Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic linear model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Properties of Intense Field-Aligned Lower-Band Chorus Waves: Implications for Nonlinear Wave-Particle Interactions: INTENSE FIELD-ALIGNED CHORUS WAVE-PACKETS

Resonant interactions between electrons and chorus waves are responsible for a wide range of phenomena in near-Earth space (e.g., diffuse aurora and acceleration of > 1 MeV electrons). Although quasi-linear diffusion is believed to be the primary paradigm for describing such interactions, an increasing number of investigations suggest that nonlinear effects are also important in controlling the rapid dynamics of electrons. However, present models of nonlinear wave-particle interactions, which have been successfully used to describe individual short-term events, are not directly applicable for a statistical evaluation of nonlinear effects and the long-term dynamics of the outer radiation belt, because they lack information on the properties of intense (nonlinearly resonating with electrons) chorus waves. In this paper, we use the Time History of Events and Macroscale Interactions during Substorms and Van Allen Probes data sets of field-aligned chorus waveforms to study two key characteristics of these waves: effective amplitude Β w (nonlinear interaction can occur when Β w >2) and wave packet length β (the number of wave periods within it). While as many as 10–15% of chorus wave packets are sufficiently intense (Β w >2–3) to interact nonlinearly with relativistic electrons, most of them are short (β < 10) reducing the efficacy of such interactions. Revised models of nonlinear interactions are thus needed to account for the long-term effects of these common, intense but short chorus wave packets. We also discuss the dependence of Β w , β on location (MLT and L-shell) and on the properties of the suprathermal electron population.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure dependent lattice specific heat and mode Grueneisen parameters for group III nitrides

The pressure dependent lattice specific heat and mode Grueneisen parameters for III-V nitrides have been calculated using a lattice dynamical model namely the rigid ion model which consists of a usual long range and short range potential. The Murnaghan's equation of state is adopted for relating the volume dependence with pressure. The non linear least square fitting procedures to obtain the model parameters have been used. The results obtained using the present model calculation on mode Grueneisen parameters and specific are compared with existing experimental data and found in good agreement. There is a increase in in specific heat with pressure. The mode Grueneisen parameters show that the TA phonon mode is responsible for phase transition.

36 MATERIALS SCIENCE↗

THE EVOLUTION OF LOW-REDSHIFT GALAXY STRUCTURES

Ellipticities for 6188 low-redshift (z < 0.18) poor and rich galaxy structures have been examined along with their evolution using an optical observational base that is statistically complete. The shape of each structure projected on the celestial sphere was determined using the covariance ellipse method. Analysis of the data indicates that structure ellipticity changes with redshift, being smaller for nearby objects and greater for those located further away. Such a change is also described better by quadratic or exponential relations than by a simple linear scheme. It is concluded that between redshifts of z = 0.18 and z = 0 we observe the dynamical evolution of galaxy clusters. Such a change in ellipticity with redshift is expected in {lambda}CDM models.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure formation in f(R) gravity: a distinguishing probe between the dark energy and modified gravity

In this work, we study the large scale structure formation in the modified gravity in the framework of Palatini formalism and compare the results with the equivalent smooth dark energy models as a tool to distinguish between these models. Through the inverse method, we reconstruct the dynamics of universe, modified gravity action and the structure formation indicators like the screened mass function and gravitational slip parameter. Consequently, we extract the matter density power spectrum for these two models in the linear regime and show that the modified gravity and dark energy models predictions are slightly different from each other at large scales. It is also shown that the growth index in the modified gravity unlike to the dark energy models is a scale dependent parameter. We also compare the results with those from the modified gravity in the metric formalism. The modification on the structure formation can also change the CMB spectrum at large scales however due to the cosmic variance it is hard to detect this signature. We show that a large number of SNIa data in the order of 2000 will enable us to reconstruct the modified gravity action with a suitable confidence level and test the cosmic acceleration models by the structure formation.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTIDIMENSIONAL MODELING OF CORONAL RAIN DYNAMICS

We present the first multidimensional, magnetohydrodynamic simulations that capture the initial formation and long-term sustainment of the enigmatic coronal rain phenomenon. We demonstrate how thermal instability can induce a spectacular display of in situ forming blob-like condensations which then start their intimate ballet on top of initially linear force-free arcades. Our magnetic arcades host a chromospheric, transition region, and coronal plasma. Following coronal rain dynamics for over 80 minutes of physical time, we collect enough statistics to quantify blob widths, lengths, velocity distributions, and other characteristics which directly match modern observational knowledge. Our virtual coronal rain displays the deformation of blobs into V-shaped features, interactions of blobs due to mostly pressure-mediated levitations, and gives the first views of blobs that evaporate in situ or are siphoned over the apex of the background arcade. Our simulations pave the way for systematic surveys of coronal rain showers in true multidimensional settings to connect parameterized heating prescriptions with rain statistics, ultimately allowing us to quantify the coronal heating input.

79 ASTRONOMY AND ASTROPHYSICS↗

Hubble expansion and structure formation in time varying vacuum models

We investigate the properties of the FLRW flat cosmological models in which the vacuum energy density evolves with time, {lambda}(t). Using different versions of the {lambda}(t) model, namely, quantum field vacuum, power series vacuum and power law vacuum, we find that the main cosmological functions such as the scale factor of the Universe, the Hubble expansion rate H, and the energy densities are defined analytically. Performing a joint likelihood analysis of the recent supernovae type Ia data, the cosmic microwave background shift parameter and the baryonic acoustic oscillations traced by the Sloan Digital Sky Survey galaxies, we put tight constraints on the main cosmological parameters of the {lambda}(t) scenarios. Furthermore, we study the linear matter fluctuation field of the above vacuum models. We find that the patterns of the power series vacuum {lambda}=n{sub 1}H+n{sub 2}H{sup 2} predict stronger small scale dynamics, which implies a faster growth rate of perturbations with respect to the other two vacuum cases (quantum field and power law), despite the fact that all the cosmological models share the same equation of state parameter. In the case of the quantum field vacuum {lambda}=n{sub 0}+n{sub 2}H{sup 2}, the corresponding matter fluctuation field resembles that of the traditional {lambda} cosmology. The power law vacuum ({lambda}{proportional_to}a{sup -n}) mimics the classical quintessence cosmology, the best fit being tilted in the phantom phase. In this framework, we compare the observed growth rate of clustering measured from the optical galaxies with those predicted by the current {lambda}(t) models. Performing a Kolmogorov-Smirnov statistical test we show that the cosmological models which contain a constant vacuum ({lambda}CDM), quantum field vacuum, and power law vacuum provide growth rates that match well with the observed growth rate. However, this is not the case for the power series vacuum models (in particular, the frequently adduced {lambda}{proportional_to}H model) in which clusters form at significantly earlier times (z{>=}4) with respect to all other models (z{approx}2). Finally, we derived the theoretically predicted dark matter halo mass function and the corresponding distribution of cluster-size halos for all the models studied. Their expected redshift distribution indicates that it will be difficult to distinguish the closely resembling models (constant vacuum, quantum field, and power law vacuum), using realistic future x-ray surveys of cluster abundances. However, cluster surveys based on the Sunayev-Zeldovich detection method give some hope to distinguish the closely resembling models at high redshifts.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent Reaction between Molecular and Atomic Bose-Einstein Condensates: Integrable Model

Here, we solve a model that describes a stimulated conversion between ultracold bosonic atoms and molecules. The reaction is triggered by a linearly time-dependent transition throughout the Feshbach resonance. Our solution predicts a dependence, with a dynamic phase transition, of the reaction efficiency on the transition rate for both atoms-to-molecule pairing and molecular dissociation processes. We find that for the latter process with a linear energy dispersion of atomic modes, the emerging phase can have a thermalized energy distribution of noninteracting bosons with the temperature defined by the rate of the transition. This provides a simple interpretation of the phase transition in terms of the creation of equilibrium Bose-Einstein condensate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Wave fluctuations in the system with some Yang-Mills condensates

Self-consistent dynamics of non-homogeneous fluctuations and homogeneous and isotropic condensate of Yang–Mills fields was investigated in zero, linear and quasilinear approximations over the wave modes in the framework of N = 4 supersymmetric model in Hamilton gauge in quasiclassical theory. The models with SU(2), SU(3) and SU(4) gauge groups were considered. Particle production effect and effect of generation of longitudinal oscillations were obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elucidating the Mechanical Energy for Cyclization of a DNA Origami Tile

DNA origami has emerged as a versatile method to synthesize nanostructures with high precision. This bottom-up self-assembly approach can produce not only complex static architectures, but also dynamic reconfigurable structures with tunable properties. While DNA origami has been explored increasingly for diverse applications, such as biomedical and biophysical tools, related mechanics are also under active investigation. Here we studied the structural properties of DNA origami and investigated the energy needed to deform the DNA structures. We used a single-layer rectangular DNA origami tile as a model system and studied its cyclization process. This origami tile was designed with an inherent twist by placing crossovers every 16 base-pairs (bp), corresponding to a helical pitch of 10.67 bp/turn, which is slightly different from that of native B-form DNA (~10.5 bp/turn). We used molecular dynamics (MD) simulations based on a coarse-grained model on an open-source computational platform, oxDNA. We calculated the energies needed to overcome the initial curvature and induce mechanical deformation by applying linear spring forces. We found that the initial curvature may be overcome gradually during cyclization and a total of ~33.1 kcal/mol is required to complete the deformation. These results provide insights into the DNA origami mechanics and should be useful for diverse applications such as adaptive reconfiguration and energy absorption.

59 BASIC BIOLOGICAL SCIENCES↗

The structure and circulation of the deep Venus atmosphere

A simple model for the structure of a nonrotating Hadley regime in an atmosphere with large thermal inertia is developed. The radiative fluxes are estimated by using a linearization about the radiative equilibrium state, and the dynamical fluxes are estimated by using scaling analysis. The requirement that differential heating by these fluxes be in balance in both the meridional and vertical directions leads to two equations for the mean static stability and meridional temperature contrast. The solution depends on two parameters: the strength of the radiative heating, as measured by the static stability of the radiative equilibrium state; and the ratio of the time it takes an external gravity wave to traverse the atmosphere to the time it would take the atmosphere to cool off radiatively. It is shown that it is not necessary to invoke convection to explain the approximate adiabatic lapse rate in the Venus atmosphere, but a greenhouse effect is necessary to explain the high surface temperatures.

Stone, P. H.↗

Differential rotation in a solar-driven quasi-axisymmetric circulation

The concept of a quasi-axisymmetric circulation is used to explore the global scale dynamics of planetary atmospheres. A numerical circulation model applicable to Jupiter is presented, and an analytical study is performed elucidating the conditions leading to differential rotation in an atmosphere which is convectively unstable. A linear system forced by solar differential heating is considered, with nonlinear effects arising from advection being represented in the form of eddy diffusion. An empirical, latitudinal spectrum of the observed zonal wind field on Jupiter is discussed. Numerical solutions are presented which reveal banded wind fields with alternating and equatorial zonal jets and a multicellular Ferrel-Thomson meridional circulation consistent with the observed cloud striations on Jupiter. The vertical derivatives are parameterized to construct a simplified one-layer model.

Mayr, H. G.↗

Down-to-earth supercomputing at NASA Ames

The requirements for computers for aerospace vehicle design problems, in particular fluid dynamics, are examined. The levels of approximation to Navier-Stokes equations are: (1) linearized inviscid form, (2) nonlinear inviscid equation, (3) Reynolds-averaged Navier-Stokes equation, (4) large eddy simulation with models for subgrid scale turbulence, and (5) full Navier-Stokes equations to calculate laminar/turbulent transition and turbulence dissipation. The Cray 2 with 256 megaword memory and 4.1 nsec clock and the Cray X-MP/48 with a 128 megaword memory and a 9.5 nsec clock of the Ames facility are described, and an example revealing their applicability is presented. The use of zonal methods to simulate aerodynamic flow fields numerically is discussed. Consideration is given to the development of a program for simulation of aerodynamic flow fields, the compilers, symbolic debuggers, the scheduling of multiple CPUs, and the analysis and storage of the data.

Stevens, Kenneth G., Jr.↗

Modelling and control of two coordinated robot arms

Two coordinated robot arms are modeled by considering the two arms as working on the same object simultaneously and as a closed kinematic chain. In both formulations, a novel dynamic control method is used which is based on feedback linearization and simultaneous output decoupling.

Tarn, T. J.↗

A method for the modelling of porous and solid wind tunnel walls in computational fluid dynamics codes

Porous wall wind tunnels have been used for several decades and have proven effective in reducing wall interference effects in both low speed and transonic testing. They allow for testing through Mach 1, reduce blockage effects and reduce shock wave reflections in the test section. Their usefulness in developing computational fluid dynamics (CFD) codes has been limited, however, by the difficulties associated with modelling the effect of a porous wall in CFD codes. Previous approaches to modelling porous wall effects have depended either upon a simplified linear boundary condition, which has proven inadequate, or upon detailed measurements of the normal velocity near the wall, which require extensive wind tunnel time. The current work was initiated in an effort to find a simple, accurate method of modelling a porous wall boundary condition in CFD codes. The development of such a method would allow data from porous wall wind tunnels to be used more readily in validating CFD codes. This would be beneficial when transonic validations are desired, or when large models are used to achieve high Reynolds numbers in testing. A computational and experimental study was undertaken to investigate a new method of modelling solid and porous wall boundary conditions in CFD codes. The method utilized experimental measurements at the walls to develop a flow field solution based on the method of singularities. This flow field solution was then imposed as a pressure boundary condition in a CFD simulation of the internal flow field. The effectiveness of this method in describing the effect of porosity changes on the wall was investigated. Also, the effectiveness of this method when only sparse experimental measurements were available has been investigated. The current work demonstrated this approach for low speed flows and compared the results with experimental data obtained from a heavily instrumented variable porosity test section. The approach developed was simple, computationally inexpensive, and did not require extensive or intrusive measurements of the boundary conditions during the wind tunnel test. It may be applied to both solid and porous wall wind tunnel tests.

Beutner, Thomas John↗

Intensity Biased PSP Measurement

The current pressure sensitive paint (PSP) technique assumes a linear relationship (Stern-Volmer Equation) between intensity ratio (I(sub o)/I) and pressure ratio (P/P(sub o)) over a wide range of pressures (vacuum to ambient or higher). Although this may be valid for some PSPs, in most PSPs the relationship is nonlinear, particularly at low pressures (less than 0.2 psia when the oxygen level is low). This non-linearity can be attributed to variations in the oxygen quenching (de-activation) rates (which otherwise is assumed constant) at these pressures. Other studies suggest that some paints also have non-linear calibrations at high pressures; because of heterogeneous (non-uniform) oxygen diffusion and quenching. Moreover, pressure sensitive paints require correction for the output intensity due to light intensity variation, paint coating variation, model dynamics, wind-off reference pressure variation, and temperature sensitivity. Therefore to minimize the measurement uncertainties due to these causes, an insitu intensity correction method was developed. A non-oxygen quenched paint (which provides a constant intensity at all pressures, called non-pressure sensitive paint, NPSP) was used for the reference intensity (I(sub NPSP) with respect to which all the PSP intensities (I) were measured. The results of this study show that in order to fully reap the benefits of this technique, a totally oxygen impermeable NPSP must be available.

Subramanian, Chelakara S.↗

An Experimental Evaluation of Generalized Predictive Control for Tiltrotor Aeroelastic Stability Augmentation in Airplane Mode of Flight

The results of a joint NASA/Army/Bell Helicopter Textron wind-tunnel test to assess the potential of Generalized Predictive Control (GPC) for actively controlling the swashplate of tiltrotor aircraft to enhance aeroelastic stability in the airplane mode of flight are presented. GPC is an adaptive time-domain predictive control method that uses a linear difference equation to describe the input-output relationship of the system and to design the controller. The test was conducted in the Langley Transonic Dynamics Tunnel using an unpowered 1/5-scale semispan aeroelastic model of the V-22 that was modified to incorporate a GPC-based multi-input multi-output control algorithm to individually control each of the three swashplate actuators. Wing responses were used for feedback. The GPC-based control system was highly effective in increasing the stability of the critical wing mode for all of the conditions tested, without measurable degradation of the damping in the other modes. The algorithm was also robust with respect to its performance in adjusting to rapid changes in both the rotor speed and the tunnel airspeed.

Kvaternik, Raymond G.↗

On the Development of Parameterized Linear Analytical Longitudinal Airship Models

In order to explore Titan, a moon of Saturn, airships must be able to traverse the atmosphere autonomously. To achieve this, an accurate model and accurate control of the vehicle must be developed so that it is understood how the airship will react to specific sets of control inputs. This paper explains how longitudinal aircraft stability derivatives can be used with airship parameters to create a linear model of the airship solely by combining geometric and aerodynamic airship data. This method does not require system identification of the vehicle. All of the required data can be derived from computational fluid dynamics and wind tunnel testing. This alternate method of developing dynamic airship models will reduce time and cost. Results are compared to other stable airship dynamic models to validate the methods. Future work will address a lateral airship model using the same methods.

aerobot↗

CFD Based Computations of Flexible Helicopter Blades for Stability Analysis

As a collaborative effort among government aerospace research laboratories an advanced version of a widely used computational fluid dynamics code, OVERFLOW, was recently released. This latest version includes additions to model flexible rotating multiple blades. In this paper, the OVERFLOW code is applied to improve the accuracy of airload computations from the linear lifting line theory that uses displacements from beam model. Data transfers required at every revolution are managed through a Unix based script that runs jobs on large super-cluster computers. Results are demonstrated for the 4-bladed UH-60A helicopter. Deviations of computed data from flight data are evaluated. Fourier analysis post-processing that is suitable for aeroelastic stability computations are performed.

Guruswamy, Guru P.↗

Refine your search to explore more results.