SEARCH · Search NASA

Results for “rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Seamless Data-Rate Change Using Punctured Convolutional Codes for Time-Varying Signal-to-Noise Ratio

In a time-varying signal-to-noise (SNR) environment, symbol rate is often changed to maximize ata return. However, the symbol-rate change has some undesirable effects such as changing the ransmission bandwidth and perhaps causing the receiver symbol loop to lose lock temporarily, thus osing some data. In this article, we are proposing an alternate way of varying the data rate without hanging the symbol rate and therefore the transmission bandwidth. The data rate change is achieved n a seamless fashion by puncturing the convolutionally encoded symbol stream to adapt to the hanging SNR environment. We have also derived an exact expression to enumerate the number of nique puncturing patterns. To demonstrate this seamless rate-change capability, we searched for good uncturing patterns for the Galileo (14, 1/4) convolutional code and changed the data rates by using the unctured codes to match the Galileo SNR profile of November 9, 1997.

Seamless Data-Rate↗

NASA NTRS2006

Erosion Rates at the Mars Exploration Rover Landing Sites and Long-Term Climate Change on Mars

Erosion rates derived from the Gusev cratered plains and the erosion of weak sulfates by saltating sand at Meridiani Planum are so slow that they argue that the present dry and desiccating environment has persisted since the Early Hesperian. In contrast, sedimentary rocks at Meridiani formed in the presence of groundwater and occasional surface water, and many Columbia Hills rocks at Gusev underwent aqueous alteration during the Late Noachian, approximately coeval with a wide variety of geomorphic indicators that indicate a wetter and likely warmer environment. Two-toned rocks, elevated ventifacts, and perched and undercut rocks indicate localized deflation of the Gusev plains and deposition of an equivalent amount of sediment into craters to form hollows, suggesting average erosion rates of approx.0.03 nm/yr. Erosion of Hesperian craters, modification of Late Amazonian craters, and the concentration of hematite concretions in the soils of Meridiani yield slightly higher average erosion rates of 1-10 nm/yr in the Amazonian. These erosion rates are 2-5 orders of magnitude lower than the slowest continental denudation rates on Earth, indicating that liquid water was not an active erosional agent. Erosion rates for Meridiani just before deposition of the sulfate-rich sediments and other eroded Noachian areas are comparable with slow denudation rates on Earth that are dominated by liquid water. Available data suggest the climate change at the landing sites from wet and likely warm to dry and desiccating occurred sometime between the Late Noachian and the beginning of the Late Hesperian (3.7-3.5 Ga).

weathering↗

NASA NTRSDate not supplied

Testing of ACC-6 Carbon-Carbon at High Strain Rates and High Temperatures

Some materials, such as steel, titanium, and tungsten, have a yield stress that depends on the strain rate, and actually are stronger at high rates of load or deformation. The increase in strength is relevant; and if not taken into account, the computer models will not match the experimental behavior observed in typical shock loading, ordnance, or ballistic tests. For higher velocity (hypervelocity impacts), an equation of state that accounts for non-linearities and temperature in the pressure-volume relation, may also be needed. This rate-dependent behavior of the strength has also been observed in some composite materials. Southwest Research Institute® (SwRI®) has started an internal research effort to measure and better model the behavior of materials, in particular carbon/carbon composites like ACC-6, at ultra-high temperatures for both static and high rates of deformation. The ultimate objective is to obtain reliable computer models of carbon/carbon material under hypersonic flight conditions, hypervelocity impacts, shock-loading situations such as booster-vehicle separation, and munition operation events. SwRI® has successfully modeled in the past ballistic impact on other composites, namely S-2 glass/epoxy, Kevlar/resin, polyethylene fibers/resin, and carbon fiber composites. This presentation will show test results relevant to the strength properties of the ACC-6 C/C material which were measured at quasistatic, medium, and the moderately high strain rates (~103 s—1) achievable in a conventional Split Hopkinson bar apparatus. Some of the tests were performed at both high-rates and high temperatures typical of hypersonic flight, something that, to the authors’ knowledge, has never been published in the past for this particular material. The test method will be presented, as well as the comparison of the stress-strain curves for the different temperatures and strain-rates of interest. A discussion of how the results can be used in the typical hydrocodes of interest will be included.

carbon/carbon↗

NASA NTRS1972

Effects of normal acceleration on transient burning rate augmentation of an aluminized solid propellant

Instantaneous burning rate data for a polybutadiene acrylic acid propellant, containing 16 weight percent aluminum, were calculated from the pressure histories of a test motor with 96.77 sq cm of burning area and a 5.08-cm-thick propellant web. Additional acceleration tests were conducted with reduced propellant web thicknesses of 3.81, 2.54, and 1.27 cm. The metallic residue collected from the various web thickness tests was characterized by weight and shape and correlated with the instantaneous burning rate measurements. Rapid depressurization extinction tests were conducted in order that surface pitting characteristics due to localized increased burning rate could be correlated with the residue analysis and the instantaneous burning rate data. The acceleration-induced burning rate augmentation was strongly dependent on propellant distance burned, or burning time, and thus was transient in nature. The results from the extinction tests and the residue analyses indicate that the transient rate augmentation was highly dependent on local enhancement of the combustion zone heat feedback to the surface by the growth of molten residue particles on or just above the burning surface. The size, shape, and number density of molten residue particles, rather than the total residue weight, determined the acceleration-induced burning rate augmentation.

Northam, G. B.↗

NASA NTRS1976

Difference thresholds for judgments of sink rate during the flare

Past studies have shown that touchdown rates of descent (sink rates) are higher in aircraft simulators than in aircraft under similar conditions. The objective of this paper was to use a psychophysical technique to investigate a pilot's ability to distinguish between two different sink rates close to the ground. The pilots observed a collimated computer graphics display of a typical runway with edge, zone, and centerline lights. The results showed that with a forward velocity of 120 knots, pilots could reliably distinguish between a sink rate of 0.5 m/sec (1.7 ft/sec) and 0.9 m/sec (2.9 ft/sec). The results also showed that the absolute rate of sink did not significantly affect the perception of sink rate. Time of sink and total height drop during the sink did affect the minimum detectable difference between sink rates (the differential threshold). The effects were such that a greater time of sink and greater height drop produced lower thresholds

Palmer, E.↗

NASA NTRS1979

Atmospheric lapse rate regimes and their parameterization

Lapse rates, moist adiabatic lapse rates and the critical lapse rate for baroclinic adjustment are calculated and compared for the mean annual, January and July states in the Northern Hemisphere. The small seasonal changes in hemispheric mean lapse rates can be attributed to counteracting seasonal changes in the strength of moist convection and baroclinic eddies. A major conclusion is that the vertical temperature structure may be well approximated by a radiative-convective equilibrium model with two critical lapse rates, viz. the moist adiabatic lapse rate and the critical lapse rate for baroclinic adjustment.

Stone, P. H.↗

NASA NTRS1979

The terrestrial cratering record. II - The crater production rate

The terrestrial crater production rate is estimated from a compilation of the locations and ages of proven and probable terrestrial impact craters and compared with that calculated from astronomical observations and for other planets. The estimated size-frequency distribution of craters greater than 20 km in diameter formed during the Phanerozoic, a -2 power law, is similar to the distributions of lunar and Martian craters. The North American and East European cratons are estimated to have cratering rates of craters greater than 20 km of 0.36 x 10 to the -14/sq km yr and 0.33 x 10 to the -14/sq km yr, respectively, in good agreement with previous estimates and observations of Apollo bodies. Comparisons with the lunar rate indicate that the lunar and terrestrial rates overlap if the cratering flux had been constant over the last 3.4 billion years, however if a constant rate was not reached until 3.0 to 2.5 billion years ago, the lunar rate would have been half that of the terrestrial rate.

Grieve, R. A. F.↗

NASA NTRS1979

Volcanic resurfacing rates and implications for volatiles on Io

The rates of volcanic resurfacing on Io are estimated on the basis of two separate observations and the implications of these rates for the volatile history of Io and the supply of material to the Jovian torus are discussed. Rates of resurfacing based on the lack of observable impact craters and assuming a Jovian cratering rate similar to those of the moon and Mars are found to be on the order of 0.1 cm/year. Estimated deposition rates of volcanic matter are found to be in general agreement with cratering rate determinations, if large particle deposition, undetected volcanic activity, volcanic flows and gas condensation are taken into account. Escape rates from Io estimated for sulfur, oxygen and sodium, based on their concentrations around Io, indicate that only a fraction of the present volcanic material can escape. Thermal and nonthermal escape mechanisms are suggested to account for the current loss of sulfur and oxygen from Io's upper atmosphere, while sputtering of atoms from the surface by impacting magnetospheric ions is suggested as the mechanism of sodium supply.

Johnson, T. V.↗

NASA NTRS1979

Block adaptive rate controlled image data compression

A block adaptive rate controlled (BARC) image data compression algorithm is described. It is noted that in the algorithm's principal rate controlled mode, image lines can be coded at selected rates by combining practical universal noiseless coding techniques with block adaptive adjustments in linear quantization. Compression of any source data at chosen rates of 3.0 bits/sample and above can be expected to yield visual image quality with imperceptible degradation. Exact reconstruction will be obtained if the one-dimensional difference entropy is below the selected compression rate. It is noted that the compressor can also be operated as a floating rate noiseless coder by simply not altering the input data quantization. Here, the universal noiseless coder ensures that the code rate is always close to the entropy. Application of BARC image data compression to the Galileo orbiter mission of Jupiter is considered.

Rice, R. F.↗

NASA NTRS1981

Comparison of radiative-convective models with constant and pressure-dependent lapse rates

One of the most commonly used models for studying climatic processes is the convective adjustment radiation model. In current radiation models, stable temperature profiles are maintained with a convective adjustment in which the temperature lapse rate is set equal to a critical lapse rate whenever the computed lapse rates exceed the critical value. First introduced by Manabe and Strickler (1964), a variety of convective adjustment models are now in use. It is pointed out that on a global scale, moist adiabatic processes, and thus moist adiabatic lapse rates, approximate the atmospheric temperature profile. Comparisons of profiles from a one-dimensional-radiative-convective model have been made using the conventional 6.5 K/km as the critical lapse rate and the pressure-dependent moist adiabatic lapse rates. For a clear sky and a single effective cloud the surface temperatures are 1 to 3 K higher with the constant 6.5 K/km critical lapse rate.

Hummel, J. R.↗

NASA NTRS1984

Temperature-dependent reaction-rate expression for oxygen recombination at Shuttle entry conditions

A temperature-dependent oxygen surface reaction-rate coefficient has been determined from experimental STS-2 heating and wall temperature data at altitudes of 77.91 km, 74.98 km, and 71.29 km. The coefficient is presented in an Arrhenius form and is shown to be less temperature dependent than previous results. Finite-rate viscous-shock-layer heating rates based on this present expression have been compared with predicted heating rates using the previous rate coefficients and with experimental heating data obtained over an extensive range of STS-2 and STS-3 entry conditions. A substantial improvement is obtained in comparison of experimental data and predicted heating rates using the present oxygen reaction-rate expression.

Zoby, E. V.↗

NASA NTRS1984

Dose rate effects in MOS microcircuits

Three read/write random access memories, AM91L24, HM1-6514, and MWS 5114, were subjected to total dose irradiation at three dose rates, with electrical testing after each increment of dosage. Annealing measurements were performed after the radiation tests were completed. The AM91L24 showed a strong dose rate effect and substantial post-irradiation annealing of radiation-induced damage. The dose rate effect was that a lower dose rate produced less net damage than an eqivalent total dose applied at a higher rate. The HM1-6514 showed essentially no dose rate effect and no annealing damage, and the MWS 5114 exhibited a moderate effect with some annealing. It was concluded that dose rate is an important parameter in radiation test procedures for MOS microcircuits and that annealing measurements may be important evaluation aids for such tests.

Cleveland, D. G.↗

NASA NTRS1986

The Nazca-South American convergence rate and the recurrence of the great 1960 Chilean earthquake

The seismic slip rate along the Chile Trench estimated from the slip in the great 1960 earthquake and the recurrence history of major earthquakes has been interpreted as consistent with the subduction rate of the Nazca plate beneath South America. The convergence rate, estimated from global relative plate motion models, depends significantly on closure of the Nazca - Antarctica - South America circuit. NUVEL-1, a new plate motion model which incorporates recently determined spreading rates on the Chile Rise, shows that the average convergence rate over the last three million years is slower than previously estimated. If this time-averaged convergence rate provides an appropriate upper bound for the seismic slip rate, either the characteristic Chilean subduction earthquake is smaller than the 1960 event, the average recurrence interval is greater than observed in the last 400 years, or both. These observations bear out the nonuniformity of plate motions on various time scales, the variability in characteristic subduction zone earthquake size, and the limitations of recurrence time estimates.

Stein, S.↗

NASA NTRS1988

Loading rate sensitivity of open hole composites in compression

The results are reported of an experimental study on the compressive, time-dependent behavior of graphite fiber reinforced polymer composite laminates with open holes. The effect of loading rate on compressive strength was determined for six material systems ranging from brittle epoxies to thermoplastics at both 75 F and 220 F. Specimens were loaded to failure using different loading rates. The slope of the strength versus elapsed time-to-failure curve was used to rank the materials' loading rate sensitivity. All of the materials had greater strength at 75 F than at 220 F. All the materials showed loading rate effects in the form of reduced failure strength for longer elapsed-time-to-failure. Loading rate sensitivity was less at 220 F than the same material at 70 F. However, C12000/ULTEM and IM7/8551-7 were more sensitive to loading rate than the other materials at 220 F. AS4/APC2 laminates with 24, 32, and 48 plies and 1/16 and 1/4 inch diameter holes were tested. The sensitivity to loading rate was less for either increasing number of plies or larger hole size. The failure of the specimens made from brittle resins was accompanied by extensive delaminations while the failure of the roughened systems was predominantly by shear crippling. Fewer delamination failures were observed at the higher temperature.

Lubowinski, Steve J.↗

NASA NTRS1990

Loading rate sensitivity of open-hole composite specimens in compression

Lubowinski, S. J.↗

NASA NTRS1992

An analysis of ridge axis gravity roughness and spreading rate

Fast and slow spreading ridges have radically different morphologic and gravimetric characteristics. In this study, altimeter measurements from the Geosat Exact Repeat Mission are used to investigate spreading rate dependence of the ridge axis gravity field. Gravity roughness provides an estimate of the amplitude of the gravity anomaly and is robust to small errors in the location of the ridge axis. Gravity roughness as a weighted root mean square of the vertical deflection at 438 ridge crossings on the mid-ocean ridge system is computed. Ridge axis gravity anomalies show a decrease in amplitude with increasing spreading rate up to an intermediate rate of about 60-80 mm/yr and almost no change at higher rates; overall the roughness decreases by a factor of 10 between the lowest and highest rates. In addition to the amplitude decrease, the range of roughness values observed at a given spreading rate shows a similar order of magnitude decrease with transition between 60 and 80 mm/yr. The transition of ridge axis gravity is most apparent at three relatively unexplored locations on the Southeast Indian Ridge and the Pacific-Antarctic Rise; on these intermediate rate ridges the transition occurs abruptly across transform faults.

Small, Christopher↗

NASA NTRS1993

Influence of heat transfer rates on pressurization of liquid/slush hydrogen propellant tanks

A multi-dimensional computational model of the pressurization process in liquid/slush hydrogen tank is developed and used to study the influence of heat flux rates at the ullage boundaries on the process. The new model computes these rates and performs an energy balance for the tank wall whereas previous multi-dimensional models required a priori specification of the boundary heat flux rates. Analyses of both liquid hydrogen and slush hydrogen pressurization were performed to expose differences between the two processes. Graphical displays are presented to establish the dependence of pressurization time, pressurant mass required, and other parameters of interest on ullage boundary heat flux rates and pressurant mass flow rate. Detailed velocity fields and temperature distributions are presented for selected cases to further illuminate the details of the pressurization process. It is demonstrated that ullage boundary heat flux rates do significantly effect the pressurization process and that minimizing heat loss from the ullage and maximizing pressurant flow rate minimizes the mass of pressurant gas required to pressurize the tank. It is further demonstrated that proper dimensionless scaling of pressure and time permit all the pressure histories examined during this study to be displayed as a single curve.

Sasmal, G. P.↗

NASA NTRS1995

Model studies of the beam-filling error for rain-rate retrieval with microwave radiometers

Low-frequency (less than 20 GHz) single-channel microwave retrievals of rain rate encounter the problem of beam-filling error. This error stems from the fact that the relationship between microwave brightness temperature and rain rate is nonlinear, coupled with the fact that the field of view is large or comparable to important scales of variability of the rain field. This means that one may not simply insert the area average of the brightness temperature into the formula for rain rate without incurring both bias and random error. The statistical heterogeneity of the rain-rate field in the footprint of the instrument is key to determining the nature of these errors. This paper makes use of a series of random rain-rate fields to study the size of the bias and random error associated with beam filling. A number of examples are analyzed in detail: the binomially distributed field, the gamma, the Gaussian, the mixed gamma, the lognormal, and the mixed lognormal ('mixed' here means there is a finite probability of no rain rate at a point of space-time). Of particular interest are the applicability of a simple error formula due to Chiu and collaborators and a formula that might hold in the large field of view limit. It is found that the simple formula holds for Gaussian rain-rate fields but begins to fail for highly skewed fields such as the mixed lognormal. While not conclusively demonstrated here, it is suggested that the notionof climatologically adjusting the retrievals to remove the beam-filling bias is a reasonable proposition.

Ha, Eunho↗