Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Boiler materials for ultra supercritical coal power plants

The U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) have undertaken a project aimed at identifying, evaluating, and qualifying the materials needed for the construction of the critical components of coal-fired boilers capable of operating at much higher efficiencies than current generation of supercritical plants. This increased efficiency is expected to be achieved principally through the use of advanced ultrasupercritical (A-USC) steam conditions up to 760°C (1400°F) and 35 MPa (5000 psi). A limiting factor to achieving these higher temperatures and pressures for future A-USC plants are the materials of construction. The goal of this project is to assess/develop materials technology to build and operate an A-USC boiler capable of delivering steam with conditions up to 760°C (1400°F)/35 MPa (5000 psi). The project has successfully met this goal through a focused long-term public-private consortium partnership. The project was based on an R&D plan developed by the Electric Power Research Institute (EPRI) and an industry consortium that supplemented the recommendations of several DOE workshops on the subject of advanced materials. In view of the variety of skills and expertise required for the successful completion of the proposed work, a consortium led by the Energy Industries of Ohio (EIO) with cost-sharing participation of all the major domestic boiler manufacturers, ALSTOM Power (Alstom), Babcock and Wilcox Power Generation Group, Inc. (B&W), Foster Wheeler (FW), and Riley Power, Inc. (Riley), technical management by EPRI and research conducted by Oak Ridge National Laboratory (ORNL) has been developed. The project has clearly identified and tested materials that can withstand 760°C (1400°F) steam conditions and can also make a 700°C (1300°F) plant more economically attractive. In this project, the maximum temperature capabilities of these and other available high-temperature alloys have been assessed to provide a basis for materials selection and application under a range of conditions prevailing in the boiler. A major effort involving eight tasks was completed in Phase 1. In a subsequent Phase 2 extension, the earlier defined tasks were extended to finish and enhance the Phase 1 activities. This extension included efforts in improved weld/weldment performance, development of longer-term material property databases, additional field (in-plant) corrosion testing, improved understanding of long-term oxidation kinetics and exfoliation, cyclic operation, and fabrication methods for waterwalls. In addition, preliminary work was undertaken to model an oxyfuel boiler to define local environments expected to occur and to study corrosion behavior of alloys under these conditions. This final technical report provides a comprehensive summary of all the work undertaken by the consortium and the research findings from all eight (8) technical tasks including A-USC boiler design and economics (Task 1), long-term materials properties (Task 2), steam- side oxidation (Task 3), Fireside Corrosion (Task 4), Welding (Task 5), Fabricability (Task 6), Coatings (Task 7), and Design Data and Rules (Task 8).

01 COAL, LIGNITE, AND PEAT↗

High pressure synthesis of a new phase of YbAg 2 : Structure, valence of Yb and properties

The new phase of YbAg 2 was obtained using high-pressure and high-temperature reaction. YbAg 2 crystallizes in the MgZn 2 structure (the space group P6 3 /mmc space group, No 194) with a = 5.68153(3) Å and c = 9.31995(7) Å and the unit cell volume V = 260.54(3) Å 3 . The XANES analysis showed that the valence state of Yb is +2.8. The low-temperature dependences of the electrical resistivity and magnetic susceptibility can be adequately described by a T 2 term that supports the Fermi-liquid picture. Furthermore, the Kadowaki–Woods relation gives a low value of the degeneracy (N = 2).

36 MATERIALS SCIENCE↗

Airspace Technology Demonstration 2 (ATD-2): Analysis of APREQ Flights at CLT

5/22/2019 National Aeronautics and Space Administration 1 Airspace Technology Demonstration 2 (ATD-2) Analysis of APREQ Flights at CLT May 22, 2019 5/22/2019 Objective 2 Quantify impact of IADS Phase 1 & 2 capabilities on APREQ flights at CLT with respect to: • Compliance to the Controlled Take Off Time (CTOT) • Benefits for APREQ flights that use IDAC to renegotiate for an earlier CTOT • Benefits of pre-scheduling APREQ flights using the Earliest Off Block Time (EOBT) • Relationship between EOBT compliance and rescheduling CTOT 5/22/2019 CLT APREQ Daily Compliance(Compliance Improvement Since ATD-2 Start) 3 Steady increase of APREQ compliance over the life of the project. Reduced variation in compliance leading to improved predictability. In addition to overall improved compliance into TBM systems, the predictability is increasing 5/22/2019 APREQ Compliance 10K Rolling Window 4 The most substantial APREQ compliance improvements started with Phase 2 capability (AEFS integration, ZTL IDAC, pre-scheduling and scheduler updates). 5/22/2019 IADS Phase 1 & 2 Benefit Mechanisms 5 1. Collaborative surface metering •Reduced engine run time •Reduced fuel consumption and emissions 2. Overhead stream operational integration a.Scheduling controlled flights at the gate •Reduced engine run time •Reduced fuel consumption and emissions b.APREQ renegotiating for an earlier slot •Reduced total delay •Passenger value of time and crew costs •Reduced engine run time •Reduced fuel consumption and emissions Benefits (1) and (2a) achieved through tactical gate holds Benefit (2b) achieved through APREQ renegotiation process described below Step 1: APREQ flight has a release time but is capable of taking off earlier Step 2: FAA TMC uses the IDAC green space / red space to identify and request an earlierslot in the overhead stream Step 3: Aircraft receives earlierrelease time and the difference between the release times is the reduction in delay 5/22/2019 Benefits for APREQ flights using IDAC to renegotiate for earlierCTOT 6 LBS Fuel 270.7 hours of delay saved by electronically renegotiating a better overhead stream time for 2,071 flights. • The benefits described here are associated with better use of existing capacity in the overhead stream, and technology to reduce surface delay. •These benefits are in addition to (distinct from) surface metering savings. 5/22/2019 APREQ Delay For Pre-Scheduled Flights into KATL Have Been Reduced and are More Predictable For the Last Five Months 7 Substantial Improvements in predictability of delay for the last 5 months 5/22/2019 EOBT Compliance / CTOT Reschedulefor Pre-Scheduled Flights into KATL 8 5/22/2019 Wrap-up 9 • Compliance to the CTOT has improved throughout the lifecycle of ATD-2 with biggest improvements following the introduction of Phase 2 capabilities • Rescheduling APREQ flights using IDAC has reduced 270.7 hours of delay at CLT • Predictability of local surface delay for APREQ flights is substantially improved via pre-scheduling with the IADS system • Pre-scheduled flights that reschedule for later times tend to call ready later with respect to EOBT

CLT↗

Nickel deficiency in RENi{sub 2-x}P{sub 2} (RE=La, Ce, Pr). Combined crystallographic and physical property studies

Large single crystals from RENi{sub 2-x}P{sub 2} (RE=La, Ce, Pr) were synthesized from the pure elements using Sn as a metal flux, and their structures were established by X-ray crystallography. The title compounds were confirmed to crystallize in the body-centered tetragonal ThCr{sub 2}Si{sub 2} structure type (space group I4/mmm (No. 139); Pearson's symbol tI10), but with a significant homogeneity range with respect to the transition metal. Systematic synthetic work, coupled with accurate structure refinements indicated strong correlation between the degree of Ni-deficiency and the reaction conditions. According to the temperature dependent dc magnetization measurements, LaNi{sub 2-x}P{sub 2} (x=0.30(1)), as expected, is Pauli-like paramagnetic in the studied temperature regime, while the Ce-analog CeNi{sub 2-x}P{sub 2} (x=0.28(1)) shows the characteristics of a mixed valent Ce{sup 3+}/Ce{sup 4+} system with a possible Kondo temperature scale on the order of 1000 K. For three different PrNi{sub 2-x}P{sub 2} (x<=0.5) samples, the temperature and field dependence of the magnetization indicated typical local moment 4f-magnetism and a stable Pr{sup 3+} ground state, with subtle variations of T{sub C} as a function of the concentration of Ni defects. Field-dependent heat capacity data for CeNi{sub 2-x}P{sub 2} (x=0.28(1)) and PrNi{sub 2-x}P{sub 2} (x=0.53(1)) are discussed as well. - Graphical abstract: The non-stoichiometric RENi{sub 2-x}P{sub 2} phases (RE=La, Ce, Pr), whose average structure belongs to the ThCr{sub 2}Si{sub 2} type, are shown to exist with a wide range of defects on the transition metal site. The changes in the Ni-underoccupancy affect the magnetism of the synthesized materials.

36 MATERIALS SCIENCE↗

An integrated Imaging and Modeling Toolbox for Accelerated Development of Root-focused Crops at Field Scales

This project, led by Yuxin Wu at the LBNL, was proposed to develop an integrated imaging-modeling toolbox allowing for accelerated development of root-focused crops at field scales. Our approach is based on a novel root phenotyping method we termed Tomographic Electrical Rhizosphere Imaging (TERI), which provides advanced phenotyping of key root traits by sensing the electrical impedance response of roots and soil to external electrical excitations, and mapping these responses to root and soil properties. The role of Noble Research Institute in this project is to assist TERI model establishment and validation by collecting various above- and below-ground traits data from container- and field-grown plants (mainly wheat). Over the last three years, Noble Research Institute has conducted 3 phases of experiments as proposed including: (Phase 1) greenhouse and hoop-house experiments in wheat and pecan plants grown under controlled container-grown conditions; (Phase 2) space-planted individual plant field experiment using different wheat varieties; and (Phase 3) small-plot planted field experiment using different wheat varieties, as well as using different small grains species including wheat, rye, triticale, oat and barley for increasing plant variation.

60 APPLIED LIFE SCIENCES↗

Towards a Workforce Roadmap for Distributed Wind: Phase 1 - Identifying Needs and Barriers

Despite recent policy, research efforts, and resources available for utility-scale and offshore wind workforce development, the distributed wind (DW) industry has yet to make similar advances to address its workforce challenges. This report initiates the phased development of a DW workforce roadmap to provide a foundation for roadmap development. Phase 1, contained in this report, uses desk-based research on clean energy workforce approaches and a DW interested-party survey to discuss needs and barriers hindering the workforce from expanding. Findings are summarized into goals and solutions for Phase 2 of roadmap development, which identifies actors responsible for implementing solutions identified in Phase 1. Phase 1 results suggest that the sector's small size and limited growth motivate the short-term need for skilled workers or candidates with well-rounded and multifaceted abilities. Long-term expansion plans must diversify positions while capitalizing on existing utility-scale wind and offshore workforce efforts, as well as other renewable sector best practices where possible. The findings in this report can advance workforce development in the DW sector by aligning interested industry parties around common goals to address challenges. Training providers, installers, operators, manufacturers, federal agencies, national laboratories, academic partners, and labor unions can utilize the findings to help promote sustainable growth of the DW sector.

17 WIND ENERGY↗

General approach and scope

This paper describes a joint activity involving NASA and Army researchers at the NASA Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for all of the important interactions among the disciplines. The disciplines involved include rotor aerodynamics, rotor dynamics, rotor structures, airframe dynamics, and acoustics. The work is focused on combining these five key disciplines in an optimization procedure capable of designing a rotor system to satisfy multidisciplinary design requirements. Fundamental to the plan is a three-phased approach. In phase 1, the disciplines of blade dynamics, blade aerodynamics, and blade structure will be closely coupled, while acoustics and airframe dynamics will be decoupled and be accounted for as effective constraints on the design for the first three disciplines. In phase 2, acoustics is to be integrated with the first three disciplines. Finally, in phase 3, airframe dynamics will be fully integrated with the other four disciplines. This paper deals with details of the phase 1 approach and includes details of the optimization formulation, design variables, constraints, and objective function, as well as details of discipline interactions, analysis methods, and methods for validating the procedure.

Adelman, Howard M.↗

Comparison of Magnetospheric MultiScale (MMS) Formation Design Algorithms

The MMS mission consists of four identical spinning spacecraft in a tetrahedron-like formation during predefined orbital regions-of-interest [1]. The MMS formation will fly about a highly eccentric orbit to study magnetic reconnection in the Earth.s magnetosphere. The mission is divided in two main science phases of markedly different orbit size. Phase 1 is a 1.2 R(sub E) x 12 R(sub E) (R(sub E) equals one Earth radius) orbit phase where science will be performed on the day-side of the magnetosphere, and Phase 2 is a 1.2 R(sub E) x 25 R(sub E) orbit phase where science will be performed on the night-side of the magnetosphere. For each phase, the MMS formation initially will fly a series of tetrahedron sizes ranging between 10-km and 400-km to assist the science team in determining the best value for the remainder of the phase. This paper presents a preliminary comparison of the algorithms currently available to determine desired MMS formation states. After a brief description of the MMS formation flying metrics and associated requirements, the five formation design algorithm combinations considered here are presented. Monte Carlo simulations determine the performance of each algorithm defined in terms of formation lifetime and fuel consumption. Preliminary results focusing on the smaller formation size for Phase 1 are discussed and the conclusions are presented along with indications for future work.

Mann, L.↗

From 3D Printing Lunar and Mars Habitats to Affordable Sustainable Housing on Earth

In 2015, the NASA Centennial Challenges program launched the 3D-Printed Habitat (3DPH) competition to develop housing solutions for extended-duration missions on planetary surfaces using advanced additive construction technology. The challenge was executed in three phases with increasing complexities and requirements. The main goal of the competition was to use of planetary indigenous materials and mission recyclables as feedstock for large-scale, autonomous 3D printers to construct a habitat on the Moon or Mars. Phase 1 challenged teams to develop state-of-the-art architecture concepts that took advantage of unique capabilities offered by 3D-printing. In Phase 2, teams autonomously 3D-printed structural components using terrestrial/space-based materials and recyclables. Phase 3 tasked competitors to fabricate sub-scale habitats using indigenous materials with or without mission-generated recyclables and ended in a head-to-head competition. The developments from this challenge are applicable both to the fulfillment of NASA’s Moon to Mars mission and to the creation of affordable and sustainable housing solutions on Earth. This paper will summarize the results of the four-year challenge and provide an overview of team achievements as a result of the competition. Results from the competition include humanitarian and business opportunities created/negotiated and the development of 3D-printed housing solutions for people such those in need of shelter in Austin, Texas and 3D-printing houses at the United Nations habitat headquarters in Nairobi, Keyna. The Phase 3: Level 5 winner, AI. SpaceFactory, is currently 3D-printing an ecofriendly house in New York called Terra, a full-size habitat design for Mars and available on Earth.

M C Roman↗

Phase Change Processes for Thermal Management Systems and Science Investigations

This white paper focuses on the scientific rationale and motivation for deploying phase change processes-based spacecraft thermal management systems for space missions [1,2]. Phase change processes need to be implemented in the design of various life support systems, sub-critical cryogenic and thermal control systems, taking advantage of the latent heat of phase change so as to significantly increase the heat transfer rate per unit fluid mass. Experimental data are critical to understanding gravitational effects on complex phase change processes using novel materials and working fluids. Experimental data can be acquired by either designing new testing platforms or performing experiments with simulant fluids on existing microgravity platforms. With the acquired data, theoretical flow physics models and numerical simulations can then be validated for use under long-duration microgravity conditions. The acquired data and validated models will enable the deployment of game-changing thermal management systems with remarkably improved efficiency and stability in heat acquisition, transport, and rejection for long-duration space missions.

Fluid mechanics↗

Syntheses, and crystal and electronic structures of the new Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb): Structural relationship with Yb{sub 2}CdSb{sub 2} and the solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2}

Presented are the details of the syntheses, crystal and electronic structures of a new family of Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb), as well as the solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2}. The structures of Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) were determined to be of a new type with the non-centrosymmetric space group Pmc2{sub 1} (no. 26), Pearson symbol oP12, with lattice parameters a=4.684(1)-4.788(1) A; b=9.099(3)-9.117(2) A; c=7.837(1)-8.057(2) A for the Na{sub 2}ACdSb{sub 2} series, and a=4.6637(9)-5.0368(8) A; b=9.100(2)-9.8183(15) A; and c=7.7954(15)-8.4924(13) A for K{sub 2}ACdSb{sub 2}, respectively. The solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (x{approx}1) are isostructural and isoelectronic to the recently reported Yb{sub 2}CdSb{sub 2} (space group Cmc2{sub 1} (no. 36), Pearson symbol cP20). All discussed structures are based upon CdSb{sub 2}{sup 4-} polyanionic layers, similar to the ones observed in Yb{sub 2}CdSb{sub 2}, with various alkali- and/or alkaline-earth cations coordinated to them. Magnetic susceptibility and Seebeck coefficient measurements on selected Eu{sub 2-x}Yb{sub x}CdSb{sub 2} samples, taken at low temperatures up to 300 K, are also reported. -- Graphical abstract: The quaternary Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) with novel layered structures have been synthesized for the first time and structurally characterized by single-crystal X-ray diffraction. Reported as well are the results from crystallographic and property studies of the closely related solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} (x{approx}1), and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x{<=}2). Display Omitted Research highlights: {yields} Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) are new quaternary Zintl phases. {yields} Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} (x{approx}1), and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x<2) are solid solutions. {yields} Both structures are layered, based on corner-shared CdSb{sub 4} tetrahedra. {yields} Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x<2) exhibit high Seebeck coefficient (217 {mu}V/K at RT).

36 MATERIALS SCIENCE↗

Oxygen point defect accumulation in single-phase U O 2 + x

UO 2.07 was characterized using neutron total scattering in order to elucidate defect morphology in the low oxygen-to-metal regime (x < 0.125 for UO 2+x ). Data were collected at temperatures (600 and 1000 °C) coinciding with the single-phase UO 2+x region of the established phase diagram, and results were compared with data of stoichiometric UO 2 collected at near-identical temperatures. Experimental data were modeled and interpreted using a holistic approach employing a combination of analyses that characterized multiple spatial length scales. Preferential modeling of long-range atomic arrangements with Rietveld refinement suggests the existence of primarily monointerstitials in UO 2.07 , whereas preferential modeling of short-range atomic structures with small-box pair distribution function (PDF) refinement indicates the presence of defect clusters in UO 2.07 . Simultaneous modeling of multiple length scales using complementary reverse Monte Carlo (RMC) and molecular dynamics (MD) methods confirms that excess oxygen atoms in UO 2.07 exist as small defects, such as monointerstitials and di-interstitials. RMC and MD results agree with diffraction analysis but differ significantly from small-box PDF refinements, which may be related to a lack of intermediate- and long-range structural information gained from the small-box PDF refinement procedure. Employing a combination of analysis methods with varying length-scale sensitivities enabled more accurate assessment of the UO 2+x defect structure. Furthermore, our findings provide experimental support for previously predicted di-interstitial defect morphologies in UO 2+x that highly influence the accurate prediction of bulk physiochemical properties of UO 2+x , such as oxygen diffusivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Distribution and speciation of rare earth elements in coal combustion by-products via synchrotron microscopy and spectroscopy

Rare earth element (REE) binding environments and associated mineral phases in coal and coal combustion byproducts (CCBs) are not well understood. Advanced characterization of REEs' binding environments before, during, and after production can be vital in establishing an economically viable recovery method for REEs from these materials. Here, this study characterized different REE distributions, cerium (Ce) oxidation states, and Ce binding environments in 11 CCBs collected from various locales via X-ray fluorescence (XRF) elemental mapping and X-ray absorption near edge structure (XANES) at Stanford Synchrotron Radiation Lightsource (SSRL). Bulk Ce LIII edge XANES identified Ce(III) (>85%) as the predominant Ce oxidation state in all studied samples. Ce speciation and XRF elemental map analyses further reveal the REEs in studied samples can be (1) dispersed throughout the aluminosilicate glass phase, (2) as micro-particles in large glass grain, or (3) as independent trace phases in studied samples. Both fly ash and bottom ash contain mainly Ce(III) micro-hotspots (<40 μm), co-localization with a range of elements, including, but not limited to: P, S, Ca, Ti, and Mn. At microscale, Ce can change from Ce(III) to mixture of Ce(III) and Ce(IV) and to 100% Ce(IV) oxide, revealing potential REE-phase decomposition and oxidation in coal and coal combustion process. Our study also observed intraparticle and interparticle distribution difference between light REEs and heavy REEs. Finally, the synchrotron-based characterization confirmed the presence of these trace, previously only theorized, phases during the combustion process and ultimately may inform the simplification of separation and extraction processes for REE from different CCBs.

36 MATERIALS SCIENCE↗

Sodium intercalation in the phosphosulfate cathode NaFe 2 (PO 4 )(SO 4 ) 2

The compound NaFe 2 (PO 4 )(SO 4 ) 2 is successfully synthesized via a solid state reaction route and its crystal structure is determined using powder X-ray diffraction data. NaFe 2 (PO 4 )(SO 4 ) 2 phase is also characterized by cyclic voltammetry, galvanostatic cycling and electrochemical impedance spectroscopy. NaFe 2 (PO 4 )(SO 4 ) 2 crystallizes with the well-known NASICON-type structure. SAED and HRTEM experiments confirm the structural model, and no ordering between the PO 4 -3 and SO 4 -2 polyanions is detected. The electrochemical tests indicate that NaFe 2 (PO 4 )(SO 4 ) 2 is a 3 V sodium intercalating cathode. The electrical conductivity is relatively low (2.2 × 10 -6 Scm -1 at 200 °C) and the obtained activation energy is ~0.60eV. The GITT experiments indicate that the diffusivity values are in the range of 10 -11 -10 -12 cm 2 /s within the measured sodium concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase coexistence and electric-field control of toroidal order in oxide superlattices

Systems that exhibit phase competition, order parameter coexistence, and emergent order parameter topologies constitute a major part of modern condensed-matter physics. Here, by applying a range of characterization techniques, and simulations, we observe that in PbTiO 3 /SrTiO 3 superlattices all of these effects can be found. By exploring superlattice period-, temperature- and field-dependent evolution of these structures, we observe several new features. First, it is possible to engineer phase coexistence mediated by a first-order phase transition between an emergent, low-temperature vortex phase with electric toroidal order and a high-temperature ferroelectric a 1 /a 2 phase. At room temperature, the coexisting vortex and ferroelectric phases form a mesoscale, fibre-textured hierarchical superstructure. The vortex phase possesses an axial polarization, set by the net polarization of the surrounding ferroelectric domains, such that it possesses a multi-order-parameter state and belongs to a class of gyrotropic electrotoroidal compounds. Finally, application of electric fields to this mixed-phase system permits interconversion between the vortex and the ferroelectric phases concomitant with order-of-magnitude changes in piezoelectric and nonlinear optical responses. Here, our findings suggest new cross-coupled functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EXAFS measurements on Mn doped CaF{sub 2} phosphor with different Mn concentrations

Extended X-ray Absorption Fine Structure (EXAFS) measurements have been carried out on Mn doped CaF{sub 2} phosphors with synchrotron radiation at the Mn K edge. Measurements have been carried out on samples prepared with different concentrations of Mn dopants. The data have been analyzed to find out the Mn-F bond lengths and % of Mn doped CaF{sub 2} phase in the samples. The change in thermoluminescence glow peak temperature in CaF{sub 2}:Mn phosphor with variation in Mn concentration has been correlated to the parameters obtained from EXAFS measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast x-ray scattering of photodissociation dynamics in 2-iodothiophene

Here, a time-resolved x-ray scattering (TRXS) investigation of the photodissociation dynamics of gas-phase 2-iodothiophene molecules following 252 nm excitation is presented. Structural evolution of the molecule and dynamical information on the resulting photofragments were captured using femtosecond x-ray free-electron laser pulses. Two dissociation pathways were identified, arising via excitation to ππ* and (n/π)σ* states, respectively, yielding distinct interfragment recoil velocities of ∼6.4 Åps −1 and 17.0 Åps −1 . A comparison of asymptotic scattering data with simulated patterns indicates that the thiophene ring remains closed following dissociation at this wavelength. Modeling the experimental data yields a branching ratio of ∼3:1 in favor of the high velocity channel. These findings demonstrate the capability of TRXS to disentangle concurrent ultrafast reaction pathways and provide detailed structural insight into energy redistribution during photoinduced bond fission in complex molecular systems.

Razmus, Weronika O. [Univ. of Southampton (United ↗

Refine your search to explore more results.