SEARCH · Search NASA

Results for “Transmutation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Control Boundary Analysis for Liquid-Fueled Molten Salt Reactors

The US Nuclear Regulatory Commission (NRC) will likely require license applicants for liquid-fueled molten salt reactors (MSRs) with circulating fuel to submit a nuclear material control and accounting (MC&A) plan or provide a detailed MC&A program description for the facility. In liquid-fueled MSRs with special nuclear material (SNM) in bulk form (i.e., not in discrete items) and with rapidly changing quantities due to fuel transmutation and depletion, a novel MC&A approach is needed because traditional nuclear material accounting methods with material balance evaluations will not be sufficient. This report details the continued efforts carried out at Oak Ridge National Laboratory (ORNL) during FY 2025 to develop a distinct MC&A approach suitable specifically for domestic safeguards of the first-of-a-kind MSRs. These efforts are built on previous ORNL efforts reported in ORNL/SPR-2023/3181 and ORNL/SPR-2024/3555.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Nanostructured Alumina-Forming Austenitic Alloy (NAFA) Production Using Advanced Manufacturing

Alumina-forming austenitic (AFA) alloys are well known for their exceptional corrosion-resistant properties due to the formation of a dense oxide scale beneficial in their application as a nuclear material. However, use of the alloys in core material applications is limited due to the high nickel-transmutation and helium generation rate in service, leading to swelling and reduced lifetimes. Enhancing the sink strength to pin gas bubbles and increasing gas management of the material may mitigate many of the degradation phenomena expected during alloy deployment (such as high-temperature helium embrittlement and cavity swelling for lead-cooled fast-reactor applications). Nanostructured materials are usually produced using a time-consuming and expensive batch process like mechanical alloying to achieve the fine homogenous distribution of nanoprecipitates throughout the matrix material. Integrating the nanoprecipitates in modern additive manufacturing processes has proven difficult, as the required nano-sizes or number densities cannot be achieved simultaneously. Efforts to increase the number density of precipitates by adding more precipitate-forming rare-earth elements led to agglomeration of such elements, while the nano-sized precipitates did not form in sufficient quantity when not enough rare-earth element was use. In this work a novel approach to advanced manufacturing and the fabrication of Nanostructured AFA (NAFA) materials was chosen. A dual precipitate-forming NAFA steel with a chemistry more suitable for advanced reactor applications was produced to create an environmentally resistant, high-sink-strength austenitic alloy for advanced reactor cladding applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Radioisotope Science and Technology Division FY 2025 Core R&D Summary Report: Competitive Projects, Postdoctoral Researchers, and Student Interns

R&D efforts in support of the Oak Ridge National Laboratory (ORNL) Isotope Program Radioisotope Portfolio are led by the Radioisotope Science and Technology Division (RSTD). In addition to supporting the ORNL Isotope Program Radioisotope Portfolio, RSTD supports a portfolio of research related to fundamental properties of radioisotopes and radioisotope applications, including diagnostic and therapeutic uses of medical radioisotopes, radioisotopes for national security, and the production of 238 Pu for the National Aeronautics and Space Administration (NASA) and US Department of Energy (DOE) Office of Nuclear Energy. RSTD is organized into functional science and engineering groups, with most staff members supporting multiple programs. The goal of this organization is to enable synergy between programs such that R&D advances coming from other programs may provide benefit to the ORNL Isotope Program. R&D within RSTD is focused around addressing five grand challenges, as documented in the strategic plan for the DOE Office of Isotope R&D and Production, or DOE Isotope Program (IP), Radioisotope Production R&D activities at ORNL: 1. Maximizing the scientific output of radioisotope transmutation resources, 2. Maximizing the scientific output of radioisotope processing resources, 3. Minimizing waste and having optimal waste disposition, 4. Focusing on product quality and reliability, and 5. Expanding the use of beneficial isotopes. The ORNL Core R&D program, one of the primary R&D components within the ORNL Isotope Program Radioisotope Portfolio, ranges from benchtop to demonstration activities, with a focus on researching enhanced production techniques, developing emerging isotopes, and developing the talent pipeline for radioisotope science and technology. Projects within the Core R&D Program are led primarily by RSTD staff members. In supporting enhanced production techniques, the Core R&D program presents an opportunity to fund novel R&D that might not be tied to a specific radioisotope product but still presents a high potential for broad applicability in the longer term. In supporting the development of emerging isotopes, the Core R&D program develops high-priority isotopes that are not able to be fully supported through production funds.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2025

Implementation of Johnson Noise Thermometry into Radiation Hardened Electronics

The random motion of charge carriers in an electrical conductor is a function of its temperature. This phenomenon generates an electrical signal, referred to as Johnson noise, that is present in all analog signals. Conversely, the temperature dependence of the Johnson noise spectrum also enables a direct measurement of absolute temperature, which can provide a secondary measurement of temperature when quantified using sensors such as resistive temperature devices (RTDs) in a process called Johnson noise thermometry (JNT). For nuclear environments, this is of particular interest in correcting for RTDs signal drift caused by accumulation, transmutation, and displacement damage caused by neutron and gamma irradiation.

42 ENGINEERING↗

DOE OSTI2025

Report on Preliminary Detailed Experimental Plan for Neutron Irradiation of A709 at ATR and HFIR

Advanced nuclear power technologies will use higher temperatures as a means to extract energy at a higher efficiency than current plants and therefore put a larger demand on the structural materials. Improved performance of structural materials could enable greater safety margins, longer plant lifetimes, and reduce maintenance costs. Alloy 709 is championed as the next generation of austenitic alloys for advanced nuclear reactors. In parallel to the ASME code case pursued, the AMMT program is initiating a neutron irradiation campaign to provide first-of-a-kind engineering data to establish operational design parameters and how the mechanical response is modified by environmental factors. This document refines the AMMT neutron irradiation campaign to a 4 year program to support the generation of creep knockdown factors for Alloy 709 and welded Alloy 709. The campaign is divided among two national laboratories, Oak Ridge National Laboratory and Idaho National Laboratory, to use the strengths of each laboratory. Through a cooperative plan, time-independent properties and time-dependent properties will be obtained across a large temperature window, nominally 300°C to 800°C, damage levels up to 10 dpa, and with and without the impacts of transmutation produced helium.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2026

Report on Preliminary Detailed Experimental Plan for Neutron Irradiation of A709 at ATR and HFIR

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Summary of the Initial Post-Irradiation Characterization of HFIR-Irradiated Low-N and High-N HT-9 Steel

Reference cladding systems for sodium fast reactors are based on the historical steel, HT-9. HT-9 is a Fe12Cr ferritic/martensitic steel with additions of Mo, W, V, and other minor elements and demonstrates low irradiation swelling and adequate mechanical properties. Extensive irradiation literature exists on the use of HT-9 as cladding for metal fuel, primarily irradiation on the U-Zr/HT-9 system from the Experimental Breeder Reactor-II (EBR-II) and Fast Flux Test Facility (FFTF) sodium fast reactor, and as a structural material from experiments in the FFTF. The large amount of historical data makes the U-Zr/HT-9 system the reference fuel specification for many nuclear reactor vendors that seek to license modern sodium-cooled fast reactors in the United States. However, it is yet unclear how variations in impurity content within HT-9 fundamentally affect irradiation performance at various irradiation temperatures. Recent work suggests that impurity content may noticeably alter the production of helium through nuclear transmutation. For these reasons, High-Flux Isotope Reactor (HFIR) irradiation of HT-9 steels with known variations in the impurity content is particularly timely to generate data to enable more accurate refinement of the chemical specification for nuclear-grade HT-9 material. This report summarizes the initial transmission electron microscopy characterization of HFIR-irradiated HT-9 steels following mechanical property measurements by the Advanced Fuels Campaign (AFC). This report includes qualitative results of the cavity, dislocation loop and cluster/precipitate microstructures as well as radiation-induced segregation. Quantitative results are being shared with partner institutions and will be included in more detail in a future report in FY2026.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Microstructure, electrical resistivity, and tensile properties of neutron-irradiated Cu–Cr–Nb–Zr

High strength, high conductivity copper alloys that can resist creep at high temperatures are one of the primary candidates for efficient heat exchangers in fusion reactors. Cu–Cr–Nb–Zr (CCNZ) alloys, which were designed to improve the strength and creep life of ITER Cu–Cr–Zr (CCZ) reference alloys, have been found to have comparable electrical conductivity and tensile properties to CCZ alloys. The measured creep rupture times for these improved alloys is about ten times higher than the ITER reference alloys at 90–125 MPa at 500 °C. However, the effects of neutron irradiation on these alloys, and the ensuing material properties, have not been studied; thus, their utility in a fusion reactor environment is not well understood. This study characterizes the room temperature mechanical and electrical properties of a neutron-irradiated CCNZ alloy and compares them to a neutron-irradiated ITER reference heat sink CCZ alloy. Tensile specimens were neutron irradiated in the High Flux Isotope Reactor (HFIR) to 5 dpa between 250 °C and 325 °C. Post-irradiation characterization included electrical resistivity measurements, hardness, and tensile tests. Microstructural evaluation used scanning electron microscopy, energy dispersive x-ray spectroscopy, and atom probe tomography to characterize the irradiation-produced changes in the microstructure and investigate the mechanistic processes leading to post-irradiation properties. Transmutation calculations were validated with composition measurements from atom probe data and used to calculate contributions to the increased electrical resistivity measured after irradiation. Comparisons with CCZ alloys in the same irradiation heat found that the post-irradiated CCNZ and CCZ alloys had comparable electrical resistivity. Although CCNZ alloys suffered more irradiation hardening than CCZ, the overall tensile behavior deviated very little from non-irradiated values in the temperature range studied.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Implications of Microstructure in Helium-Implanted Nanocrystalline Metals

Helium bubbles are known to form in nuclear reactor structural components when displacement damage occurs in conjunction with helium exposure and/or transmutation. If left unchecked, bubble production can cause swelling, blistering, and embrittlement, all of which substantially degrade materials and—moreover—diminish mechanical properties. On the mission to produce more robust materials, nanocrystalline (NC) metals show great potential and are postulated to exhibit superior radiation resistance due to their high defect and particle sink densities; however, much is still unknown about the mechanisms of defect evolution in these systems under extreme conditions. Here, the performances of NC nickel (Ni) and iron (Fe) are investigated under helium bombardment via transmission electron microscopy (TEM). Bubble density statistics are measured as a function of grain size in specimens implanted under similar conditions. While the overall trends revealed an increase in bubble density up to saturation in both samples, bubble density in Fe was over 300% greater than in Ni. To interrogate the kinetics of helium diffusion and trapping, a rate theory model is developed that substantiates that helium is more readily captured within grains in helium-vacancy complexes in NC Fe, whereas helium is more prone to traversing the grain matrices and migrating to GBs in NC Ni. Our results suggest that (1) grain boundaries can affect bubble swelling in grain matrices significantly and can have a dominant effect over crystal structure, and (2) an NC-Ni-based material can yield superior resistance to irradiation-induced bubble growth compared to an NC-Fe-based material and exhibits high potential for use in extreme environments where swelling due to He bubble formation is of significant concern.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Spin Sum Rule of the Nucleon in the QCD Instanton Vacuum

We briefly review some essential aspects of the QCD instanton vacuum in relation to the quantum breaking of conformal symmetry, the spontaneous breaking of chiral symmetry, and the axial U(1) anomaly. The anomaly causes the intrinsic nucleon spin to transmute to the vacuum topological charge by quantum tunneling. We use Ji′s invariant spin decomposition to discuss the spin budget of the nucleon as a quark–diquark state in the QCD instanton vacuum. A measure of the intrinsic quark spin of the nucleon is a measure of the quenched topological susceptibility of the QCD instanton vacuum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Isochronic Evolution and the Radioactive Decay of r-process Nuclei

Abstract We report on the creation and application of a novel decay network that uses the latest data from experiment and evaluation. We use the network to simulate the late-time phase of the rapid neutron capture ( r ) process. In this epoch, the bulk of nuclear reactions, such as radiative capture, have ceased, and nuclear decays are the dominant transmutation channels. We find that the decay from short-lived to long-lived species naturally leads to an isochronic evolution in which nuclei with similar half-lives are populated at the same time. We consider random perturbations along each isobaric chain to initial solar-like r -process compositions to demonstrate the isochronic nature of the late-time phase of the r -process. Our analysis shows that detailed knowledge of the final isotopic composition allows for the prediction of late-time evolution with a high degree of confidence despite uncertainties that exist in astrophysical conditions and the nuclear physics properties of the most neutron-rich nuclei. We provide the time-dependent nuclear composition in the Appendix as supplemental material.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Quantum simulation of massive Thirring and Gross--Neveu models for arbitrary number of flavors

The study of fermionic quantum field theories is an important problem for realizing the standard model of particle physics on a quantum computer. As a step towards this goal, we consider the massive Thirring and Gross--Neveu models with arbitrary number of fermion flavors, $N_f$, discretized on a spatial one-dimensional lattice of size $L$ in the Hamiltonian formulation. We compute the gate complexity using the higher-order product formula and using block-encoding/qubitization and quantum singular value transformations in the limit of large $N_f$ and $L$. We also prepare the ground states of both models with excellent fidelity for system sizes up to 20 qubits with $N_f = 1,2,3,4$ using the adaptive-variational quantum imaginary time algorithm. In addition, we also classify the dynamical Lie algebras of these relativistic fermionic models and show that they belong to the same isomorphism class. Our work is a concrete step towards the quantum simulation of real-time dynamics of large $N_f$ fermionic quantum field theories models relevant for chiral symmetry breaking, understanding dimensional transmutation, and exploring the conformal window of field theories on near-term and early fault-tolerant quantum computers.

FOS: Physical sciences↗

NASA NTRS1975

Low cost silicon solar arrays

The economic production of silicon solar cell arrays circumvents p-n junction degradation by nuclear doping, in which the Si-30 transmutes to P-31 after thermal neutron capture. Also considered are chemical purity specifications for improved silicon bulk states, surface induced states, and surface states.

Goldsmith, J. V.↗

NASA NTRS1983

Imaging performance of annular apertures. IV - Apodization and point spread functions. V - Total and partial energy integral functions

Reference is made to a study by Tschunko (1979) in which it was discussed how apodization modifies the modulation transfer function for various central obstruction ratios. It is shown here how apodization, together with the central obstruction ratio, modifies the point spread function, which is the basic element for the comparison of imaging performance and for the derivation of energy integrals and other functions. At high apodization levels and lower central obstruction (less than 0.1), new extended radial zones are formed in the outer part of the central ring groups. These transmutation of the image functions are of more than theoretical interest, especially if the irradiance levels in the outer ring zones are to be compared to the background irradiance levels. Attention is then given to the energy distribution in point images generated by annular apertures apodized by various transmission functions. The total energy functions are derived; partial energy integrals are determined; and background irradiance functions are discussed.

Tschunko, H. F. A.↗

NASA NTRS1983

Development and fabrication of a high current, fast recovery power diode

A high voltage (VR = 1200 V), high current (IF = 150 A), fast recovery ( 700 ns) and low forward voltage drop ( 1.5 V) silicon rectifier was designed and the process developed for its fabrication. For maximum purity, uniformity and material characteristic stability, neutron transmutation n-type doped float zone silicon is used. The design features a hexagonal chip for maximum area utilization of space available in the DO-8 diode package, PIN diffused junction structure with deep diffused D(+) anode and a shallow high concentration n(+) cathode. With the high temperature glass passivated positive bevel mesa junction termination, the achieved blocking voltage is close to the theoretical limit of the starting material. Gold diffusion is used to control the lifetime and the resulting effect on switching speed and forward voltage tradeoff. For solder reflow assembly, trimetal (Al-Ti-Ni) contacts are used. The required major device electrical characteristics were achieved. Due to the tradeoff nature of forward voltage drop and reverse recovery time, a compromise was reached for these values.

Berman, A. H.↗

NASA NTRS1985

Thermal detectors as single photon X-ray spectrometers

In a thermal detector employed for X-ray spectroscopy applications, the energy of an X-ray is converted to heat in a small mass, and the energy of that X-ray inferred from the size of the temperature rise. The present investigation is concerned with the possibility to make an extremely low heat capacity calorimeter which can be employed as a thermal detector. Several types of calorimeters were fabricated and tested at temperatures as low as approximately 0.05 K. The obtained devices make use of thermistors constructed of melt-doped silicon, nuclear transmutation doped (NTD) germanium, and ion-implanted silicon with a variety of materials for the support and electrical leads. The utility of these microcalorimeters as X-ray spectrometers could be verified.

Moseley, S. H.↗

NASA NTRS1987

Neutron radiation tolerance of Au-activated silicon

Double injection devices prepared by the introduction of deep traps, using the Au activation method have been found to tolerate gamma irradiation into the Gigarad (Si) region without significant degradation of operating characteristics. Silicon double injection devices, using deep levels creacted by Au diffusion, can tolerate fast neutron irradiation up to 10 to the 15th n/sq cm. Significant parameter degradation occurs at 10 to the 16th n/sq cm. However, since the actual doping of the basic material begins to change as a result of the transmutation of silicon into phosphorus for neutron fluences greater than 10 to the 17th/sq cm, the radiation tolerance of these devices is approaching the limit possible for any device based on initially doped silicon.

Joyner, W. T.↗

NASA NTRS1990

The nu-process

As the core of a massive star collapses to form a neutron star, the flux of neutrinos in the overlying shells of heavy elements becomes so great that, despite the small cross section, substantial nuclear transmutation is induced. Neutrinos excite heavy elements and even helium to particle unbound levels. The evaporation of a single neutron or proton, and the back reaction of these nucleons on other species present, significantly alters the outcome of traditional nucleosynthesis calculations leading to a new process: nu-nucleosynthesis. Modifications to traditional hydrostatic and explosive varieties of helium, carbon, neon, oxygen, and silicon burning are considered. The results show that a large number of rare isotopes, including many of the odd-Z nuclei from boron through copper, owe much of their present abundance in nature to this process.

Woosley, S. E.↗