Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Modeling and experimental validation of direct contact crossflow packed beds condenser used in HDH desalination systems

Humidification and dehumidification (HDH) desalination systems are alternatives to reverse osmosis desalination systems, especially for high salinity waters. A HDH system is essentially equipped with a humidifier (also called as evaporator) for air to pick up vapor from saline water, a dehumidifier (also called as condenser) to produce freshwater, and a heating source. HDH systems based on direct contact packed beds heat exchangers have remarkably lower costs than traditional HDH systems due to their inexpensive materials and simple configurations. This paper specifically focuses on direct contact crossflow packed beds condensers, in which cooling water vertically drips through the packed beds, directly contacting the horizontal air-vapor flow. A two-dimensional mathematical model that solves for the enthalpy values of the working fluids is proposed in this paper, and the PDEs are solved using finite differences. To validate the model, an experimental condenser was built and tested. Water temperatures inside the test section at twenty-nine locations were measured, as well as the air vapor temperatures of five locations at the outlet. The measured water and air-vapor temperatures agree with the simulation results with less than 10 % error in most of the compared domain.

42 ENGINEERING↗

Simulated impedance of diffusion in porous media

This paper describes the use of a frequency domain, finite-difference scheme to simulate the impedance spectra of diffusion in porous microstructures. We investigate both open and closed systems for a range of ideal geometries, as well as some randomly generated synthetic volumes and tomographically derived microstructural data. In many cases, the spectra deviate significantly from the conventional Warburg-type elements typically used to represent diffusion in equivalent circuit analysis. Furthermore, a key finding is that certain microstructures show multiple peaks in the complex plane, which may be misinterpreted as separate electrochemical processes in real impedance data. This is relevant to battery electrode design as the techniques for nano-scale fabrication become more widespread. This simulation tool is provided as an open-source MatLab application and is freely available online as part of the TauFactor platform.

36 MATERIALS SCIENCE↗

Evaluating dynamic thermal performance of building envelope components using small-scale calibrated hot box tests

The hot box test method has been applied to evaluate both the steady-state (U-value) and dynamic thermal properties of building envelopes. However, the high construction cost of full-scale hot box apparatus and the testing time required (usually several days) may prevent its wider adoption. To overcome the limitations of full-scale hot box tests, here we propose a novel method to evaluate the dynamic thermal performance of building envelope components using a small-scale calibrated hot box and scaled-down specimen. In this paper, the scaling relationships of thermal properties evaluated using a full-size specimen and a scaled-down specimen are established based on the Laplace transform of the heat transfer equations. In addition, dynamic thermal properties obtained from scaled-down experimental tests are compared to the values calculated by the EN ISO13768 (ISO) method. A small-scale hot box with a 355 mm × 355 mm metering area was constructed and calibrated to validate the correlations. Three scaled-down concrete sandwich wall panels were then tested and the scaling relationship was cross-validated using the experimental results, finite difference (FD) simulations, and the ISO method. The results indicate that the dynamic thermal properties obtained from a scaled-down hot box test can be correlated to its full-size counterpart when certain conditions are met. The scaled-down hot box test is demonstrated to be an effective yet economical alternative to a full-scale test with significantly reduced experimentation cost and turn-around time.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Experimental characterization and analysis of phase change material-based thermal energy storage system for refrigerated display case

Refrigerated display cases that are used to store and exhibit food products in supermarkets and retail spaces consume a significant portion of the buildings’ total electricity. Importantly, the refrigeration-related energy cost and demand charges are greatly affected by the time-of-use electricity pricing and demand rates, which are at their maximum during peak hours, typically when refrigeration energy consumption is also high. Using energy storage to shift the refrigeration load from peak to off-peak hours can greatly reduce the operational costs in the supermarket. This study demonstrates a phase change material-based thermal energy storage (TES) system, specifically designed in stackable units, that can be integrated with an open vertical refrigerated display case. We perform numerical and experimental characterization that includes finite-difference modeling for the TES, prototype fabrication, and laboratory evaluation, followed by a preliminary system-level analysis to predict the impact of TES on the refrigerated case performance, energy use, and energy cost. The results show that the dedicated latent TES for refrigerated cases can provide a specific energy of 50.4 Wh/kg and a specific power of 15.5 W/kg. The TES can be charged during 12 h of the off-peak period and discharged at various rates during 4 to 6 h of the peak period, thereby shifting the refrigeration load from the peak to the off-peak period. Consequently, annual cost savings up to 19% can be achieved, depending on the thermal load, the summer/winter peak electricity pricing, and the transition temperature of the phase change material used.

25 ENERGY STORAGE↗

The effects of nearby fractures on hydraulically induced fracture propagation and permeability changes

Fracture propagation caused by hydraulic fracturing operations can be significantly influenced by adjacent fractures. In this paper, we present a detailed coupled hydro-mechanical analysis to study the effects of nearby natural fractures on hydraulically induced fracture propagation and changes in fracture permeability. Two rock domains were considered in comparison: FD1, with one fracture, and FD2, with two adjacent parallel or non-parallel fractures. It was assumed that water injection occurred in a borehole that intersected the single fracture in FD1 and one of the two fractures in FD2. Simulations were made for a time period of 3 h with an injection period of 2 h followed by 1 h of shut-in. An elastic-brittle model based on the degradation of material properties was implemented in a 2D finite-difference scheme and used for elements of the intact rock subjected to tension and shear failure. The intact rock was considered to have a low but non-negligible permeability. A verification study against analytical solutions showed that the fracture propagation and stress concentrations due to differential boundary stresses could be accurately represented by our model. Next, a base case was considered, in which the stress ratio (SR) between the magnitudes of the maximum and minimum boundary stresses, the permeability k R of the intact rock and the initial permeability k TF of the tension failure regions were fixed. In FD2, the distance d F between the two natural fractures defined by the closest distance was also fixed. The results showed that in both rock domains, the fracture started to propagate when the pore pressure was approximately 85% of the magnitude of the minimum boundary stress. The propagation of a single fracture was significantly greater than the propagation of a double fracture system because, in the latter case, the pore pressure decreased when the two fractures connected. As a result, changes in permeability in FD2 were smaller than in FD1. At the end of injection, the maximum ratios between the final and initial permeability of the natural fractures were found to be approximately 3 and 2 for rock domains FD1 and FD2, respectively. For non-parallel fractures, the controlling factor for fracture propagation was the separation between the tips of the pressurised fracture and the neighbouring non-pressurised fracture. A sensitivity study was conducted to study the influence of the key parameters d F , SR, k R and k TF on the simulation results. Lastly, fracture propagation showed more sensitivity to dF and SR than to the other parameters.

58 GEOSCIENCES↗

Inverse aqueous transport modeling for emergency response

ALGE is a three-dimensional, finite-difference aqueous transport model that simulates pollutant fate and transport in lakes, rivers, bays, and estuaries by solving the prognostic equations of mass, momentum, and energy. Its current modeling capabilities include transport of dissolved tracer for a series of predefined basins across the continental United States. Recently, an inverse method (also known as backtracking) has been added to ALGE to provide a possible source of a pollutant should one be detected by a sensor in a body of water and a source is not known. This inverse method is a three step process that uses an algorithm to inverse the flow. We demonstrate the new model’s capabilities through simulating the 2021 Piney Point spill in Tampa Bay, Florida (USA). This involves moving tracer backwards from its detection points, encompassing a potential source area, and applying Bayes’ Theorem and $\frac{𝜒}{𝑄}$ to reduce the area within which the true source could be located.

hydrological modeling↗

Quartz-hosted inclusions and embayments reveal storage, fluxing, and ascent of the Mesa Falls Tuff, Yellowstone

Quartz-hosted glasses from the Mesa Falls Tuff provide a geochemical window into the pre-eruptive magmatic system from one of Yellowstone's largest-volume caldera-forming eruptions. H 2 O and CO 2 concentrations, along with major and trace elements, were measured in both fully enclosed glass inclusions and partially enclosed embayments in the same quartz crystals. Major elements are largely consistent between the inclusions and embayments, except for K 2 O and Na 2 O. Of note, K 2 O is enriched by ~1 wt.% in embayment interiors relative to inclusions. Most trace elements are also enriched in the embayment interiors compared to inclusions from the same crystals. Fractionation trends of trace elements are consistent with ~30-60% crystallization. Quartz-hosted glass inclusions preserve 3.1±0.9 wt.% H 2 O and 493±227 ppm CO 2 whereas embayment interiors have 0.9±0.1 wt.% H 2 O and 399±229 ppm CO 2 . The CO 2 is roughly similar, but the distinct ~2 wt.% discrepancy between inclusion and embayment interior H 2 O contents may have been produced by CO 2 fluxing sourced from underplated Yellowstone basalts. H 2 O gradients within embayments are flat in their interiors and modified by sharp positive gradients near embayment exteriors which were produced by post-eruptive rehydration. CO 2 gradients occur as gently sloping concentration gradients that extend inward 150 to 250 μm from the embayment exterior. Finally, finite-difference 1D and 2D diffusion modeling indicates the distribution of H 2 O and CO 2 in embayments was produced by slow, fluid-saturated decompression that preceded rapid ascent during the caldera-forming eruption.

2D diffusion modeling↗

On the feasibility of using physics-informed machine learning for underground reservoir pressure management

In this work, we evaluate the feasibility of using physics-informed machine learning (PIML) for underground energy-related pressure management. To this end, we develop a PIML framework to manage underground reservoir pressures by training neural networks to determine fluid extraction rates for dedicated extraction wells during fluid injection operations given a range of reservoir conditions (e.g., transmissivity and storativity). We implement an automatically-differentiable analytical physics model of fluid flow in porous media within the PIML framework as a proxy for more complicated models. This allows us to execute a sufficient number of training scenarios to fully evaluate the feasibility of using PIML to support pressure management activities. We quantify the number of physics-model parameters required for automatic differentiation to become more efficient than finite-difference gradient calculations. We use a simple scenario with a single injector, extractor, and critical location for our feasibility analysis. We evaluate the effect of the size of the training dataset (i.e., the number of reservoir condition samples) on the accuracy and efficiency of the PIML framework. For an equivalent number of model evaluations, the larger training dataset took less time to train and produced a neural network that was able to more accurately manage reservoir pressures. We also evaluate the effect of the training dataset batch size (i.e., number of reservoir condition samples used to update the neural network coefficients during training; i.e., how the training dataset is partitioned). While training ran faster with larger batch sizes, they produced neural networks that managed pressures less accurately. We demonstrate the approach on a more complex scenario involving 10 injectors, 10 extractors, and 4 critical locations (a relatively high well density of 20 wells/km2). We provide the number of forward and adjoint model evaluations required in each case as an indication of the feasibility of using PIML for pressure management when more complicated physics models with longer execution times are used.

54 ENVIRONMENTAL SCIENCES↗

A FFT-based mesoscale continuum dislocation mechanics with defect energy: Applications to composites and polycrystals

A crystal plasticity elastoviscoplastic FFT (fast Fourier transform) formulation with a mesoscale continuum field dislocation mechanics model is presented, which incorporates a defect energy density that depends on GND densities and an associated material length scale. This allows to thermodynamically derive internal length scale dependent intra-crystalline backstress and Peach–Koehler force acting on GND densities. The model considers GND density evolution through a filtered numerical spectral approach, which is coupled with stress equilibrium through the elastoviscoplastic FFT algorithm. The discrete Fourier transform (DFT) method together with finite difference (FD) schemes is applied to solve both the backstress tensor and the Fourier–Green operator. Numerical results are first reported for two-phase laminate composites with plastic single crystal channels and elastic precipitates for shear loadings. Channel size effects are simulated and analyzed on the overall and local hardening behaviors during monotonous loadings. In addition, the evolutions of GND densities and the role of their associated backstress on size effects are examined during reversible shear loading. In a second part, the role of the defect energy internal length scale on polycrystal’s hardening during tension–compression is discussed. The results are compared to those obtained using FFT-based continuum field dislocation mechanics without defect energy.

36 MATERIALS SCIENCE↗

An embedded 3D fracture modeling approach for simulating fracture-dominated fluid flow and heat transfer in geothermal reservoirs

In this paper, we describe an efficient modeling approach, named embedded discrete fracture method (EDFM), for incorporating arbitrary 3D, discrete fractures, such as hydraulic fractures or faults, into modeling fracture-dominated fluid flow and heat transfer in fractured geothermal reservoirs. This technique allows 3D discrete fractures to be discretized independently from surrounding rock volume and inserted explicitly into a primary fracture/matrix grid, generated without including 3D discrete fractures in prior. An effective computational algorithm is developed to discretize these 3D discrete fractures and construct local connections between 3D fractures and fracture/matrix grid blocks representing the surrounding rock volume. The constructed gridding information on 3D fractures is then added to the primary grid. This embedded fracture modeling approach can be directly implemented into a developed geothermal reservoir simulator via the integral finite difference (IFD) method or with TOUGH2 technology. This embedded fracture modeling approach is very promising and computationally efficient to handle realistic 3D discrete fractures with complicated geometries, connections, and spatial distributions. Compared with other fracture modeling approaches, it avoids cumbersome 3D unstructured, local refining procedures, and increases computational efficiency by simplifying Jacobian matrix size and sparsity, while maintaining enough accuracy. Several numeral simulations are presented to demonstrate the utility and robustness of the proposed technique. Our numerical experiments show that this approach captures all the key patterns about fluid flow and heat transfer dominated by fractures in these cases. Thus, this approach is readily available to the simulation of fractured geothermal reservoirs with both artificial and natural fractures.

15 GEOTHERMAL ENERGY↗

Multicomponent Reynolds-averaged Navier-Stokes simulations of reshocked Richtmyer-Meshkov instability-induced mixing

A third-order weighted essentially nonoscillatory (WENO) finite-difference implementation of a two-equation K–ε multicomponent Reynolds-averaged Navier–Stokes (RANS) model is used to simulate reshocked Richtmyer–Meshkov turbulent mixing of air and sulfur hexafluoride at incident shock Mach numbers Ma s = 1.24, 1.50, 1.98 with Atwood number At = 0.67 and Ma s = 1.45 with At = –0.67. The predicted mixing layer width evolutions are compared with experimental measurements of the width before and after reshock [M. Vetter, B. Sturtevant, Shock Waves 4 (1995) 247; F. Poggi, M.H. Thorembey, G. Rodriguez, Phys. Fluids 10 (1998) 2698] and with the analytical self-similar power-law solution of the simplified model equations before reshock. A new procedure is introduced for the specification of the initial turbulent kinetic energy and its dissipation rate, in which these quantities are related by the linear instability growth rate. The predicted mixing layer widths before reshock are shown to be sensitive to changes in the initial turbulent kinetic energy and its dissipation rate, while the widths after reshock are sensitive to changes in the model coefficients C ε0 and σ ρ appearing in the buoyancy (shock) production terms in the turbulent kinetic energy and dissipation rate equations. Here, a set of model coefficients and initial conditions is shown to predict mixing layer widths in generally good agreement with the pre-reshock experimental data, and very good agreement with the post-reshock data for all cases. Budgets of the turbulent kinetic energy equation just before and after reshock for the Ma s = 1.24 case are used to identify the principal physical mechanisms generating turbulence in reshocked Richtmyer–Meshkov instability: buoyancy production (pressure work) and shear production. Numerical convergence of the mixing layer widths under spatial grid refinement is also demonstrated for each of the Mach numbers considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigating relationship between surface topography and emissivity of metallic additively manufactured parts

Due to the direct relationship between thermal history and mechanical behavior, in situ thermal monitoring is key in gauging quality of parts produced with additive manufacturing (AM). Accurate monitoring of temperatures in an AM process requires knowledge of environment and object parameters including object emissivity. The emissivity is dependent on several variables, including: wavelength, material composition, temperature, and surface topography. Researchers have been concerned with the thermal emissivity dependence on temperature since large ranges are seen in metal powder bed processes, but there is also an extensive range of surfaces produced by AM. This work focused on discovering what roughness characteristics control thermal emissivity through investigation of prototypic 316 stainless steel AM samples produced with a range of build conditions on a laser powder bed fusion machine. Through experimental measurements of emissivity using hemispherical directional reflectance (HDR), guided by simulations using a finite-difference time-domain (FDTD) Maxwell solver, it was found that combinations of existing roughness parameters describing both height and slope of the surface correlate well with emissivity changes. Furthermore, these parameters work well due to their apt description of surface features encouraging internal reflection, which is the phenomenon that increases emissivity when a surface falls under the geometric optical region conditions.

36 MATERIALS SCIENCE↗

Discrete Green’s functions and spectral graph theory for computationally efficient thermal modeling

Here, this work concerns solutions of the heat equation with the spectral graph method, for which the temperature is defined at discrete points in the domain and the spatial relationship among the points is described by a graph. The heat equation on the graph is solved using matrix techniques involving the eigenvectors and eigenvalues of the Laplacian matrix. The spectral graph approach precludes the computationally intensive meshing and numerous time-integration steps of the finite element method. In the present work, the spectral graph method is extended to include heat loss at the boundaries with a generalized boundary condition, and physics-based edge weights are introduced which simplify the calibration process. From this approach a discrete Green’s function is defined which allows for solutions under a variety of heating conditions including: space-varying initial conditions; time-and-space varying internal heating; and, time-and-space-varying heating at boundaries of type 1 (Dirichlet), type 2 (Neumann) and type 3 (Robin). Results are provided for benchmark heat transfer problems in one spatial dimension and in three spatial dimensions, and verification is provided by comparison with exact analytical solutions and finite difference solutions. The spectral graph method converges within 0.4% error of the analytical solution. The practical utility of the approach is demonstrated by thermal simulation of a multilayer additive manufacturing process. The spectral graph results are compared to experimentally-obtained temperature data for two metal parts, with error less than 5% of the experimental measurements, with computation time less than one minute on a desktop computer.

36 MATERIALS SCIENCE↗

A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy

We present a new smoothed particle hydrodynamics (SPH) model for friction stir welding (FSW). FSW has broad commercial application in the marine, aerospace, rail, and automotive industries. However, development of the FSW process for each new application has remained largely empirical. Few established numerical modeling techniques have been developed that can explain and predict important features of the process physics involved in FSW. This is particularly true in the areas of material flow and mixing mechanisms. In this paper, we present a novel modeling approach to simulate FSW that may have significant advantages over current finite element or finite difference based methods. Unlike traditional grid-based methods, Lagrangian particle methods such as SPH can simulate the dynamics of interfaces, large material deformations, and the material’s strain and temperature history without employing complex tracking schemes. Three-dimensional simulations of FSW on AZ31 Mg alloy are performed. The temperature history and distribution, grain size, microhardness as well as the texture evolution are presented. Numerical results are found to be in good agreement with experimental observations.

Pan, Wenxiao↗

Online Adaptive Hyperthermia Treatment Planning During Locoregional Heating to Suppress Treatment-Limiting Hot Spots

Background: Adequate tumor temperatures during hyperthermia are essential for good clinical response, but excessive heating of normal tissue should be avoided. This makes locoregional heating using phased array systems technically challenging. Online application of hyperthermia treatment planning could help to improve the heating quality. The aim of this study was to evaluate the clinical benefit of online treatment planning during treatment of pelvic tumors heated with the AMC-8 locoregional hyperthermia system. Methods: For online adaptive hyperthermia treatment planning, a graphical user interface was developed. Electric fields were calculated in a preprocessing step using our in-house–developed finite-difference–based treatment planning system. This allows instant calculation of the temperature distribution for user-selected phase-amplitude settings during treatment and projection onto the patient's computed tomographic scan for online visualization. Online treatment planning was used for 14 treatment sessions in 8 patients to reduce the patients' reports of hot spots while maintaining the same level of tumor heating. The predicted decrease in hot spot temperature should be at least 0.5°C, and the tumor temperature should decrease less than 0.2°C. These predictions were compared with clinical data: patient feedback about the hot spot and temperature measurements in the tumor region. Results: In total, 17 hot spot reports occurred during the 14 sessions, and the alternative settings predicted the hot spot temperature to decrease by at least 0.5°C, which was confirmed by the disappearance of all 17 hot spot reports. At the same time, the average tumor temperature was predicted to change on average −0.01°C (range, −0.19°C to 0.34°C). The measured tumor temperature change was on average only −0.02°C (range, −0.26°C to 0.31°C). In only 2 cases the temperature decrease was slightly larger than 0.2°C, but at most it was 0.26°C. Conclusions: Online application of hyperthermia treatment planning is reliable and very useful to reduce hot spots without affecting tumor temperatures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A FFT-based numerical implementation of mesoscale field dislocation mechanics: Application to two-phase laminates

In this study, we present an enhanced crystal plasticity elasto-viscoplastic fast Fourier transform (EVPFFT) formulation coupled with a phenomenological Mesoscale Field Dislocation Mechanics (MFDM) theory here named MFDM-EVPFFT formulation. In contrast with classic CP-EVPFFT, the model is able to tackle plastic flow and hardening due to polar dislocation density distributions or geometrically necessary dislocations (GNDs) in addition to statistically stored dislocations (SSDs). The model also considers GND mobility through a GND density evolution law numerically solved with a recently developed filtered spectral approach, which is here coupled with stress equilibrium. The discrete Fourier transform method combined with finite differences is applied to solve both lattice incompatibility and Lippmann-Schwinger equations in an augmented Lagrangian numerical scheme. Numerical results are presented for two-phase laminate composites with plastic channels and elastic second phase. It is shown that both GND densities and slip constraint at phase boundaries influence the overall and local hardening behavior. In contrast with the CP-EVPFFT formulation, a channel size effect is predicted on the shear flow stress with the present MFDM-EVPFFT formulation. The size effect originates from the progressive formation of continuous screw GND pile-ups from phase boundaries to the channel center. The effect of GND mean free path on local and global responses is also examined for the two-phase composite.

36 MATERIALS SCIENCE↗

Pore Scale Modeling of Competitive Adsorption of a Plume in a Porous Medium

In this paper we present a smoothed particle hydrodynamics (SPH) pore scale reactive transport model of competitive adsorption of a binary system in a porous media. SPH is a Lagrangian, particle based modeling method which uses the particles as interpolation points to directly discretize the governing equations of the system. The theory and details of the SPH pore scale model are presented along with a novel method for handling surface reactions based on the continuum surface force model [1]. The numerical accuracy of the model is validated with analytical and finite difference solutions, and the effects of spatial and temporal resolution on the accuracy of the model are also discussed. The pore scale model is used to study competitive adsorption for different Damköhler and Peclet numbers in a binary system where a plume of species B is introduced into a system which initially contains species A. The pore scale model results are compared with a Darcy scale model to investigate the accuracy of a Darcy scale reactive transport model for a wide range of Damköhler and Peclet numbers. The results demonstrate that the Darcy model is able to accurately predict the total mass of aqueous and adsorbed species of both species A and B for low Damköhler numbers. For high Damköhler numbers the Darcy model is able to accurately model the aqueous and absorbed mass of species A, but is unable to accurately predict the total mass of aqueous and adsorbed species B, which moves through the domain as a plume. At high Peclet numbers, the Darcy model was able to accurately predict the aqueous and adsorbed masses of species A and B at higher Damköhler numbers then low Peclet number simulations, however at both high and low Peclet numbers the Darcy model was not able to accurately predict the total mass of species B at high Damköhler numbers. The simulation results demonstrate the limitations of simple Darcy scale models with constant transport coefficients.

54 ENVIRONMENTAL SCIENCES↗

Modeling coupled sorption and transformation of 17β-estradiol–17-sulfate in soil–water systems

Animal manure is the primary source of exogenous free estrogens in the environment, which are known endocrine-disrupting chemicals to disorder the reproduction system of organisms. Conjugated estrogens can act as precursors to free estrogens, which may increase the total estrogenicity in the environment. In this study, a comprehensive model was used to simultaneously simulate the coupled sorption and transformation of a sulfate estrogen conjugate, 17 beta-estradiol-17-sulfate (E2-17S), in various soil-water systems (non-sterile/sterile; topsoil/subsoil). The simulated processes included multiple transformation pathways (i.e. hydroxylation, hydrolysis, and oxidation) and mass transfer between the aqueous, reversibly sorbed, and irreversibly sorbed phases of all soils for E2-17S and its metabolites. The conceptual model was conceived based on a series of linear sorption and first-order transformation expressions. The model was inversely solved Using finite difference to estimate process parameters. A global optimization method was applied for the inverse analysis along with variable model restrictions to estimate 36 parameters. The model provided a satisfactory simultaneous fit (R-adj(2) = 0.93 and d = 0.87) of all the experimental data and reliable parameter estimates. This modeling study improved the understanding on fate and transport of estrogen conjugates under various soil-water conditions.

17β-Estradiol–17-sulfate↗

Refine your search to explore more results.