Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Kinetic-energy dissipation and fluctuations in strongly damped heavy-ion collisions within the stochastic mean-field approach

Microscopic mean-field approaches have been successful in describing the most probable reaction outcomes in low-energy heavy-ion reactions. However, those approaches are known to severely underestimate dispersions of observables around the average values that has limited their applicability. Recently it has been shown that a quantal transport approach based on the stochastic mean-field (SMF) theory significantly improves the description, while its application has been limited so far to fragment mass and charge dispersions. In this work, we extend the quantal transport approach based on the SMF theory for relative kinetic energy dissipation and angular momentum transfer in low-energy heavy-ion reactions. Based on the SMF concept, analytical expressions are derived for the radial and tangential friction and associated diffusion coefficients. Those quantal transport coefficients are calculated microscopically in terms of single-particle orbitals within the time-dependent Hartree-Fock (TDHF) approach. As the first application of the proposed formalism, we consider the radial linear momentum dispersion, neglecting the coupling between radial and angular momenta. We analyze the total kinetic energy (TKE) distribution of binary reaction products in the 136 Xe + 208 Pb reaction at E c.m. =526 MeV and compare with experimental data. From time evolution of single-particle orbitals in TDHF, the radial diffusion coefficient is computed on a microscopic basis, while a phenomenological treatment is introduced for the radial friction coefficient. By solving the quantal diffusion equation for the radial linear momentum, the dispersion of the radial linear momentum is obtained, from which one can construct the TKE distribution. We find that the calculations provide a good description of the TKE distribution for strongly damped events with large energy losses, TKEL ≳ 150 MeV. However, the calculations underestimate the TKE distribution for smaller energy losses. Further studies are needed to improve the technical details of calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Remote Power Distribution Prototyping for Bergoz ACCT

The objective of this project focuses on the design and construction of remote power distribution to the Bergoz ACCT amplifier module. Responsibilities included designing a prototype amplifier placeholder using SketchUp, 3D printing it using PrusaSlicer, and mounting the placeholder inside a junction box with 35 mm DIN rail. Wiring was run through a penetration in a wall inside the accelerator building to the Tevatron to keep all electronics outside the radioactive enclosure. A Power over Ethernet switch was set up for remote power distribution to the amplifier. This project ensures that the amplifier module can be effectively integrated and managed within Fermilab's infrastructure once it is procured.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

PREDOMINANTLY LOW METALLICITIES MEASURED IN A STRATIFIED SAMPLE OF LYMAN LIMIT SYSTEMS AT Z = 3.7

We measured metallicities for 33 z = 3.4–4.2 absorption line systems drawn from a sample of H i-selected-Lyman limit systems (LLSs) identified in Sloan Digital Sky Survey (SDSS) quasar spectra and stratified based on metal line features. We obtained higher-resolution spectra with the Keck Echellette Spectrograph and Imager, selecting targets according to our stratification scheme in an effort to fully sample the LLS population metallicity distribution. We established a plausible range of H i column densities and measured column densities (or limits) for ions of carbon, silicon, and aluminum, finding ionization-corrected metallicities or upper limits. Interestingly, our ionization models were better constrained with enhanced α -to-aluminum abundances, with a median abundance ratio of [ α /Al] = 0.3. Measured metallicities were generally low, ranging from [M/H] = −3 to −1.68, with even lower metallicities likely for some systems with upper limits. Using survival statistics to incorporate limits, we constructed the cumulative distribution function (CDF) for LLS metallicities. Recent models of galaxy evolution propose that galaxies replenish their gas from the low-metallicity intergalactic medium (IGM) via high-density H i “flows” and eject enriched interstellar gas via outflows. Thus, there has been some expectation that LLSs at the peak of cosmic star formation ( z ≈ 3) might have a bimodal metallicity distribution. We modeled our CDF as a mix of two Gaussian distributions, one reflecting the metallicity of the IGM and the other representative of the interstellar medium of star-forming galaxies. This bimodal distribution yielded a poor fit. A single Gaussian distribution better represented the sample with a low mean metallicity of [M/H] ≈ −2.5.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1976

Test particle propagation in magnetostatic turbulence. 1. Failure of the diffusion approximation

The equation which governs the quasi-linear approximation to the ensemble and gyro-phase averaged one-body probability distribution function is constructed from first principles. This derived equation is subjected to a thorough investigation in order to calculate the possible limitations of the quasi-linear approximation. It is shown that the reduction of this equation to a standard diffusion equation in the Markovian limit can be accomplished through the application of the adiabatic approximation. A numerical solution of the standard diffusion equation in the Markovian limit is obtained for the narrow parallel beam injection. Comparison of the diabatic and adiabatic results explicitly demonstrates the failure of the Markovian description of the probability distribution function. Through the use of a linear time-scale extension the failure of the adiabatic approximation, which leads to the Markovian limit, is shown to be due to mixing of the relaxation and interaction time scales in the presence of the strong mean field.

Klimas, A. J.↗
NASA NTRS2024

Double Power-law Formation by Sequential Particle Acceleration

Spectral double power laws are common in solar high-energy phenomena such as flares and interplanetary energetic-electron events. However, the physical mechanism that produces the changes in power-law index within a single spectrum is unclear. We developed a fully analytical method of forming single power-law spectra from sequential acceleration of particles orbiting inside and hopping between simulated large-scale magnetic islands formed by flare reconnection. Here, we extend the analytical method to the formation of double power-law spectra by assuming sequential acceleration in two successive regions with different acceleration and particle-transport rates. The resulting spectral distribution is continuous and smooth, with a flattening at low energies, two power-law regions at mid-energies, and a steep rollover at high energies. The model provides analytical expressions for the spectral indices, all energy breaks, and normalization constants as functions of just three physical parameters of each acceleration region: (1) the energy gain in each accelerator, (2) the percentage of particles transferred between accelerators, and (3) the number of accelerators visited. One of the most salient predictions of our work is that the spectral index at high (low) energies is determined by the parameters of the first "seed" (second) acceleration region. By constructing the spectral distribution through an iterative analytical process, the evolution toward a double power law is easily characterized and explained. Our analytical model provides tools to interpret space- and ground-based observations from RHESSI, FOXSI, NuSTAR, Solar Orbiter/STIX, EOVSA, and future high-energy missions.

Solar flares↗
DOE OSTI2025

Merged aerosol size distribution from SMPS and OPC for SAIL

This dataset contains merged aerosol number size distribution data for the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign. The merged size distribution data were constructed by combining measurements from a scanning-mobility particle sizer (SMPS) and an optical particle counter (OPC), covering a size range of 0.01–35 µm. The merging methodology follows the approach described by Hand and Kreidenweis (2002) and Marinescu et al. (2019). All aerosol data from the ARM archive were corrected to standard temperature (273.15 K) and pressure (101.3 kPa).

merged size distribution↗
NASA NTRS2019

Spectral Polarization Distribution Models (PDMs) for NASA CLARREO Pathfinder’s Inter-Calibration Applications

Solar radiation scattered by Earth surfaces of various scene types such as oceans, deserts, tree leaves etc and atmospheric molecules and particles is polarized and the amount of polarization depends on the surface composition and particle physical properties. This can be a source of measurement errors in satellite data if a non-polarimetric radiometric sensor is sensitive to the polarization state of light. To obtain highly accurate spectral solar radiation data from the Earth-atmosphere system for the space-borne inter-calibration studies as proposed in NASA's Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission and the CLARREO Pathfinder (CPF) mission, the spectral polarization state of the reflected solar light at the top of atmosphere (TOA) must be known with sufficient accuracy. The degree of polarization (DOP) and the angle of linear polarization (AOLP) of the light at the TOA as functions of incident and viewing geometry and scene type construct the Polarization Distribution Models (PDMs) for correction of polarization-induced error of satellite data. In this work, algorithms for modeling the spectral polarization state of reflected sunlight from various types of Earth, including oceans, deserts, vegetated land surfaces and these scene types with all kinds of clouds, are developed. By comparing the model results with the PARASOL satellite data, our numerical results demonstrate that the model can provide a reliable approach for making the spectral PDMs for wavelengths between 320 and 2300 nm for satellite inter-calibration applications as proposed in the CLARREO and the CLARREO CPF missions.

Sun, Wenbo↗
DOE OSTI2025

Coupling magnons to an opto-electronic parametric oscillator

Hybrid magnonic systems have emerged as versatile modular components for quantum signal transduction and sensing applications owing to their capability of connecting distinct quantum platforms. To date, the majority of the magnonic systems have been explored in a local, near-field scheme, due to the close proximity required for realizing a strong coupling between magnons and other excitations. This constraint greatly limits the applicability of magnons in developing remotely coupled, distributed quantum network systems. On the contrary, opto-electronic architectures hosting self-sustained oscillations have been a unique platform for long-haul signal transmission and processing. Here, we integrated an opto-electronic oscillator with a magnonic oscillator consisting of a microwave waveguide and a Y 3 Fe 5 O 12 (YIG) sphere, and demonstrated strong and coherent coupling between YIG’s magnon modes and the opto-electronic oscillator’s characteristic photon modes—revealing the hallmark anti-crossing gap in the measured spectrum. In particular, the photon mode is produced on-demand via a nonlinear, parametric process as stipulated by an external seed pump. Both the internal cavity phase and the external pump phase can be precisely tuned to stabilize either degenerate or nondegenerate auto-oscillations. Our result lays out a new, hybrid platform for investigating the long-distance coupling and nonlinearity in coherent magnonic phenomena, which may be found useful in constructing the future “distributed hybrid magnonic systems.”

36 MATERIALS SCIENCE↗
NASA NTRS2013

RUSHMAPS: Real-Time Uploadable Spherical Harmonic Moment Analysis for Particle Spectrometers

RUSHMAPS is a new onboard data reduction scheme that gives real-time access to key science parameters (e.g. moments) of a class of heliophysics science and/or solar system exploration investigation that includes plasma particle spectrometers (PPS), but requires moments reporting (density, bulk-velocity, temperature, pressure, etc.) of higher-level quality, and tolerates a lowpass (variable quality) spectral representation of the corresponding particle velocity distributions, such that telemetry use is minimized. The proposed methodology trades access to the full-resolution velocity distribution data, saving on telemetry, for real-time access to both the moments and an adjustable-quality (increasing quality increases volume) spectral representation of distribution functions. Traditional onboard data storage and downlink bandwidth constraints severely limit PPS system functionality and drive cost, which, as a consequence, drives a limited data collection and lower angular energy and time resolution. This prototypical system exploit, using high-performance processing technology at GSFC (Goddard Space Flight Center), uses a SpaceCube and/or Maestro-type platform for processing. These processing platforms are currently being used on the International Space Station as a technology demonstration, and work is currently ongoing in a new onboard computation system for the Earth Science missions, but they have never been implemented in heliospheric science or solar system exploration missions. Preliminary analysis confirms that the targeted processor platforms possess the processing resources required for realtime application of these algorithms to the spectrometer data. SpaceCube platforms demonstrate that the target architecture possesses the sort of compact, low-mass/power, radiation-tolerant characteristics needed for flight. These high-performing hybrid systems embed unprecedented amounts of onboard processing power in the CPU (central processing unit), FPGAs (field programmable gate arrays), and DSP (digital signal processing) elements. The fundamental computational algorithm de constructs 3D velocity distributions in terms of spherical harmonic spectral coefficients (which are analogous to a Fourier sine-cosine decomposition), but uses instead spherical harmonics Legendre polynomial orthogonal functions as a basis for the expansion, portraying each 2D angular distribution at every energy or, geometrically, spherical speed-shell swept by the particle spectrometer. Optionally, these spherical harmonic spectral coefficients may be telemetered to the ground. These will provide a smoothed description of the velocity distribution function whose quality will depend on the number of coefficients determined. Successfully implemented on the GSFC-developed processor, the capability to integrate the proposed methodology with both heritage and anticipated future plasma particle spectrometer designs is demonstrated (with sufficiently detailed design analysis to advance TRL) to show specific science relevancy with future HSD (Heliophysics Science Division) solar-interplanetary, planetary missions, sounding rockets and/or CubeSat missions.

Figueroa-Vinas, Adolfo↗
NASA NTRS2015

High-Order Hyperbolic Residual-Distribution Schemes on Arbitrary Triangular Grids

In this paper, we construct high-order hyperbolic residual-distribution schemes for general advection-diffusion problems on arbitrary triangular grids. We demonstrate that the second-order accuracy of the hyperbolic schemes can be greatly improved by requiring the scheme to preserve exact quadratic solutions. We also show that the improved second-order scheme can be easily extended to third-order by further requiring the exactness for cubic solutions. We construct these schemes based on the LDA and the SUPG methodology formulated in the framework of the residual-distribution method. For both second- and third-order-schemes, we construct a fully implicit solver by the exact residual Jacobian of the second-order scheme, and demonstrate rapid convergence of 10-15 iterations to reduce the residuals by 10 orders of magnitude. We demonstrate also that these schemes can be constructed based on a separate treatment of the advective and diffusive terms, which paves the way for the construction of hyperbolic residual-distribution schemes for the compressible Navier-Stokes equations. Numerical results show that these schemes produce exceptionally accurate and smooth solution gradients on highly skewed and anisotropic triangular grids, including curved boundary problems, using linear elements. We also present Fourier analysis performed on the constructed linear system and show that an under-relaxation parameter is needed for stabilization of Gauss-Seidel relaxation.

Mazaheri, Alireza↗
DOE OSTI2018

An Empirical Model of Radiation Belt Electron Pitch Angle Distributions Based On Van Allen Probes Measurements

Based on over 4 years of Van Allen Probes measurements, an empirical model of radiation belt electron equatorial pitch angle distribution (PAD) is constructed here. The model, developed by fitting electron PADs with Legendre polynomials, provides the statistical PADs as a function of L-shell (L = 1–6), magnetic local time, electron energy (~30 keV to 5.2 MeV), and geomagnetic activity (represented by the Dst index) and is also the first empirical PAD model in the inner belt and slot region. For megaelectron volt electrons, model results show more significant day-night PAD asymmetry of electrons with higher energies and during disturbed times, which is caused by geomagnetic field configuration and flux radial gradient changes. Steeper PADs with higher fluxes around 90° pitch angle and lower fluxes at lower pitch angles for higher-energy electrons and during active times are also present, which could be due to electromagnetic ion cyclotron wave scattering. For hundreds of kiloelectron volt electrons, cap PADs are generally present in the slot region during quiet times and their energy-dependent features are consistent with hiss wave scattering, while during active times, cap PADs are less significant especially at outer part of slot region, which could be due to the complex energizing and transport processes. Finally, the 90°-minimum PADs are persistently present in the inner belt and appear in the slot region during active times, and minima at 90° pitch angle are more significant for electrons with higher energies, which could be a critical evidence in identifying the underlying physical processes responsible for the formation of 90°-minimum PADs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Investigation of liquid cloud microphysical properties of deep convective systems: 1. Parameterization raindrop size distribution and its application for stratiform rain estimation

Abstract To investigate liquid‐phase ( T > 3°C) cloud and precipitation microphysical properties within Deep Convective Systems (DCSs), eight DCS cases sampled by the University of North Dakota Citation II research aircraft during Midlatitude Continental Convective Clouds Experiment were selected. A full spectrum of raindrop size distribution (DSD) was constructed from 120 µm to 4000 µm through a combination of two‐dimensional cloud probe (120 to 900 µm) and High Volume Precipitation Spectrometer (900 to 4000 µm) data sets. A total of 1126 five second DSDs have been used to fit to Gamma and Exponential functions within the stratiform rain (SR) regions of DCSs. The Gamma shape μ Γ and slope λ Γ parameters are then compared with those derived from surface disdrometer measurements. The similar μ Γ ‐ λ Γ relationships but different μ Γ and λ Γ value ranges from two independent platforms at different elevations may represent the real nature of DSD shape information in clouds and at the surface. To apply the exponentially fitted DSD parameters to precipitation estimation using Next Generation Weather Radar (NEXRAD) radar reflectivity factor Z e , the terms N 0 E and λ E have been parameterized as a function of Z e using an empirical N 0 E ‐ λ E relationship. The averaged SR rain rate retrieved from this study is almost identical to the surface measurements, while the NEXRAD Q2 precipitation is twice as large. The comparisons indicate that the new DSD parameterization scheme is robust, while the Q2 SR precipitation estimation based on Marshall‐Palmer Z‐R relationship, where a constant DSD intercept parameter ( N 0 E ) was assumed, needs to be improved for heavy precipitation cases.

Wang, Jingyu↗
DOE OSTI2023

Parameter estimation with maximal updated densities

A recently developed measure-theoretic framework solves a stochastic inverse problem (SIP) for models where uncertainties in model output data are predominantly due to aleatoric (i.e., irreducible) uncertainties in model inputs (i.e., parameters). The subsequent inferential target is a distribution on parameters. Another type of inverse problem is to quantify uncertainties in estimates of “true” parameter values under the assumption that such uncertainties should be reduced as more data are incorporated into the problem, i.e., the uncertainty is considered epistemic. A major contribution of this work is the formulation and solution of such a parameter identification problem (PIP) within the measure-theoretic framework developed for the SIP. The approach is novel in that it utilizes a solution to a stochastic forward problem (SFP) to update an initial density only in the parameter directions informed by the model output data. In other words, this method performs “selective regularization” only in the parameter directions not informed by data. Further, the solution is defined by a maximal updated density (MUD) point where the updated density defines the measure-theoretic solution to the PIP. Another significant contribution of this work is the full theory of existence and uniqueness of MUD points for linear maps with Gaussian distributions. Data-constructed Quantity of Interest (QoI) maps are also presented and analyzed for solving the PIP within this measure-theoretic framework as a means of reducing uncertainties in the MUD estimate. We conclude with a demonstration of the general applicability of the method on two problems involving either spatial or temporal data for estimating uncertain model parameters. The first problem utilizes spatial data from a stationary partial differential equation to produce a MUD estimate of an uncertain boundary condition. The second problem utilizes temporal data obtained from the state-of-the-art ADvanced CIRCulation (ADCIRC) model to obtain a MUD estimate of uncertain wind drag coefficients for a simulated extreme weather event near the Shinnecock Inlet located in the Outer Barrier of Long Island, NY, USA.

42 ENGINEERING↗
DOE OSTI2021

An unsupervised machine-learning checkpoint-restart algorithm using Gaussian mixtures for particle-in-cell simulations

We propose an unsupervised machine-learning checkpoint-restart (CR) algorithm for particle-in-cell (PIC) algorithms using Gaussian mixtures (GM). The algorithm compresses the particle population per spatial cell by constructing a velocity distribution function using GM. Particles are reconstructed at restart time by local resampling of the Gaussians. To guarantee fidelity of the CR process, we ensure the exact preservation of invariants such as charge, momentum, and energy for both compression and reconstruction stages, everywhere on the mesh. We also ensure the preservation of Gauss' law after particle reconstruction by exactly matching the density profile at restart time. As a result, the GM CR algorithm is shown to provide a clean, conservative restart capability while potentially affording orders of magnitude savings in input/output requirements. Here, we demonstrate the algorithm using a recently developed exactly energy- and charge-conserving PIC algorithm using both electrostatic and electromagnetic tests. The tests demonstrate not only a high-fidelity CR capability, but also its potential for enhancing the fidelity of the PIC solution for a given particle resolution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Aluminum hydroxide-mediated synthesis of mesoporous metal oxides by a mechanochemical nanocasting strategy

Mesoporous metal oxides (MOs) have attracted significant interest in heterogeneous catalysis due to their wide pore size distribution and high pore volume. In this work, we present a facile mechanochemical nanocasting strategy using aluminum hydroxide as the mesoporous structure-directing agent, which overcomes the drawbacks associated with wet template-assisted methods. In this procedure, by simply grinding a mixture of commercial aluminum hydroxide and MO precursors, a series of mesoporous MOs with high specific surface areas and narrow pore size distributions have been constructed in a short time (e.g., Fe 2 O 3 , 280 m 2 g –1 ; Co 3 O 4 , 155 m 2 g –1 ; CeO 2 , 192 m 2 g –1 ; ZrO 2 , 170 m 2 g –1 ; CuO x –CeO y , 177 m 2 g –1 ; FeO x –CeO y , 170 m 2 g –1 ; CoO x –CuO y –CeO z , 154 m 2 g –1 ; CoO x –FeO y –CeO z , 133 m 2 g –1 ). It is expected that this strategy may open up new opportunities for fabricating a number of advanced porous materials with abundant porosity in the near future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Kinetic simulations of collision-less plasmas in open magnetic geometries

Laboratory plasmas in open magnetic geometries can be found in many different applications such as (a) scrape-of-layer (SOL) and divertor regions in toroidal confinement fusion devices, (b) linear divertor simulators, (c) plasma-based thrusters and (d) magnetic mirrors etc. A common feature of these plasma systems is the need to resolve, in addition to velocity space, at least one physical dimension (e.g. along flux lines) to capture the relevant physics. In general, this requires a kinetic treatment. Fully kinetic particle-in-cell (PIC) simulations can be applied but at the expense of large computational effort. A common way to resolve this is to use a hybrid approach: kinetic ions and fluid electrons. In the present work, the development of a hybrid PIC computational tool suitable for open magnetic geometries is described which includes (a) the effect of non-uniform magnetic fields, (b) finite fully-absorbing boundaries for the particles and (c) volumetric particle sources. Analytical expressions for the momentum transport in the paraxial limit are presented with their underlying assumptions and are used to validate the results from the PIC simulations. A general method is described to construct discrete particle distribution functions in a state of mirror-equilibrium. This method is used to obtain the initial state for the PIC simulation. Collisionless simulations in a mirror geometry are performed. The results show that the effect of magnetic compression is correctly described and momentum is conserved. The self-consistent electric field is calculated and is shown to modify the ion velocity distribution function in a manner consistent with analytic theory. Based on this analysis, the ion distribution function is understood in terms of a loss-cone distribution and an isotropic Maxwell-Boltzmann distribution driven by a volumetric plasma source. Finally, the inclusion of a Monte Carlo based Fokker-Planck collision operator is discussed in the context of future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Elemental and lattice-parameter mapping of binary oxide superlattices of (LaNiO 3 ) 4 /(LaMnO 3 ) 2 at atomic resolution

We construct the elemental distribution and lattice strain maps from the measured atomic column positions in a (LaNiO3)(4)/(LaMnO3)(2) superlattice over a large field of view. The correlation between the distribution of B-cations and the lattice parameter in the form of Vegard's law is validated using atomic resolution energy dispersive x-ray spectroscopy (EDS). The maps show negligible Mn intermixing in the LaNiO3 layer, while Ni intermixing in the LaMnO3 layer improves away from the substrate interface to 9.5 atomic% from the 8th period onwards, indicating that the superlattice interfacial sharpness is established as the distance from the substrate increases. The maps allow an observation of the compositional defects of the B-sites, which is not possible by Z-contrast alone. Thus, this study demonstrates a promising approach for atomic scale correlative study of lattice strain and composition, and a method for the calibration of atomic resolution EDS maps.

composition↗
DOE OSTI2021

Normalizing Flows for Microscopic Many-Body Calculations: An Application to the Nuclear Equation of State

We report that normalizing flows are a class of machine learning models used to construct a complex distribution through a bijective mapping of a simple base distribution. We demonstrate that normalizing flows are particularly well suited as a Monte Carlo integration framework for quantum many-body calculations that require the repeated evaluation of high-dimensional integrals across smoothly varying integrands and integration regions. As an example, we consider the finite-temperature nuclear equation of state. An important advantage of normalizing flows is the ability to build highly expressive models of the target integrand, which we demonstrate enables precise evaluations of the nuclear free energy and its derivatives. Furthermore, we show that a normalizing flow model trained on one target integrand can be used to efficiently calculate related integrals when the temperature, density, or nuclear force is varied. This work will support future efforts to build microscopic equations of state for numerical simulations of supernovae and neutron star mergers that employ state-of-the-art nuclear forces and many-body methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗