Search NASA⌕ Search

SEARCH · Search NASA

Results for “polaron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Role of Surface Oxygen Vacancies in BiVO 4

Bismuth vanadate (BiVO 4 ) is a widely studied oxide in solar water splitting, known for its ease of synthesis, high charge extraction yields, and advantageous band alignment with water. We present a combined first-principles and experimental study of the electronic structure of the (010) surface of BiVO 4 aimed at disentangling the impact of the surface and bulk oxygen vacancies on the electronic structure and transport properties. We found that oxygen vacancies are deep donors at the surface as they are in the bulk; our calculations on defect and polaron formation energies suggest that, while polarons formed from oxygen vacancies in the bulk can contribute to conductivity, those at the surface likely do not. Our results also show that out-of-plane structural relaxations at the surface contribute to the relatively immobile nature of electron polarons derived from surface oxygen vacancies. The structural model derived from first-principles calculation was validated by comparing computed results with experimental measurements of single-crystal and epitaxially grown single-crystalline BiVO 4 samples. Finally, we also found a reasonably good agreement between our calculated and measured work functions for BiVO 4 samples with and without oxygen vacancies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic Structure of Excitons in Hematite Fe 2 O 3

We present a computational study of the electronic structure of excitons in hematite Fe 2 O 3 using density functional theory (DFT) and time-dependent DFT theory. Excitons resulting from solar light absorption are precursors to photogenerated charge carriers, which are the active species in solar-to-fuel redox conversions. Upon vertical excitation, the lowest energy exciton is found to have a multideterminantal wave function, describing an electron excited from O 2p states to Fe 3d states of the nearest basal plane, possibly supporting a recent XUV-derived exciton structure with a radius of a single Fe–O bond. Subsequently, the exciton self-traps into stable electron–hole pair structures whose wave functions are well-approximated by single excitations conveniently labeled “HOMO–LUMO”. Self-trapping yields electron–hole pair structures whereby the electron state (electron polaron-like) is separated from the hole state (hole polaron-like) by 3, 5, 7, 9, ... basal planes in structures referred to as Exc-3, Exc-5, Exc-7, Exc-9, ... The natural transition orbitals (electron–hole states) exhibit a strong “localized” character. The hole state is best described as a (FeO 6 ) + octahedral moiety carrying ~0.65 h + charge, and overall ~70% of the hole is assigned to O 2p atomic states, mostly on the four (4) equatorial O atoms of the moiety. The electron state is best described as a (FeFe) – moiety carrying ~0.80 e – charge in Fe 3d atomic states. The lattice distortions around the hole site exhibit Fe–O bond shortening due to the removal of electron density from an orbital state with O–Fe–O antibonding character. The electron site shows Fe–Fe distance shortening due to excess electron density added to an orbital state with in-phase Fe–Fe interactions. Furthermore, these excitonic structures with increasing electron–hole separation can be viewed as the onset of exciton separation into isolated electrons and hole polarons.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrochemical Oxidation of Metal–Catechol Complexes as a New Synthesis Route to the High-Quality Ternary Photoelectrodes: A Case Study of Fe 2 TiO 5 Photoanodes

A new electrochemical, solution-based synthesis method to prepare uniform multinary oxide photoelectrodes was developed. This method involves solubilizing multiple metal ions as metal-catechol complexes in a pH condition where they are otherwise insoluble. When some of the catechol ligands are electrochemically oxidized, the remaining metal complexes become insoluble and are deposited as metal-catechol films on the working electrode. The resulting films are then annealed to form crystalline multinary oxide electrodes. Since catechol can serve as a complexing agent for a variety of metal ions, the newly developed method can be used to prepare a variety of multinary oxide films. In the present study, we used this method to prepare n-type Fe 2 TiO 5 photoanodes and investigated their photoelectrochemical properties for use in a photoelectrochemical water splitting cell. We also performed a computational investigation with two goals. The first goal was to investigate small electron polaron formation in Fe 2 TiO 5 . Charge transport in most oxide photoelectrodes involves small polaron hopping, but small polaron formation in Fe 2 TiO 5 has not been examined prior to this work. The second goal was to investigate the effect of substitutional Sn doping at the Fe site on the electronic band structure and the carrier concentration of Fe 2 TiO 5 . Here, the combined experimental and theoretical results presented in this study greatly improve our understanding of Fe 2 TiO 5 for use as a photoanode.

14 SOLAR ENERGY↗
DOE OSTI2020

Fast Organic Vapor Phase Deposition of Thin Films in Light-Emitting Diodes

Fast deposition of thin films is essential for achieving low-cost, high throughput phosphorescent organic light emitting diode (PHOLED) production. In this work, we demonstrate rapid and uniform growth of semiconductor thin films by organic vapor phase deposition (OVPD). A green PHOLED comprising an emission layer (EML) grown at 50 Å/s with bis[2-(2-pyridinyl-N)phenyl-C](acetylacetonato)iridium(III) (Ir(ppy)2(acac)) doped into 4,4 bis(N-carbazolyl)-1,1zolylld (CBP) exhibits a maximum external quantum efficiency of 20 ± 1%. The morphology, charge transport properties, and radiative efficiency under optical and electrical excitation of the PHOLED EML are investigated as functions of the deposition rate via both experimental and theoretical approaches. The EML shows no evidence for gas phase nucleation of the organic molecules at deposition rates as high as 50 Å/s. However, the roll-off in quantum efficiency at high current progressively increases with deposition rate due to enhanced triplet-polaron annihilation. The roll-off results from accumulation of stress within the PHOLED EML that generates a high density of defect states. Here, the defects, in turn, act as recombination sites for triplets and hole polarons, leading to enhanced triplet-polaron annihilation at high current. We introduce a void nucleation model to describe the film morphology evolution that is observed using electron microscopy.

42 ENGINEERING↗
DOE OSTI2025

Unconventional solitonic high-temperature superfluorescence from perovskites

Fast thermal dephasing limits macroscopic quantum phenomena to cryogenic conditions and hinders their use at ambient temperatures. For electronic excitations in condensed media, dephasing is mediated by thermal lattice motion. Therefore, taming the lattice influence is essential for creating collective electronic quantum states at high temperatures. Although there are occasional reports of high-T c quantum effects across different platforms, it is unclear which lattice characteristics and electron–lattice interactions lead to macroscopically coherent electronic states in solids. Here we studied intensity fluctuations in the macroscopic polarization during the emergence of superfluorescence in a lead halide perovskite and showed that spontaneously synchronized polaronic lattice oscillations accompany collective electronic dipole emission. We further developed an effective field model and theoretically confirmed that exciton–lattice interactions lead to a new electronically and structurally entangled coherent extended solitonic state beyond a critical polaron density. The analysis shows a phase transition with two processes happening in tandem: incoherent disordered polaronic lattice deformations establish an order, while macroscopic quantum coherence among excitons simultaneously emerges. Recombination of excitons in this state culminates in superfluorescence at high temperatures. Our study establishes fundamental connections between the transient superfluorescence process observed after the impulsive excitation of perovskites and general equilibrium phase transitions achieved by thermal cooling. By identifying various electron–lattice interactions in the perovskite structure and their respective role in creating collectively coherent electronic effects in solids, our work provides unprecedented insight into the design and development of new materials that exhibit high-temperature macroscopic quantum phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Point defects and impurities in fluorite PuO 2

The native surface oxide of plutonium plays a critical role in ensuring the stability and safe storage of the underlying metal; consequently, understanding the role of defects and impurities in determining the properties of the oxide layer is critical. Here, in this study, we use hybrid density-functional theory calculations to evaluate the electronic structure and defect chemistry of PuO 2 , the most stable of the native oxide phases, including both native and extrinsic defects. We find that oxygen vacancies (𝑉 O ) form readily in PuO 2 , as do polarons. Electron polarons (𝜂 − ) are the lowest-energy acceptor species in PuO 2 , while the charge compensating donor species will shift from 𝑉 O under O-poor conditions to hole polarons (𝜂 + ) under O-rich conditions. Nitrogen and fluorine can substitute readily for oxygen atoms under O-poor conditions, while fluorine can also incorporate in an interstitial configuration (F$^−_i$) under more O-rich conditions. Carbon and chlorine incorporation in PuO 2 will be very limited. We also evaluate the kinetic barriers for oxygen-related defects, which we find to diffuse readily when present. Our results provide valuable insights into the critical role and variable chemistry of point defects and impurities in PuO 2 , which in turn have important implications for the safe storage of the underlying metal layer. In short, exposure of freshly prepared plutonium to reactive nitrogen- and fluorine-containing contaminants should be avoided, while carbon- or chlorine-containing contaminants are less likely to incorporate readily into the oxide.

Materials science↗
DOE OSTI2020

Spectroscopic signatures of next-nearest-neighbor hopping in the charge and spin dynamics of doped one-dimensional antiferromagnets

In this work, we study the impact of next-nearest-neighbor (nnn) hopping on the low-energy collective excitations of strongly correlated doped antiferromagnetic cuprate spin chains. Specifically, we use exact diagonalization and the density matrix renormalization group method to study the single-particle spectral function, the dynamical spin and charge structure factors, and the Cu L-edge resonant inelastic x-ray scattering (RIXS) intensity of the doped t-t'-J model for a set of t' values. We find evidence for the breakdown of spin-charge separation as |t'| increases and identify its fingerprints in the dynamical response functions. The inclusion of nnn hopping couples the spinon and holon excitations, resulting in the formation of a spin-polaron, where a ferromagnetic spin polarization cloud dresses the doped carrier. The spin-polaron manifests itself as additional spectral weight in the dynamical correlation functions, which appear simultaneously in the spin- and charge-sensitive channels. We also demonstrate that RIXS can provide a unique view of the spin-polaron, due to its sensitivity to both the spin and charge degrees of freedom.

1D spin chains↗
DOE OSTI2023

Comparative study of the superconductivity in the Holstein and optical Su-Schrieffer-Heeger models

Theoretical studies suggest that Su-Schrieffer-Heeger-like electron-phonon (e-ph) interactions can mediate high-temperature bipolaronic superconductivity that is robust against repulsive electron-electron interactions. Here we present a comparative analysis of the pairing and competing charge/bond correlations in the two-dimensional Holstein and optical Su-Schrieffer-Heeger (SSH) models using numerically exact determinant quantum Monte Carlo. We find that the SSH interactions support light bipolarons and strong superconducting correlations out to relatively large values of the e-ph coupling λ and densities near half-filling, while the Holstein interaction does not due to the formation of heavy bipolarons and competing charge-density-wave order. We further find that the Holstein and SSH models have comparable pairing correlations in the weak coupling limit for carrier concentrations < n > <<1, where competing orders and polaronic effects are absent. These results support the proposal that SSH (bi)polarons can support superconductivity to larger values of λ in comparison to the Holstein polaron, but that the resulting T c gains are small in the weak coupling limit. We also find that the SSH model's pairing correlations are suppressed after including a weak on-site Hubbard repulsion. Furthermore, these results have important implications for identifying and engineering bipolaronic superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electronic and Magnetic Properties of Oligomers and Chains of Poly(benzodifurandione) (PBDF), A Highly Conducting n-Type Polymer

The seminal development of highly electrically conducting polyacetylene via oxidative or reductive treatment (“doping”) has continuously inspired the search for other conducting π-conjugated polymers. Recently, poly(benzodifurandione), PBDF, was reported to have unexpected solubility given the absence of side chains and to exhibit an unprecedented, high electrical conductivity upon reduction (“n-doping”), with protons acting as counterions. Here, we theoretically investigate the electronic and magnetic properties of PBDF by taking long oligomers and one-dimensional (1D) periodic chains as model systems. With the oligomer models, we characterize the formation of polarons and bipolarons in n-doped PBDF. Our results indicate that singlet bipolarons tend to be the energetically most favorable species when protons bind to two closely located carbonyl groups in nearest-neighbor benzodifurandione moieties. The calculations on the 1D periodic chain models show that the positions of the protonated carbonyl groups determine the metallic, semiconducting, or insulating nature of a PBDF chain. When the protonated carbonyl groups are all situated on the same side of a PBDF chain, a stable helical chain configuration is found that exhibits ferromagnetic behavior. Our findings elucidate the mechanism of polaron and bipolaron formation in long oligomers of n-doped PBDF and highlight the fascinating electronic and magnetic properties of periodic 1D chains. Furthermore, these studies also provide a stepping stone for investigations of PBDF thin films, for which two- and three-dimensional structures must be considered.

36 MATERIALS SCIENCE↗
DOE OSTI2025

p-Type BiVO 4 for Solar O 2 Reduction to H 2 O 2

Photoelectrochemical cells (PECs) can directly utilize solar energy to drive chemical reactions to produce fuels and chemicals. Oxide-based photoelectrodes in general exhibit enhanced stability against photocorrosion, which is a critical advantage for building a sustainable PEC. However, most oxide-based semiconductors are n-type, and p-type oxides that can be used as photocathodes are limited. In this study, we report the synthesis, characterization, and application of p-type BiVO 4 with a monoclinic scheelite (ms) structure. ms-BiVO 4 is inherently n-type, and it has been investigated only as a photoanode to date. In this study, we prepared p-type ms-BiVO 4 (bandgap of 2.4 eV) via atomic doping of Ca 2+ at the Bi 3+ site under an O 2 -rich environment and examined its performance as a photocathode. We then demonstrated that the Ca-doped ms-BiVO 4 photocathode can be used for solar O 2 reduction to H 2 O 2 when coupled with appropriate catalysts. Our computational investigation using hybrid density functional theory revealed that holes are stable as polarons in ms-BiVO 4 and have a low self-trapping energy, that may lead to free carriers in the valence band at finite temperature. Our calculations also show that Ca is an effective shallow acceptor dopant with low formation energy and thermal ionization energy leading to p-type conductivity. In conclusion, our joint experimental and computational results provide critical insights into the design of p-type ms-BiVO 4 , enabling its use as a polaronic oxide photocathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Solution-phase sample-averaged single-particle spectroscopy of quantum emitters with femtosecond resolution

Here, the development of many optical quantum technologies depends on the availability of solid-state single quantum emitters with near-perfect optical coherence. However, a standing issue that limits systematic improvement is the significant sample heterogeneity and lack of mechanistic understanding of microscopic energy flow at the single emitter level and ultrafast timescales. Here we develop solution-phase single-particle pump-probe spectroscopy with photon correlation detection that captures sample-averaged dynamics in single molecules and/or defect states with unprecedented clarity at femtosecond resolution. We apply this technique to single quantum emitters in two-dimensional hexagonal boron nitride, which suffers from significant heterogeneity and low quantum efficiency. From millisecond to nanosecond timescales, the translation diffusion, metastable-state-related bunching shoulders, rotational dynamics, and antibunching features are disentangled by their distinct photon-correlation timescales, which collectively quantify the normalized two-photon emission quantum yield. Leveraging its femtosecond resolution, spectral selectivity and ultralow noise (two orders of magnitude improvement over solid-state methods), we visualize electron-phonon coupling in the time domain at the single defect level, and discover the acceleration of polaronic formation driven by multi-electron excitation. Corroborated with results from a theoretical polaron model, we show how this translates to sample-averaged photon fidelity characterization of cascaded emission efficiency and optical decoherence time. Our work provides a framework for ultrafast spectroscopy in single emitters, molecules, or defects prone to photoluminescence intermittency and heterogeneity, opening new avenues of extreme-scale characterization and synthetic improvements for quantum information applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reducing Spontaneous Orientational Polarization via Semiconductor Dilution Improves OLED Efficiency and Lifetime

Spontaneous orientational polarization (SOP) in the electron-transport layer (ETL) of organic light-emitting diodes (OLEDs) is increasingly recognized as a key factor influencing their performance. Here, we show that SOP is dramatically reduced in the common electron-transport material 2,2',2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) by coevaporating it together with medium-density polyethylene. Eliminating SOP from the ETL of blue fluorescent OLEDs in this manner reduces their operating voltage by 0.5 V, increases their external quantum efficiency (EQE) by 30%, and leads to a threefold increase in device lifetime. We show that the EQE and lifetime improvements both originate from reduced exciton-polaron annihilation in the emissive layer, and that this leads to a functional relationship between the two quantities that can be used to quantify the rate of annihilation-induced degradation in the device. Furthermore, these results highlight a substantial opportunity to improve OLED performance by controlling SOP through semiconductor dilution and suggest that this capability can be used to systematically isolate and understand exciton-polaron degradation in the pursuit of stable blue OLEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ab Initio Electron-Phonon Interactions in Correlated Electron Systems

Electron-phonon ( e - ph ) interactions are pervasive in condensed matter, governing phenomena such as transport, superconductivity, charge-density waves, polarons, and metal-insulator transitions. First-principles approaches enable accurate calculations of e - ph interactions in a wide range of solids. However, they remain an open challenge in correlated electron systems (CES), where density functional theory often fails to describe the ground state. Therefore reliable e - ph calculations remain out of reach for many transition metal oxides, high-temperature superconductors, Mott insulators, planetary materials, and multiferroics. Here we show first-principles calculations of e - ph interactions in CES, using the framework of Hubbard-corrected density functional theory ( DFT + U ) and its linear response extension ( DFPT + U ), which can describe the electronic structure and lattice dynamics of many CES. We showcase the accuracy of this approach for a prototypical Mott system, CoO, carrying out a detailed investigation of its e - ph interactions and electron spectral functions. While standard DFPT gives unphysically divergent and short-ranged e - ph interactions, DFPT + U is shown to remove the divergences and properly account for the long-range Fröhlich interaction, allowing us to model polaron effects in a Mott insulator. Our work establishes a broadly applicable and affordable approach for quantitative studies of e - ph interactions in CES, a novel theoretical tool to interpret experiments in this broad class of materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Oscillate and renormalize: Fast phonons reshape the Kondo effect in flat-band systems

Here, we examine the interplay between electron correlations and phonons in an Anderson-Holstein impurity model with an Einstein phonon. When the phonons are slow compared to charge fluctuations (frequency 𝜔 0 ≪ 𝑈/2, the onsite Coulomb scale 𝑈/2), we demonstrate analytically that the expected phonon-mediated reduction of interactions is completely suppressed, even in the strong-coupling regime. This suppression arises from the oscillator's inability to respond to rapid charge fluctuations, manifested as a compensation effect between the polaronic cloud and the excited-state phonons associated with valence fluctuations. We identify a frozen mixed valence phase, above a threshold dimensionless electron-phonon coupling 𝛼* when the phonons are slow, where the static phonon cloud locks the impurity into specific valence configurations, potentially explaining the puzzling coexistence of mixed valence behavior and insulating properties in materials like rust. Conversely, when the phonon is fast (𝜔 0 ≳ 𝑈/2), the system exhibits conventional polaronic behavior with renormalized onsite interactions effectively 𝑈 eff due to phonon-mediated attraction, with additional satellite features in the local spectral function due to phonon excitations. Using numerical renormalization group calculations, a fully dynamic renormalization technique, we confirm these behaviors in both regimes. These findings have important implications for strongly correlated systems where phonon energy scales may be comparable to the Coulomb scale, such as in twisted bilayer graphene, necessitating careful consideration of interaction renormalizations in theoretical models.

Anderson impurity model↗
DOE OSTI2021

Real-Time Identification of Oxygen Vacancy Centers in LiNbO 3 and SrTiO 3 during Irradiation with High Energy Particles

Oxygen vacancies are known to play a central role in the optoelectronic properties of oxide perovskites. A detailed description of the exact mechanisms by which oxygen vacancies govern such properties, however, is still quite incomplete. The unambiguous identification of oxygen vacancies has been a subject of intense discussion. Interest in oxygen vacancies is not purely academic. Precise control of oxygen vacancies has potential technological benefits in optoelectronic devices. In this review paper, we focus our attention on the generation of oxygen vacancies by irradiation with high energy particles. Irradiation constitutes an efficient and reliable strategy to introduce, monitor, and characterize oxygen vacancies. Unfortunately, this technique has been underexploited despite its demonstrated advantages. This review revisits the main experimental results that have been obtained for oxygen vacancy centers (a) under high energy electron irradiation (100 keV–1 MeV) in LiNbO 3 , and (b) during irradiation with high-energy heavy (1–20 MeV) ions in SrTiO 3 . In both cases, the experiments have used real-time and in situ optical detection. Moreover, the present paper discusses the obtained results in relation to present knowledge from both the experimental and theoretical perspectives. Our view is that a consistent picture is now emerging on the structure and relevant optical features (absorption and emission spectra) of these centers. One key aspect of the topic pertains to the generation of self-trapped electrons as small polarons by irradiation of the crystal lattice and their stabilization by oxygen vacancies. What has been learned by observing the interplay between polarons and vacancies has inspired new models for color centers in dielectric crystals, models which represent an advancement from the early models of color centers in alkali halides and simple oxides. The topic discussed in this review is particularly useful to better understand the complex effects of different types of radiation on the defect structure of those materials, therefore providing relevant clues for nuclear engineering applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Observation of Bandgap Oscillations Induced by Optical Phonons in Hybrid Lead Iodi.de Perovskites

Hybrid organic-inorganic perovskites such as methylammonium lead iodide have emerged as promising semiconductors for energy-relevant applications. The interactions between charge carriers and lattice vibrations, giving rise to polarons, have been invoked to explain some of their extraordinary optoelectronic properties. Here, time-resolved optical spectroscopy is performed, with off-resonant pumping and electronic probing, to examine several representative lead iodide perovskites. The temporal oscillations of electronic bandgaps induced by coherent lattice vibrations are reported, which is attributed to antiphase octahedral rotations that dominate in the examined 3D and 2D hybrid perovskites. The off-resonant pumping scheme permits a simplified observation of changes in the bandgap owing to the A(g) vibrational mode, which is qualitatively different from vibrational modes of other symmetries and without increased complexity of photogenerated electronic charges. The work demonstrates a strong correlation between the lead-iodide octahedral framework and electronic transitions, and provides further insights into the manipulation of coherent optical phonons and related properties in hybrid perovskites on ultrafast timescales.

coherent optical phonons↗
DOE OSTI2022

The Molecular Ordering and Double-Channel Carrier Generation of Nonfullerene Photovoltaics within Multi-Length-Scale Morphology

The success of nonfullerene acceptor (NFA) solar cells lies in their unique physical properties beyond the extended absorption and suitable energy levels. The current study investigates the morphology and photophysical behavior of PBDB-T donor blending with ITIC, 4TIC, and 6TIC acceptors. Single-crystal study shows that the π–π stacking and side-chain interaction dictate molecular assembly, which can be carried to blended films, forming a multi-length-scale morphology. Spontaneous carrier generation is seen in ITIC, 4TIC, and 6TIC neat films and their blended thin films using the PBDB-T donor, providing a new avenue of zero-energy-loss carrier formation. The molecular packing associated with specific contacts and geometry is key in influencing the photophysics, as demonstrated by the charge transfer and carrier lifetime results. The 2D layer of 6TIC facilitates the exciton-to-polaron conversion, and the largest photogenerated polaron yield is obtained. Finally, the new mechanism, together with the highly efficient blending region carrier generation, has the prospect of the fundamental advantage for NFA solar cells, from molecular assembly to thin-film morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Charge Carrier Induced Structural Ordering And Disordering in Organic Mixed Ionic Electronic Conductors

Operational stability underpins the successful application of organic mixed ionic-electronic conductors (OMIECs) in a wide range of fields, including biosensing, neuromorphic computing, and wearable electronics. Here in this work, both the operation and stability of a p-type OMIEC material of various molecular weights are investigated. Electrochemical transistor measurements reveal that device operation is very stable for at least 300 charging/discharging cycles independent of molecular weight, provided the charge density is kept below the threshold where strong charge–charge interactions become likely. When electrochemically charged to higher charge densities, an increase in device hysteresis and a decrease in conductivity due to a drop in the hole mobility arising from long-range microstructural disruptions are observed. By employing operando X-ray scattering techniques, two regimes of polaron-induced structural changes are found: 1) polaron-induced structural ordering at low carrier densities, and 2) irreversible structural disordering that disrupts charge transport at high carrier densities, where charge–charge interactions are significant. These operando measurements also reveal that the transfer curve hysteresis at high carrier densities is accompanied by an analogous structural hysteresis, providing a microstructural basis for such instabilities. This work provides a mechanistic understanding of the structural dynamics and material instabilities of OMIEC materials during device operation.

36 MATERIALS SCIENCE↗