Search NASA⌕ Search

SEARCH · Search NASA

Results for “preferred orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Integration of altitude and airspeed information into a primary flight display via moving-tape formats

A ground-based aircraft simulation study was conducted to determine the effect on pilot performance of replacing the electromechanical altimeter and airspeed indicators with electronically generated representations integrated into the primary flight display via moving-tape (linear moving scale) formats. Several key factors relating to moving-tape formats were examined during the study: tape centering, secondary (trend) information, and tape orientation. The factor of centering refers to whether the tape was centered about the actual airspeed or altitude or about some defined reference value. Tape orientation refers to whether the values represented are arranged in either descending or ascending order. Six pilots participated in this study, with each subject performing 18 runs along a single, known flight profile. Subjective results indicated that the moving-tape formats were generally better than that of the conventional instruments. They also indicated that an actual-centered fixed pointer was preferred to a reference-centered pointer. Performance data for a visual secondary task showed that formats not containing trend information produced better performance; however, no difference was noted in airspeed tracking or altitude tracking performance. Regarding tape orientation, subjective comments indicated that there was lower work load and better performance when the airspeed tape had the high numbers at the top.

Abbott, Terence S.↗

Effects of n-dominance and group composition on task efficiency in laboratory triads.

Task-oriented triads were formed into various homogeneous and heterogeneous combinations according to their scores on the n-dominance personality trait of the Edwards Personal Preference Schedule. Five group categories were used. The group task required a consensus decision on each trial. High cooperation and interdependence were reinforced by partially restricting the communication network. Results showed heterogeneous groups significantly better at organizing their group communication processes. They consequently performed the task more efficiently than homogeneous triads.

Lampkin, E. C.↗

Textural remanence - A new model of lunar rock magnetism

In reexamining the accumulated magnetic data on lunar rocks, several common patterns of magnetic behavior are recognized. Their joint occurrence strongly suggests a new model of lunar rock magnetism, which is based on partial preferred textural alignment of the spontaneous moments of magnetic grains without requiring the existence of ancient lunar magnetic fields. This magnetic fabric, mimetic to locally oriented petrofabric, gives rise to an apparent 'textural remanent magnetization'. In order to account for the observed intensity of 'stable remanence' in lunar rocks, only a minute fraction (0.001 to 0.00001) of the single-domain iron grains present need be preferentially aligned. Several mechanisms operating on the lunar surface, including shock and diurnal thermal cycling, appear adequate for producing the required type and degree of magnetic alignment in all lunar rock classes. The model is supported by a wide variety of direct and indirect evidence, and its predictions (e.g., regarding anisotropic susceptibility and remanence acquisition) can be experimentally tested.

Brecher, A.↗

Potentialities of lunar laser range - Differencing for measuring the earth's orientation

An investigation of range differences for their capabilities in determining the orientation of the earth in an earth-moon reference system is presented. Each pair of two coobserving stations forms an observational unit which is preferably located along a meridian or parallel; for a time interval from the instant of the first simultaneous observation of the most eastern line to the last observation of the most western line, a variance analysis shows that the pole position and the earth rotation can be computed independently of errors in the adopted lunar ephemeris. It is concluded that if the stations are within 10 to 15 deg in north-south or east-west direction the standard deviations of the parameters do not increase significantly.

Leick, A.↗

Illumination requirements for orbital SAR - Experience from SIR-B Canadian Shield experiments

Synthetic aperture radar illumination requirements for accurate rendition of geological structure in low-relief regions of uniform radar roughness are considered, along with the effect of illumination azimuth biasing. Results of two Shuttle imaging radar Canadian Shield experiments are discussed with emphasis on look azimuth, look direction, and look angle. It is found out that at least two look azimuths, preferably orthogonal, are essential for adequate rendition of regional structure of the area, while four nearly-orthogonal looks are necessary to compensate for slope orientation. This can be accomplished by orbital design with crossing ground tracks or utilizing a squint mode. Attention is given to the acquisition of coverage from look directions 180 deg apart and to multiple look angles desirable for geological applications.

Lowman, P. D.↗

Gravity Wave Variances and Propagation Derived from AIRS Radiances

As the first gravity wave (GW) climatology study using nadir-viewing infrared sounders, 50 Atmospheric Infrared Sounder (AIRS) radiance channels are selected to estimate GW variances at pressure levels between 2-100 hPa. The GW variance for each scan in the cross-track direction is derived from radiance perturbations in the scan, independently of adjacent scans along the orbit. Since the scanning swaths are perpendicular to the satellite orbits, which are inclined meridionally at most latitudes, the zonal component of GW propagation can be inferred by differencing the variances derived between the westmost and the eastmost viewing angles. Consistent with previous GW studies using various satellite instruments, monthly mean AIRS variance shows large enhancements over meridionally oriented mountain ranges as well as some islands at winter hemisphere high latitudes. Enhanced wave activities are also found above tropical deep convective regions. GWs prefer to propagate westward above mountain ranges, and eastward above deep convection. AIRS 90 field-of-views (FOVs), ranging from +48 deg. to −48 deg. off nadir, can detect large-amplitude GWs with a phase velocity propagating preferentially at steep angles (e.g., those from orographic and convective sources). The annual cycle dominates the GW variances and the preferred propagation directions for all latitudes. Indication of a weak two-year variation in the tropics is found, which is presumably related to the Quasi-biennial oscillation (QBO). AIRS geometry makes its out-tracks capable of detecting GWs with vertical wavelengths substantially shorter than the thickness of instrument weighting functions. The novel discovery of AIRS capability of observing shallow inertia GWs will expand the potential of satellite GW remote sensing and provide further constraints on the GW drag parameterization schemes in the general circulation models (GCMs).

AIRS↗

Cultivating Insect Cells To Produce Recombinant Proteins

Method of producing recombinant proteins involves growth of insect cells in nutrient solution in cylindrical bioreactor rotating about cylindrical axis, oriented horizontally and infecting cells with viruses into which genes of selected type cloned. Genes in question those encoding production of desired proteins. Horizontal rotating bioreactor preferred for use in method, denoted by acronym "HARV", described in "High-Aspect-Ratio Rotating Cell-Culture Vessel" (MSC-21662).

Spaulding, Glenn↗

Device for mechanically stabilizing web ribbon buttons during growth initiation

The invention relates to a stabilization device for stabilizing dendritic web seed buttons during initiation of crystal growth from a float melt zone. The invention includes angular maintenance means for maintaining a constant angular orientation between the axis of a growth initiation seed and the upper surface of a web button during withdrawal of the web button from the melt. In the preferred embodiment, the angular means includes an adjustable elevation tube which surrounds the seed, the weight of which may be selectively supported by the seed button during web button withdrawal.

Henry, Paul K.↗

Omniview motionless camera orientation system

A device for omnidirectional image viewing providing pan-and-tilt orientation, rotation, and magnification within a hemispherical field-of-view that utilizes no moving parts. The imaging device is based on the effect that the image from a fisheye lens, which produces a circular image of at entire hemispherical field-of-view, which can be mathematically corrected using high speed electronic circuitry. More specifically, an incoming fisheye image from any image acquisition source is captured in memory of the device, a transformation is performed for the viewing region of interest and viewing direction, and a corrected image is output as a video image signal for viewing, recording, or analysis. As a result, this device can accomplish the functions of pan, tilt, rotation, and zoom throughout a hemispherical field-of-view without the need for any mechanical mechanisms. The preferred embodiment of the image transformation device can provide corrected images at real-time rates, compatible with standard video equipment. The device can be used for any application where a conventional pan-and-tilt or orientation mechanism might be considered including inspection, monitoring, surveillance, and target acquisition.

Zimmermann, Steven D.↗

Enhancing optical absorption in InP and GaAs utilizing profile etching

The current state of profile etching in GaAs and InP is summarized, including data on novel geometries attainable as a function of etchant temperature, composition, and rate; substrate orientation; carrier concentration; and oxide thickness between substrate and photoresist. V-grooved solar cells were manufactured with both GaAs and InP, and the improved optical absorption was demonstrated. Preferred parameters for various applications are listed and discussed.

Bailey, Sheila G.↗

Enhancing optical absorption in InP and GaAs utilizing profile etching

The current state of profile etching in GaAs and InP is summarized, including data on novel geometries attainable as a function of etchant temperature, composition, and rate; substrate orientation; carrier concentration; and oxide thickness between substrate and photoresist. V-grooved solar cells have been manufactured with both GaAs and InP, and the improved optical absorption demonstrated. Preferred parameters for various applications are listed and discussed.

Bailey, Sheila G.↗

Optical mass memories

Optical and magnetic variants in the design of trillion-bit read/write memories are compared and tabulated. Components and materials suitable for a random access read/write nonmoving memory system are examined, with preference given to holography and photoplastic materials. Advantages and deficiencies of photoplastics are reviewed. Holographic page composer design, essential features of an optical memory with no moving parts, fiche-oriented random access memory design, and materials suitable for an efficient photoplastic fiche are considered. The optical variants offer advantages in lower volume and weight at data transfer rates near 1 Mbit/sec, but power drain is of the same order as for the magnetic variants (tape memory, disk memory). The mechanical properties of photoplastic film materials still leave much to be desired.

Bailey, G. A.↗

Technology of GaAs metal-oxide-semiconductor solar cells

The growth of an oxide interfacial layer was recently found to increase the open-circuit voltage (OCV) and efficiency by up to 60 per cent in GaAs metal-semiconductor solar cells. Details of oxidation techniques to provide the necessary oxide thickness and chemical structure and using ozone, water-vapor-saturated oxygen, or oxygen gas discharges are described, as well as apparent crystallographic orientation effects. Preliminary results of the oxide chemistry obtained from X-ray, photoelectron spectroscopy are given. Ratios of arsenic oxide to gallium oxide of unity or less seem to be preferable. Samples with the highest OVC predominantly have As(+3) in the arsenic oxide rather than As(+5). A major difficulty at this time is a reduction in OCV by 100-200 mV when the antireflection coating is vacuum deposited.

Stirn, R. J.↗

System for providing an integrated display of instantaneous information relative to aircraft attitude, heading, altitude, and horizontal situation

A display device is disclosed which is particularly suited for providing the pilot of an aircraft with combined inflight attitude, heading, altitude, and horizontal situation information previously available only by using two or three devices providing separate displays. The preferred embodiment combines a commonly used and commercially available flight director-type device for providing a display in combination with a miniature aircraft supported for angular displacement from a vertical orientation to indicate heading error, or heading offset, and an extended course deviation indicator bar which projects into juxtaposition with the miniature aircraft for providing a true picture of the aircraft's horizontal situation relative to a selective VOR, ILS, or MLS course.

James, R.↗

Invariant Theory for Dispersed Transverse Isotropy: An Efficient Means for Modeling Fiber Splay

Most soft tissues possess an oriented architecture of collagen fiber bundles, conferring both anisotropy and nonlinearity to their elastic behavior. Transverse isotropy has often been assumed for a subset of these tissues that have a single macroscopically-identifiable preferred fiber direction. Micro-structural studies, however, suggest that, in some tissues, collagen fibers are approximately normally distributed about a mean preferred fiber direction. Structural constitutive equations that account for this dispersion of fibers have been shown to capture the mechanical complexity of these tissues quite well. Such descriptions, however, are computationally cumbersome for two-dimensional (2D) fiber distributions, let alone for fully three-dimensional (3D) fiber populations. In this paper, we develop a new constitutive law for such tissues, based on a novel invariant theory for dispersed transverse isotropy. The invariant theory is based on a novel closed-form splay invariant that can easily handle 3D fiber populations, and that only requires a single parameter in the 2D case. The model is polyconvex and fits biaxial data for aortic valve tissue as accurately as the standard structural model. Modification of the fiber stress-strain law requires no re-formulation of the constitutive tangent matrix, making the model flexible for different types of soft tissues. Most importantly, the model is computationally expedient in a finite-element analysis.

Freed, alan D.↗

Advanced Manned Launch Systems

Advanced Manned Launch Systems (AMLS) studies underway at the NASA Langley Research Center are part of a broader effort examining options for the next U.S. manned space transportation system. AMLS study phases have focused on investigating mission needs and identifying technologies and technology levels, concepts, systems, operational requirements, and life-cycle costs. For near-term technologies and an operations-oriented approach, two-stage vertical-takeoff rocket vehicles with significant levels of reusability are shown to be cost-effective for moderate to high flight rates. All-hydrogen fuel vehicles are also preferred over methane boosted systems from both operational and cost considerations.

Talay, Theodore A.↗

Querying Semi-Structured Data

The amount of data of all kinds available electronically has increased dramatically in recent years. The data resides in different forms, ranging from unstructured data in the systems to highly structured in relational database systems. Data is accessible through a variety of interfaces including Web browsers, database query languages, application-specic interfaces, or data exchange formats. Some of this data is raw data, e.g., images or sound. Some of it has structure even if the structure is often implicit, and not as rigid or regular as that found in standard database systems. Sometimes the structure exists but has to be extracted from the data. Sometimes also it exists but we prefer to ignore it for certain purposes such as browsing. We call here semi-structured data this data that is (from a particular viewpoint) neither raw data nor strictly typed, i.e., not table-oriented as in a relational model or sorted-graph as in object databases. As will seen later when the notion of semi-structured data is more precisely de ned, the need for semi-structured data arises naturally in the context of data integration, even when the data sources are themselves well-structured. Although data integration is an old topic, the need to integrate a wider variety of data- formats (e.g., SGML or ASN.1 data) and data found on the Web has brought the topic of semi-structured data to the forefront of research. The main purpose of the paper is to isolate the essential aspects of semi- structured data. We also survey some proposals of models and query languages for semi-structured data. In particular, we consider recent works at Stanford U. and U. Penn on semi-structured data. In both cases, the motivation is found in the integration of heterogeneous data.

DATA MANAGEMENT↗

Influence of Nucleation Mechanisms on the Radiative Properties of Deep Convective Clouds and Subvisible Cirrus in CRYSTAL/FACE

During the past few years we have conducted work on several different topics, as reflected by our publications. As one of the Co-Project scientists for The Cirrus Regional Study of Tropical Anvils and Cirrus Layers - Florida Area Cirrus Experiment (CRYSTAL FACE) we worked to help design the mission and then conduct it in the field. Another major activity during the past two years has been to pull together various groups to formulate plans for follow on missions to CRYSTAL FACE. We organized a workshop at the University of Colorado during the summer of 2003 to assess the best locations for future missions. Working with a group of about 10 scientists from around the country we prepared a science-planning document (Tropical Composition, Cloud and Climate Coupling Experiment (TC(sup 4)) that outlined the rationale, locations, strategy to accomplish the goals, and possible payloads for a set of three tropical missions. We also prepared background materials for various NRAs being prepared at NASA Headquarters for missions in Costa Rica, Darwin and Guam. In conjunction with the group at NASA Ames we have helped build a new numerical model for deep convection and have applied that model to simulate the CRYSTAL data. Our goal in particular has been to better understand how convection distributes water vapor isotopes. CRYSTAL observations of water isotopes are very different from those suggested by previous workers who assumed the isotopes would obey Rayleigh fractionation. The water isotope study has several implications. First it is a check on the realism of the deep convection model. Second, the isotopes are a measure of the precipitation removal in the atmosphere. Hence they provide a constraint on a parameter that is difficult to otherwise measure. Finally it has been suggested that isotopes may be the key to unraveling the water transport into the stratosphere and upper troposphere. Such transport is critical both for the radiation balance and for stratospheric chemistry. Ours is the first model that is able to treat this transport. Our initial results have just been submitted to Geophys. Res. Lett (Smith et al., 2005). Essentially we are able to explain the vertical profiles of isotopes in the tropical tropopause transition layer. We are also able to account for stratospheric humidity and isotope abundances with this model. We have also been heavily involved in trying to improve our understanding of nitric acid condensation on ice. Gao et al (2004) have shown that water supersaturations above ice occur when the atmosphere is supersaturated with respect to nitric acid trihydrate. As one of the co-authors of that work, we suggested the mechanism that may explain why this is occurring. Essentially, ice does not like to grow near unit supersaturation, but does so because the water molecules can find sites on the ice surface to attach themselves to before they fly off the ice surface. This phenomena was well known in the 1960s when it was a source of debate about whether condensation and evaporation coefficients for ice would be the same. Evaporation does not require any molecular orientation, while condensation does, so it was possible that the coefficients would differ. They don't differ because the water molecules rapidly move across the surface and find places to attach. Nitric acid may be occupying these preferred sites and therefore the water molecules can't find a desirable place to attach. We anticipate that this research will be the subject of laboratory work during the coming few years. Another possibility that has been suggested is that cubic ice is forming in clouds. We have measured the vapor pressure of cubic ice, and plan to publish that result in the next few months. We have also been working on additional aspects of the condensation of nitric acid on ice. With Y. Kondo we studied the condensation of NOy on ice using the SOLVE data. Gamblin et al. have continued this work. The CRYSTAL NOy and HNO, groups have shown th their data can be fit using standard Langmuir isotherms as suggested in some, but not all, laboratory studies. We have found in the SOLVE data set that this is not the case. Moreover some laboratory studies show there are important kinetic effects that may be occurring in the atmosphere limiting the transfer of nitric acid to the ice. The SOLVE data seem consistent with these studies. We are currently re-analyzing the CRYSTAL data to look for these kinetic effects. There are a number of implications of these studies. One of the more interesting is that the nitric acid coating on ice can be used as a cloud clock to determine how long the cloud parcel has been in existence. We have also been involved with several laboratory studies. We have worked to improve the database on ice optical constants, which are critical for remote sensing. We have also studied the ways in which ice nucleates on clays. We suspect now that the standard theories used for depositional ice nucleation are completely incorrect. Further work will be needed to develop a new theory.

Toon, Owen B.↗