Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental phasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Collaborative or competitive phase transformation processes in an additively manufactured-maraging steel M300

Although retained austenite is present in minor amounts in as-built additively manufactured-maraging steels, its evolution during ageing is key to controlling the final microstructure. This study investigates the relationship between austenite reversion and precipitation evolution during ageing, particularly whether these processes compete or cooperate. Using Scanning/Transmission Electron Microscopy, Atom Probe Tomography and Thermo-Calc® PRISMA simulations, the presence and evolution of retained austenite, Ni 3 Ti and Fe 7 Mo 6 intermetallic phases was characterised across different ageing conditions. Experimental results revealed the presence of non-enriched austenite in the as-built condition. Nevertheless, with increasing ageing temperature, Ni and Mo segregation became evident. High-Resolution Transmission Electron Microscopy revealed that Ni 3 Ti precipitation primarily occurred within the martensitic matrix, while Fe 7 Mo 6 nucleated preferentially at the austenite-martensite interface. PRISMA simulations indicated early and rapid precipitation in solute-enriched areas (i.e., intercellular regions), with Ni 3 Ti forming prior to Fe 7 Mo 6 . Both experimental and simulation results suggested Ni diffusion controls retained austenite growth, while Ti and Mo drive Ni 3 Ti and Fe 7 Mo 6 precipitation, respectively. The evidence reported in this work supports a both collaborative and independent phase transformation mechanism, where austenite reversion and precipitation co-evolve.

42 ENGINEERING↗
DOE OSTI2025

Multi-modal characterization of the B2 phase in the Ta-Re binary system

The energy and transportation industries demand materials that retain their mechanical property at high temperatures. Refractory complex concentrated alloys (RCCAs) with a BCC + B2 microstructure offer a potential solution, where maintaining the high temperature mechanical properties can be achieved by precipitation strengthening. This depends on the B2 phase in RCCAs being thermodynamically stable with a high solvus temperature. Recently, we predicted the high temperature stability of the B2 structure in the Ta-Re binary system, using density functional theory. Here, in this study, we provide experimental evidence for the existence of this phase for the first time, using a Ta 65 Re 35 alloy. Despite Ta-Re binary phase diagrams predicting a single-phase BCC microstructure for Ta 65 Re 35 , we show that a high Z nanoscale secondary phase appears after heat treatment at 1550 °C and 1100 °C. Scanning transmission electron microscopy (STEM) revealed that this phase has a cubic structure and is equiatomic TaRe though B2 superlattice reflections were absent in fast Fourier transforms (FFT) and diffraction patterns (DPs). DP simulations indicate that the B2 TaRe superlattice reflections are up to two orders of magnitude weaker than their fundamental reflections, making their detection challenging via electron microscopy. Neutron diffraction confirmed the second phase had a B2 structure. This study identified a previously unobserved high temperature stable B2 phase in the Ta-Re system, enabling the development of new high temperature BCC + B2 RCCAs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Anomalous Spin‐Optical Helical Effect in Ti‐Based Kagome Metal

The kagome lattice stands as a rich platform for hosting a wide array of correlated quantum phenomena, ranging from charge density waves and superconductivity to electron nematicity and loop current states. Direct detection of loop currents in kagome systems has remained a formidable challenge due to their intricate spatial arrangements and the weak magnetic field signatures they produce, and this has made their identification experimentally subtle. This has left their existence and underlying mechanisms a topic of intense debate. In this work, we uncover signatures compatible with loop currents: spin handedness-selective signals that surpass conventional dichroic, spin, and spin-dichroic responses. We observe this phenomenon in the kagome metal CsTi 3 ⁢Bi 5 and we call it the anomalous spin-optical helical effect. This effect arises from the coupling of light's helicity with spin-orbital electron correlations, thereby providing an indirect yet sensitive approach to probe loop-current–related electronic correlations in quantum materials. Our discovery not only enriches the debate surrounding loop currents but also offers new experimental strategies to exploit the electronic phases of quantum materials via light–matter interaction.

anomalous spin-optical helical effect↗
DOE OSTI2026

A robust alloy design (RAD) strategy for next-generation (IV) nuclear fission reactors

Next-generation nuclear reactors demand structural materials capable of withstanding extreme conditions, including high temperatures, intense neutron flux, and corrosive environments. Multi-Principal Element Alloys (MPEAs) have emerged as promising candidates due to their exceptional radiation tolerance, thermal stability, and compositional flexibility. This study introduces a versatile and customizable Robust Alloy Design (RAD) strategy for systematically designing MPEAs for GEN-IV reactor fuel cladding. The RAD framework integrates nuclear-relevant selection criteria, empirical parameter assessments, and high-throughput CALPHAD simulations to efficiently narrow compositional space and identify stable alloys. A unified RAD score developed for the first time, combines key performance metrics, including fuel-clad chemical interaction (FCCI), neutron absorption cross-section (NAC), valence electron configuration (VEC), and melting point factor (MPF), into a flexible ranking system adaptable to reactor-specific priorities. Among 724 candidates, V555(5Al–5Cr–5Fe–85V) emerged as the top alloy, validated experimentally with a homogeneous single-phase BCC microstructure and superior mechanical properties (nano-indentation: 3.389 ± 0.258 GPa; Vickers hardness: 240 ± 6.7 HV), significantly outperforming Zircaloy-4 and V-4Cr-4Ti. Importantly, the RAD strategy is not limited to nuclear applications; its customizable weighting system enables scalability to other extreme environments. This adaptability positions RAD strategy as a versatile tool for advanced materials design across multiple industries.

Alloy design↗
DOE OSTI2026

A New Nitrogen-Rich Energetic Material with So Many Tautomers

A new nitrogen-rich triazolo-triazole compound, (3-(6-methyl-1H-[1,2,4]triazolo[4,3-b][1,2,4]triazol-3-yl)-1H-1,2,4-triazol-5-amine), TTT1, has been prepared, and its acid–base and tautomeric behavior has been investigated. In the pH range of 0.3–12, TTT1 can accept up to two protons, forming a monocation and a dication, and can deliver one proton, forming a monoanion. The tautomeric behavior is particularly rich for the monocation, for which computational analysis predicts four different tautomers in a narrow energy range of 2 kcal/mol. Two of these tautomers (2H-7H-8H and 3H-7H-8H) have been isolated in salts of the monocation with suitable counterions (chloride, bromide, perchlorate). Surprisingly, the most stable predicted tautomer, 1H-3H-7H, has not been found in the four crystallized salts of the monocation. The energetic perchlorate salt of the monocation (3H-7H-8H tautomer) shows good thermal stability and good stability to impact, friction, and electric discharge. The packing of this compound shows the formation of H-bonded dimers with interactions between N8–H···N1. The crystal structure of this energetic salt was studied experimentally up to 2.8 GPa; no phase change or decomposition was observed.

Chemical structure↗
DOE OSTI2024

Liquid–Liquid Equilibrium Prediction in Fast Pyrolysis Bio-Oil Systems: A Framework for Incorporating Bio-Oil Complexity

The study of mixtures of bio-oil, water and organic solvents in different proportions can serve as a cost-effective analysis of its content due to the formation of immiscible phases. This manuscript attempts to replicate experimentally determined partition coefficients (K OW ) of relevant species present in fast pyrolysis bio-oil (FPBO). A commercial flowsheeting simulator with surrogate bio-oil model representation is used. Concurrently, pyrolytic lignins in FPBO (‘pyrolignin’) do not have an agreed-upon structural representation, and the literature is ripe with wide variations of said representations. Thus, during the description of FPBO, this pyrolignin fraction was modeled using 20 possible structures (phenolic dimers to tetramers), with the goal of determining the structures for which the experimental data are best described. Two cases were considered: Case 1 normalized the reported experimental mass balance, while Case 2 included the unreported fraction in the mass balance to the total pyroligin. Please, add here a comment on the prediction of the Water oil equilibrium. The best KOW predictions for levoglucosan (LVG) were obtained when the system was modeled with no pyrolignin, presenting an MRE under 10% for both systems WO and BO. Among the possible structures, D2 (dimer), F1 (trimer) and I1, and I3 (tetramers) presented MRE ≤ 13% for both cases.

09 BIOMASS FUELS↗
DOE OSTI2024

Electrical de-poling and re-poling of relaxor-PbTiO 3 piezoelectric single crystals without heat treatment

Re-poling of unexpected partially depoled piezoelectric materials conventionally needs to be first fully depoled through annealing above their Curie temperature to revive piezoelectric performances. Here, we investigated de-poling and re-poling of Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 single crystals under electric fields at room temperature. We found that alternating current electric fields with amplitudes near the coercive field at low frequencies (<10 Hz) can be employed to successfully depolarize poled crystals at room temperature. We also demonstrated a reversible polarization switching process with a relaxor-PbTiO 3 single crystal ultrasound transducer without device performance degradations. This experimental observation is supported by phase-field simulation, showing that alternating current electric fields can readily induce de-poling at room temperature, while direct current electric fields induce a transient depoled state only within an uncontrollable short period of time. The findings suggest new strategies for unprecedented in-device tailoring of the polarization states of ferroelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced polymorph metastability drives glycine nucleation in aqueous salt solutions

Crystal nucleation from aqueous solutions influences countless geological, biochemical, astrophysical, environmental, and materials science–related phenomena, including ice formation, the manufacturing of active pharmaceutical ingredients, development of diseases such as Alzheimer’s and the origin of life itself. Understanding and controlling nucleation is essential for designing materials with specific properties, developing strategies to inhibit or promote crystallization in various contexts and preventing pathological aggregation in neurodegenerative diseases. Similar to the protein structure prediction problem—where a single amino acid sequence can in theory adopt one most stable conformation but in practice may sample multiple competing conformations—crystal nucleation faces a parallel challenge: the same chemical species can form diverse polymorphs under different environmental conditions (e.g., temperature, pressure, solvent). Each polymorph presents its own set of physical and chemical properties, highlighting the importance of understanding and controlling polymorph selection in fields ranging from pharmaceuticals to materials design. Despite advances in experimental and computational methods for studying phase transitions and polymorph stability, nucleation remains challenging due to its nanoscale nature. Furthermore, in practical settings, salts and impurities can further influence crystal nucleation in diverse contexts, from scaling in pipelines and desalination plants to the durability of concrete and the efficiency of battery materials. This can lead to the formation of polymorphs that may differ from the most stable phase in pure solutions. Or, even though the final structure might appear same irrespective of whether the environment contained impurities or not, the mechanism through which it was formed might be completely different and not intuitive.

Wang, Ruiyu [University of Maryland, College Park,↗
DOE OSTI2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗
DOE OSTI2024

Atomic structure and melting of Ni and Fe 36 Ni up to 400 GPa

Iron, nickel and its alloys are critically important materials for industrial and technological applications due to their unique magnetic properties, strength, and thermal expansion. In this study, lasers were used to compress and heat Fe 36 Ni alloy (36 wt% Ni) and pure nickel up to the melting temperature using a combination of shock and ramp compression. The structure was measured using nanosecond in-situ x-ray diffraction, and simultaneous velocimetry was used to measure the pressure up to 454 GPa. A mixed face-centered-cubic (fcc) solid–liquid phase in Fe 36 Ni at 311 GPa provides experimental evidence that, compared to pure iron, the incorporation of nickel expands the stability field of the fcc phase to the melting curve. At lower temperatures, a mixed fcc and hexagonal-close-packed (hcp) phase is observed in ramp-compressed Fe 36 Ni at 278 GPa. At the higher compressions, a structure inconsistent with fcc, hcp, and body-centered cubic (bcc) is observed. In the case of pure Ni, the fcc phase is stable under ramp compression up to 402 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Persistent Hot-Spot Mix in Cryogenic Direct-Drive Fusion Experiments

We show that an x-ray emission signature associated with acceleration phase mass injection correlates with poor experimental hot-spot convergence and a reduced neutron production relative to expectations. It is shown that with increased target mass as well as with higher-design adiabats, this signature is reduced, whereas with increased debris on the target the signature is increased. Here, we estimate that the vapor region in typical best designs may have up to 2x the assumed hydrogen mass at the start of deceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Active Fluids Form System-Spanning Filamentary Networks

Recent experimental realizations of liquid-liquid phase separation of active liquid crystals have offered an insight into the interaction between phase separation, ubiquitous in soft matter and biology, and chaotic active flows. Here, in this Letter, we use continuum theory to examine phase separation of an active liquid crystal and a passive fluid and report two new results. First, we provide an analytical derivation of the activity-induced suppression of the phase boundary of the coexistence region—a result first reported in simulations and experiments. We show that the shift in the critical point is a result of the balance between self-stirring active flows and phase-separating diffusive fluxes. Second, we show that this same balance is responsible for dramatically changing the morphology of the phase separated state, resulting in the emergence of a new mixed active phase consisting of a dynamical filamentous active network that invades the entire system area, trapping droplets of passive material. This structure exists even for very low volume fractions of active material. Our work provides an important step towards the goal of understanding how to use activity as a new handle for sculpting interfaces.

active nematics↗
DOE OSTI2025

Applied-field magnetic structure and spectroscopy shifts of the effective spin-$\frac{1}{2}$ 𝑋⁢𝑌-like magnet Li 2 ⁢CoCl 4

Insulators containing chains of magnetic transition metal cations provide platforms for probing spin-$\frac{1}{2}$ dynamics and quantum critical behavior. Li 2 ⁢ CoCl 4 contains edge-sharing CoCl 6 octahedra that form chains along the crystallographic 𝑐 axis and orders antiferromagnetically at zero field, but questions remain about its applied-field magnetic structure and the Co 2+ spin state. Here, in this study, we show with neutron diffraction on a polycrystalline sample how the antialigned chains of cobalt moments begin to transition to a ferromagnetic state above 1.6 T. Further, using magnetic resonance absorption measurements and noninteracting spin models, we reveal the strongly anisotropic nature of the Co 2+ ion's 𝑋⁢𝑌-like magnetic behavior (𝑔 ∥ = 2.77 and 𝑔 ⊥ = 5.23) and its 𝐽 = $\frac{1}{2}$ ground state. We therefore supply the magnetic structures and anisotropic description needed to explore the dynamics of the field-driven magnetic phases, laying the foundation for further experimental and theoretical studies.

Riedel, Zachary W. [Univ. of Illinois at Urbana-Ch↗
DOE OSTI2024

Three phase spectral interferometry for recording high dynamic range optical waveforms with <1 ps resolution over >2 ns records applied to closed-loop pulse shaping

Herein we demonstrate, to our knowledge, a novel spectral interferometry technique that simultaneously captures three spectral interferograms of a signal waveform with a reference pulse. The measured performance is robust to nonidealities and ambient drifts by implementing a precisely calibrated 3 × 3 polarization maintaining (PM) splitter that provides three phase shift differences nominally spaced 120° apart. The system can achieve long record length by implementing three, high resolution, virtually imaged phase array (VIPA) spectrometers. Here, we experimentally implement this technique and demonstrate the measurement of waveforms with >2ns of record while maintaining <1ps resolution.

42 ENGINEERING↗
DOE OSTI2026

Thermoelectric Behavior of Structurally Disordered Lanthanide and Actinide Silicides

Lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties arising from their partially filled f orbitals. Strong f-electron correlations can significantly modify the electronic density of states, carrier scattering, and transport behavior, making these systems promising candidates for unconventional thermoelectric materials. In previous studies, single crystals of A1.33T4Al8Si2 (A = Ce, Th, U, Np; T = Co, Ni) were synthesized. This structure consists of ordered TAl2 corrugated double layers separated by disordered An–Si monolayers. The inherent disorder within the An–Si layers has been linked to unusual magnetic behavior, such as spin-glass phenomena, and is expected to strongly influence phonon scattering and charge-carrier transport relevant to thermoelectric performance. However, the thermoelectric properties of this material family have not previously been explored. In this work, DFT calculations were performed to evaluate the electronic density of states, band structures, and thermoelectric properties, including the effects of doping. To validate these predictions, Ce1.33Co4Al8Si2 single crystals were grown and experimentally characterized. Additionally, a new Yb1.33Co4Al8Si2 phase was synthesized and characterized using single-crystal XRD, SEM-EDS, magnetization measurements, and thermoelectric measurements. These results provide insight into structure–property relationships governing thermoelectric behavior in f-electron intermetallics and offer guidance for future thermoelectric materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2025

Kramers nodal lines in intercalated TaS 2 superconductors

Kramers degeneracy is one fundamental embodiment of the quantum mechanical nature of particles with half-integer spin under time reversal symmetry. Under the chiral and noncentrosymmetric achiral crystalline symmetries, Kramers degeneracy emerges respectively as topological quasiparticles of Weyl fermions and Kramers nodal lines (KNLs), anchoring the Berry phase-related physics of electrons. However, an experimental demonstration for ideal KNLs well isolated at the Fermi level is lacking. Here, we establish a class of noncentrosymmetric achiral intercalated transition metal dichalcogenide superconductors with large Ising-type spin-orbit coupling, represented by In x TaS 2 , to host an ideal KNL phase. We provide evidence from angle-resolved photoemission spectroscopy with spin resolution, angle-dependent quantum oscillation measurements, and ab-initio calculations. Our work not only provides a realistic platform for realizing and tuning KNLs in layered materials, but also paves the way for exploring the interplay between KNLs and superconductivity, as well as applications pertaining to spintronics, valleytronics, and nonlinear transport.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Benchmarking of massively parallel phase-field codes for directional solidification

We present a detailed benchmark comparing two state-of-the-art phase-field implementations for simulating alloy solidification under experimentally relevant conditions. The study investigates the directional solidification of Al-3wt%Cu under high-velocity solidification conditions and SCN-0.46wt% camphor under microgravity conditions from National Aeronautics and Space Administration (NASA) DECLIC-DSI-R experiments. Both codes, one employing finite-difference discretization with uniform mesh and GPU-acceleration (GPU-PF) and the other one employing finite-element discretization with adaptive-mesh and CPU-parallelization (PRISMS-PF), solve the same quantitative phase-field formulation that incorporates an anti-trapping current for the solidification of dilute alloys. We evaluate the predictions of each code for dendritic morphology, primary spacing, and tip dynamics in both 2D and 3D, as well as their numerical convergence and computational performance. While existing benchmark problems have primarily focused on simplified or small-scale simulations, they do not reflect the computational and modeling challenges posed by employing experimentally relevant time and length scales. Our results provide a practical framework for assessing phase-field code performance as well as validating and facilitating their application in integrated computational materials engineering (ICME) workflows that require integration with realistic experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multimetallic Metal-Organic Frameworks as Heterogeneous Catalysts for Gas Phase Hydroformylation and Hydrogenation Reactions

This project focused on the development bimetallic metal-organic frameworks (MOFs) as gas phase heterogeneous catalysts for hydrogenation and hydroformylation reactions. MOFs are a new class of hybrid inorganic/organic materials that are highly crystalline, with structures consisting of metal nodes of specific geometries connected by organic linkers. Although there have been a number of studies of catalysis at MOF nodes in solution, there is little experimental data in the literature for gas phase reactions despite the fact that industrial heterogeneous catalysis on MOFs is more economically viable than homogeneous catalysis. The use of MOFs as heterogeneous catalysts presents the unique opportunity to carefully control the composition, geometry and ensemble sizes of the active sites, which are all critical factors for the rational design of new catalysts. Specific objectives of the project are as follows: (1) to tailor the geometry, composition and ensemble size of the active sites; (2) to understand how the adsorption of molecules at metal sites can be modified by interactions with a neighboring metal site; (3) to determine how oxidation states of the metal change during reaction and how these states can be modified by metal-metal electronic interactions; and (4) to elucidate reaction mechanisms and intermediates. For these studies, we have chosen to investigate selective hydrogenation of hydrocarbons and hydroformylation, which are industrially relevant reactions. Our interdisciplinary team of Chen, Shustova and Vogiatzis/Henkelman provides critical expertise in novel MOF synthesis (Shustova), atomic-scale surface science and catalysis (Chen) and computational studies of reaction mechanisms (Vogiatzis/Henkelman) that are necessary for the development of these catalysts. We believe that this work will lead directly to the rational design of new catalysts that are versatile, highly active/selective and suitable for industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗