Search NASA⌕ Search

SEARCH · Search NASA

Results for “Grain aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Grossite-Bearing Refractory Inclusions from Reduced CV Chondrites: Mineralogical and Oxygen Isotopic Constraints on the Parent Body Alteration History

We report the results of coordinated mineralogical, microstructural, and oxygen isotopic analyses of grossite-bearing refractory inclusions from reduced CV (Vigarano type) chondrites to obtain a more complete picture of secondary parent body alteration processes and conditions. Grossite (CaAl 4 O 7 ) occurs in cores of nodules in fine-grained Ca,Al-rich inclusions (CAIs) that likely represent aggregates of nebular condensates. In many occurrences, grossite has been partially replaced by hercynite [(Fe,Mg,Zn)Al 2 O 4 ], which displays complex microstructures and compositions, and magnetite nanoparticles. The alteration of grossite was a crystallographically-controlled, fluid-driven process that occurred via partial dissolution of grossite and subsequent precipitation of hercynite and magnetite during short-lived and low-temperature metasomatic alteration on the CV chondrite parent body. The constituent phases of grossite-bearing CAIs show heterogeneous oxygen isotopic compositions, with grossite and perovskite displaying systematically 16O-depleted compositions (Δ 17 O = −12‰ to −1‰) relative to uniformly 16 O-rich hibonite and spinel (Δ 17 O = −25‰ to −21‰). Melilite is variably 16 O-depleted (Δ 17 O = −25‰ to −2‰). The observed oxygen isotopic distribution is interpreted as a result of mineralogically controlled oxygen isotopic exchange with an 16 O-poor fluid on the CV chondrite parent body. Collectively, the presence of limited fluids played an important role in preferential alteration of grossite to hercynite and magnetite and various degrees of 16O depletion in grossite, perovskite, and melilite during thermal metamorphism. We conclude that, among refractory phases in the inclusions, grossite was the most susceptible to metasomatic reactions with Fe-rich fluids and the second most susceptible, after perovskite, to oxygen isotopic exchange with an 16 O-poor fluid during the thermal history of the CV chondrite parent asteroid.

Calcium-aluminum-rich inclusions↗

Mineralogical and Al-Mg Isotopic Study of Fine-Grained Ca-Al-Rich Inclusions

Fine-grained Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites are interpreted as aggregates of nebular gas-solid condensates that escaped significant melting.Thus far, a small number of FGIs from CV3 chondrites have been analyzed, showing a range of (26Al/27Al)0=~5.4×10−5to ~3.4×10−5.These values are similar to (26Al/27Al)0inferred from coarse-grained, igneous CAIs (CGIs) from CV3 chondrites.This observed spread in (26Al/27Al)0values indicates the CAI formation over an extended time period. However, more analyses are needed to determine if the FGIs formed continuously over a significant time period or by multiple episodic events of nebular condensation. In this study, we present high-precision Al-Mg isotopic data of FGIs from reduced CV3 chondrites to better constrain their formation timescale relative to CGIs in CV3 chondrites, as well as to smaller FGIs in CO3 chondrites. This isotopic study is coordinated with a FIB/TEM study to elucidate the origin and nature of FGIs in the petrologic and mineralogical context.

J Han↗

Aggregation bias and its drivers in large‐scale flood loss estimation: A Massachusetts case study

Abstract Large‐scale estimations of flood losses are often based on spatially aggregated inputs. This makes risk assessments vulnerable to aggregation bias, a well‐studied, sometimes substantial outcome in analyses that model fine‐grained spatial phenomena at coarse spatial units. To evaluate this potential in the context of large‐scale flood risk assessments, we use data from a high‐resolution flood hazard model and structure inventory for over 1.3 million properties in Massachusetts and examine how prominent data aggregation approaches affect the magnitude and spatial distribution of flood loss estimates. All considered aggregation approaches rely on aggregate structure inventories but differ in whether flood hazard is also aggregated. We find that aggregating only structure inventories slightly underestimates overall losses (−10% bias), and when flood hazard data is spatially aggregated to even relatively small spatial units (census block), statewide aggregation bias can reach +366%. All aggregation‐based procedures fail to capture the spatial covariation of inputs distributions in the upper tails that disproportionately generate total expected losses. Our findings are robust to several key assumptions, add important context to published risk assessments and highlight opportunities to improve flood loss estimation uncertainty quantification.

54 ENVIRONMENTAL SCIENCES↗

The Ice and Silicate Spectral Features for Dust Aggregates

The optical properties of inhomogeneous aggregates of dust particles are calculated. The Discrete Dipole Approximation (DDA) is applied to the calculation of light scattering by the dust aggregates. The mixtures of ices and silicates are considered. The IR profiles near ice and silicate spectral features (3 micron and 10 micron) are constructed. The influence of grain topology, chemical composition and porosity have been investigated. The comparison of exact results for inhomogeneous aggregate and the effective medium theory (the rules of Maxwell-Garnett and Bruggeman) is made.

Ilin, A. E.↗

Presolar Grains in Bennu: Constraints From C and N Isotopic Compositions

Primitive chondrites, including CI and CM types, are known to contain a rich variety of presolar grains that were seeded into the protoplanetary disk from neighboring stars and stellar objects prior to aggregation into asteroidal parent bodies. Stepped combustion using the FINESSE instrument at the Open University (OU) was employed to determine whether material from Bennu contains populations of presolar grains similar to those of CI and CM chondrites as well as recently returned samples from Ryugu.

M M Grady↗

Lunar soil grain size distribution

A comprehensive review has been made of the currently available data for lunar grain size distributions. It has been concluded that there is little or no statistical difference among the large majority of the soil samples from the Apollo 11, 12, 14, and 15 missions. The grain size distribution for these soils has reached a steady state in which the comminution processes are balanced by the aggregation processes. The median particle size for the steady-state soil is 40 to 130 microns. The predictions of lunar grain size distributions based on the Surveyor television photographs have been found to be quantitatively in error and qualitatively misleading.

Carrier, W. D., III↗

Mg Isotopic Compositions of Fine-Grained Ca-Al-Rich Inclusions from Reduced CV3 Chondrites and Implications on the Timescale of Nebular Condensation

Fine-grained Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites are interpreted as aggregates of nebular gas-solid condensates that escaped significant melting [1]. Recent Al-Mg isotopic studies of small FGIs (<200 µm in size) from pristine CO3 chondrites have revealed significant variations in initial 26Al/27Al ratio, (26Al/27Al)(sub 0), spanning from 5.73×10(exp ˗5) to 8×10(exp ˗6) [2,3]. Importantly, [3] found a main CAI population characterized by (26Al/27Al)(sub 0) = 5.4×10(exp ˗5) that likely record the onset of dust condensation and initial coagulation events, followed by multiple thermal events over an extended time period. Thus far, a small number of large FGIs from CV3 chondrites have been analyzed, showing a narrower range of ( 26Al/27Al)(sub 0) = 5.27×10(exp ˗5) to 3.35×10(exp ˗5) [4-6], similar to those inferred from coarse-grained, igneous CAIs (CGIs) from CV3 chondrites [7]. These observed different ratios may raise a question if large FGIs in CV3 chondrites record a time interval from primary direct condensation of refractory solids to their aggregation and growth into larger inclusions. In this study, we present Al-Mg isotopic compositions of FGIs from reduced CV3 chondrites to better constrain their formation timescale relative to smaller FGIs in CO3 chondrites, as well as to CGIs in CV3 chondrites. This isotopic study is coordinated with a microstructural study to elucidate the origin and nature of FGIs in the petrologic and mineralogical context.

Han, J.↗

Petrology of Apollo 15 black-and-white rocks 15445 and 15455 - Fragments of the Imbrium impact melt sheet

The paper describes two macroscopically similar black-and-white rocks, 15445 and 15455, which were collected from the rim of Spur Crater on the Apennine Front. The two Apollo 15 rocks are very similar in chemistry and clast population, but the matrix of 15455 is finer grained than that of 15445. The 15445 sample contains a lithic clast assemblage of plutonic/metamorphic spinel troctolite, troctolite, norite, and anorthosite, and its fine-grained vesicular black coherent matrix consists of a melt-bonded aggregate of small mineral clasts which are mainly olivine, plagioclase, and pink spinel. The two rocks are distinct from any other large samples from the Apollo 15 site. It is suggested that the rocks are samples of an impact melt sheet which forms a bedrock unit of the Apennine Front, and that this melt sheet did not form in a local small-scale event but was produced during the Imbrium impact event.

Ryder, G.↗

Abrasion by aeolian particles: Earth and Mars

Estimation of the rate of aeolian abrasion of rocks on Mars requires knowledge of: (1) particle flux, (2) susceptibilities to abrasion of various rocks, and (3) wind frequencies on Mars. Fluxes and susceptibilities for a wide range of conditions were obtained in the laboratory and combined with wind data from the Viking meteorology experiment. Assuming an abundant supply of sand-sized particles, estimated rates range up to 2.1 x 10 to the minus 2 power cm of abrasion per year in the vicinity of Viking Lander 1. This rate is orders of magnitude too great to be in agreement with the inferred age of the surface based on models of impact crater flux. The discrepancy in the estimated rate of abrasion and the presumed old age of the surface cannot be explained easily by changes in climate or exhumation of ancient surfaces. The primary reason is thought to be related to the agents of abrasion. At least some sand-sized (approx. 100 micrometers) grains appear to be present, as inferred from both lander and orbiter observations. High rates of abrasion occur for all experimental cases involving sands of quartz, basalt, or ash. However, previous studies have shown that sand is quickly comminuted to silt- and clay-sized grains in the martian aeolian regime. Experiments also show that these fine grains are electrostatically charged and bond together as sand-sized aggregates. Laboratory simulations of wind abrasion involving aggregates show that at impact velocities capable of destroying sand, aggregates from a protective veneer on the target surface and can give rise to extremely low abrasion rates.

Greeley, R.↗

Variations among chondrite groups: Constraints on nebular processes

Diverse proportions of the four major ingredients are found in the 13 chondrite groups. Ca-Al-rich inclusions (CAI) include amoeboid-olivine aggregates, which contain refractory nodules. Matrix material forms aggregates and rims on other constituents and contains micrometer-sized grains and a small, uniform concentration of presolar grains. Fe, Ni grains are mostly derived from hot chondrules. Although bulk nonvolatile chondritic elemental ratios are typically within 30% of solar values, individual CAI and some chondrules shown large deviations.

Scott, E. R. D.↗

Primitive Oxygen-, Nitrogen-, and Organic-Rich Vein Preserved in a Xenolith Hosted in the Metamorphosed Carancas Meteorite

Primitive xenolithic CI-like carbonaceous (C) clasts are sometimes hosted within meteorites of a different origin (ordinary chondrite, ureilite, howardite, and eucrite). These xenoliths contain aggregates of macromolecular carbon (MMC), which are often present as discrete grains and exhibit a wide range of structural order and chemical compositions. The Carancas meteorite is a H4-5 that impacted south of Lake Titicaca, Peru in 2007. While the meteorite exhibits extensive recrystallization of the matrix indicating metamorphism, it contains dark, CI-like clasts that show no evidence of heating. Similar to other xenolithic clasts, the examined C clast of Carancas contains MMC, which however exists in the form of a vein-like structure dissimilar to the typical occurrence of MMC in meteorites. We investigated the organic and isotopic compositions of the organic-rich vein with C,N,O-X-ray absorption near-edge structure (XANES), Raman spectroscopy, and NanoSIMS, in order to constrain its possible origin.

Chan, Q. H. S.↗

Mineralogy of Stardust Track 112 Particle: Relation to Amoeboid Olivine Aggregates

The successful analysis of comet 81P/Wild 2 particles returned by the Stardust mission has revealed that the Wild 2 dust contains abundant silicate grains that are much larger than interstellar grains and appear to have formed in the inner regions of the solar nebula [1]. Wild 2 particles include minerals which are isotopically and mineralogically similar to CAIs [e.g., 2, 3] and chondrules [e.g., 4] in chondrites. In addition, particles similar to amoeboid olivine aggregates (AOAs) also have been discovered [5, 6,7]. C2067,2,112,1 is a terminal particle recovered from track #112 (T112). Nakamura-Messenger et al. [7] showed that the forsterite grain in T112 has O-16 enrichment of approximately 40 0/00 (vs. SMOW) and possibly formed together with AOAs. In this study, we have examined the mineralogy of the T112 particle and compared the possible relationships between T112 and AOAs in primitive meteorites.

Komatsu, M.↗

Coarse-Grained Simulations of Polyrotaxane Hydrogels under Quiescent and Shear Conditions

Cyclodextrin-based polyrotaxanes (PR) form hydrogels in water through cyclodextrin (CD) aggregation and crystallization. These networks can break under shear flows, making them versatile platforms for extrusion-based 3D printing. To optimize the material properties of 3D-printed PR gels, a microscopic understanding of the structural evolution during 3D printing is necessary. Here, we employ coarse-grained (CG) simulations to reveal the PR assembly process at the molecular level. Our simulations reproduce the experimental crystal morphologies of PR at varying concentrations and chain lengths under quiescent conditions. Using nonequilibrium simulations, we show shear flow ruptures crystalline domain connectivity in PR gels and stacks the lamellae in the gradient direction, allowing the materials to flow during 3D printing. After the cessation of flow, the anisotropic crystal alignment and absence of available dangling PR diminish the intercrystal connectivity. The printed materials are therefore mechanically weaker than the pristine hydrogels, in agreement with experimental results. Nonetheless, by relating the microscopic structural evolution with viscoelastic properties of PR gels and solutions, we elucidate how flow conditions and sample composition affect the 3D printing performance of PR hydrogels.

Smith, Cameron D. [Dartmouth College, Hanover, NH ↗

Sintering effects on NpO 2 grain size and morphology: The role of precursor Np phase

Neptunium dioxide (NpO 2 ) is a key phase in nuclear material processing as a target material for the production of plutonium-238 ( 238 Pu) and has been historically synthesized via the calcination of a Np oxalate precursor. Alternative synthesis methods for NpO 2 are now more prevalent, necessitating their study and comparison with the more common oxalate route. The purpose of this work was to investigate the microstructural properties of NpO 2 synthesized from a nitrate-based Np precursor phase via the assessment of NpO 2 particle size and morphology as a function of calcination temperature and time. Scanning electron microscopy (SEM) was used to probe the primary grain size and morphology of NpO 2 after calcination at temperatures ranging from 700 to 1100 °C and hold times ranging from 1 to 10 h. Post-image analysis using ImageJ software enabled the quantification of mean particle diameter. This analysis indicated that particle diameter increases with both increasing calcination temperature and hold time. Primary particles were shown to be clumped in irregular patterns into the overall rough, blocky aggregates, but this macroscopic morphology was not affected by calcination time or temperature. Although trends in primary grain size of NpO 2 were consistent with available literature from other Np precursor phases, the macroscopic morphology of the NpO 2 aggregates was quite different than reported for other precursors. Through comparison with historical literature on Np oxalate, this work emphasizes the importance of Np precursor on the physical properties of NpO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fine-Grained, Spinel-Rich Ca-Al-Rich Inclusions From The Reduced CV3 Chondrite Efremovka: A Genetic Link To Wark-Lovering Rims?

Fine-grained, spinel-rich Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites, mostly CV3 chondrites, are interpreted as aggregates of nebular gas-solid condensates that escaped significant melting [1]. Multiple lines of evidence suggest a condensation origin for FGIs, including their layered structures and irregular shapes and the fine grain size of numerous spinel-cored nodules [e.g., 2,3], and the distinctive volatility-fractionated group II rare earth element patterns of bulk inclusions and their mineral constituents [e.g., 4,5]. The origin and nature of FGIs are poorly constrained because of their fine grain sizes and intimate intergrowths of refractory phases, combined with their susceptibility to secondary parent body alteration processes, making detailed mineralogical and petrologic characterizations difficult using scanning electron microscope (SEM) and electron microprobe techniques. In this study, we present preliminary transmission electron microscope (TEM) analyses of pristine FGIs from the reduced CV3 chondrite Efremovka in order to provide the detailed characterization of their micrometer- to nanometer-scale textures and chemical compositions. Our goals are to better understand the formation processes and conditions of FGIs in the early solar nebula and to explore their possible genetic relationship with other early-formed refractory inclusions and their rims.

Keller, L. P.↗

Origin of the high-temperature fraction of C2 chondrites

The coarse-grained fraction of C2 chondrites is composed mostly of single crystals and aggregates of crystals of Mg-rich olivine and pyroxene. They do not possess compelling textural evidence of being the solidification products of rapidly-quenched molten droplets. Metal inclusions in the silicates contain 3.82-8.88 mole% Ni, 0.16-0.70% Co, 0.17-1.07% Cr, and up to 5.70% P. Thermodynamic calculations show that alloys of these compositions may be condensates from the solar nebula. The implication is that the high-temperature fraction of C2 chondrites consists mostly of high-temperature condensates.

Grossman, L.↗

Microstructural Constraints on the Formation of Diamond in Ureilites, the Case from the Kenna Meteorite

The origin of diamonds in ureilitic meteorites, a major family of ultramafic achondrites, has long been debated, with various formation mechanisms inferred, including: 1) shock conversion of preexisting graphite due to a hypervelocity impact on the ureilite parent body; 2) vapor deposition during condensation of the solar nebula; or 3) static transformation in the mantle of a large planetesimal (>1000 km in diameter). The Kenna ureilite is a 10.9 kg stone that was found in Kansas in 1972 and is dominantly composed of olivine and pigeonite (68% and 22% modal abundance, respectively), together with minor metal and carbon-rich regions. Within the carbon-rich domains researchers have identified microdiamonds up to ~10 µm in size. Due to the proximity of the extremely hard microdiamonds with soft graphite and moderately hard silicates, achieving an appropriately flat surface for electron backscatter diffraction (EBSD) analysis has proved challenging. We have, therefore, employed a Hitachi ArBlade 5000 broad beam Ar ion milling system to prepare a sample with an adequate surface uniformity. The ion milling dramatically improved indexing of the EBSD patterns and facilitated high-resolution microstructural analysis of the carbon-rich domains. The carbon-bearing regions occur as tabular domains between polygonal olivine and pigeonite, and are composed of aggregates of micrometer-scale diamond with intermediate graphite, oxides and metal grains. Within the microdiamonds, {111} twins are abundant, many of which form ragged lamellae consistent with mechanical twinning. The microdiamond assemblages appear to pseudomorph tabular graphite habits, which together with the abundant deformation twins, supports a shock transformation mechanism for microdiamond formation within the Kenna meteorite. To compliment the EBSD microstructural analyses, coordinated laser Raman, focused ion beam/transmission electron microscopy imaging and diffraction data, and NanoSIMS N and C tomographic isotopic imaging will be collected. These data will provide further constraints on the formation of diamonds within ureilites.

Timmons M Erickson↗