Search NASA⌕ Search

SEARCH · Search NASA

Results for “Streamers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Solar wind acceleration in the solar corona

The intensity ratio of the O VI doublet in the extended area is analyzed. The O VI intensity data were obtained with the ultraviolet coronagraph spectrometer (UVCS) during the SOHO campaign 'whole sun month'. The long term observations above the north pole of the sun were used for the polar coronal data. Using these measurements, the solar wind outflow velocity in the extended corona was determined. The 100 km/s level is running along the streamer borders. The acceleration of the solar wind is found to be high in regions between streamers. In the central part of streamers, the outflow velocity of the coronal plasma remains below 100 km/s at least within 3.8 solar radii. The regions at the north and south poles, characterized by a more rapid acceleration of the solar wind, correspond to regions where the UVCS observes enhanced O VI line broadenings.

Giordano, S.↗
NASA NTRS1995

Solar Wind Speed Structure in the Inner Corona at 3-12 Ro

Estimates of solar wind speed obtained by Armstrong et al. [1986] based on 1983 VLA multiple-station intensity scintillation measurements inside 12 R(sub o) have been correlated with the electron density structure observed in white-light coronagraph measurements. The observed large- scale and apparently systematic speed variations are found to depend primarily on changes in heliographic latitude and longitude, which leads to the first results on large-scale speed structure in the acceleration region of the solar wind. Over an equatorial hole, solar wind speed is relatively steady, with peak-to-peak variations of 50 km/s and an average of 230 km/s. In contrast, the near-Sun flow speed across the streamer belt shows regular large-scale variations in the range of 100-300 km/s. Based on four groups of data, the gradient is 36 km/s per degree in heliocentric coordinates (corresponding to a rise of 260 km/s over a spatial distance on the Sun of two arcmin) with a standard deviation of 2.4 km/s per degree. The lowest speeds most likely coincide with the stalks of coronal streamers observed in white-light measurements. The detection of significant wind shear over the streamer belt is consistent with in situ and scintillation measurements showing that the density spectrum has a power-law form characteristic of fully developed turbulence over a much broader range of scales than in neighboring regions.

Woo, Richard↗
NASA NTRS1998

Ulysses: UVCS Coordinated Observations

We present results from coordinated observations in which instruments on Solar and Heliospheric Observatory (SOHO) and Ulysses were used to measure the density and flow speed of plasma at the Sun and to again measure the same properties of essentially the same plasma in the solar wind. Plasma was sampled by Ultraviolet Coronagraph Spectrometer (UVCS) at 3.5 and 4.5 solar radii and by Ulysses/SWOOPS at 5 AU. Data were acquired during a nearly 2 week period in May-June 1997 at a latitude of 9-10 degrees north of the equator, on the east limb and, hence, in the streamer belt and the source location of slow wind. Density and outflow speed are compared, in order to check for preservation of the near Sun characteristics in the interplanetary medium. By chance, Ulysses was at the very northern edge of the visible streamer belt. Nevertheless, no evidence of fast wind, or mixing with fast wind coming from the northern polar coronal hole, was evident at Ulysses. The morphology of the streamer belt was similar at the beginning and end of the observation period, but was markedly different during the middle of the period. A corresponding change in density (but not flow speed) was noted at Ulysses.

Suess, S. T.↗
NASA NTRS1998

Ulysses-UVCS Coordinated Observations

We present results from coordinated observations in which instruments on SOHO and Ulysses were used to measure the density and flow speed of plasma at the Sun and to again measure the same properties of essentially the same plasma in the solar wind. Plasma was sampled by Ultraviolet Coronagraph Spectrometer (UVCS) at 3.5 and 4.5 solar radii and by Ulysses at 5 AU. Data were acquired during a nearly 2 week period in May-June 1997 at a latitude of 9-10 degrees north of the equator, on the east limb and, hence, in the streamer belt region and the source location of slow wind. Density and outflow plasma speed are compared, in order to check for preservation of the near Sun characteristics in the interplanetary medium. By chance, Ulysses was at the very northern edge of the visible streamer belt. Nevertheless, no evidence of fast wind, or mixing with fast wind coming from the northern polar coronal hole was evident at Ulysses. The morphology of the streamer belt was the same at the beginning and end of the observation period, but changed markedly during the middle of the period. A corresponding change in density (but not flow speed) was noted at Ulysses.

Suess, Steven T.↗
NASA NTRS2000

Fine Structure in the Corona and Solar Wind at High Heliographic Latitudes at Solar Maximum

Microstreams and pressure balance structures in fast solar wind were more easily detected at Ulysses at 2.2 AU over the poles than at Helios at 0.3 AU. This is because solar rotation brings sources of fast solar wind beneath sources of slow solar wind at a rate that depends on latitude, for the same size features. Dynamic interaction between the fast and slow wind tends to mix the flows and make features more difficult to detect with increasing distance from the Sun. A given sized feature takes proportionally longer to pass a longitude when it is at 80 degrees latitude than when it is at the equator. At solar maximum, Ulysses will mainly be sampling solar wind coming from above streamers and from near streamers. The data will provide information on fine structure at the tops of streamers - the stalks - and on the source of slow solar wind, The visibility of the boundaries between fast and slow wind and of the stalk will increase with increasing latitude. We will present quantitative calculations of the visibility of various sized features, with various differences in flow speed, at the location of Ulysses when it is over the south (in 2000) and north (in 2001) polar regions of the Sun.

Suess. S. T.↗
NASA NTRS2001

Fine Structure in the Corona and Solar Wind at High Heliographic Latitudes at Solar Maximum

Microstreams and pressure balance structures in fast solar wind were more easily detected at Ulysses at 2.2 AU over the poles than at Helios at 0.3 AU. This is because solar rotation brings sources of fast solar wind beneath sources of slow solar wind at a rate that depends on latitude, for the same size features. Dynamic interaction between the fast and slow wind tends to mix the flows and make features more difficult to detect with increasing distance from the Sun. A given sized feature takes proportionally longer to pass a longitude when it is at 80 degrees latitude than when it is at the equator. At solar maximum, Ulysses will mainly be sampling solar wind coming from above streamers and from near streamers. The data will provide information on fine structure at the tops of streamers - the stalks - and on the source of slow solar wind. The visibility of the boundaries between fast and slow wind and of the stalk will increase with increasing latitude. I will present quantitative calculations of the visibility of various sized features, with various differences in flow speed, at the location of Ulysses when it is over the south (in 2000) and north (in 2001) polar regions of the Sun.

Suess, S. T.↗
NASA NTRS2003

Three-Dimensional Coronal Density Structure: 1. Model

The three-dimensional (3-D) density structure of the solar corona is a fundamental boundary condition on the solar wind. Most easily applied models of the global coronal density have been restricted to date to axisymmetric 2-D cases. We present here a 3-D model made up of a superposition of multiple streamers, having distinct gaussian widths in longitude and latitude and both longitudinal and latitudinal dependence of the neutral lines implicit beneath the streamer cores. Nonradiality of streamers and solar B-angle tilt are also explicitly treated. We show how this simple model can capture many of the general properties of coronal white light observations and demonstrate how such a model can assist in the interpretation of the multiple views on coronal structures such as will be provided by the upcoming STEREO mission.

Gibson, S. E.↗
NASA NTRS2003

Dynamical and Physical Properties of a Post-Coronal Mass Ejection Current Sheet

In the eruptive process of the Kopp-Pneuman type, the closed magnetic field is stretched by the eruption so much that it is usually believed to be " open " to infinity. Formation of the current sheet in such a configuration makes it possible for the energy in the coronal magnetic field to quickly convert into thermal and kinetic energies and cause significant observational consequences, such as growing postflare/CME loop system in the corona, separating bright flare ribbons in the chromosphere, and fast ejections of the plasma and the magnetic flux. An eruption on 2002 January 8 provides us a good opportunity to look into these observational signatures of and place constraints on the theories of eruptions. The event started with the expansion of a magnetic arcade over an active region, developed into a coronal mass ejection (CME), and left some thin streamer-like structures with successively growing loop systems beneath them. The plasma outflow and the highly ionized states of the plasma inside these streamer-like structures, as well as the growing loops beneath them, lead us to conclude that these structures are associated with a magnetic reconnection site, namely, the current sheet, of this eruptive process. We combine the data from the Ultraviolet Coronagraph Spectrometer, Large Angle and Spectrometric Coronagraph Experiment, EUV Imaging Telescope, and Coronal Diagnostic Spectrometer on board the Solar and Heliospheric Observatory, as well is from the Mauna Loa Solar Observatory Mark IV K-coronameter, to investigate the morphological and dynamical properties of this event, as well as the physical properties of the current sheet. The velocity and acceleration of the CME reached up to 1800 km/s and 1 km/sq s, respectively. The acceleration is found to occur mainly at the lower corona (<2.76 Solar Radius). The post-CME loop systems showed behaviors of both postflare loops (upward motion with decreasing speed) and soft X-ray giant arches (upward motion with constant speed, or acceleration) according to the definition of Svestka. In the current sheet, the presence of highly ionized ions, such as Fe(+17) and Ca(+13), suggests temperature as high as (3-4) x 10(exp 6) K, and the plasma outflows have speeds ranging from 300 to 650 km/s. Absolute elemental abundances in the current sheet show a strong first ionization potential effect and have values similar to those found in the active region streamers. The magnetic field strength in the vicinity of the current sheet is found to be of the order of 1 G.

Ko, Yuan-Kuen↗
NASA NTRS2006

Over-and-Out Coronal Mass Ejections: Blowouts of Magnetic Arches by Ejective Flares in One Foot

Streamer puffs from compact ejective flares in the foot of an outer loop of the magnetic arcade under a streamer were recently identified as a new variety of coronal mass ejection (CME) (Bemporad, Sterling, Moore, & Poletto 2006, ApJ Letters, in press). In the reported examples, the compact flares produced only weak to moderate soft X-ray bursts having peak intensities no stronger than GOES class C3. Here, we present two examples of this type of CME in which the compact flare in the flank of the steamer base is much stronger (one M-class, the other X-class in GOES X-rays) and the resulting streamer puff is wider and brighter than in the discovery examples. Coronal dimming observed in SOHOBIT Fe XII images in the launching of each of these two CMEs M e r supports the view that these CMEs are produced by a high loop of the steamer arcade being blown out by magnetoplasma ejecta exploding up the leg of the loop from the flare. In addition, we present evidence that this same type of CME occurs on larger scales than in the above examples. We examine a sequence of flare eruptions seated on the north side of AR 8210 as it rotated across the southern hemisphere in late April and early May 1998. Each flare occurs in synchrony with the launching of a large CME centered on the equator. Coronal dimming in EIT Fe XII images shows the trans-equatorial footprints of these CMEs extending north from the flare site. The set of flare-with-CME events includes the trans-equatorial loop eruptions reported by Khan & Hudson (1998, GRL, 27, 1083). Our observations indicate that these CMEs were not driven by the self-eruption of the transequatorial loops, but that these loops were part of a trans-equatorial magnetic arch that was blown open by ejecta from the flares on the north side of AR 8210. Thus, a relatively compact ejective flare can be the driver of a CME that is much larger in lateral extent than the flare and is laterally far offset from the flare. It has previously been thought that such spatial disparities between the flare and the CME prohibited the flare explosion from being the driver of the CME (e.g., Kahler 1992, ARA&A, 30, 113).

Moore, Ronald L.↗
NASA NTRS2019

Near-Sun Observations of an F-Corona Decrease and K-Corona Fine Structures

Remote observations of the solar photospheric light scattered by electrons (K-corona) and dust (F-corona/Zodiacal light) have been made from the ground during eclipses and from space at 1 AU and as close as 0.3 AU. Previous observations of dust scattering have not confirmed the existence of a theoretically-predicted dust free zone near the Sun. The transient nature of the corona has been well characterized for large events, but questions still remain (e.g. initiation, production of solar energetic particles) and for small events even the structure is uncertain. Here we report on imaging the solar corona, from the Parker Solar Probe spacecraft, during the first two perihelion passes (0.16-0.25 AU), each of ten days duration. The view from these distances is qualitatively similar to the historical view, but there are some significant differences in the details. We have uncovered at short elongations a decrease in the intensity of the F-coronal intensity, which is suggestive of the long-sought dust free zone. Also we have resolved the plasma structure of very small eruptions, which are being frequently ejected from the Sun. They take two forms - the commonly observed magnetic flux ropes or the predicted, but not yet observed, magnetic islands arising from the tearing mode instability in the current sheet. Our observations of the coronal streamer evolution confirm the large-scale topology of the solar corona, but they also reveal that, as recently predicted, streamers are composed of yet smaller sub-streamers channeling continual density fluctuations at all visible scales.

Astronomy and astrophysics↗
NASA NTRS2022

Constraining Global Coronal Models with Multiple Independent Observables

Global coronal models seek to produce an accurate physical representation of the Sun's atmosphere that can be used, for example, to drive space-weather models. Assessing their accuracy is a complex task, and there are multiple observational pathways to provide constraints and tune model parameters. Here, we combine several such independent constraints, defining a model-agnostic framework for standardized comparison. We require models to predict the distribution of coronal holes at the photosphere, and neutral line topology at the model's outer boundary. We compare these predictions to extreme-ultraviolet (EUV) observations of coronal hole locations, white-light Carrington maps of the streamer belt, and the magnetic sector structure measured in situ by Parker Solar Probe and 1 au spacecraft. We study these metrics for potential field source surface (PFSS) models as a function of source surface height and magnetogram choice, as well as comparing to the more physical Wang–Sheeley–Arge (WSA) and the Magnetohydrodynamic Algorithm outside a Sphere (MAS) models. We find that simultaneous optimization of PFSS models to all three metrics is not currently possible, implying a trade-off between the quality of representation of coronal holes and streamer belt topology. WSA and MAS results show the additional physics that they include address this by flattening the streamer belt while maintaining coronal hole sizes, with MAS also improving coronal hole representation relative to WSA. We conclude that this framework is highly useful for inter- and intra-model comparisons. Integral to the framework is the standardization of observables required of each model, evaluating different model aspects.

S. T. Badman↗
NASA NTRS2023

Tracking Nonradial Outflows in Extreme Ultraviolet and White Light Solar Images

Understanding the solar corona requires knowledge of its dynamics through its various layers and subsequent connectivity to the heliosphere. This requires understanding the nature of the outflows and the physical transitions through the middle corona (∼1.5–6.0 Rs). While this region is still inaccessible to in situ measurements, remote sensing observations are available, but their interpretation can be controversial due to line-of-sight effects and the nonradial motion of outflowing structures close to the Sun (≤3.0 Rs). In this work, we describe a method to mitigate these challenges by generating nonradial height–time profiles of outflows by using advanced image processing techniques. The northern and southern boundaries of a large equatorial streamer during the 2008 solar minimum were identified in STEREO/SECCHI solar images, using two different methodologies based on thresholds of brightness and piecewise polynomial function fitting. To address line-of-sight issues, we used tomographic reconstruction of the 3D distribution of the coronal electron density based on SECCHI/COR2 images. Spectral analysis of the time series of the position angle of the streamer boundary revealed its oscillatory nature at some heights at 36–48 and 10.5–14.6 hr. Dividing the distance between the northern and southern streamer boundaries in equal parts at each height, we obtained nonradial height–time paths from which we generated nonradial profiles of corona/solar wind plasma outflow. We tracked outflows as they moved uninterruptedly from the Sun in EUVI, through COR1 and into COR2. Finally, we discuss the preliminary results of nonradial plane-of-sky velocities for a coronal mass ejection and two small-scale features.

Nathalia Alzate↗
NASA NTRS2024

Connecting the Low to High Corona: Propagating Disturbances as Tracers of the Near-Sun Solar Wind

We revisit a quiet 14 day period of solar minimum during 2008 January and track substreamer propagating disturbances (PDs) from low heights in STEREO/EUVI to the extended corona through STEREO/COR1 and into STEREO/COR2 along nonradial paths that trace the structure of the underlying streamers. Using our recently developed method for generating nonradial height–time profiles of outward PDs (OPDs) and inward PDs (IPDs), we obtained their velocities along the radial and position angle directions. Our analysis of 417 unique OPDs revealed two classes: slow and fast OPDs. Slow OPDs form preferentially at ≈1.6 Re closer to the streamer boundaries, with asymmetric occurrence rates, and show speeds of -+ - 16.4 km s 8.4 26.6 1 at 1.5 Re and accelerate up to- + - 200.1 km s 57.9 71.1 1 at 7.5 Re. Fast OPDs form preferentially at ≈1.6 Re and at ≈3.0 Re both at the streamer boundaries and slightly more often within them. They show speeds of - + - 87.8 km s 24.8 59.1 1 at 1.5 Re up to -+ - 197.8 km s 46.7 61.8 1 at 7.5 Re. IPDs are observed forming at ≈1.8 Re with speeds of tens of kilometers per second, mostly concentrated in the aftermath of a coronal mass ejection eruption. We present an example in which we show that periodic brightness variations related to OPDs remained in the range of 98 to 128 minutes, down to ≈2.0 Re, well within the field of view of COR1. The velocity profiles of slow OPDs for a heliocentric height below 3.0 Re show good agreement with speeds more closely related to the bulk solar wind obtained via interplanetary scintillation.

Astronomical techniques↗
DOE OSTI2024

Development of a Performance Portable Non-Equilibrium Plasma Fluid Solver on Adaptive Grids

This presentation will describe the numerical techniques, programming paradigms, verification, and performance of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures. Our plasma fluid model solves the conservation equations for self-consistent electrostatic Poisson, electron and heavy species transport, and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive mesh management library, AMReX (Zhang et al., JOSS, 4 (37) 1370, 2019), and can be built and run on widely available vendor specific GPU architectures (NVIDIA/AMD/Intel). We utilize a non-subcycled second order semi-implicit time-stepping method where all adaptive mesh refinement (AMR) levels are advanced with the same time step. The composite multi-level multigrid solver from within AMReX is used for each of the governing equations that are cast into a Helmholtz equation form. We have also developed a python based chemical mechanism parser framework that uses a similar format as CANTERA (Goodwin et al., Zenodo, 2018) yaml files as input. Our custom parser reads the yaml file and provides C++ files with transport and production rate functions that can be executed on both host (CPU) and device (GPU). We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on low-pressure capacitive and high-pressure streamer discharges. Our initial performance studies indicate 10X speed-up using 20 NVIDIA GPUs versus 200 CPUs for an atmospheric streamer discharge problem solved on a 512 x 1024 x 512 grid.

graphics processing units↗
DOE OSTI2026

Vidyut3d: A GPU accelerated fluid solver for non-equilibrium plasmas on adaptive grids

We present the numerical methods, programming methodology, verification, and performance assessment of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures, in this work. Our plasma fluid model solves the coupled conservation equations for species transport, electrostatic Poisson and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive-grid/particle management library, AMReX, and is portable over widely available vendor specific GPU architectures. We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth-order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on capacitive discharges and atmospheric pressure streamer propagation. We demonstrate the use of our solver on two 3D simulation cases: an atmospheric streamer propagation in Ar-H2 mixtures and a low pressure three-electrode radio frequency reactor. Our performance studies on three different CPU+GPU architectures indicate ~ 150-400X speed-up using AMD and NVIDIA GPUs per time step compared to a single CPU core for a 4 million cell simulation with 15 species.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Experimental study of high-energy single-pulse nanosecond discharges in pin-to-pin configuration

Single-pulse pin-to-pin nanosecond pulsed discharges in ambient air (gap distances of 3–7 mm) were investigated at high pulse energies (∼20–30 mJ deposited energy per 11 ns full width at half maximum pulse). A Michelson interferometry setup (532 nm continuous-wave laser) was employed to record time-resolved interferograms of the discharge, enabling spatially resolved calculation of the electron number density. An intensified charge-coupled device camera was used to capture the spatiotemporal evolution of the discharge (streamer formation and spark channel development), and Coherent Anti-Stokes Raman Spectroscopy (CARS) was used to measure post-discharge N 2 vibrational temperatures. Discharge current and voltage were monitored with a back-current shunt. The discharge was initiated with simultaneous cathode-directed and anode-directed streamers that bridge the gap within ∼1 ns and form a luminous, filamentary plasma channel immediately after breakdown. Laser interferometry measurements showed peak electron number densities of the order of 10 1 7–10 18 cm −3 , occurring about 15–20 ns after pulse arrival at the discharge gap. Shorter gap discharges yielded higher peak electron densities, consistent with the higher energy density in the smaller gaps. Spatially, the electron density was highest near the electrodes and decreased toward the midgap region, with 5 and 7 mm gaps exhibiting a pronounced drop in the central channel. CARS indicated initial vibrational temperatures of approximately 4000–6000 K in the spark core of ∼50 ns after the discharge onset, decaying on a ∼500 ns timescale as the plasma cooled and recombined.

Coherent anti-Stokes Raman spectroscopy↗
DOE OSTI2024

On the modes of nanosecond pulsed plasmas for combustion ignition of quiescent CH 4 -air mixtures

The effect of transient plasma modes on ignition kernel development are discussed here for a quiescent CH 4 -air combustion model system. A 10 ns high-voltage pulse was applied to a pin-to-pin electrode in lean fuel-air mixtures at room temperature and atmospheric pressure. High-impedance streamer, transient spark and low-impedance spark discharges were identified based on pulse waveforms of voltage and current. A sustained ignition kernel expansion was observed when the plasma discharge transitioned into a transient spark or spark discharge. The minimum ignition energy was obtained at the transient spark mode, which has less than a third of the energy or Coulomb transfer compared to the low-impedance spark. Employing repetitive 10-pulse sequence at 10 kHz, the lean-fuel limit was extended from an equivalence ratio of 0.6 for the single pulse ignition to 0.5. The use of repetitive pulses also allowed streamer breakdown or spark initiation to occur at a lower voltage.

CH 4↗
DOE OSTI2025

Vidyut3d: A Gpu Accelerated Fluid Solver for Non-Equilibrium Plasmas on Adaptive Grids

We present the numerical methods, programming methodology, verification, and performance assessment of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures, in this work. Our plasma fluid model solves the coupled conservation equations for species transport, electrostatic Poisson and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive-grid/particle management library, AMReX, and is portable over widely available vendor specific GPU architectures. We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth-order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on capacitive discharges and atmospheric pressure streamer propagation. We demonstrate the use of our solver on two 3D simulation cases: an atmospheric streamer propagation in Ar-H2 mixtures and a low pressure twin electrode radio frequency reactor. Our performance studies on three different CPU+GPU architectures indicate approximately 150-400X speed-up using AMD and NVIDIA GPUs per time step compared to a single CPU core for a 4 million cell simulation with 15 species.

Sitaraman, Hariswaran↗