Search NASA⌕ Search

SEARCH · Search NASA

Results for “CVD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Development and evaluation of die materials for use in the growth of silicon ribbons by the inverted ribbon growth process, task 2. LSSA project

The results of emission spectroscopic analysis indicate that molten silicon can remain in contact with hot-pressed Si3N4 (99.2 percent theoretical density) for prolonged periods without attaining the impurity content level of the nitride. Although MgO was used as binder, Mg was not found present in the silicon sessile drop in quantities much above the level initially present in the silicon source material. Preliminary experiments with EFG-type dies coated with CVD Si3N4 or CVD SiOxNy indicate that capillary rise does not occur readily in these dies. The same was found to be true of hot-pressed and reaction-sintered Si3N4 obtained commercially. However, when dies were formed by depositing CVD layers on shaped silicon slabs, a column of molten silicon was maintained in each CVD die while being heated in contact with a crucible of molten silicon. Preliminary wetting of dies appears necessary for EFG growth. Several ribbon growth experiments were performed from V-shaped dies.

Duffy, M. T.↗

Automatic chemical vapor deposition

Report reviews chemical vapor deposition (CVD) for processing integrated circuits and describes fully automatic machine for CVD. CVD proceeds at relatively low temperature, allows wide choice of film compositions (including graded or abruptly changing compositions), and deposits uniform films of controllable thickness at fairly high growth rate. Report gives overview of hardware, reactants, and temperature ranges used with CVD machine.

Kennedy, B. W.↗

High efficiency thin-film GaAs solar cells

The paper demonstrates the feasibility of producing high-efficiency GaAs solar cells with high power-to-weight ratios by organic metallic chemical vapor deposition (OM-CVD) growth of thin epi-layers on suitable substrates. An AM1 conversion efficiency of 18% (14% AM0), or 17% (13% AM0) with a 5% grid coverage is achieved for a single-crystal GaAs n(+)/p cell grown by OM-CVD on a Ge wafer. Thin GaAs epi-layers OM-CVD grown can be fabricated with good crystallographic quality using a Si-substrate on which a thin Ge epi-interlayer is first deposited by CVD from GeH4 and processed for improved surface morphology

Zwerdling, S.↗

Rapid fabrication of lightweight ceramic mirrors via chemical vapor deposition

Lightweight Si/SiC mirrors of nominal diameter 7.5 cm have been fabricated via a scalable and rapid CVD process to demonstrate the CVD mirror fabrication technology. These mirrors consist of a faceplate of either Si or Si-coated SiC and a lightweight backstructure made of either Si or SiC. The mirrors were polished to a figure better than 1/5th of a wave at 0.6328 A and a finish of better than 10 A rms. A procedure for fabricating these mirrors is described. The CVD fabrication process is fast and has the potential to yield several mirrors in a few weeks time from a single reactor. The CVD mirror fabrication technology is quite general and can be extended to include mirrors of other ceramic materials such as TiB2 and B4C.

Goela, Jitendra S.↗

Numerical modeling tools for chemical vapor deposition

Development of general numerical simulation tools for chemical vapor deposition (CVD) was the objective of this study. Physical models of important CVD phenomena were developed and implemented into the commercial computational fluid dynamics software FLUENT. The resulting software can address general geometries as well as the most important phenomena occurring with CVD reactors: fluid flow patterns, temperature and chemical species distribution, gas phase and surface deposition. The physical models are documented which are available and examples are provided of CVD simulation capabilities.

Jasinski, Thomas J.↗

Flow field velocity measurements for non-isothermal systems

Experimental techniques which can be potentially utilized to measure the gas velocity fields in nonisothermal CVD systems both in ground-based and space-based investigations are considered. The advantages and disadvantages of a three-component laser velocimetry (LV) system that was adapted specifically for quantitative determination of the mixed convective flows in a chamber for crystal growth and film formation by CVD are discussed. Data from a horizontal research CVD reactor indicate that current models for the effects of thermophoretic force are not adequate to predict the thermophoretic bias in arbitrary flow configurations. It is concluded that LV techniques are capable of characterizing the fluid dynamics of a CVD reactor at typical growth temperatures. Thermal effects are shown to dominate and stabilize the fluid dynamics of the reactor. Heating of the susceptor increases the gas velocities parallel to the face of a slanted susceptor by up to a factor of five.

Johnson, E. J.↗

Applications of diamond films and related materials; Proceedings of the 1st International Conference, Auburn, AL, Aug. 17-22, 1991

The present conference discusses the nucleation and growth of diamond from hydrocarbons, the cutting tool performance of CVD thick-film diamond, the characterization of CVD diamond grinding powder, industrial applications of crystalline diamond-coated tools, standardized SEM tribometry of diamond-coated substrates, residual stress in CVD diamond films, the optical properties of CVD diamond films, polycrystalline diamond films for optical applications, and diamond growth on ferrous metals. Also discussed are ion beam-irradiation smoothing of diamond films, electronic circuits on diamond substrates, diamond-laminated surfaces for evaporative spray cooling, electron devices based on the unique properties of diamond, diamond cold cathodes, thin-film diamond microstructure applications, Schottky diodes from flame-grown diamond, diamond films for thermionic applications, methods of diamond nucleation and selective deposition, high-rate/large-area diamond film production, halogen-assisted diamond growth, the economics of diamond technology, and the optical and mechanical properties of diamondlike films.

Tzeng, Yonhua↗

Rhenium material properties

Tensile data were obtained from four different types of rhenium at ambient and elevated temperatures. The four types of rhenium included chemical vapor deposition (CVD) and three powder metallurgy (PM) types, i.e., rolled sheet and pressed and sintered bars, with and without hot isostatic pressure (HIP) treatment. Results revealed a wide range of values with ultimate strengths at ambient temperatures varying from 663 MPa for CVD rhenium to 943 MPa for rolled sheet. A similar spread was also obtained for material tested at 1088 K and 1644 K. The wide variance observed with the different materials indicated that the rhenium manufacturing process, material composition and prior handling strongly dictated its properties. In addition to tensile properties, CVD, pressed and sintered material and HIP rhenium successfully completed 100 cycles of low cycle fatigue. Creep data were also obtained showing that CVD and pressed and sintered rhenium could sustain five hours of testing under a tension of 27.5 MPa at 1922 K.

Biaglow, James A.↗

Chemical-Vapor-Deposited Diamond Film

This chapter describes the nature of clean and contaminated diamond surfaces, Chemical-vapor-deposited (CVD) diamond film deposition technology, analytical techniques and the results of research on CVD diamond films, and the general properties of CVD diamond films. Further, it describes the friction and wear properties of CVD diamond films in the atmosphere, in a controlled nitrogen environment, and in an ultra-high-vacuum environment.

Miyoshi, Kazuhisa↗

It's Time for Color Vision Deficiency Friendly Color Maps in the Radar Community

Color Vision Deficiency (CVD) is a decreased ability to discern between particular colors. 8% of men and 0.4% of women have some form of CVD. An informal poll of AGU and AMS twitter followers yielded 10% of 70 respondents self identifying as having CVD. When presenting data on a two-dimensional plane it is common to use colors to represent values, the mapping between values and colors is known as a colormap. Colormap choice is personal and is influenced by: (1) Ability to highlight scientifically interesting data. (2) Institutional choices (supervisor insists on a certain colormap). (3) Domain dominance of a particular colormap (common in the radar community). Colormap choice should be influenced by: (1) Ability to highlight scientifically interesting data. (2) Perceptual uniformity (thus not creating artificial structure). (3) Approachability by those with visual impairments (CVD). (4) Ideally, but not always achievable, reproducibility in greyscale.

Colormap↗

ACIX-Aqua: A Global Assessment of Atmospheric Correction Methods for Landsat-8 and Sentinel-2 Over Lakes, Rivers, and Coastal Waters

Atmospheric correction over inland and coastal waters is one of the major remaining challenges in aquatic remote sensing, often hindering the quantitative retrieval of biogeochemical variables and analysis of their spatial and temporal variability within aquatic environments. The Atmospheric Correction Intercomparison Exercise (ACIX-Aqua), a joint NASA – ESA activity, was initiated to enable a thorough evaluation of eight state-of-the-art atmospheric correction (AC) processors available for Landsat-8 and Sentinel-2 data processing. Over 1000 radiometric matchups from both freshwaters (rivers, lakes, reservoirs) and coastal waters were utilized to examine the quality of derived aquatic reflectances (ρ̂w). This dataset originated from two sources: Data gathered from the international scientific community (henceforth called Community Validation Database, CVD), which captured predominantly inland water observations, and the Ocean Color component of AERONET measurements (AERONET-OC), representing primarily coastal ocean environments. This volume of data permitted the evaluation of the AC processors individually (using all the matchups) and comparatively (across seven different Optical Water Types, OWTs) using common matchups. We found that the performance of the AC processors differed for CVD and AERONET-OC matchups, likely reflecting inherent variability in aquatic and atmospheric properties between the two datasets. For the former, the median errors in ρ̂w560 and ρ̂w664 were found to range from 20 to 30% for best-performing processors. Using the AERONET-OC matchups, our performance assessments showed that median errors within the 15–30% range in these spectral bands may be achieved. The largest uncertainties were associated with the blue bands (25 to 60%) for best-performing processors considering both CVD and AERONET-OC assessments. We further assessed uncertainty propagation to the downstream products such as near-surface concentration of chlorophyll-a (Chla) and Total Suspended Solids (TSS). Using satellite matchups from the CVD along with in situ Chla and TSS, we found that 20–30% uncertainties in ρ̂w490≤λ≤743nm yielded 25–70% uncertainties in derived Chla and TSS products for top-performing AC processors. We summarize our results using performance matrices guiding the satellite user community through the OWT-specific relative performance of AC processors. Our analysis stresses the need for better representation of aerosols, particularly absorbing ones, and improvements in corrections for sky- (or sun-) glint and adjacency effects, in order to achieve higher quality downstream products in freshwater and coastal ecosystems.

Nima Pahlevan↗

Microstructural Observations on Advanced Multilayer Protective Coatings for Nuclear Thermal Propulsion

The present research discusses the microstructures of a new multilayered coating concept proposed to solve the “midrange corrosion” problem observed in NbC and ZrC-coated graphite (Gr) nuclear fuels during the NERVA/Rover programs. The concept envisions designing a compliant multilayered coatings architecture to accommodate the thermal expansion mismatch strains between the ZrC outer coating and the Gr/(U,Zr)C fuel matrix along with using a diffusion barrier to minimize carbon and hydrogen diffusion, respectively. Multilayered coatings were deposited on Gr substrates by chemical vapor deposition (CVD). Graphite disks, as well as the inner channels of a 19-hole hexagonal rod 152.4 mm long, were coated by CVD in proof-of concept process demonstration studies. Coated disk specimens were thermally-cycled between ambient and 1900 K for as long as 20 cycles with a 1h hold time at the temperature using both stepped and non-interrupted thermal cycling methods. Detailed cross-sectional microstructural analyses were conducted on the thermally-cycled coated disks. These results showed that the coatings were intact after 20 thermal cycles at 1900 K although the bonding of the overlay Mo coating appeared to be influenced by the oxygen content in the layer. Seven transverse sections were cut along the length from the coated hexagonal rod for microstructural studies. All the nineteen channels were observed to have been coated in all the sections. This paper reports the results of detailed microstructural analyses, compositional line scans and x-ray dot maps conducted on three coated channels from a mid-section of the rod. The measured values of carbon (C) were observed to be exceptionally high in all the specimens, which were attributed to hydrocarbon contamination of the specimen surfaces. It was observed that the oxygen (O) levels were high in all the coating layers even after approximately correcting for the observed high values of C. The source of O contamination of the CVD reactor system was attributed to either the presence of oxychloride impurities in the precursor salts or a pin hole leak in the coating system. It is concluded that high values of O result in poor bonding of the Mo overlay to the ZrC layer. These trials have established that it is possible to deposit multilayered coatings by CVD in 19-hole hexagonal rods 152.4 mm long similar to the NERVA fuel rod design although the quality of the coatings and the uniformity of their thicknesses require further improvement.

Nuclear thermal propulsion, multilayer coatings, m↗

Outcomes of a NASA Human Research Program’s (HRP) Space Radiation Element-sponsored Mini-Technical Interchange Meeting/workshop on Cardiovascular Disease Risk from Space Radiation

The NASA HRP’s Space Radiation Element funds research to characterize and mitigate adverse health outcomes from space radiation including cardiovascular risks to astronauts to enable deep space exploration and sustained human presence in space. Non-cancer effects such as damage to the cardiovascular system have been observed at clinically relevant high doses of ionizing radiation. However, an association between lower doses and risk of cardiovascular disease (CVD) remains somewhat controversial, especially in relation to the existence of low dose thresholds, radiation quality, and dose-rate effects, as well as gaps in characterizing the mechanisms and major pathways of disease. To facilitate, accelerate, and incubate new ideas to characterize and mitigate this risk, the Element is planning to organize a series of miniature technical interchange meetings (Tiny-TIMs) to provide a venue for HRP-funded investigators and thought leaders to present ongoing work and engage in open discussion on presented results, limitations of current approaches, incorporating better experimental strategies, model systems, etc. The initial Tiny-TIM held during the NASA HRP Investigators’ Workshop earlier this year – Upping the ante on characterizing and mitigating cardiovascular disease risk from space radiation exposure – aimed to stimulate discussion on the current state of scientific knowledge of CVD risk from space-like radiation exposure. The Tiny-TIM consisted of two 90-minute sessions; the first session concentrated on current knowledge of CVD risk from space radiation and the second session focused on innovative ideas, newer approaches, and techniques to accelerate research. The second session was followed by an open spirited discussion amongst peers on the current issues impeding the characterization of CVD risk from space radiation. The Element facilitated the discussion using a set of pressing open questions/gaps in knowledge that need to be addressed by the scientific community. The outcomes of the Tiny-TIM will be presented along with a plan of proposed future workshops and other initiatives of the Space Radiation Element.

Janapriya Saha↗

Cardiovascular Disease Spaceflight Equivalent Stressor Risk Modeling Project

The risk of cardiovascular disease (CVD) may be exacerbated by spaceflight hazards including radiation, isolation, distance from the Earth, gravity fields, and closed or confined environments. This project aims to use epidemiologic, scientific research evidence of surrogate spaceflight stressors on analog populations in terrestrial cohorts to model CVD risk for spaceflight conditions. To date, Dr. Butler and the multi-disciplinary CVD Spaceflight Equivalent Stressors (SES) team have conducted a formal systematic literature review on the risk of sleep loss as it relates to cardiovascular disease outcomes and are currently working on a meta-analysis for the data gathered from nearly 100 studies and their various CVD outcomes. The research will continue to examine other surrogate stressors in depth, such as altered gravity, radiation exposure, noise, etc. with cardiovascular outcomes to determine an overall combined spaceflight risk for long term future missions such as Artemis Lunar and Mars missions.

Jennifer Butler↗

Evaluation of the Spaceflight Cardiovascular Disease Risk using the Clinical Prediction Model Astro-Charm and the NASA Radiation Risk Model

Exposure to space radiation and other spaceflight hazards may pose an increased risk for cardiovascular diseases (CVD) during and after spaceflight [1], that should be quantified to plan future long-duration space missions such as the flight to Mars. The first CVD clinical prediction models (CPMs) for individuals were developed by the Framingham Heart Study investigators in the 1960’s. Since then, many CPMs have been developed and refined. The CPMs consider cardiovascular risk factors such as blood pressure, diabetes, cholesterol, and smoking. As there is a relationship between radiation-induced CVD risk and the background (non-exposed) CVD risk, it is possible to use CPMs to calculate a personalized risk for astronauts.

I. Plante↗

Outcomes of a Mini Technical Interchange Meeting Concerning the Risk of Cardiovascular Disease from Exposure to Space Radiation

The NASA Human Research Program’s (HRP) Space Radiation Element (SRE) funds research to characterize and mitigate adverse health outcomes from exposure to space radiation to enable deep space exploration and sustained human presence in space. Damage to the cardiovascular system has been observed after exposure to clinically relevant doses of ionizing radiation. However, an association between lower radiation doses and cardiovascular disease (CVD) remains controversial, and questions pertaining to dose thresholds, radiation quality and dose-rate effects, and gaps in characterizing the mechanisms and major pathways of CVD remain. To solicit new ideas for characterizing and mitigating this risk, the SRE is organizing a series of miniature technical interchange meeting (Tiny-TIM) that provide a venue for HRP-funded investigators and thought leaders to present ongoing work and engage in open discussion on relevant topics. The initial Tiny-TIM: Upping the Ante on Characterizing and Mitigating Cardiovascular Disease Risk from Space Radiation Exposure, held at the NASA HRP Investigators’ Workshop (IWS) earlier this year, consisted of two 90-minute sessions; the first focused on current knowledge of CVD risk from space radiation exposure, and the second focused on innovative ideas, and newer approaches and techniques to accelerate research. The second session was followed by an open, spirited discussion amongst peers on the current issues impeding the characterization of CVD risk. SRE leadership facilitated the discussion using a set of pressing questions and gaps in knowledge that need to be addressed by the scientific community. This poster presents the outcomes of the Tiny-TIM, along with proposed future workshops and the SRE’s other initiatives.

Janapriya Saha↗

Conclusions of a Mini Technical Interchange Meeting on Mechanisms and Pathways Common Between Adverse Health Outcomes from Exposures to Space Radiation

To enable deep space exploration and sustained human presence in space, the NASA Human Research Program’s (HRP) Space Radiation Element (SRE) funds research to characterize and mitigate adverse health outcomes from exposure to space radiation that include risks of carcinogenesis, cardiovascular disease (CVD) and central nervous system (CNS) decrements. Over the past decade, a growing body of compelling experimental evidence suggests shared mechanisms and pathophysiological processes for CVD, neurodegenerative effects, and cancer development and progression, which are traditionally managed as separate disease processes. Additionally, epidemiological studies have identified cross-sectional and longitudinal associations between some specific types of cancer and CVD, and accumulating evidence indicates that the pathogenesis of neurodegenerative diseases such as Alzheimer’s disease may overlap with CVD and cancer pathogenesis. Identifying the mechanisms and pathways common to these important health decrements will not only accelerate development of effective countermeasures and improve management of spaceflight-induced risk, it will also help to develop new treatment strategies for patients on Earth. To identify common pathways and mechanisms of disease induction and progression from current SR-funded studies and to inform future work and solicitations, the SRE organizes themed sessions at annual HRP Investigators’ Workshops (IWS). These technical interchange meetings (TIMs) provide a venue for the scientific community to present ongoing work and engage in open discussion on results, limitations of current approaches, and incorporation of novel experimental strategies, model systems, and other innovative techniques. Here a summary and lessons learned from the SRE-sponsored mini-TIM titled “mechanisms and pathways common between adverse health outcomes” held at HRP IWS 2023 will be communicated. The 90-min TIM had 30-min dedicated to discussing and developing potential collaboration and tissue sharing opportunities among investigators. The SRE facilitated the discussion using a set of pressing questions and gaps in knowledge that need to be addressed by the scientific community. This poster presents the outcomes of the session along with proposed future workshops and other SRE initiatives.

Janapriya Saha↗

Conclusions of a Mini Technical Interchange Meeting on Mechanisms and Pathways Common Between Adverse Health Outcomes from Exposures to Space Radiation

To enable deep space exploration and sustained human presence in space, the NASA Human Research Program’s (HRP) Space Radiation Element (SRE) funds research to characterize and mitigate adverse health outcomes from exposure to space radiation that include risks of carcinogenesis, cardiovascular disease (CVD) and central nervous system (CNS) decrements. Over the past decade, a growing body of compelling experimental evidence suggests shared mechanisms and pathophysiological processes for CVD, neurodegenerative effects, and cancer development and progression, which are traditionally managed as separate disease processes. Additionally, epidemiological studies have identified cross-sectional and longitudinal associations between some specific types of cancer and CVD, and accumulating evidence indicates that the pathogenesis of neurodegenerative diseases such as Alzheimer’s disease may overlap with CVD and cancer pathogenesis. Identifying the mechanisms and pathways common to these important health decrements will not only accelerate development of effective countermeasures and improve management of spaceflight-induced risk, it will also help to develop new treatment strategies for patients on Earth. To identify common pathways and mechanisms of disease induction and progression from current SR-funded studies and to inform future work and solicitations, the SRE organizes themed sessions at annual HRP Investigators’ Workshops (IWS). These technical interchange meetings (TIMs) provide a venue for the scientific community to present ongoing work and engage in open discussion on results, limitations of current approaches, and incorporation of novel experimental strategies, model systems, and other innovative techniques. Here a summary and lessons learned from the SRE-sponsored mini-TIM titled “mechanisms and pathways common between adverse health outcomes” held at HRP IWS 2023 will be communicated. The 90-min TIM had 30-min dedicated to discussing and developing potential collaboration and tissue sharing opportunities among investigators. The SRE facilitated the discussion using a set of pressing questions and gaps in knowledge that need to be addressed by the scientific community. This poster presents the outcomes of the session along with proposed future workshops and other SRE initiatives.

Janapriya Saha↗