Search NASA⌕ Search

SEARCH · Search NASA

Results for “space systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Evaluation of Microwave Landing System (MLS) effect on the delivery performance of a fixed-path metering and spacing system

Metering and spacing (M & S) system's algorithms described assume an aircraft two dimensional are navigation capability. The three navigation systems compared were: very high frequency omnidirectional range/distance measuring equipment (VOR/DME) and ILS, VOR/DME and + or - 40 MLS, and VOR/DME and + or - 60 MLS. Other factors studied were M & S tentative schedule point location, route geometry effects, and approach gate location effects. Summarized results are: the MLS offers some improvement over VOR/DME and ILS if all approach routes contain computer assisted turns; pilot reaction to moving the gate closer to the runway threshold may adversely affect M & S performance; and coupling en route metering to terminal scheduling transfers most of the terminal holding to more full efficient, higher altitude en route delay.

Credeur, L.↗
NASA NTRS1989

Current analytical gaps: Future needs for large space systems

Viewgraphs on current analytical gaps for future needs for large space systems are presented. Topics covered include: future spacecraft; common control objectives; accuracy requirements; increasing complexity; promising approaches; and analytical gaps.

Taylor, Larry↗
NASA NTRSDate not supplied

Advancing Autonomy in Distributed Space Systems: Insights From on-Orbit Testing with the Starling 1.0 Mission

Autonomous decision-making is crucial for enhancing mission effectiveness in Distributed Space Systems (DSS), particularly in multi-spacecraft operations where communication constraints and mission complexity pose challenges. The Distributed Spacecraft Autonomy (DSA) team at NASA’s Ames Research Center is advancing autonomy in DSS through five key technical areas: distributed resource and task management, reactive operations, system modeling and simulation, human-swarm interaction, and ad hoc network communications. The DSA experiment onboard the Starling 1.0 Mission showcases collaborative resource allocation for multi-point science data collection with four small spacecraft. Autonomy in decision-making is highlighted as a crucial factor for multi-spacecraft missions, enabling spacecraft to operate independently, reducing reliance on ground control. This capability is particularly significant for future deep-space missions, where communication delays and limited data transmission capacity make traditional command and control approaches impractical. This demonstration focuses on a GPS Channel Selection Experiment, leveraging emergent capabilities like "shared sampling" and "simultaneous sampling" to optimize channel selection across the spacecraft swarm. The experiment aims to capture ionospheric phenomena such as the Equatorial Ionization Anomaly and Polar Patches. The DSA system's autonomous reconfiguration ability is showcased, emphasizing its adaptability to natural phenomena without significant integration efforts. The GPS Channel Selection Experiment utilizes a dual-band GPS receiver to estimate plasma density in the ionosphere. Explorative and exploitative channel selections are employed based on the nature of observed phenomena. The performance of DSA algorithms is evaluated in terms of optimal channel allocations and responsiveness to changes in observed features. The DSA Flight Software utilizes the Core Flight System (cFS) framework, ensuring compatibility with the Starling 1.0 flight mission software. DSA showcases results from RTI’s Connext DDS Micro communication middleware, enabling message routing over the Ad-Hoc Network of Starling 1.0. This paper provides a comprehensive overview of the DSA experiment's initial results, emphasizing the advancements in autonomy for Distributed Space Systems and the successful collaboration with the Starling 1.0 mission.

Caleb Ashmore Adams↗
NASA NTRS1992

A structurally adaptive space crane concept for assembling space systems on orbit

A space crane concept is presented which is based on erectable truss hardware to achieve high stiffness and low mass booms and articulating-truss joints which can be assembled on orbit. The hardware is characterized by linear load-deflection response and is structurally predictable. The crane can be reconfigured into different geometries to meet future assembly requirements. Articulating-truss joint concepts with significantly different geometries are analyzed and found to have similar static and dynamic performance, which indicates that criteria other than structural and kinematic performance can be used to select a joint. Passive damping and an open-loop preshaped command input technique greatly enhance the structural damping in the space crane and may preclude the need for an active vibrations suppression system.

Dorsey, John T.↗
NASA NTRS2005

Condensing Heat Exchanger Concept Developed for Space Systems

The current system for moisture removal and humidity control for the space shuttles and the International Space Station uses a two-stage process. Water first condenses onto fins and is pulled through "slurper bars." These bars take in a two-phase mixture of air and water that is then separated by the rotary separator. A more efficient design would remove the water directly from the air without the need of an additional water separator downstream. For the Condensing Heat Exchanger for Space Systems (CHESS) project, researchers at the NASA Glenn Research Center in collaboration with NASA Johnson Space Center are designing a condensing heat exchanger that utilizes capillary forces to collect and remove water and that can operate in varying gravitational conditions including microgravity, lunar gravity, and Martian gravity.

Hasan, Mohammad M.↗
NASA NTRS1991

Space systems propulsion technology

The following topics are presented in viewgraph form: (1) space systems propulsion technology vision; (2) orbit transfer and maneuvering propulsion; (3) modular/storable orbit transfer/maneuvering propulsion; (4) cryogenic orbital transfer vehicle (OTV) propulsion; (5) advanced propulsion; (6) high energy density matter; (7) nuclear propulsion; (8) space launch propulsion; (9) advanced launch development program technologies at the Astronautics Laboratory (AL); and (10) AL support to the National Aerospace Plane (NASP).

Hite, Dale↗
NASA NTRS1997

A Candidate Wake Vortex Strength Definition for Application to the NASA Aircraft Vortex Spacing System (AVOSS)

A significant effort is underway at NASA Langley to develop a system to provide dynamical aircraft wake vortex spacing criteria to Air Traffic Control (ATC). The system under development, the Aircraft Vortex Spacing System (AVOSS), combines the inputs of multiple subsystems to provide separation matrices with sufficient stability for use by ATC and sufficient monitoring to ensure safety. The subsystems include a meteorological subsystem, a wake behavior prediction subsystem, a wake sensor subsystem, and system integration and ATC interfaces. The proposed AVOSS is capable of using two factors, singly or in combination, for reducing in-trail spacing. These factors are wake vortex motion out of a predefined approach corridor and wake decay below a strength that is acceptable for encounter. Although basic research into the wake phenomena has historically used wake total circulation as a strength parameter, there is a requirement for a more specific strength definition that may be applied across multiple disciplines and teams to produce a real-time, automated system. This paper presents some of the limitations of previous applications of circulation to aircraft wake observations and describes the results of a preliminary effort to bound a spacing system strength definition.

Hinton, David A.↗
NASA NTRS1992

Requirements and applications for robotic servicing of military space systems

The utility of on-orbit servicing of spacecraft has been demonstrated by NASA several times using shuttle-based astronaut EVA. There has been interest in utilizing on-orbit servicing for military space systems as well. This interest has been driven by the increasing reliance of all branches of the military upon space-based assets, the growing numbers, complexity, and cost of those assets, and a desire to normalize support policies for space-based operations. Many military satellites are placed in orbits which are unduly hostile for astronaut operations and/or cannot be reached by the shuttle. In addition, some of the projected tasks may involve hazardous operations. This has led to a focus on robotic systems, instead of astronauts, for the basis of projected servicing systems. This paper describes studies and activities which will hopefully lead to on-orbit servicing being one of the tools available to military space systems designers and operators. The utility of various forms of servicing has been evaluated for present and projected systems, critical technologies have been identified, and strategies for the development and insertion of this technology into operational systems have been developed. Many of the projected plans have been adversely affected by budgetary restrictions and evolving architectures, but the fundamental benefits and requirements are well understood. A method of introducing servicing capabilities in a manner which has a low impact on the system designer and does not require the prior development of an expensive infrastructure is discussed. This can potentially lead to an evolutionary implementation of the full technology.

Ledford, Otto C., Jr.↗
NASA NTRSDate not supplied

Developing and Testing a Common Space Systems Ontology using the Ontological Modeling Language

This paper describes the development and testing of the initial version of a common space systems ontology (CoSSO) for use by the Advanced Concepts Office (ACO) at NASA's Marshall Space Flight Center. The ontology provides a shared conceptualization of concepts of interest to the ACO for modeling aerospace systems concepts in a pre-phase A context to aid with the transition to a more model-based paradigm. The ontological concepts and relations, as well as the anticipated use cases, were developed through interactions with the relevant subject matter experts at the ACO and implemented in the Ontological Modeling Language (OML). The ontology builds on the Basic Formal Ontology (BFO) and the Common Core Ontologies (CCO). While most of the ontology is still in the initial stages, an Environmental Control and Life Support System (ECLSS) ontology is being built on top of the main CoSSO and heavily developed as a proof of concept. The ECLSS ontology is designed with different use cases in mind, namely predicting and diagnosing errors in ECLS systems on long-duration missions, with a focus on the Four-Bed CO$_2$ carbon dioxide scrubber currently on board the ISS. The ECLSS ontology is being developed in a similar manner to the CoSSO, and designed to be compatible with it. The current state of both ontologies is presented and discussed, along with plans for future development and testing.

Conceptual Design↗
NASA NTRS1980

Integrated analysis of large space systems

Based on the belief that actual flight hardware development of large space systems will necessitate a formalized method of integrating the various engineering discipline analyses, an efficient highly user oriented software system capable of performing interdisciplinary design analyses with tolerable solution turnaround time is planned Specific analysis capability goals were set forth with initial emphasis given to sequential and quasi-static thermal/structural analysis and fully coupled structural/control system analysis. Subsequently, the IAC would be expanded to include a fully coupled thermal/structural/control system, electromagnetic radiation, and optical performance analyses.

Young, J. P.↗
NASA NTRS2002

Robotic Assembly of Truss Structures for Space Systems and Future Research Plans

Many initiatives under study by both the space science and earth science communities require large space systems, i.e. with apertures greater than 15 m or dimensions greater than 20 m. This paper reviews the effort in NASA Langley Research Center's Automated Structural Assembly Laboratory which laid the foundations for robotic construction of these systems. In the Automated Structural Assembly Laboratory reliable autonomous assembly and disassembly of an 8 meter planar structure composed of 102 truss elements covered by 12 panels was demonstrated. The paper reviews the hardware and software design philosophy which led to reliable operation during weeks of near continuous testing. Special attention is given to highlight the features enhancing assembly reliability.

Doggett, William↗
NASA NTRS1999

Thermal and Mechanical Microspacecraft Technologies for Deep Space Systems Program X2000 Future Deliveries

Thermal and mechanical technologies are an important part of the Deep Space Systems Technology (DSST) Program X2000 Future Deliveries (FD) microspacecraft. A wide range of future space missions are expected to utilize the technologies and the architecture developed by DSST FD. These technologies, besides being small in physical size, make the tiny spacecraft robust and flexible. The DSST FD architecture is designed to be highly reliable and suitable for a wide range of missions such as planetary landers/orbiters/flybys, earth orbiters, cometary flybys/landers/sample returns, etc. Two of the key ideas used in the development of thermal and mechanical technologies and architectures are: 1) to include several of the thermal and mechanical functions in any given single spacecraft element and 2) the architecture be modular so that it can easily be adapted to any of the future missions. One of the thermal architectures being explored for the DSST FD microspacecraft is the integrated thermal energy management of the complete spacecraft using a fluid loop. The robustness and the simplicity of the loop and the flexibility with which it can be integrated in the spacecraft have made it attractive for applications to DSST FD. Some of the thermal technologies to be developed as a part of this architecture are passive and active cooling loops, electrically variable emittance surfaces, miniature thermal switches, and specific high density electronic cooling technologies. In the mechanical area, multifunction architecture for the structural elements will be developed. The multifunction aspect is expected to substantially reduce the mass and volume of the spacecraft. Some of the technologies that will be developed are composite material panels incorporating electronics, cabling, and thermal elements in them. The paper describes the current state of the technologies and progress to be made in the thermal and mechanical technologies and approaches for the DSST Future Deliveries microspacecraft.

Birur, Gajanana C.↗
NASA NTRS1976

Advanced space system concepts and their orbital support needs (1980 - 2000). Volume 1: Executive summary

The likely system concepts which might be representative of NASA and DoD space programs in the 1980-2000 time period were studied along with the programs' likely needs for major space transportation vehicles, orbital support vehicles, and technology developments which could be shared by the military and civilian space establishments in that time period. Such needs could then be used by NASA as an input in determining the nature of its long-range development plan. The approach used was to develop a list of possible space system concepts (initiatives) in parallel with a list of needs based on consideration of the likely environments and goals of the future. The two lists thus obtained represented what could be done, regardless of need; and what should be done, regardless of capability, respectively. A set of development program plans for space application concepts was then assembled, matching needs against capabilities, and the requirements of the space concepts for support vehicles, transportation, and technology were extracted. The process was pursued in parallel for likely military and civilian programs, and the common support needs thus identified.

Bekey, I.↗
NASA NTRS1987

Large space systems requirements, deployable concepts, and technology issues

This paper summarizes some of the future civil missions requiring large space systems technologies. Antenna, collector, and reflector missions are generalized to define a similar set of system requirements and characteristics. Although many concepts exist for both deployable and space assemblable large structures, four technically mature deployable concepts are reviewed. Two of these concepts are probably applicable to only antenna/collector missions, whereas the other two employ continuous trusses which can be configured for a broad range of planar, linear, or curved structures. Finally, technology problems or needs associated with large deployable systems are reviewed to highlight additional research and development, both analytical and experimental, required to reduce mission risk.

Lovelace, U. M.↗