing chicory root cultures to expedite design-build-test cycles, we report here an improved, low-cost version of a previously reported Hydrostatically-driven TIB (Hy-TIB) that facilitates economical use of gas mixtures. Bioreactor improvements include decreased material costs, expanded modes of operation, and a horizontal orientation of a plastic film plant growth chambers that increase propagule light exposure. To take advantage of these improvements, we describe here experiments that evaluate the impacts of elevated CO 2 on propagation of cacao (Theobroma cacao) secondary embryos and nodal cultures of yam (Dioscorea spp.) during both phototrophic and photomixotrophic growth. Our experiments show that elevated CO 2 during plant propagation significantly improved both cacao and yam propagule development and eliminated the need for supplemental sugars in tissue culture growth media. Thus, our improved Hy-TIB shows potential as a simple, low-cost, and scalable propagation platform with cost-effective gas composition control and reduced risk of contamination overgrowth. We provide detailed instructions for assembly of this Hy-TIB design and discuss the implications of its adoption in food-insecure regions of the world.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Assessing Microbial Communities Related to Mercury Transformations in Contaminated Streambank Soils

In nature, the bioaccumulative potent neurotoxin methylmercury (MeHg) is produced from inorganic mercury (Hg) predominantly by anaerobic microorganisms. Hg-contaminated soils are a potential source of MeHg due to microbial activity. We examine streambank soils collected from the contaminated East Fork Poplar Creek (EFPC) in Tennessee, USA, where seasonal variations in MeHg levels have been observed throughout the year, suggesting active microbial Hg methylation. In this study, we characterized the microbial community in contaminated bank soil samples collected from two locations over a period of one year and compared the results to soil samples from an uncontaminated reference site with similar geochemistry (n = 12). Microbial community composition and diversity were assessed by 16S rRNA gene amplicon sequencing. Furthermore, to isolate potential methylators from soils, enrichment cultures were prepared using selective media. A set of three clade-specific primers targeting the gene hgcA were used to detect Hg methylators among the δ-Proteobacteria in EFPC bank soils across all seasons. Two families among the δ-Proteobacteria that have been previously associated with Hg methylation, Geobacteraceae and Syntrophobacteraceae, were found to be predominant with relative abundances of 0.13% and 4.0%, respectively. However, in soil enrichment cultures, Firmicutes were predominant among families associated with Hg methylation. Specifically, Clostridiaceae and Peptococcaceae and their genera Clostridium and Desulfosporosinus were among the ten most abundant genera with relative abundances of 2.6% and 1.7%, respectively. These results offer insights into the role of microbial communities on Hg transformation processes in contaminated bank soils in EFPC. Identifying the biogeochemical drivers of MeHg production is critical for future remediation efforts.

54 ENVIRONMENTAL SCIENCES↗