Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conducted Emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A hybrid method to evaluate the life cycle climate performance of heat pumps

Heat pumps have a significant impact on the climate, and numerous studies exist discussing the environmental impact of heat pumps quantitatively. Life Cycle Climate Performance (LCCP) is a widely accepted metric and can evaluate the carbon footprint of heat pumps from cradle to grave. LCCP calculation typically requires inputs like annual energy consumption, the material used, refrigerant type, and charge level, which are usually the intermediate or final results from heat pump simulation tools. Thus, a platform linking the heat pump simulation software, local weather conditions, and LCCP evaluation tool can simplify the heat pump design process, especially for complicated systems. This paper presents an LCCP evaluation tool accessing the outputs from the DOE Heat Pump Design Model and the building loads and temperature bin data from AHRI standard 210/240. As for case studies, this paper investigates the LCCP values and life cycle electricity costs (LCEC) of a given cooling-based heat pump with R410A in five typical US cities. In conclusion, this cooling-based heat pump has the highest LCCP value at Chicago and lowest LCCP value at Seattle. In contrast, the heat pump has the highest LCEC at Seattle and the lowest LCEC at Miami. As a future work, a more comprehensive carbon emission and cost analysis of heat pump systems will be conducted through all major cities around the world.

Shen, Bo↗
DOE OSTI2020

Giant isotope effect on phonon dispersion and thermal conductivity in methylammonium lead iodide

Lead halide perovskites are strong candidates for high-performance low-cost photovoltaics, light emission, and detection applications. A hot-phonon bottleneck effect significantly extends the cooling time of hot charge carriers, which thermalize through carrier–optic phonon scattering, followed by optic phonon decay to acoustic phonons and finally thermal conduction. To understand these processes, we adjust the lattice dynamics independently of electronics by changing isotopes. We show that doubling the mass of hydrogen in methylammonium lead iodide by replacing protons with deuterons causes a large 20 to 50% softening of the longitudinal acoustic phonons near zone boundaries, reduces thermal conductivity by ~50%, and slows carrier relaxation kinetics. Phonon softening is attributed to anticrossing with the slowed libration modes of the deuterated molecules and the reduced thermal conductivity to lowered phonon velocities. Our results reveal how tuning the organic molecule dynamics enables control of phonons important to thermal conductivity and the hot-phonon bottleneck.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Clean Air as a Bonus for Achieving Energy-Related State Goals: A Review of Policies and Programs in 15 States

This report explores connections between six common areas for state action on energy-related issues — resilience, economic development, energy affordability, electrifying transportation, grid modernization, and using local resources — and reducing air emissions. Although clean air often is not a driver for such state actions, they nonetheless reduce a variety of emissions, including particulates, nitrogen oxides, sulfur dioxide, and greenhouse gases like carbon dioxide. The study spans 15 geographically diverse states: Arizona, Delaware, Florida, Georgia, Indiana, Iowa, Kentucky, Louisiana, Missouri, Ohio, Pennsylvania, South Carolina, Tennessee, Texas and Utah. While these states have not adopted mandatory climate goals, they conduct a wide range of energy-related activities that reduce greenhouse gas emissions and other air pollutants as a side benefit.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

H i 21-cm absorption in radio-loud AGN with double-peaked [O iii ] emission

ABSTRACT Different physical processes in galaxy evolution, such as galaxy mergers that lead to coalescence of dual Active Galactic Nuclei (AGN) and outflows emanating from the narrow line region, can leave their imprint on the optical spectra of AGN in the form of double-peaked narrow emission lines. To investigate the neutral gas in the centres of such AGN, we have conducted a pilot survey of H i 21-cm absorption, using the upgraded Giant Metrewave Radio Telescope (uGMRT), in radio-loud AGN whose optical spectra show double-peaked [O iii] emission lines at z ≤ 0.4 (median z ≈ 0.14). Among the eight sources for which we could obtain clean spectra, we detect H i 21-cm absorption in three sources (detection rate of $38^{+36}_{-20}$ per cent) and find tentative indication of absorption in two other sources. The detection rate of H i 21-cm absorption is tentatively higher for the systems that show signatures of interaction or tidal disturbance (≳ 50 per cent) in the ground-based optical images than that for the systems that appear single and undisturbed (≈25 per cent). This is consistent with the high incidence of H i 21-cm absorption observed in z ≤ 0.2 galaxy mergers. Higher spatial resolution spectroscopy is required to confirm the origin of the H i absorbing gas, i.e. either gas infalling on to the radio-loud AGN, outflowing gas ejected by the AGN, or gas in rotation on the galactic-scale or circumnuclear discs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Energy Budget of Brittle Fracturing in Granite Under Stress Relaxation and Creep

Creep and relaxation are the two major time-dependent fracturing processes in rocks. While a considerable amount of research has been done in understanding these two mechanisms, critical gaps remain regarding how different energy components evolve during time-dependent fracturing processes in rocks. In this study, a series of relaxation and creep experiments were conducted on prismatic Barre granite specimens in the laboratory to estimate the energy budget of brittle fracturing in granite. For the input energy, the work done by the machine (W) is calculated and for the output energy the radiated seismic energy (E R ), released in the form of acoustic emissions (AEs), is calculated as the only measurable output energy component in the conducted experiments. The low-frequency plateau (Ω 0 ) and corner frequency (f 0 ) for each AE waveform was estimated by fitting the observed AE spectra with the theoretical spectra using the Omega model. These parameters were used to estimate the seismic moments (M 0 ) based on the radiation pattern for the double couple (shear) and non-double-couple (non-shear) events. The range of f 0 and M 0 varied from 150 to 750 kHz and 10 –4 to 10 –1 N m, respectively. Moment magnitude (M w ) varied in a wider range from –9 to –6 in creep and –8.5 to –7 in relaxation. Stress drops (Δ σ ) and source radius (r) were estimated for the AEs using Brune’s model. Here, the results report on three primary observations: (1) the effects of different source mechanisms on the estimated source parameters showed that M 0 and Δ σ were higher for DC events as compared to NDC in both relaxation and creep. (2) The radiation efficiency in the case of creep is 70% higher as compared to relaxation and, (3) the stress drop estimated in relaxation and creep demonstrated a breakdown in scaling with the seismic moment.

58 GEOSCIENCES↗
DOE OSTI2023

Extension of Large Fire Emissions From Summer to Autumn and Its Drivers in the Western US

Abstract Burned areas in the western US have increased ten‐fold since 1980s, which are attributable to multiple factors, including increasing heat, changing precipitation patterns, and extended drought. To better understand how these factors contribute to large fire emissions (gridded monthly fire emissions >95th percentile of all the fire emissions in the western US; 0.009 Gg/month), we build a machine learning model to predict fire emissions (PM 2.5 ) over the western US at 0.25° resolution, interpreted using explainable artificial intelligence (XAI). From the predictor contributions derived from XAI, we conduct k‐means clustering analysis to identify four clusters of predictor variables representing different drivers of large fire emissions. The four clusters feature the contributions of fuel load (Cluster 1) and different levels of dryness (Cluster 2–4), controlled by fuel moisture, drought condition, and fire‐favorable large‐scale meteorological patterns featuring high temperature, high pressure, and low relative humidity. In the past two decades, large fire emissions peak in summer. However, large fire emissions increased significantly in September and October in 2010–2020 relative to 2000–2009, extending the peak large fire emissions from summer to autumn. The larger enhancements of large fire emissions during autumn compared to summer are contributed by decreased fuel moisture, along with more frequent concurrent fire‐favorable large‐scale meteorological patterns and drought. These results highlight fuel drying as a common driver supported by multiple drivers, such as warmer temperature and more frequent synoptic patterns favorable for fires, in increasing the autumn risk of large fire emissions across the western US.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Initial Considerations for Large-Scale Carbon Removal in the United States

The Biden Administration has established a goal of removing 1 Gt carbon dioxide equivalents per year (CO 2e /yr) from the atmosphere and of achieving net zero greenhouse gas emissions (GHG) by 2050. Our team of leading academic and DOE national laboratory experts is conducting the first economy-wide technical evaluation of the options for achieving this carbon dioxide removal (CDR) goal. The net zero goal includes targets of 100% clean electricity by 2035 with 40% GHG emissions reductions by 2030, which helps set primary scenario boundaries for our analysis of the CDR supply curve. Our analysis will evaluate feasibility, performance, and costs on a county level for the entire USA (including AK and HI where possible), considering all removal methods that are currently well-enough developed for us to estimate the likely costs in 2050. We anticipate that more than 1 Gt CO 2e of removal will be available to the Nation. We will identify how much of each CO 2 removal approach is available in specific regions of the Nation and provide cumulative costs and volumes (a supply curve) by region for 2050. We expect to complete this detailed analysis by late 2023.

42 ENGINEERING↗
DOE OSTI2022

Sub-threshold ultrafast one-photon photoemission from a Cu(111) photocathode

Single-photon photoemission of electrons for incident photon energies below the surface work function is reported for a single-crystal Cu(111) photocathode. Spectral characterization of the quantum efficiency and mean transverse energy of the emitted electrons is shown to be consistent with emission from a thermalized hot electron distribution photoexcited on sub-picosecond time scales into an upper conduction band at the L-point of the Brillouin zone of copper. To our knowledge, this is the first time that such excited-state thermionic emission has been observed from a planar metal photocathode, and then from a commonly used photocathode material. The results, therefore, indicate the potential importance of such band structure dependent sub-threshold photoemission mechanisms on the performance of photocathodes employed for the generation of short electron pulses using sub-picosecond laser pulses. Consequently, the combined experimental and theoretical work presented in this paper contributes to solid-state photocathode-based research aimed at our understanding and selection (or discovery) of high brightness photo-electron sources required for many electron-based diffraction, imaging, and accelerator applications.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Decarbonizing all-electric communities via carbon-responsive control of behind-the-meter resources

The progression of electrification in the building and transportation sectors brings new opportunities for energy decarbonization. With higher dependence on the grid power supply, the variation of the grid carbon emission intensity can be utilized to reduce the carbon emissions from the two sectors. Existing coordinated control methods for buildings with distributed energy resources (DERs) either consider electricity price or renewable energy generation as the input signal, or adopt optimization in the decision-making, which is difficult to implement in the real-world environment. This paper aims to propose and validate an easy-to-deploy rule-based carbon responsive control framework that facilitates coordination between all-electric buildings and electric vehicles (EVs). The signals of the grid carbon emission intensity and the local photovoltaics (PV) generation are used for shifting the controllable loads. Extensive simulations were conducted using a model of an all-electric mixed-use community in a cold climate to validate the control performance with metrics such as emissions, energy consumption, peak demand, and EV end-of-day state-of-charge (SOC). Our study identifies that 4.5% to 27.1% of annual emission reduction can be achieved with limited impact on energy costs, peak demand, and thermal comfort. Additionally, up to 32.7% of EV emission reduction can be obtained if the EV owners reduce the target SOC by less than 21.2%.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Initial Engineering and Design for CO 2 Capture from Ethanol Facilities

The Energy & Environmental Research Center, in partnership with the U.S. Department of Energy (DOE) and North Dakota ethanol producer Red Trail Energy, LLC (RTE) and with technical support from Trimeric Corporation and the KLJ engineering firm, completed an initial engineering design (IED) for a hybrid capture system to estimate associated costs for retrofitting the operational RTE ethanol plant. The project goal supports the DOE objective to achieve negative emissions using commercially available technologies to attain Technology Readiness Level 6+ from a facility emitting >100,000 tonnes of carbon dioxide (CO 2 ) annually. The RTE CCS (carbon capture and storage) Project is currently operating a CO 2 capture facility, adjacent to the RTE ethanol facility in western North Dakota, and injecting the CO 2 more than a mile below RTE property for permanent storage. This novel hybrid capture system would process about 310,000 tonnes of CO 2 annually for the RTE host site and includes CO 2 capture and compression from bioprocessing as well as capturing CO 2 produced from natural gas boilers. The bioprocessing capture process, based on past RTE studies investigating ammonia liquefaction technology with CO 2 produced from natural gas boilers captured utilizing chemical absorption with amine, was shown to be technically feasible for the RTE site. Activities conducted to support the project goal included 1) designing a hybrid capture system using CO 2 emissions from both bioprocessing and heat production at the host site facility; 2) conducting a pre-front-end engineering and design analysis of the hybrid capture system to include environmental health and safety, a constructability report, identification of permits, and corporate approvals; and 3) performing a techno-economic assessment in accordance with DOE’s methodology, as demonstrated by the bituminous baseline study. In addition, a life cycle assessment (LCA) was completed for the RTE site to estimate the carbon life cycle for ethanol-CCS implementation using the designed hybrid capture system to determine potential for net-negative carbon emissions. Results of the IED showed the hybrid system to be technically viable, with a moderate estimated cost of $55/tonne CO 2 captured for the hybrid system. The cradle-to-gate LCA showed preliminary net-negative carbon emissions potential anticipated from implementing a hybrid CCS system at a commercial scale. Recommended next steps toward potential implementation include hybrid capture system demonstration testing for detailed engineering and LCA model comparisons with low-carbon fuel incentive programs for financial support.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Life cycle greenhouse gas emissions and energy use of polylactic acid, bio-derived polyethylene, and fossil-derived polyethylene

Bioplastics recently have become an attractive, viable, and popular alternative to conventional petroleum-based plastics, with the hope that replacing fossil-derived plastics with renewable alternatives will reduce greenhouse gas (GHG) emissions and fossil energy consumption (FEC). The bioplastic industry is encouraging creative designs and enhanced properties such as biodegradability, which is considered a sustainable solution for waste plastic management. However, biodegradability also means that carbon in the product is emitted to the atmosphere as GHG emissions. In this paper, a life cycle analysis (LCA) of biodegradable polylactic acid (PLA) and bio-polyethylene (bio-PE) plastics was conducted to understand the environmental effects of these bioplastics from feedstock production to product end-of-life (EOL). In particular, emissions from biodegradability (EOL emissions) are accounted for. The results were compared to those of conventional fossil-based plastics such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Results showed that the lowest GHG emissions (-1.0 and 1.7 kg CO 2 e per kg for bio-PE and PLA with no biodegradation, respectively) and FEC (29 and 46 MJ per kg of bio-PE and PLA, respectively) were achieved with bio-derived plastics, particularly bio-PE plastic. However, despite the benefits of biogenic carbon uptake, when landfill and composting emissions were considered for the PLA pathway, the life cycle emissions of PLA increase significantly, from 16% to 163% depending on the biodegradation condition, compared to the case where there is no degradation in the landfill. This study also contributed to understand the effects on the GHG emissions of biodegradability in landfill and composting scenarios, regional electricity mix, and plastics manufacturing technologies. (C) 2020 The Authors. Published by Elsevier Ltd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Memristive Behavior Enabled by Amorphous–Crystalline 2D Oxide Heterostructure

The emergence of memristive behavior in amorphous–crystalline 2D oxide heterostructures, which are synthesized by atomic layer deposition (ALD) of a few-nanometer amorphous Al 2 O 3 layers onto atomically thin single-crystalline ZnO nanosheets, is demonstrated. The conduction mechanism is identified based on classic oxygen vacancy conductive channels. ZnO nanosheets provide a 2D host for oxygen vacancies, while the amorphous Al 2 O 3 facilitates the generation and stabilization of the oxygen vacancies. The conduction mechanism in the high-resistance state follows Poole–Frenkel emission, and in the the low-resistance state is fitted by the Mott–Gurney law. From the slope of the fitting curve, the mobility in the low-resistance state is estimated to be ≈2400 cm 2 V -1 s -1 , which is the highest value reported in semiconductor oxides. When annealed at high temperature to eliminate oxygen vacancies, Al is doped into the ZnO nanosheet, and the memristive behavior disappears, further confirming the oxygen vacancies as being responsible for the memristive behavior. The 2D heterointerface offers opportunities for new design of high-performance memristor devices.

2D heterostructures↗
DOE OSTI2021

Characterization of Two Extraordinary AmLi Neutron Sources

Two legacy AmLi sources, MRC-101 and MRC-103, are routinely used for neutron detector characterization and testing campaigns that Pacific Northwest National Laboratory manages for the Defense Threat Reduction Agency within the U.S. Department of Defense. However, applicability of source measurement data has been substantially limited due to the lack of original manufacturer documentation and cross comparison to other sources. This paper summarizes results of the measurement campaign conducted to better quantify source radionuclide content, neutron energy spectrum and emission rate of the AmLi sources. The source characterization study consisted of three major consecutive measurement exercises. First, gamma spectrometry measurements using a high purity germanium detector were used to estimate the radionuclide content and potential impurities of the AmLi sources. Then neutron spectral measurements were taken to determine the unique neutron energy distribution. Finally, assessments of the total neutron yields of the sources were made with measurements in a neutron well counter. The neutron detection efficiency for these measurements was determined via detailed Monte Carlo modeling based on the neutron energy distribution measured with the rotating neutron spectrometer. The most exciting and unexpected finding of the study was a significant contamination of the source material with beryllium, contributing up to 17% to the total neutron emission rate and correspondingly changing the neutron energy spectrum. Also, the obtained lithium-only portion of the measured energy distribution of the sources was compared against several AmLi spectra previously reported by different researchers.

AWCC, AmLi, beryllium contamination, neutron spect↗
DOE OSTI2022

Receiver willingness to participate in off-hour service programs

Service trips, a frequently overlooked segment of urban traffic, represent a disproportionately large share of the negative impacts associated with commercial activity. The reason is that although service trips are less frequent than freight trips, they often take longer and thus occupy a significant share of commercial parking. Demand management programs seeking to move service trips off-hours can potentially reduce congestion and emissions but they have been understudied. Here, this paper describes research conducted to investigate receivers’ willingness to participate in off-hour programs for planned service activity. The research reported in this paper analyzes results from a survey of 189 business establishments in New York City and the Capital Region in New York State using descriptive analyses of the data, and by estimating a discrete choice model to gain insight into how business characteristics influence willingness to participate in off-hour services. To assess the impacts of a hypothetical off-hour services program, the authors applied the discrete choice model, together with service trip attraction models, to quantify the hours of daytime parking that could be eliminated by the proposed program in certain ZIP Codes in New York City and the Albany area. The research conducted led to the identification of numerous policy implications that will help policymakers understand and maximize the potential benefits of implementing off-hour service programs.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Fault Slip and Fluid Flow: Seismic Source Analysis to Assess Role of Multiple Slip Patches in Fault Permeability

The relationship between fault reactivation, microearthquakes (MEQs), and permeability evolution during fluid injection plays a critical role in energy harvesting and waste disposal. Recent studies have demonstrated the possibility of predicting fault permeability using cumulative seismic moments of MEQs quantitatively. To understand the underlying physical processes, we conduct fault reactivation experiments using Utah FORGE granitoid and analyze acoustic emission (AE) signals generated during stepwise increases in fluid injection pressure. Frequency analysis of thousands of calibrated AE signals reveals that fault reactivation produces multiple AE source patches with millimeter-scale radii—smaller than the sample fault radius. The cumulative area of the reactivated patches covers the fault multiple times over (∼10x–50x area) for each pressure step. These findings provide mechanistic insight that measured permeability enhancement is not driven by a single large slip event, but by the sequential and interacting activation of multiple slip patches that create a continuous flow pathway.

Nurshal, M. E. M. [Pennsylvania State University, ↗
DOE OSTI2021

MASCOT: an ESO–ARO legacy survey of molecular gas in nearby SDSS-MaNGA galaxies - I. First data release, and global and resolved relations between H 2 and stellar content

We present the first data release of the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA)–Arizona Radio Observatory (ARO) Survey of CO Targets (MASCOT), a European Southern Observatory public spectroscopic survey conducted at the ARO. We measure the CO(1–0) line emission in a sample of 187 nearby galaxies selected from the MaNGA survey that has obtained integral field unit (IFU) spectroscopy for a sample of ~10 000 galaxies at low redshift. The main goal of MASCOT is to probe the molecular gas content of star-forming galaxies with stellar masses >10 9.5 M ⊙ and with associated MaNGA IFU observations and well-constrained quantities like stellar masses, star formation rates, and metallicities. In this paper, we present the first results of the MASCOT survey, providing integrated CO(1–0) measurements that cover several effective radii of the galaxy and present CO luminosities, CO kinematics, and estimated H 2 gas masses. We observe that the decline of the galaxy star formation rate with respect to the star formation main sequence increases with the decrease of molecular gas and with a reduced star formation efficiency, in agreement with results of other integrated studies. Relating the molecular gas mass fractions with the slope of the stellar age gradients inferred from the MaNGA observations, we find that galaxies with lower molecular gas mass fractions tend to show older stellar populations close to the galactic centre, while the opposite is true for galaxies with higher molecular gas mass fractions, providing tentative evidence for inside-out quenching.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Clean Energy in Oil & Gas Consortium: Compressor Station Case Study

JISEA conducted analysis of technical and economic potential of incorporating low-emissions energy sources into various oil and gas operations in different locations to assist the oil and gas industry with decision-making. The case study analysis presented here evaluated renewable energy opportunities at an all-electric compressor station located in Texas.

Baker Hughes↗
DOE OSTI2022

Carbon emission responsive building control: A case study with an all-electric residential community in a cold climate

In the United States, buildings account for 35% of total energy-related carbon dioxide emissions, making them important contributors to decarbonization. Carbon intensities in the power grid are time-varying and can fluctuate significantly within hours, so shifting building loads in response to the carbon intensities can reduce a building’s operational carbon emissions. This paper presents a rule-based carbon responsive control framework that controls the setpoints of thermostatically controlled loads responding to the grid’s carbon emission signals in real time. Based on this framework, four controllers are proposed with different combinations of carbon accounting methods and control rules. To evaluate their performance, we performed simulation studies using models of a 27-home, all-electric, net zero energy residential community located in Basalt, Colorado, United States. The carbon intensity data of four future years from the Cambium data set are adopted to account for the evolving resource mix in the power grid. Various performance metrics, including energy consumption, carbon emission, energy cost, and thermal discomfort, were used to evaluate the performance of the controllers. Sensitivity analysis was also conducted to determine how the control thresholds and intervals affect the controllers’ performance. Simulation results indicate that the carbon responsive controllers can reduce the homes’ annual carbon emissions by 6.0% to 20.5%. However, the energy consumption increased by 0.9% to 6.7%, except in one scenario where it decreased by 2.2%. Compared to the baseline, the change in energy cost was between –2.9% and 3.4%, and thermal discomfort was also maintained within an acceptable range. The little impact on energy cost and thermal discomfort indicates there are no potential roadblocks for customer acceptance when rolling out the controllers in utility programs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗