Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIMPLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Simple Formulas and Results for Buckling-Resistance and Stiffness Design of Compression-Loaded Laminated-Composite Cylinders

Simple formulas for the buckling stress of homogeneous, specially orthotropic, laminated-composite cylinders are presented. The formulas are obtained by using nondimensional parameters and equations that facilitate general validation, and are validated against the exact solution for a wide range of cylinder geometries and laminate constructions. Results are presented that establish the ranges of the nondimensional parameters and coefficients used. General results, given in terms of the nondimensional parameters, are presented that encompass a wide range of geometries and laminate constructions. These general results also illustrate a wide spectrum of behavioral trends. Design-oriented results are also presented that provide a simple, clear indication of laminate composition on critical stress, critical strain, and axial stiffness. An example is provided to demonstrate the application of these results to thin-walled column designs.

Nemeth, Michael P.↗
NASA NTRS2010

Simple Check Valves for Microfluidic Devices

A simple design concept for check valves has been adopted for microfluidic devices that consist mostly of (1) deformable fluorocarbon polymer membranes sandwiched between (2) borosilicate float glass wafers into which channels, valve seats, and holes have been etched. The first microfluidic devices in which these check valves are intended to be used are micro-capillary electrophoresis (microCE) devices undergoing development for use on Mars in detecting compounds indicative of life. In this application, it will be necessary to store some liquid samples in reservoirs in the devices for subsequent laboratory analysis, and check valves are needed to prevent cross-contamination of the samples. The simple check-valve design concept is also applicable to other microfluidic devices and to fluidic devices in general. These check valves are simplified microscopic versions of conventional rubber- flap check valves that are parts of numerous industrial and consumer products. These check valves are fabricated, not as separate components, but as integral parts of microfluidic devices. A check valve according to this concept consists of suitably shaped portions of a deformable membrane and the two glass wafers between which the membrane is sandwiched (see figure). The valve flap is formed by making an approximately semicircular cut in the membrane. The flap is centered over a hole in the lower glass wafer, through which hole the liquid in question is intended to flow upward into a wider hole, channel, or reservoir in the upper glass wafer. The radius of the cut exceeds the radius of the hole by an amount large enough to prevent settling of the flap into the hole. As in a conventional rubber-flap check valve, back pressure in the liquid pushes the flap against the valve seat (in this case, the valve seat is the adjacent surface of the lower glass wafer), thereby forming a seal that prevents backflow.

Willis, Peter A.↗
NASA NTRS2011

A Simple, Analytical Model of Collisionless Magnetic Reconnection in a Pair Plasma

A set of conservation equations is utilized to derive balance equations in the reconnection diffusion region of a symmetric pair plasma. The reconnection electric field is assumed to have the function to maintain the current density in the diffusion region, and to impart thermal energy to the plasma by means of quasi-viscous dissipation. Using these assumptions it is possible to derive a simple set of equations for diffusion region parameters in dependence on inflow conditions and on plasma compressibility. These equations are solved by means of a simple, iterative, procedure. The solutions show expected features such as dominance of enthalpy flux in the reconnection outflow, as well as combination of adiabatic and quasi-viscous heating. Furthermore, the model predicts a maximum reconnection electric field of E(sup *)=0.4, normalized to the parameters at the inflow edge of the diffusion region.

Hesse, Michael↗
NASA NTRS2012

Performance of Simple Gas Foil Thrust Bearings in Air

Foil bearings are self-acting hydrodynamics devices used to support high speed rotating machinery. The advantages that they offer to process fluid lubricated machines include: high rotational speed capability, no auxiliary lubrication system, non-contacting high speed operation, and improved damping as compared to rigid hydrodynamic bearings. NASA has had a sporadic research program in this technology for almost 6 decades. Advances in the technology and understanding of foil journal bearings have enabled several new commercial products in recent years. These products include oil-free turbochargers for both heavy trucks and automobiles, high speed electric motors, microturbines for distributed power generation, and turbojet engines. However, the foil thrust bearing has not received a complimentary level of research and therefore has become the weak link of oil-free turbomachinery. In an effort to both provide machine designers with basic performance parameters and to elucidate the underlying physics of foil thrust bearings, NASA Glenn Research Center has completed an effort to experimentally measure the performance of simple gas foil thrust bearing in air. The database includes simple bump foil supported thrust bearings with full geometry and manufacturing techniques available to the user. Test conditions consist of air at ambient pressure and temperatures up to 500 C and rotational speeds to 55,000 rpm. A complete set of axial load, frictional torque, and rotational speed is presented for two different compliant sub-structures and inter-pad gaps. Data obtained from commercially available foil thrust bearings both with and without active cooling is presented for comparison. A significant observation made possible by this data set is the speed-load capacity characteristic of foil thrust bearings. Whereas for the foil journal bearing the load capacity increases linearly with rotational speed, the foil thrust bearing operates in the hydrodynamic high speed limit. In this case, the load capacity is constant and in fact often decreases with speed if other factors such as thermal conditions and runner distortions are permitted to dominate the bearing performance.

Bruckner, Robert J.↗
NASA NTRS2012

Creating Simple Admin Tools Using Info*Engine and Java

PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create a simple Info*Engine Tasks capable of saving Windchill 10.0 administration of tedious work.

Jones, Corey↗
NASA NTRS2013

Lunar Simple Crater Impact Melt Volumes

Impact melt is observed in simple lunar craters having diameters as small as less than 200 m. The presence of ponds of impact melt on the floor of such small craters is interpreted to indicate vertical impacts. Data from the LRO LROC and LOLA experiments allow quantitative estimates of the volume of impact melt in simple crater. Such estimates allow for validation of theoretical models of impact melt generation and examination of target effects. Preliminary data have considerable scatter but are broadly consistent with the models.

Plescia, Jeffrey B.↗
NASA NTRS2013

Inferring Soil Moisture Memory from Streamflow Observations Using a Simple Water Balance Model

Soil moisture is known for its integrative behavior and resulting memory characteristics. Soil moisture anomalies can persist for weeks or even months into the future, making initial soil moisture a potentially important contributor to skill in weather forecasting. A major difficulty when investigating soil moisture and its memory using observations is the sparse availability of long-term measurements and their limited spatial representativeness. In contrast, there is an abundance of long-term streamflow measurements for catchments of various sizes across the world. We investigate in this study whether such streamflow measurements can be used to infer and characterize soil moisture memory in respective catchments. Our approach uses a simple water balance model in which evapotranspiration and runoff ratios are expressed as simple functions of soil moisture; optimized functions for the model are determined using streamflow observations, and the optimized model in turn provides information on soil moisture memory on the catchment scale. The validity of the approach is demonstrated with data from three heavily monitored catchments. The approach is then applied to streamflow data in several small catchments across Switzerland to obtain a spatially distributed description of soil moisture memory and to show how memory varies, for example, with altitude and topography.

Soil Moisture↗
NASA NTRS2013

A Simple GPU-Accelerated Two-Dimensional MUSCL-Hancock Solver for Ideal Magnetohydrodynamics

We describe our experience using NVIDIA's CUDA (Compute Unified Device Architecture) C programming environment to implement a two-dimensional second-order MUSCL-Hancock ideal magnetohydrodynamics (MHD) solver on a GTX 480 Graphics Processing Unit (GPU). Taking a simple approach in which the MHD variables are stored exclusively in the global memory of the GTX 480 and accessed in a cache-friendly manner (without further optimizing memory access by, for example, staging data in the GPU's faster shared memory), we achieved a maximum speed-up of approx. = 126 for a sq 1024 grid relative to the sequential C code running on a single Intel Nehalem (2.8 GHz) core. This speedup is consistent with simple estimates based on the known floating point performance, memory throughput and parallel processing capacity of the GTX 480.

graphics processing units↗
NASA NTRS2005

Robust and Simple Non-Reflecting Boundary Conditions for the Euler Equations - A New Approach based on the Space-Time CE/SE Method

This paper reports on a significant advance in the area of nonreflecting boundary conditions (NRBCs) for unsteady flow computations. As a part of t he development of t he space-time conservation element and solution element (CE/SE) method, sets of NRBCs for 1D Euler problems are developed without using any characteristics- based techniques. These conditions are much simpler than those commonly reported in the literature, yet so robust that they are applicable to subsonic, transonic and supersonic flows even in the presence of discontinuities. In addition, the straightforward multidimensional extensions of the present 1D NRBCs have been shown numerically to be equally simple and robust. The paper details the theoretical underpinning of these NRBCs, and explains t heir unique robustness and accuracy in terms of t he conservation of space-time fluxes. Some numerical results for an extended Sod's shock-tube problem, illustrating the effectiveness of the present NRBCs are included, together with an associated simple Fortran computer program. As a preliminary to the present development, a review of the basic CE/SE schemes is also included.

Chang, S.-C.↗
NASA NTRS2018

Simple Ion Channels: From Structure to Electrophysiology and Back

A reliable way to establish whether our understanding of a channel is satisfactory is to reproduce its measured ionic conductance over a broad range of applied voltages in computer simulations. In molecular dynamics (MD), this can be done by way of applying an external electric field to the system and counting the number of ions that traverse the channel per unit time. Since this approach is computationally very expensive, we have developed a markedly more efficient alternative in which MD is combined with the electrodiffusion (ED) equation. In this approach, the assumptions of the ED equation can be rigorously tested, and the precision and consistency of the calculated conductance can be determined. We have demonstrated that the full current/voltage dependence and the underlying free energy profile for a simple channel can be reliably calculated from equilibrium or non-equilibrium MD simulations at a single voltage. To carry out MD simulations, a structural model of a channel has to be assumed, which is an important constraint, considering that high-resolution structures are available for only very few simple channels. If the comparison of calculated ionic conductance with electrophysiological data is satisfactory, it greatly increases our confidence that the structure and the function are described sufficiently accurately. We examined the validity of the ED for several channels embedded in phospholipid membranes - four naturally occurring channels: trichotoxin, alamethicin, p7 from hepatitis C virus (HCV) and Vpu from the HIV-1 virus, and a synthetic, hexameric channel, formed by a 21-residue peptide that contains only leucine and serine. All these channels mediate transport of potassium and chloride ions. It was found that the ED equation is satisfactory for these systems. In some of them experimental and calculated electrophysiological properties are in good agreement, whereas in others there are strong indications that the structural models are incorrect.

molecular dynamics (MD↗
NASA NTRS2017

Simple Analytical Expressions for Electron Pitch Angle Diffusion Coefficients

In the present paper, we have calculated electron pitch angle diffusion coefficients due to resonant interactions with whistler mode lower band chorus (LBC), upper band chorus (UBC), and electrostatic electron cyclotron harmonic (ECH) waves. Calculations have been performed at two values of the ratio of electron plasma frequency to gyro-frequency and thirteen representative values of electron energies for the plasma sheet electrons. The numerical data of diffusion coefficients have been fitted to simple analytical expressions for each wave mode. These analytical expressions allow for simple evaluation of pitch angle diffusion coefficients for the arbitrary pitch angle, energy, the ambient magnetic field, the wave amplitude, and the ratio of plasma frequency to gyro-frequency. In the case of LBC waves, the analytical coefficients are generally within a factor of two to the numerical coefficients, except at higher pitch angles where the numerical coefficients drop to show negligible values. Likewise, also for UBC waves, the analytical coefficients are generally within a factor of two to the numerical coefficients. The analytical coefficients for ECH waves are generally in agreement with numerical coefficients. However, the analytical expressions developed for ECH waves do not reproduce sharp fluctuations, dips, and gaps, the so-called banded structure observed in the data of numerical coefficients. The effect of the shape variation on the profile of the wave spectral intensity and the effect of cold temperature on the numerical coefficients are also investigated. Applications of the analytical expressions of diffusion coefficients are discussed.

coefficients↗
NASA NTRS2018

A Simple Thermoelectric Droplet Generator

A new design for a droplet generator capable of producing single droplets is presented. The design relies on thermoelectric heating to vaporize water at the interface between a droplet and a blunt syringe tip. While other designs require careful tuning to produce drops of varying size, this technique enables the simple creation of droplets of any size within a range. The design is of simple construction and can be completed with off-the-shelf components, and relies on resistive heating to vaporize water at or near the droplet-nozzle interface and release the droplets. We demonstrated that the design can be used to produce droplets as small as 110 µm or as large as 2 mm. Drop size is limited by the geometry of the nozzle since water must wet the tip of the nozzle and hang under gravity. Our experiments showed that released droplets have relatively small disturbances introduced by the release mechanism when compared to competing techniques. These disturbances were intermittently observed as the voltage, pulse width, and drop size were changed, and optimal settings were determined for the smallest drop sizes produced.

Andrew Work↗
NASA NTRS1993

Classification of Simple Vegetation Types Using POLSAR Image Data

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to a simple classifier for vegetation type.

Freeman, A.↗
NASA NTRSDate not supplied

Pathfinder Networks for Measuring Operator Mental Model Structure with a Simple Autopilot System

Pathfinder networks are a method to represent mental models from empirically generated pairwise relatedness ratings. This study examined the effects of training exposure on mental model structures based on relatedness ratings collected using the Target Rating method. Forty-eight participants read instruction slides with or without explicit information on the functionality of an autopilot system (Advanced Mental Model or Basic Mental Model groups, respectively). Participants provided relatedness ratings and completed a comprehension test. The Advanced Mental Model group had more common links with the expected model, higher within-group network similarity scores, and higher mental model assessment questionnaire scores than the Basic Mental Model group. Both groups had coherence scores above the minimum threshold for internal consistency. Pathfinder network analysis was sensitive to changes produced by a simple exposure training intervention. In practice, a simple training program may effectively influence operator mental models in novel technological environments such as Advanced Air Mobility.

Mental Models↗
NASA NTRSDate not supplied

AMMPER: a user-friendly agent-based model that recapitulates simple metabolic responses of yeast to deep-space radiation

For humans venturing to deep space, radiation exposure poses a major health risk. Fundamental research into the biological effects of space radiation are essential for enabling exploration, and the first experimental organisms we send to deep space will be microbial. Yet there are many ways in which microorganisms are likely to experience the effects of high-energy particle radiation (such as Galactic Cosmic Rays) differently from multicellular animals, partly due to the simple fact that microbes are small and unicellular-- less likely to get hit in the first place, and less likely to communicate damage between cells. Computational modeling can aid in designing experiments and predicting the biological effects of radiation, but thus far particle radiation models have not focused on microbes. Here we present the latest developments in AMMPER, the Agent-based Model for Microbial Populations Exposed to Radiation. Originally written in 2021, AMMPER is a Python-based model that incorporates radiation track data from NASA's RITRACKS software and simulates the growth, damage, and death of yeast cells in 3D. It is now freely available as an open-source package on NASA's GitHub repository. Recent improvements include the ability to simulate the dynamics of alamarBlue, a color-changing redox dye commonly used to track metabolic activity in microbial spaceflight experiments. We demonstrate that a simple blue-pink-clear transition model is able to recapitulate key features observed in empirical data from ground studies. AMMPER also includes a new graphical user interface and introductory tutorial to facilitate ease of use by a wider audience. AMMPER can help us to understand how spatially heterogeneous particle radiation damage at the single-cell level can translate to growth differences at the population level, ultimately allowing us to better interpret experiments using microbes as model organisms and how well their results apply to humans.

yeast↗
DOE OSTI2022

Initial ASME code rule analysis on Simple and Full assessment

ASME & ASTM codes present simple and full assessment methodologies to qualify nuclear grade graphite components. This report explains the theory behind the statistical portion of the codes and describes the issues discussed in a 2020 workshop in the simple assessment, as well as the full assessment. The methodology for the full assessment was developed by Hindley []. He used a validation methodology to match the experimental average failure load of test specimens from several geometries to the calculated 50% POF load to tune the grouping criteria parameters based on an RMSE penalty function. The grouping criteria consists of a minimum volume to satisfy the weakest link theory of the Weibull distribution and a minimum stress range parameter. Hindley’s work found a minimum link volume of 10 times the grain size and a stress range parameter of 7% [satisfy the validation requirements. Several studies found that the link volume of 10 times the grain size was not satisfactory for the volume grouping criteria for graphite grades with fine grains. ASME 2021 code adopted a new volume grouping criteria based on fracture toughness for calculation of the process zone volume. However, errors were found in the ASME 2021 code process zone volume equation and the question is now open as to what volume grouping criteria is satisfactory. This report presents results from sensitivity studies that were done to evaluate the volume grouping criteria effect on the full assessment POF. This report also presents results from sensitivity studies on other aspects of the code that affect the POF, the mesh size and the choice of the Weibull threshold parameter. All three sensitivity studies: the volume grouping criteria, the mesh size, and the threshold parameter choice are found to affect the component qualification decision for components of structural reliability class 1 (SRC-1). The sensitivity analysis results are presented in the body of the report for NBG-18, which is the same grade of graphite as Hindley used in his thesis. Results from NBG-17, IG-110, 2114, and PCEA are presented in the Appendix. For NBG-18, it was found that increasing the threshold increases the POF, finer meshes result in higher POFs, and that smaller link volume requirements lead to higher POFs (which is inconsistent with Hindley’s findings). This report proposes a new validation study similar to Hindley’s []. The purpose of the new validation study is to tune the threshold, mesh size and grouping criteria based on results from multiple grades of graphite, including finer grain graphites T220 (1-3 microns) and NG-CT-50 (5 microns). The test specimens will be broken at 3 labs, such that we can measure between lab measurement variability, with at least 5 test specimens per lab such that the within lab uncertainty can also be measured. Hindley’s validation method tried matching the average experimental load with the median. The future study will attempt to match failures at lower percentiles, which would be closer to the SRC POF limit. We are currently looking into what geometries make sense and the best method to measure multi-axial stress states. These design decisions are still being set.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simple and Robust Carrier-Based PWM Technique for Single-Stage Three-phase Rectifier Indirect Matrix Converter

Indirect matrix converters (IMC) can offer high efficiency, high power density, and bidirectional power flow capability with a single-stage three-to single-phase AC-AC power conversion integrating a conventional three-phase active rectifier with a primary side full-bridge inverter of a dual active bridge converter. However, the IMCs generally require space vector modulation techniques, leading to complex sectors and dwell times calculations. A practical implementation of the modulation methods with a commonly used digital signal processor becomes even more challenging when considering power factor correction, harmonics reduction, and deadtime between sector transitions. This paper proposes a simple and robust carrier-based pulse width modulation (PWM) technique determined through a voltage-source inverter (VSI) to current-source inverter (CSI) to IMC conversion. This translation enables the adoption of all conventional VSI control methods with active and reactive power control in the IMCs through simple carrier and reference waveform comparison. The VSI vectors are first one-on-one matched with CSI vectors and translated to IMC modulation signals without calculating sectors and dwell times. Nine different carrier waveforms are proposed, and the converter performance is analyzed. Grid current THD and efficiency are estimated for each modulation method. The symmetric A and B methods had the lowest THD of the grid current, 2.80%, and the efficiency remained at approximately 98.3%, making it the most suitable carrier-based method proposed in this paper. The space vector PWM (SVPWM) modulation method was implemented to the DSP and generated the expected twelve gate signals.

Benson, Mikayla↗
DOE OSTI2023

A simple-structured benzo[1,2-b:4,5-b’]dithiophene-based molecule as a third component enables organic solar cells with over 18.2% efficiency

In this study, research has shown that ternary strategy is an effective tool for improving the performance of organic solar cells (OSCs) and simple-structured small molecules with low-cost and wide bandgap which broadens the scope of the choice in third components recently attracted the attention of researchers. Herein, a small molecule with benzo[1,2-b:4,5-b’]dithiophene (BDT) core named BR-C12 which mixed well with PM6 has been designed and synthesized. Incorporating BR-C12 as third component into PM6:Y6, BR-C12 exhibits a complementary absorption with PM6 and Y6, promoted exciton dissociation and charge collection, reduced bimolecular recombination, resulting in more ordered molecular packing. The PM6:Y6:BR-C12 (1:1.2:0.1, weight ratio) OSC shows an improved power conversion efficiency (PCE) of 17.02% in comparison to host binary devises (16.42%). In addition, by employing BR-C12 as third component into PM6:L8-BO, the ternary device based on PM6:L8-BO:BR-C12 also achieves significant enhancement in device photovoltaic performance with a PCE of 18.26%. In addition, BR-C12-added ternary devices exhibit improved stability than binary ones. This work presents a method for constructing high-performance ternary OSCs and enriches the abundance of materials for the third components.

14 SOLAR ENERGY↗