Search NASA⌕ Search

SEARCH · Search NASA

Results for “Standard model tests”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Atmospheric model for correction of spacecraft data.

Description of a radiative transfer model which has been used to correct Apollo photographic imagery for degradation arising from atmospheric scattering. The model was tested using aircraft scanner data, and an extrapolation was then made to spacecraft altitudes. Using standard meteorological data for the region of interest, it is possible to determine transmittance, path radiance, and total radiance from calculations made with the multiple scattering atmospheric model. Simple algorithms are presented which allow potential users of spacecraft sensor data to correct imagery for the deleterious effects due to the scattering of radiation under clear or hazy atmospheric conditions.

Turner, R. E.↗
NASA NTRS2018

Comparing Free-Free and Shaker Table Model Correlation Methods Using Jim Beam

Finite element model correlation as part of a spacecraft program has always been a challenge. For any NASA mission, the coupled system response of the spacecraft and launch vehicle can be determined analytically through a Coupled Loads Analysis (CLA), as it is not possible to test the spacecraft and launch vehicle coupled system before launch. The value of the CLA is highly dependent on the accuracy of the frequencies and mode shapes extracted from the spacecraft model. NASA standards require the spacecraft model used in the final Verification Loads Cycle to be correlated by either a modal test or by comparison of the model with Frequency Response Functions (FRFs) obtained during the environmental qualification test. Due to budgetary and time constraints, most programs opt to correlate the spacecraft dynamic model during the environmental qualification test, conducted on a large shaker table. For any model correlation effort, the key has always been finding a proper definition of the boundary conditions. This paper is a correlation case study to investigate the difference in responses of a simple structure using a free-free boundary, a fixed boundary on the shaker table, and a base-drive vibration test, all using identical instrumentation. The NAVCON Jim Beam test structure, featured in the IMAC round robin modal test of 2009, was selected as a simple, well recognized and well characterized structure to conduct this investigation. First, a free-free impact modal test of the Jim Beam was done as an experimental control. Second, the Jim Beam was mounted to a large 20,000 lbf shaker, and an impact modal test in this fixed configuration was conducted. Lastly, a vibration test of the Jim Beam was conducted on the shaker table. The free-free impact test, the fixed impact test, and the base-drive test were used to assess the effect of the shaker modes, evaluate the validity of fixed-base modeling assumptions, and compare final model correlation results between these boundary conditions.

Modal Test↗
NASA NTRS2011

Turbulence Modeling for Shock Wave/Turbulent Boundary Layer Interactions

Accurate aerodynamic computational predictions are essential for the safety of space vehicles, but these computations are of limited accuracy when large pressure gradients are present in the flow. The goal of the current project is to improve the state of compressible turbulence modeling for high speed flows with shock wave / turbulent boundary layer interactions (SWTBLI). Emphasis will be placed on models that can accurately predict the separated region caused by the SWTBLI. These flows are classified as nonequilibrium boundary layers because of the very large and variable adverse pressure gradients caused by the shock waves. The lag model was designed to model these nonequilibrium flows by incorporating history effects. Standard one- and two-equation models (Spalart Allmaras and SST) and the lag model will be run and compared to a new lag model. This new model, the Reynolds stress tensor lag model (lagRST), will be assessed against multiple wind tunnel tests and correlations. The basis of the lag and lagRST models are to preserve the accuracy of the standard turbulence models in equilibrium turbulence, when the Reynolds stresses are linearly related to the mean strain rates, but create a lag between mean strain rate effects and turbulence when nonequilibrium effects become important, such as in large pressure gradients. The affect this lag has on the results for SWBLI and massively separated flows will be determined. These computations will be done with a modified version of the OVERFLOW code. This code solves the RANS equations on overset grids. It was used for this study for its ability to input very complex geometries into the flow solver, such as the Space Shuttle in the full stack configuration. The model was successfully implemented within two versions of the OVERFLOW code. Results show a substantial improvement over the baseline models for transonic separated flows. The results are mixed for the SWBLI assessed. Separation predictions are not as good as the baseline models, but the over prediction of the peak heat flux downstream of the reattachment shock that plagues many models is reduced.

Lillard, Randolph P.↗
NASA NTRSDate not supplied

Requirements and Challenges for CFD Validation within the High-Lift Common Research Model Ecosystem

The High-Lift Common Research Model (CRM-HL) ecosystem is envisioned to become an industry standard set of test cases for high-lift aerodynamics prediction, with data generated providing a strong foundation for CFD validation. Since its original development, preliminary wind tunnel tests have been conducted to further understand and configure the geometry, and several more are in the planning phases. It is anticipated that the data generated in these tests will be used extensively by the CFD community for research, development, and validation of new techniques that yield more accurate results. To derive the maximum benefit from planned wind tunnel testing, data acquisition will be focused in several key areas to address specific shortcomings in CFD predictive capabilities. Significant challenges currently exist in areas including, but not limited to, characterizing high-lift flow phenomena, quantifying effects due to configuration changes, understanding wind tunnel and model installation effects, and establishing data uncertainty. This paper will discuss the current state-of-the-art in high-lift CFD prediction, key limitations of current CFD methods and tools, establishing a validation dialog between test and CFD practitioners, and the flow phenomena of highest interest, in an effort to begin to address these challenges. To this end, it is expected that the data generated from CRM-HL tests will form a strong foundation for future predictive capability.

Adam M Clark↗
NASA NTRS1985

A continuous damage model based on stepwise-stress creep rupture tests

A creep damage accumulation model is presented that makes use of the Kachanov damage rate concept with a provision accounting for damage that results from a variable stress history. This is accomplished through the introduction of an additional term in the Kachanov rate equation that is linear in the stress rate. Specification of the material functions and parameters in the model requires two types of constituting a data base: (1) standard constant-stress creep rupture tests, and (2) a sequence of two-step creep rupture tests.

Robinson, D. N.↗
NASA NTRS1979

Stellar luminosity stability - Luminosity variations and light curve period changes in BY Draconis stars

The implications for convection in late type stars arising from the observations of BY Draconis type variability are examined. The possibility that the total luminosity of such a star is not constant is emphasized, and further observational tests to better define the variability are suggested. An alternative to standard spot models is explored in which the 'missing' flux from 'dark' spots is temporally redistributed; this model makes definite predictions about the correlation of mean light and color, and about the quiescent (i.e., unspotted) magnitudes of BY Draconis stars. The time scales of the long-period variability of these stars appear to require secular changes in convective energy transport. Consideration is given to the evidence for period changes in the optical light curves, and it is concluded that the reality of such changes is far less certain than previously claimed.

Hartmann, L.↗
NASA NTRSDate not supplied

Solar White Thermal Coating for Cryogenic Propulsion Systems

NASA is currently conducting research into the potential of storing cryogenic fluid in low Earth orbit (LEO). Having cryogenic propellant readily available for high-performance propulsion systems can be very beneficial for deep space missions in the near future. One of the key challenges to storing cryogenic fluid in LEO is minimizing boil-off. To address the challenge, NASA is evaluating new concepts in thermal insulation. One recent experimental study evaluated the feasibility of using Yttrium Oxide (Y2O3), formed into tiles or spray coating that can potentially be used as a thermal coating for cryogenic propellant storage applications in deep space. Due to its temperature and wavelength dependent optical properties, this “solar white” material can reflect a vast majority of the Sun’s radiative energy while having a very high infrared emissivity for rejecting heat to deep space. As a part of the material development and proof of concept testing, multiple tests have been run at KSC and GRC to demonstrate the performance of the material. At GRC, the tests were run using the Deep Space Solar Simulator (DS3) which contains a thermal vacuum chamber in which the solar white sample was exposed to a deep space environment (< 10 K, optically dense walls) while under full illumination via solar lamp. In order to improve the use of the test results and apply them to spacecraft, there is a need to be able to model the material properties within NASA’s standard thermal modeling tools. As such, it was set out to verify a thermal model of one of the experiments using Thermal Desktop with Sinda. The thermal model of the DS3 test setup includes the solar white sample along with a solar lamp simulator capable of outputting heat at varying wavelengths. The model was developed in order to validate the test results and also to help predict results that will be obtained in future tests. This paper will review the modeling methods and thermal analysis results for various test cases that were run within the DS3 facility.

Cryogenic↗
NASA NTRSDate not supplied

High-Fidelity CFD Verification Workshop 2024 Summary: Spalart-Allmaras QCR2000-R Turbulence Model

This paper summarizes solutions submitted for the Reynolds-averaged Navier-Stokes (RANS) test suite of the High-Fidelity CFD Verification Workshop. The goal of the workshop is to establish standards for verification of computational fluid dynamics (CFD) approaches to simulations of steady and unsteady turbulent flows. The RANS verification studies focus on a one-equation Spalart-Allmaras model with quadratic constitutive relation and rotation correction, SA-neg-QCR2000-R. The verification test cases are a two-dimensional subsonic flow around a Joukowski airfoil, a three-dimensional subsonic flow around an extruded NACA 0012 wing in a tunnel, and a subsonic flow around a wing-body configuration developed for verification of solvers participating in the 5 𝑡 ℎ High-Lift Prediction Workshop. The turbulencemodel formulation, geometry, flow conditions, grids, and reference solutions are described in detail. Solutions for the test cases are computed by seven established CFD solvers on adaptedand fixed-grid families using different discretization approaches. While some noticeable differences between solutions remain, the results achieved by contributing solvers show that different solutions computed for the same RANS model on different grid families can converge to a common limit with grid refinement. The apparent requirements for grid convergence are a well designed family of grids that provide sufficient resolution in important areas and a strong solver capable of deep iterative convergence on each grid. For each test case in the study, the variation between aerodynamic forces computed by different solvers on the finest grids of different families is less than 2%.

Boris Diskin↗
NASA NTRS1997

Inlet Shape Effects on the Far-Field Sound of a Model Fan

A wind tunnel test was conducted to determine the effects of inlet shape on fan radiated noise. Four inlet geometries, which included a long standard flight type inlet, a short, aggressive flight inlet a scarf inlet, and an elliptical inlet were investigated in the study. The fan model used in the study was a 0.1 scale of the Pratt and Whitney Advanced Ducted Propeller (ADP), an ultra high bypass ratio turbofan engine. Acoustic data are presented for a fan speed of 70% (12,000 rpm) and a tunnel speed of 0.10 Mach number, The fan was configured with a 16-bladed rotor and a 40 stator vane set that were separated by 2.0 chord lengths. The radiated noise was measured with 15 microphones on a boom that traversed the length of the tunnel test section. Data from these microphones are presented in the form of sideline angle directivity plots. Noise associated with the test inlets was also predicted using a ray acoustics code. Inlet shape has been found to have a significant effect on both tone and broadband noise, and the non-axisymmetric inlet shape can be used for a noise reduction method.

Clark, L. R.↗
NASA NTRSDate not supplied

An Approach to Shape Parameterization Using Laboratory Hypervelocity Impact Experiments

NASA’s Orbital Debris Program Office relies on laboratory-based impact tests to supplement the measurement data of on-orbit events that defines the orbital debris environment. These experiments provide information that is essential to interpreting the radar and optical measurements of orbital fragmentation events into useful metrics, such as characteristic size of the debris, and to providing a better understanding of the distributions of fragment populations in terms of their masses, material constituents, fragment densities, cross-sectional areas, area-to-mass ratios, shapes, etc. The Satellite Orbital Debris Characterization Impact Test (SOCIT) was a notable laboratory impact experiment conducted in 1992 using a surplus U.S. Navy Transit navigation satellite of the 1960s. The data from this ground-based experiment were combined with on-orbit measurements to develop the NASA Standard Satellite Breakup Model (SSBM). To account for advancements in satellite design and construction since, a new impact test series – DebriSat – was conducted in 2014. This test utilized a high-fidelity mock-up spacecraft that better represents the materials and construction techniques used to design and manufacture modern spacecraft. Together, these tests offer valuable data to model an orbital debris environment composed of legacy and modern spacecraft. This paper presents an overview of the two laboratory impact tests, comparing their fragment parameter distributions with each other and with relevant distributions from the NASA SSBM. The categorization and descriptions of fragment shapes are of significant interest for future work, yet there are marked differences in the definitions of shape categories between each dataset. The categorizations of constituent materials, and the measurement techniques employed to populate these two datasets, are also different. New rubrics simplify and equate the categorizations between datasets to aid comparative analyses and to facilitate the potential use of both datasets in tandem with future environmental debris models. A preferred approach to classifying shape across disparate datasets uses the characteristic-length dimensions, and a simplified shape classification based on physical, solid-body dimensions, to mathematically construct an encapsulating right-circular cylinder that represents the fragment. The ratio of cylinder length-to-diameter (L:D) then provides a single continuum value for shape that is strongly correlated with its designated shape and size. This metric can then be used to further assess the distribution of shape with populations of other fragment characteristics within these datasets. The shape parameterization using the L:D ratios of right-circular cylinders is discussed.

John H. Seago↗
NASA NTRSDate not supplied

An Approach to Shape Parameterization Using Laboratory Hypervelocity Impact Experiments

NASA’s Orbital Debris Program Office relies on laboratory-based impact tests to supplement the measurement data of on-orbit events that defines the orbital debris environment. These experiments provide information that is essential to interpreting the radar and optical measurements of orbital fragmentation events into useful metrics, such as characteristic size of the debris, and to providing a better understanding of the distributions of fragment populations in terms of their masses, material constituents, fragment densities, cross-sectional areas, area-to-mass ratios, shapes, etc. The Satellite Orbital Debris Characterization Impact Test (SOCIT) was a notable laboratory impact experiment conducted in 1992 using a surplus U.S. Navy Transit navigation satellite of the 1960s. The data from this ground-based experiment were combined with on-orbit measurements to develop the NASA Standard Satellite Breakup Model (SSBM). To account for advancements in satellite design and construction since, a new impact test series – DebriSat – was conducted in 2014. This test utilized a high-fidelity mock-up spacecraft that better represents the materials and construction techniques used to design and manufacture modern spacecraft. Together, these tests offer valuable data to model an orbital debris environment composed of legacy and modern spacecraft. This paper presents an overview of the two laboratory impact tests, comparing their fragment parameter distributions with each other and with relevant distributions from the NASA SSBM. The categorization and descriptions of fragment shapes are of significant interest for future work, yet there are marked differences in the definitions of shape categories between each dataset. The categorizations of constituent materials, and the measurement techniques employed to populate these two datasets, are also different. New rubrics simplify and equate the categorizations between datasets to aid comparative analyses and to facilitate the potential use of both datasets in tandem with future environmental debris models. A preferred approach to classifying shape across disparate datasets uses the characteristic-length dimensions, and a simplified shape classification based on physical, solid-body dimensions, to mathematically construct an encapsulating right-circular cylinder that represents the fragment. The ratio of cylinder length-to-diameter (L:D) then provides a single continuum value for shape that is strongly correlated with its designated shape and size. This metric can then be used to further assess the distribution of shape with populations of other fragment characteristics within these datasets. The shape parameterization using the L:D ratios of right-circular cylinders is discussed.

John H Seago↗
NASA NTRS1984

A preliminary analysis of flight data from the AFTI/F-16 airplane

Flight test data from the AFTI/F-16 airplane are analyzed. Two flight control system modes (Independent Backup Unit and Standard Normal Mode) are considered. Estimated stability and control derivatives are compared with values from the wind tunnel and F-16A flight tests. Modeling difficulties are shown to arise due to the near-neutral static stability of the airplane and the number of coordinated control surface movements commanded in the Standard Normal Mode.

Batterson, J. G.↗
NASA NTRS2016

Monochromatic Measurements of the JPSS-1 VIIRS Polarization Sensitivity

Polarization sensitivity is a critical property that must be characterized for spaceborne remote sensing instruments designed to measure reflected solar radiation. Broadband testing of the first Joint Polar-orbiting Satellite System (JPSS-1) Visible Infrared Imaging Radiometer Suite (VIIRS) showed unexpectedly large polarization sensitivities for the bluest bands on VIIRS (centered between 400 and 600 nm). Subsequent ray trace modeling indicated that large diattenuation on the edges of the bandpass for these spectral bands was the driver behind these large sensitivities. Additional testing using the National Institute of Standards and Technologies Traveling Spectral Irradiance and Radiance Responsivity Calibrations Using Uniform Sources was added to the test program to verify and enhance the model. The testing was limited in scope to two spectral bands at two scan angles; nonetheless, this additional testing provided valuable insight into the polarization sensitivity. Analysis has shown that the derived diattenuation agreed with the broadband measurements to within an absolute difference of about0.4 and that the ray trace model reproduced the general features of the measured data. Additionally, by deriving the spectral responsivity, the linear diattenuation is shown to be explicitly dependent on the changes in bandwidth with polarization state.

Monochromatic↗
NASA NTRS2010

Testing Cosmic Inflation

The Cosmic Microwave Background (CMB) has provided a wealth of information about the history and physics of the early Universe. Much progress has been made on uncovering the emerging Standard Model of Cosmology by such experiments as COBE and WMAP, and ESA's Planck Surveyor will likely increase our knowledge even more. Despite the success of this model, mysteries remain. Currently understood physics does not offer a compelling explanation for the homogeneity, flatness, and the origin of structure in the Universe. Cosmic Inflation, a brief epoch of exponential expansion, has been posted to explain these observations. If inflation is a reality, it is expected to produce a background spectrum of gravitational waves that will leave a small polarized imprint on the CMB. Discovery of this signal would give the first direct evidence for inflation and provide a window into physics at scales beyond those accessible to terrestrial particle accelerators. I will briefly review aspects of the Standard Model of Cosmology and discuss our current efforts to design and deploy experiments to measure the polarization of the CMB with the precision required to test inflation.

Chuss, David↗
NASA NTRS2004

Spacecraft Fire Suppression: Testing and Evaluation

The objective of this project is the testing and evaluation of the effectiveness of a variety of fire suppressants and fire-response techniques that will be used in the next generation of spacecraft (Crew Exploration Vehicle, CEV) and planetary habitats. From the many lessons learned in the last 40 years of space travel, there is common agreement in the spacecraft fire safety community that a new fire suppression system will be needed for the various types of fire threats anticipated in new space vehicles and habitats. To date, there is no single fire extinguishing system that can address all possible fire situations in a spacecraft in an effective, reliable, clean, and safe way. The testing conducted under this investigation will not only validate the various numerical models that are currently being developed, but it will provide new design standards on fire suppression that can then be applied to the next generation of spacecraft extinguishment systems. The test program will provide validation of scaling methods by conducting small, medium, and large scale fires. A variety of suppression methods will be tested, such as water mist, carbon dioxide, and nitrogen with single and multiple injection points and direct or distributed agent deployment. These injection methods cover the current ISS fire suppression method of a portable hand-held fire extinguisher spraying through a port in a rack and also next generation spacecraft units that may have a multi-point suppression delivery system built into the design. Consideration will be given to the need of a crew to clean-up the agent and recharge the extinguishers in flight in a long-duration mission. The fire suppression methods mentioned above will be used to extinguish several fire scenarios that have been identified as the most relevant to spaceflight, such as overheated wires, cable bundles, and circuit boards, as well as burning cloth and paper. Further testing will be conducted in which obstructions and ventilation will be added to represent actual spacecraft conditions (e.g., a series of cards in a card rack).

Abbud-Madrid, Angel↗
NASA NTRS1980

Simulator results of an F-14A airplane utilizing an aileron-rudder interconnect during carrier approaches and landings

A piloted simulator study was conducted to evaluate an aileron rudder interconnect (ARI) control system for the F-14A airplane in the landing configuration. Effects on pilot performance and handling characteristics were investigated. Two ARI configurations were tested and compared to the standard F-14 fleet control system. A nonlinear aerodynamic model of the F-14 was used in conjunction with a six degree of freedom motion base simulator. The evaluation task, which utilized three subject pilots, consistent of a night carrier approach and landing. Both ARI configurations produced improved pilot performance and pilot ratings when compared to the standard control system. Sideslip due to adverse yaw as considerably reduced by the ARI systems and heading control was more stable and precise. Lateral deviation from centerline was reduced during the approach and lateral touchdown dispersion on the carrier deck was reduced with the ARI control systems.

Kelly, W. W.↗
NASA NTRS1992

DSMC analysis in a heterogeneous parallel computing environment

A methodology for implementing parallel DSMC codes in a heterogeneous computing environment is described. The methodology involves the use of a common message-passing software library together with recently developed software that handles the actual interprocessor communications in a standard manner across a variety of computing platforms. Benchmark tests using a simple DSMC model problem were performed on an Intel iPSC/860, a Cray-YMP and a group of Sun workstations. The approach was found to give speedups that scaled linearly with problem size on all the computing platforms tested. This methodology was then incorporated into a production-type DSMC code to allow the simulation of problems that would not otherwise have been practical. The application of this production code to simulations of hypersonic shear flows and shock-lip interactions under near-continuum conditions is described. Synchronous and asynchronous models for implementing parallelism into DSMC simulations are also described and both models are shown to produce the same steady-state result.

Wilmoth, R. G.↗
NASA NTRS2009

Failure modes and low temperature performance of DC/DC converters

Several standard tests to evaluate key (direct current) DC/DC converter parameters were performed on different models of hybrid radiation-hard DC/DC converters. These tests were done to assess both performance and reliability during space applications that operate the converters at temperatures below the lower military range of -5°C. One of the converters failed near -110°C, but another DC/DC converter model started normally at temperatures as low as 140°C. The latter showed acceptable performance during turn-on, load transient, and synchronization tests even though some minor anomalies were observed. These results show good promise for its use in applications where the DC/DC converters will be operated at lower temperatures. An application circuit was also built and preliminary tests were performed on a commercial (low drop out) LDO type of DC to DC converter with adjustable output voltage. These can be used in point of load (POL) applications. This latter device functioned properly on the few tests that were performed; however, more testing is needed to identify potential issues with space use of this and similar devices.

Leon, Rosa↗