Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarization transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Synthesis and characterization of Mn-Bi alloy

High purity MnBi low temperature phase has been prepared and analyzed using X-ray diffraction, Lorentz-Polarization Factor and Fourier transforms infrared measurement. After synthesis of samples structural characterization has done on samples by X-ray diffraction, which shows that after making the bulk sample is in no single phase MnBi has been prepared by sintering Mn and Bi powders. By Lorentz-Polarization Factor is affecting the relative intensity of diffraction lines on a powder form. And by FTIR which shows absorption peaks of MnBi alloys.

36 MATERIALS SCIENCE↗

Symmetry properties in polarimetric remote sensing

This paper presents the relations among polarimetric backscattering coefficients from the viewpoint of symmetry groups. Symmetry of geophysical media encountered in remote sensing due to reflection, rotation, azimuthal, and centrical symmetry groups is considered for both reciprocal and nonreciprocal cases. On the basis of the invariance under symmetry transformations in the linear polarization basis, the scattering coefficients are related by a set of equations which restrict the number of independent parameters in the polarimetric covariance matrix. The properties derived under these transformations are general and apply to all scattering mechanisms in a given symmetrical configuration. The scattering coefficients calculated from theoretical models for layer random media and rough surfaces are shown to obey the derived symmetry relations. Use of symmetry properties in remote sensing of structural and environmental responses of scattering media is discussed. As a practical application, the results from this paper provide new methods for the external calibration of polarimetric radars without the deployment of man-made calibration targets.

Nghiem, S. V.↗

Facile fabrication of highly ordered poly(vinylidene fluoride-trifluoroethylene) nanodot arrays for organic ferroelectric memory

Nano-patterned ferroelectric materials have attracted significant attention as the presence of two or more thermodynamically equivalent switchable polarization states can be employed in many applications such as non-volatile memory. In this work, a simple and effective approach for fabrication of highly ordered poly(vinylidene fluoride–trifluoroethylene) P(VDF-TrFE) nanodot arrays is demonstrated. By using a soft polydimethylsiloxane mold, we successfully transferred the 2D array pattern from the initial monolayer of colloidal polystyrene nanospheres to the imprinted P(VDF-TrFE) films via nanoimprinting. The existence of a preferred orientation of the copolymer chain after nanoimprinting was confirmed by Fourier transform infrared spectra. Local polarization switching behavior was measured by piezoresponse force microscopy, and each nanodot showed well-formed hysteresis curve and butterfly loop with a coercive field of ∼62.5 MV/m. To illustrate the potential application of these ordered P(VDF-TrFE) nanodot arrays, the writing and reading process as non-volatile memory was demonstrated at a relatively low voltage. As such, our results offer a facile and promising route to produce arrays of ferroelectric polymer nanodots with improved piezoelectric functionality.

36 MATERIALS SCIENCE↗

Effect of the out-of-plane stress on the properties of epitaxial SrTiO{sub 3} films with nano-pillar array on Si-substrate

A nonlinear thermodynamic formalism has been proposed to calculate the physical properties of the epitaxial SrTiO{sub 3} films containing vertical nano-pillar array on Si-substrate. The out-of-plane stress induced by the mismatch between film and nano-pillars provides an effective way to tune the physical properties of ferroelectric SrTiO{sub 3} films. Tensile out-of-plane stress raises the phase transition temperature and increases the out-of-plane polarization, but decreases the out-of-plane dielectric constant below Curie temperature, pyroelectric coefficient, and piezoelectric coefficient. These results showed that by properly controlling the out-of-plane stress, the out-of-plane stress induced paraelectric-ferroelectric phase transformation will appear near room temperature. Excellent dielectric, pyroelectric, piezoelectric properties of these SrTiO{sub 3} films similar to PZT and other lead-based ferroelectrics can be expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase transition sequence in Pb-free 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93} Sb{sub 0.07}O{sub 3}−0.04BaZrO{sub 3} ceramic with large piezoelectric response

The piezoceramic 0.96(K{sub 0.5}Na{sub 0.5}){sub 0.95}Li{sub 0.05}Nb{sub 0.93}Sb{sub 0.07}O{sub 3}−0.04BaZrO{sub 3} (KNLNS{sub 0.07}-BZ), which shows large piezoelectric response (d{sub 33} ≈ 425 pC/N), has been considered as one of the promising Pb-free substitutions for Pb(Zr,Ti)O{sub 3}. In this paper, we investigate the phase transition sequence for KNLNS{sub 0.07}-BZ by employing the dielectric measurement, mechanical spectroscopy, as well as Raman spectroscopy. Two ferroelectric-ferroelectric transitions have been detected by inspecting anomalies in the spectra, indicating the existence of three ferroelectric phases. Moreover, in-situ X-ray diffraction study has been further performed on KNLNS{sub 0.07}-BZ to identify the crystal structure for each phase. The result reveals that the phase sequence for KNLNS{sub 0.07}-BZ evolves from tetragonal (T) to rhombohedral (R) via an intermediate orthorhombic (O) phase. And the piezoelectric-optimal region for KNLNS{sub 0.07}-BZ locates on a T-O boundary rather than the previously reported T-R boundary. Strong piezoelectricity may stem from the easier polarization rotation on the T-O boundary with reduced polarization anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two- and three-color two-quark states in warm, dense quark matter

We study the Gaussian fluctuations of the two-flavor, meson-diquark bosonized NJL model for two and three colors at the color superconducting phase transition. The analysis is based on analytical properties of the polarization matrix. Pionic fluctuations are shown to be stabilised in the 2SC phase compared to the two-color result where they are right on threshold.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase transitions and the piezoelectricity around morphotropic phase boundary in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} lead-free solid solution

In this paper, two displacive phase transitions around the morphotropic phase boundary (MPB) in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-x(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} (BZT-xBCT) ceramics were detected by inspecting two anomalies of the Raman Ti{sup 4+}-O{sup 2−} longitudinal optical mode (∼725 cm{sup −1}). Further, permittivity and X-ray diffraction results demonstrated these two phase transitions originate from tetragonal (T) to rhombohedral (R) through an intermediate orthorhombic (O) phase. Importantly, we found that the maximum piezoelectric response (d{sub 33} = 545pC/N) was achieved at the boundary between the T and O phase, indicating that the giant piezoelectricity of BZT-xBCT may mainly stem from the T-O phase boundary due to easier polarization rotation and larger lattice softening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong electron emission from antiferroelectric PLZT(2/95/5) films

Strong emission current of 500 mA/cm{sup 2} was observed in sol-gel derived antiferroelectric (AFE) PLZT (2/95/5) thick films at a trigger voltage of 150 V and a dc extraction voltage of 50 V. The PLZT emitters were found to be fatigue-free up to 10{sup 6} emission cycles. Electron emission from our samples is believed to originate from the antiferroelectric-ferroelectric phase transition in the PLZT film emitters. Our results therefore indicate that PLZT could be a promising candidate for flat panel applications because of its higher saturated polarization and fatigue-free properties as compared to its ferroelectric counterparts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dipole ordering and ionic conductivity in NASICON-Type Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} structures

The aspects of structure, dipole ordering, and ionic conductivity of the Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} crystal with the four polymorphic phases (α, α', β, and γ) have been investigated. The features of the α-Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} crystal structure and its dipole ordering and relaxation polarization in the low-temperature α and α' phases have been refined. The occurrence of Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} dipole ordering in the α and α' phases and high ionic conductivity in the β and γ phases is attributed to the structural changes in the rhombohedral [Me{sub 2}(PO{sub 4}){sub 3}]{sup –3}{sub 3∞} crystal frame upon phase transformations α → α', α' → β, and β → γ. A model for explaining the dipole ordering and ionic conductivity phenomena in Na{sub 3}Cr{sub 2}(PO{sub 4}){sub 3} is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controllable light diffraction in woodpile photonic crystals filled with liquid crystal

An approach to switching between different patterns of light beams transmitted through the woodpile photonic crystals filled with liquid crystals is proposed. The phase transition between the nematic and isotropic liquid crystal states leads to an observable variation of the spatial pattern transmitted through the photonic structure. The transmission profiles in the nematic phase also show polarization sensibility due to refractive index dependence on the field polarization. The experimental results are consistent with a numerical calculation by Finite Difference Time Domain method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Piezoelectric and ferroelectric properties of lead-free niobium-rich potassium lithium tantalate niobate single crystals

Graphical abstract: - Highlights: • Lead-free K{sub 0.95}Li{sub 0.05}Ta{sub 1−x}Nb{sub x}O{sub 3} single crystals were grown using the top-seeded melt growth method. • The piezoelectric and ferroelectric properties of as-grown crystals were systematically investigated. • The piezoelectric properties are very attractive, e.g. for x = 0.60 composition, k{sub t} ≈ 70%, k{sub 31} ≈ 70%, k{sub 33} ≈ 77%, d{sub 31} ≈ 230 pC/N, d{sub 33} ≈ 600 pC/N. • The coercive fields of P–E hysteresis loops are quite small, about or less than 1 kV/mm. - Abstract: Lead-free potassium lithium tantalate niobate single crystals with the composition of K{sub 0.95}Li{sub 0.05}Ta{sub 1−x}Nb{sub x}O{sub 3} (abbreviated as KLTN, x = 0.51, 0.60, 0.69, 0.78) were grown using the top-seeded melt growth method. Their piezoelectric and ferroelectric properties in as-grown crystals have been systematically investigated. The phase transitions and Curie temperatures were determined from dielectric and pyroelectric measurements. Piezoelectric coefficients and electromechanical coupling factors in thickness mode, length-extensional mode and longitudinal mode were obtained. The piezoelectric properties are very attractive, e.g. for x = 0.60 composition, k{sub t} ≈ 70%, k{sub 31} ≈ 70%, k{sub 33} ≈ 77%, d{sub 31} ≈ 230 pC/N, d{sub 33} ≈ 600 pC/N are comparable to the lead-based PZT composition. The polarization versus electric field hysteresis loops show saturated shapes. In short, lead-free niobium-rich KLTN system possesses comparable properties to those in important lead-based piezoelectric material nowadays.

36 MATERIALS SCIENCE↗

Enhanced flexoelectricity through residual ferroelectricity in barium strontium titanate

Residual ferroelectricity is observed in barium strontium titanate ceramics over 30 °C above the global phase transition temperature, in the same temperature range in which anomalously large flexoelectric coefficients are reported. The application of a strain gradient leads to strain gradient-induced poling or flexoelectric poling. This was observed by the development of a remanent polarization in flexoelectric measurements, an induced d{sub 33} piezoelectric response even after the strain gradient was removed, and the production of an internal bias of 9 kV m{sup −1}. It is concluded that residual ferroelectric response considerably enhances the observed flexoelectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The investigation of depoling mechanism of densified KNbO{sub 3} piezoelectric ceramic

Thermal depoling phenomena determine the upper temperature limit of the piezoelectric ceramics in application. In this paper, high-densified KNbO{sub 3} ceramics derived from single-crystalline nanostructures exhibited favorable piezoelectric constants d{sub 33}, which varied from 105 to 80 pC/N over a broad temperature range from 25 to 225 deg. C. In situ x-ray diffraction combined with Raman spectra demonstrate clearly the transition sequence of crystallographic orientations during thermal depoling process. The interaction between defect dipoles D and spontaneous polarization inside domains P{sub s} favored to preserve piezoelectric activity, while the spontaneous rotation of P{sub s} induced by the phase transition resulted in the deliquesce of d{sub 33}.

36 MATERIALS SCIENCE↗

Synthesis and characterization of lead-free 0.5Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} ceramic

Polycrystalline sample of lead-free 0.5Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} ceramic has been synthesized by solid state reaction method. Single-phase perovskite structure with rhombohedral symmetry was confirmed by x-ray diffraction. Temperature dependent dielectric permittivity studies demonstrated frequency independent behavior, indicating that the studied sample was not a typical relaxor ferroelectric. A polymorphic phase transition between rhombohedral and tetragonal phase was noticed near room temperature followed by a tetragonal to cubic transition with 97 Degree-Sign C as the temperature of maximum permittivity. The macroscopic values of d{sub 33} and d{sub 31} were {approx}350 pC/N and -141 pm/V, whereas the electromechanical coupling factors k{sub p} and k{sub t} were 44.5% and 41.6%, respectively. Bulk P-E hysteresis loop was obtained with saturation polarization 11 {mu}C/cm{sup 2} and coercive field {approx}4 kV/cm. Distinct polarization contrast with a complex mosaic-like domain structure was observed in the out-of-plane mode of piezoresponse force microscopy. The domain width and the correlation length were estimated to be nearly 2 {mu}m and 827 nm, respectively. Local hysteresis loop with apparent coercive voltage, V{sub c} = 15.8 V, was observed.

36 MATERIALS SCIENCE↗

Sn-modified BaTiO 3 thin film with enhanced polarization

Hybrid molecular beam epitaxy (MBE) growth of Sn-modified BaTiO 3 films was realized with varying domain structures and crystal symmetries across the entire composition space. Macroscopic and microscopic structures and the crystal symmetry of these thin films were determined using a combination of optical second harmonic generation (SHG) polarimetry and scanning transmission electron microscopy (STEM). SHG polarimetry revealed a variation in the global crystal symmetry of the films from tetragonal (P4mm) to cubic (PM3¯m) across the composition range, x = 0 to 1 in BaTi 1–x Sn x O 3 (BTSO). STEM imaging shows that the long-range polar order observed when the Sn content is low (x = 0.09) transformed to a short-range polar order as the Sn content increased (x = 0.48). Consistent with atomic displacement measurements from STEM, the largest polarization was obtained at the lowest Sn content of x = 0.09 in Sn-modified BaTiO 3 as determined by SHG. Furthermore, these results agree with recent bulk ceramic reports and further identify this material system as a potential replacement for Pb-containing relaxor-based thin film devices.

36 MATERIALS SCIENCE↗

Enhanced piezoelectric output voltage and Ohmic behavior in Cr-doped ZnO nanorods

Highlights: • Low cost highly crystalline Cr-doped ZnO nanorods were synthesized. • Enhancement in dielectric, piezoelectric and ferroelectric properties were observed. • A high output voltage was obtained in AFM. • Cr-doping resulted in enhanced conductivity and better Ohmic behavior in ZnO/Ag contact. - Abstract: Highly crystalline Cr-doped ZnO nanorods (NRs) were synthesized by solution technique. The size distribution was analyzed by high resolution tunneling electron microscope (HRTEM) and particle size analyzer. In atomic force microscope (AFM) studies, peak to peak 8 mV output voltage was obtained on the application of constant normal force of 25 nN. It showed high dielectric constant (980) with phase transition at 69 °C. Polarization vs. electric field (P–E) loops with remnant polarization (6.18 μC/cm{sup 2}) and coercive field (0.96 kV/cm) were obtained. In I–V studies, Cr-doping was found to reduce the rectifying behavior in the Ag/ZnO Schottky contact which is useful for field effect transistor (FET) and solar cell applications. With these excellent properties, Cr-doped ZnO NRs can be used in nanopiezoelectronics, charge storage and ferroelectric applications.

36 MATERIALS SCIENCE↗

Polarization rotation associated critical phenomena in epitaxial PbTiO{sub 3} thin films near room temperature

Strain-driven and temperature-driven monoclinic-orthorhombic phase transition in epitaxial PbTiO{sub 3} exhibit similar behavior under electric field, i.e., polarization discontinuity is reduced at the first-order ferroelectric-ferroelectric transition whose latent heat vanishes at a critical point. Due to critical phenomena the energy barrier for polarization rotation significantly diminishes, and hence thermodynamic response functions tend to diverge in the induced monoclinic states. Phenomenological calculations show that dielectric and piezoelectric properties are highly tunable by in-plane strain and electric field, and large electromechanical response may occur in epitaxial PbTiO{sub 3} thin films at room temperature. Phenomenological calculations show that large electrocaloric responsivity can also be expected at room temperature by manipulating the phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of crystal orientation on the phase diagrams, dielectric and piezoelectric properties of epitaxial BaTiO{sub 3} thin films

The influence of crystal orientations on the phase diagrams, dielectric and piezoelectric properties of epitaxial BaTiO{sub 3} thin films has been investigated using an expanded nonlinear thermodynamic theory. The calculations reveal that crystal orientation has significant influence on the phase stability and phase transitions in the misfit strain-temperature phase diagrams. In particular, the (110) orientation leads to a lower symmetry and more complicated phase transition than the (111) orientation in BaTiO{sub 3} films. The increase of compressive strain will dramatically enhance the Curie temperature T{sub C} of (110)-oriented BaTiO{sub 3} films, which matches well with previous experimental data. The polarization components experience a great change across the boundaries of different phases at room temperature in both (110)- and (111)-oriented films, which leads to the huge dielectric and piezoelectric responses. A good agreement is found between the present thermodynamics calculation and previous first-principles calculations. Our work provides an insight into how to use crystal orientation, epitaxial strain and temperature to tune the structure and properties of ferroelectrics.

36 MATERIALS SCIENCE↗