SEARCH · Search NASA

Results for “continuous relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Alternative fuels

Potential problems related to the use of alternative aviation turbine fuels are discussed and both ongoing and required research into these fuels is described. This discussion is limited to aviation turbine fuels composed of liquid hydrocarbons. The advantages and disadvantages of the various solutions to the problems are summarized. The first solution is to continue to develop the necessary technology at the refinery to produce specification jet fuels regardless of the crude source. The second solution is to minimize energy consumption at the refinery and keep fuel costs down by relaxing specifications.

Grobman, J. S.↗

NASA NTRS1984

A quantitative study relating observed shear in photospheric magnetic fields to repeated flaring

In this paper a quantitative evaluation of the shear in the magnetic field along the neutral line in an active region during an epoch of flare activity is presented. Shear is defined as the angular difference in the photosphere between the potential magnetic field, which fits the boundary conditions imposed by the observed line-of-sight field, and the observed magnetic field. For the active region studied, this angular difference (shear) is non-uniform along the neutral line with maxima occurring at the locations of repeated flare onsets. It is suggested that continued magnetic evolution causes the field's maximum shear to exceed a critical value of shear, resulting in a flare around the site of maximum shear. Evidently, the field at the site of the flare must relax to a state of shear somewhat below the critical value (but still far from potential), with subsequent evolution returning the field to the critical threshold. This inference is drawn because several flares occured at sites of maximum photospheric shear which were persistent in location.

Hagyard, M. J.↗

DOE OSTI2024

Structure and migration of heavily irradiated grain boundaries and dislocations in Ni in the athermal limit

The microstructural evolution at and near preexisting grain boundaries (GBs) and dislocations in materials under high radiation doses is still poorly understood. In this work, we use the creation relaxation algorithm (CRA) developed for atomistic modeling of high-dose irradiation in bulk materials to probe the athermal limit of saturation of GB and dislocation core regions under irradiation in fcc Ni. We find that, upon continuously subjecting a single dislocation or GB to Frenkel pair creation in the athermal limit, a local steady-state disordered defect structure is reached with excess properties that fluctuate around constant values. Case studies are given for a straight screw dislocation which elongates into a helix under irradiation and several types of low- and high-angle GBs, which exhibit coupled responses such as absorption of extrinsic dislocations, roughening, and migration. A positive correlation is found between the initial GB energy and the local steady-state GB energy under irradiation across a wide variety of GB types. Metastable GB structures with similar density in the defect core region but different initial configurations are found to converge to the same limiting structure under CRA. The mechanical responses of pristine and irradiated dislocations and GB structures are compared under an applied shear stress. Irradiated screw and edge dislocations are found to exhibit a hardening response, migrating at larger flow stresses than their pristine counterparts. Mobile GBs are found to exhibit softening or hardening responses depending on GB character. Although some GBs recover their initial pristine structures upon migration outside of the radiation zone, many GBs sustain different flow stresses corresponding to altered mobile core structures.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Target Optimization Study: Tolerance Sensitivity

A Work Package was initiated to investigate the potential for target optimization. The current design is made up of 82 disks 0.5 mm thick spaced 0.25 mm apart for helium coolant flow. This disk thickness and gap width are a result of continual increases is beam power and hence volumetric heating rate. Thickening the disks would mean higher disk temperatures, but this would be weighed against the prospect of fewer, thicker disks and wider coolant gap spaces, and the relaxed tolerances that would result. Fabrication of the target holder would be easier and less expensive, and target assembly would also be easier.

43 PARTICLE ACCELERATORS↗

NASA NTRS1973

Effect of photochemical models on calculated equilibria and cooling rates in the stratosphere

The determination of the relaxation time of a temperature perturbation in the stratosphere must take into account the effects of the absorption of solar energy by ozone, while the ozone density itself is dependent on temperature. A photochemical model, consisting of continuity equations for each of 29 constituents with reaction rates and adjustment times, is used to obtain the vertical distribution of ozone. The altitude range from 35 to 60 km in non-Arctic regions is shown to be in approximate joint radiative-photochemical equilibrium. The temperature and ozone distributions are thus well buffered. Modest changes in ozone and temperature were calculated on the basis of this model from large changes in cooling rates and reaction rates, and the results are shown to be more in line with actual observations. The importance of estimating the mixing ratios for NO and H2O is emphasized.

Blake, D.↗

DOE OSTI2026

Digital quantum magnetism on a trapped-ion quantum computer

Digital quantum matter—realized when discrete quantum gates approximate continuous time evolution—is susceptible to heating into chaotic, structureless states. If digitization errors are adequately suppressed, a long-lived transient regime of approximately energy-conserving dynamics can be observed on gate-based quantum computers. Conservation of energy, in turn, enables the exploration of a wide variety of complex behaviours observed in equilibrium systems, ranging from the non-trivial microscopic origins of thermalization itself to the stabilization of effective models hosting exotic emergent properties. Here we use Quantinuum’s H2 quantum computer to simulate digitized dynamics of the quantum Ising model, suppressing digitization errors well enough to observe thermalization on timescales that severely challenge classical simulation methods. Relaxation of an inhomogeneous state reveals an emergent hydrodynamics owing to approximate energy conservation and we compute the associated diffusion constant. By reprogramming our simulations to take place on a triangular lattice with periodic boundary conditions, we observe thermalization consistent with emergent gauge and topological constraints resulting from lattice frustration. Furthermore, our results were enabled by continued advances in two-qubit gate quality (native partial entangler fidelities of 99.94(1)%) and establish digital quantum computers as powerful tools for studying (effectively) continuous-time dynamics.

Information theory and computation↗

DOE OSTI2020

Ink-substrate interactions during 3D printing revealed by time-resolved coherent X-ray scattering

Additive printing techniques are regarded as revolutionary and versatile methods of advanced device manufacturing, stemming from the possibility to pattern materials on a custom-based approach and the potential to create novel microstructures and achieve new functionalities. Despite these advantages, the inherent anisotropy of the printing process is a source of property gradients within the printed materials, often associated with variable and/or poor performance. Up to date, the evolutionary pathways associated with printing have largely remained unaddressed, mainly owing to the difficulty to study the transformations induced in the material during processing. Time-resolved coherent X-ray scattering techniques, such as X-ray photon correlation spectroscopy, enable the in situ study of transient nanoscale and mesoscale states in a large variety of materials, including amorphous ones, by directly accessing the most relevant timescales and length scales of their nanoscale and mesoscale dynamics, self-assembly, and mesostructure evolution. In this work, we conduct in operando studies of continuous-flow direct writing with colloidal inks, focusing on how the ink formulation and ink-substrate interactions affect the processes that determine the macroscopic properties of the printed materials. We find fundamental differences in the ink structural relaxations emerging from the primary colloid properties (monodisperse versus aggregated colloids) and the substrates surface energy and mechanical properties. Our work helps to reveal and quantify the basic science governing the evolution of 3D-printed materials during processing, ultimately improving engineering criteria for the design of printable materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Non-conformal attractor in boost-invariant plasmas

We study the dissipative evolution of (0+1)-dimensionally expanding media with Bjorken symmetry using the Boltzmann equation for massive particles in relaxation-time approximation. Breaking conformal symmetry by a mass induces a non-zero bulk viscous pressure in the medium. It is shown that even a small mass (in units of the local temperature) drastically modifies the well-known attractor for the shear Reynolds number previously observed in massless systems. For generic nonzero particle mass, neither the shear nor the bulk viscous pressure relax quickly to a non-equilibrium attractor; they approach the hydrodynamic limit only late, at small values of the inverse Reynolds numbers. Only the longitudinal pressure, which is a combination of thermal, shear and bulk viscous pressures, continues to show early approach to a far-off-equilibrium attractor, driven by the rapid longitudinal expansion at early times. Second-order dissipative hydrodynamics based on a gradient expansion around locally isotropic thermal equilibrium fails to reproduce this attractor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Low-Rate Cycling Regeneration Sustains NMC811–Graphite Battery Performance through Extreme Ultrafast Charging

Urban air mobility (UAM) systems, such as electric vertical takeoff and landing (eVTOL) aircraft, require batteries capable of extreme ultrafast charging to support high-frequency operations. Here, in this work, we evaluate the electrochemical stability of NMC811–graphite full cells using a complex mixed-modal protocol designed to simulate the aggressive turnaround demands of UAM missions. We demonstrate that incorporating a periodic low-rate (0.3C) “regeneration” cycle enables cells to maintain 96% capacity retention over 900 cycles, despite repeated exposure to ultrafast pulses. To validate the efficacy of this regeneration mechanism, we performed simplified control experiments comparing continuous 10C charging against a 10C–0.3C interleaved protocol. Advanced characterization reveals that while mechanical particle fracture is pervasive at these rates, the regeneration cycles decelerate the electrochemical degradation by resolving spatially heterogeneous Ni oxidation states and relaxing lithium-ion concentration gradients. These findings provide a vital mechanistic framework for battery operation, proving that restorative charging can effectively delay and mitigate failure in demanding UAM applications.

batteries↗

DOE OSTI2022

Thermal Neutron Scattering Law for Beryllium Hydride and Critical Mass Calculations [Slides]

TSLs for H(BeH 2 ) and Be(BeH 2 ) were evaluated in the incoherent approximation using FLASSH. Minimum critical mass estimates were performed using MC21 continuous energy Monte Carlo calculations with the BeH 2 TSLs. Researchers confirmed very low estimated critical mass for BeH 2 -moderated and Be- reflected spheres. These were the lowest critical masses NNL has studied to date. Future work includes relaxation of the incoherent approximation for Be(BeH 2 ). A small increase in critical mass is expected due to increased neutron transmission at sub-Bragg cutoff energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1987

Enhancements to Program LAURA for computation of three-dimensional hypersonic flow

Changes to Program Laura (Langley Aerothermodynamic Upwind Relaxation Algorithm) are presented which enhance both stability and accuracy of the algorithm. A discussion of iteration/sweeping strategies and their relation to computer architectures is included to best exploit the capabilities of serial, vector, and parallel processor machines. Test cases for Mach 10 perfect gas flow and Mach 32 real gas flow in chemical nonequilibrium over a blunt, raked elliptic cone using the thin-layer Navier-Stokes equations are presented in order to demonstrate the current improved capabilities. Algorithm changes include the use of volume averaging, application of a symmetric total variation diminishing (TVD) scheme, and stronger interaction between the grid/shock alignment routine and the relaxation algorithm. Good comparisons with heat transfer and pitching moment data at three different angles of attack for the Mach 10 tests serve to further validate the present algorithm. Parameters are defined which control the coupling of the specie continuity equations with the solution of the mixture conservation equations. A discussion of the consequences involved in the choice of strong versus weak coupling is presented, and a sample nonequilibrium calculation on a fine grid over a full scale model of the Aeroassist Flight Experiment (AFE) demonstrates current capabilities.

Gnoffo, Peter A.↗

NASA NTRS1990

An implicit finite element method for high speed flows

A fast algorithm is presented for constructing continuous lines, consisting of element sides, on general unstructured two-dimensional triangular meshes. The lines must pass through each node of the mesh once and only once. The discussion focuses on the use of these lines in a relaxation method for the solution of the equation system arising from an implicit algorithm for the solution of two-dimensional Euler and Navier-Stokes equations on general unstructured grids. It is also shown that the method can be used for solving three-dimensional Navier-Stokes equations on a grid composed of both structured and unstructured regions.

Hassan, O.↗

NASA NTRS1987

Incompressible Navier-Stokes solutions for a sharp-edged double-delta wing

An implicit finite-difference scheme is used to compute the incompressible laminar vortical flow around a double-delta wing with an aspect ratio of 2.06. By adding a time derivative of the pressure to the continuity equation, the unsteady incompressible Navier-Stokes equations can be integrated like a conventional parabolic time-dependent system of equations. The flux-difference split scheme combines approximate factorization in crossflow planes with a symmetric planar Gauss-Seidel relaxation in the remaining spatial direction. The trajectory of the vortical core is well predicted in comparison with experimental data.

Hsu, Chung-Hao↗

NASA NTRS2001

Compatibility Testing of Non-Metallic Materials for the Urine Processor Assembly (UPA) of International Space Station (ISS)

In the International Space Station (ISS), astronauts will convert urine into potable water with the Urine Processor Assembly (UPA). The urine is distilled, with the concentrated form containing about 15% brine solids, and the dilute form as a blend of pre-treated urine/wastewater. Eighteen candidate non-metallic materials for use with the UPA were tested in 2000 for compatibility with the concentrated and dilute urine solutions for continuous times of at least 30 days, and at conditions of 0.5 psia pressure and 100 F, to simulate the working UPA environment. A primary screening test for each material (virgin and conditioned) was dynamic mechanical analysis (DMA) in the stress relaxation mode, with the test data used to predict material performance for a 10-year use in space. Data showed that most of the candidate materials passed the compatibility testing, although a few significant changes in stress relaxation modulus were observed.

Wingard, Charles Doug↗

DOE OSTI2023

Does a Quark-Gluon Plasma Feature an Extended Hydrodynamic Regime?

Here we investigate the response of the near-equilibrium quark-gluon plasma (QGP) to perturbation at nonhydrodynamic gradients. We propose a conceivable scenario under which sound mode continues to dominate the medium response in this regime. Such a scenario has been observed experimentally for various liquids and liquid metals. We further show that this extended hydrodynamic regime (EHR) indeed exists for both the weakly coupled kinetic equation in the relaxation time approximation (RTA) and the strongly coupled $\mathcal{N}$ = 4 supersymmetric Yang-Mills (SYM) theory. We construct a simple but nontrivial extension of Müller-Israel-Stewart (MIS) theory—namely MIS*—and demonstrate that it describes the EHR response for both the RTA and SYM theory. This indicates that MIS* equations can potentially be employed to search for QGP EHR via heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Super-relaxed myosins contribute to respiratory muscle hibernation in mechanically ventilated patients

Patients receiving mechanical ventilation in the intensive care unit (ICU) frequently develop contractile weakness of the diaphragm. Consequently, they may experience difficulty weaning from mechanical ventilation, which increases mortality and poses a high economic burden. Because of a lack of knowledge regarding the molecular changes in the diaphragm, no treatment is currently available to improve diaphragm contractility. We compared diaphragm biopsies from ventilated ICU patients (N= 54) to those of non-ICU patients undergoing thoracic surgery (N= 27). By integrating data from myofiber force measurements, x-ray diffraction experiments, and biochemical assays with clinical data, we found that in myofibers isolated from the diaphragm of ventilated ICU patients, myosin is trapped in an energy-sparing, super-relaxed state, which impairs the binding of myosin to actin during diaphragm contraction. Studies on quadriceps biopsies of ICU patients and on the diaphragm of previously healthy mechanically ventilated rats suggested that the super-relaxed myosins are specific to the diaphragm and not a result of critical illness. Exposing slow- and fast-twitch myofibers isolated from the diaphragm biopsies to small-molecule compounds activating troponin restored contractile force in vitro. These findings support the continued development of drugs that target sarcomere proteins to increase the calcium sensitivity of myofibers for the treatment of ICU-acquired diaphragm weakness.

Cell Biology↗

NASA NTRS2002

Intricacies of Using Kevlar Cord and Thermal Knives in a Deployable Release System: Issues and Solutions

The utilization of Kevlar cord and thermal knives in a deployable release system produces a number of issues that must be addressed in the design of the system. This paper proposes design considerations that minimize the major issues, thermal knife failure, Kevlar cord relaxation, and the measurement of the cord tension. Design practices can minimize the potential for thermal knife laminate and element damage that result in failure of the knife. A process for in-situ inspection of the knife with resistance, rather than continuity, checks and 10x zoom optical imaging can detect damaged knives. Tests allow the characterization of the behavior of the particular Kevlar cord in use and the development of specific prestretching techniques and initial tension values needed to meet requirements. A new method can accurately measure the tension of the Kevlar cord using a guitar tuner, because more conventional methods do not apply to arimid cords such as Kevlar.

Stewart, Alphonso↗

NASA NTRS2002

Intricacies of Using Kevlar and Thermal Knives in a Deployable Release System: Issues and Solutions

The utilization of Kevlar cord and thermal knives in a deployable release system produces a number of issues that must be addressed in the design of the system. This paper proposes design considerations that minimize the major issues, thermal knife failure, Kevlar cord relaxation, and the measurement of the cord tension. Design practices can minimize the potential for thermal knife laminate and element damage that result in failure of the knife. A process for in-situ inspection of the knife with resistance, rather than continuity, checks and 10x zoom optical imaging can detect damaged knives. Tests allow the characterization of the behavior of the particular Kevlar cord in use and the development of specific pre-stretching techniques and initial tension values needed to meet requirements. A new method can accurately measure the tension of the Kevlar cord using a guitar tuner, because more conventional methods do not apply to arimid cords such as Kevlar.

Stewart, Alphonso C.↗