Search NASA⌕ Search

SEARCH · Search NASA

Results for “GLIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1933

The Effect of Split Trailing-edge Wing Flaps on the Aerodynamic Characteristics of a Parasol Monoplane

This paper presents the results of tests conducted in the N.A.C.A. full-scale wind tunnel on a Fairchild F-22 airplane equipped with a special wing having split trailing-edge flaps. The flaps extended over the outer 90 percent of the wing span, and were of the fixed-hinge type having a width equal to 20 percent of the wing chord. The results show that with a flap setting of 59 degrees the maximum lift of the wing was increased 42 percent, and that the flaps increased the range of available gliding angles from 2.7 degrees to 7.0 degrees. Deflection of the split flaps did not increase the stalling angle or seriously affect the longitudinal balance of the airplane. With flaps down the landing speed of the airplane is decreased, but the calculated climb and level-flight performance is inferior to that with the normal wing. Calculations indicate that the take-off distance required to clear an obstacle 100 feet high is not affected by flap settings from 0 degrees to 20 degrees but is greatly increased by larger flap angles.

TAKE-OFF & LANDING - EFFECT OF WING FLAPS↗
NASA NTRS2005

Aerodynamics of trans-atmopsheric vehicles : a non-dimensional approach

The non-dimensional approach to aerodynamics of trans-atmospheric flight is discussed, which explicitly takes into account the vertical span of the atmosphere as well as atmospheric mass load (atmospheric pressure) at the current flight level. As an example, a simple analytic model of the dynamics of trans-atmospheric flight is considered for both powered boost and non-powered glide of a trans-atmospheric vehicle, and the applicability to more general, numerical models of atmospheric flight is discussed.

powered boost↗
DOE OSTI2025

High‐Concentration Antibody Formulation via Solvent‐Based Dehydration

Abstract Although subcutaneous (SC) delivery is the preferred administration route for immunotherapies and other biologics for improved patient compliance and lower healthcare costs, it necessitates high‐concentration antibody formulations. However, high‐concentration antibody solutions face significant instabilities and prohibitively high viscosities. Other approaches for high‐concentration formulations have been developed, including non‐aqueous solutions, which can be irritating or painful, and antibody‐laden hydrogel microparticles, which require centrifugation and are limited to concentrations <300 mg mL −1 . This work presents a new formulation process wherein the antibody is concentrated and encapsulated into hydrogel microparticles via solvent‐based dehydration. The final dosage form is an aqueous particle suspension with a formulation concentration of 360 mg mL −1 . In this process, microparticles are synthesized continuously, and antibody precipitation is realized simultaneously to dehydration, which allows for higher antibody concentrations. Antibody phase behavior and precipitation–dehydration kinetics are analyzed. The antibody is structurally and functionally stable in the microparticle post‐processing and after 4 months. Injectability of the suspension meets clinical standards with glide force <20 N. For the first time, an aqueous antibody formulation at high concentrations comparable to non‐aqueous formulations is presented, ideal for subcutaneous administration. The process is envisioned to be generalizable as a platform for SC delivery in multiple clinical applications.

Zheng, Talia [Department of Chemical Engineering M↗
DOE OSTI2026

Accelerated creep profiling: a high-throughput thermal- and stress-gradient approach applied to additive and wrought stainless steel

Here, this study investigates logarithmic creep behavior at temperatures near room temperature in wrought and additively manufactured (AM) 316 L austenitic stainless steel. A novel high-throughput (HiTp) methodology employed thermal gradients to obtain stress- and temperature-dependence of creep behavior. The findings, based on 104 two-week creep tests, reveal significant differences in creep response between wrought and AM materials. Compared to the wrought material, the AM material exhibited a higher activation energy and a lower activation volume. These differences were attributed to the materials’ distinct microstructural features, e.g., dislocation cell structures and precipitate distributions, which alter the susceptibility to dislocation glide creep, particularly at stresses below the yield stress. The HiTp methodology provides both an accelerated determination of low-temperature creep mechanisms, offering critical data for the design and optimization of alloys in near-ambient, high stress applications.

316 L Stainless steel↗
DOE OSTI2024

Evaluation and development of flow condensation correlations using the data from low GWP refrigerants in an axial micro-fin aluminum tube

To mitigate global warming, the world is transitioning to refrigerants with low global warming potential (GWP). Supporting this shift requires a model that can accurately predict the heat transfer and pressure drop of new refrigerants, crucial for designing efficient heat exchangers. Existing models, however, are largely based on currently deployed refrigerants and primarily developed for unexpanded micro-fin tubes with spiral angles of 6° to 30°. Their applicability to new refrigerants, especially in expanded micro-fin tubes, is uncertain. This study assesses the performance of four well-known condensation models for six emerging refrigerants—R-32, R-454B, R-454C, R-455A, R-1234yf, and R-1234ze(E)—against experimental data. Initially, the Han and Lee (2005) model shows the best prediction accuracy with a mean absolute deviation (MAD) of 22.1 %. To enhance the accuracy of heat transfer models for new refrigerants and geometries with large temperature glides, two approaches are proposed. Here, the first approach applies a simple correction factor, reducing the MAD of the Cavallini et al. (2009) model from 68.2 % to 15.4 %. The second approach uses the variable metric method for minimization, fitting new constants to the data. This optimization results in the Kedzierski and Goncalves (1997) model achieving the highest accuracy, with a MAD of 13.1 %. For pressure drop models, the Cavallini et al. (1997) model is the most accurate with a MAD of 6.4 %, followed by the Haraguchi et al. (1993) model with a MAD of 9.4 %. Due to its simplicity, the Haraguchi et al. (1993) model is a practical option for predicting frictional pressure drop.

Axial micro-fin tubes↗
DOE OSTI2024

A prediction model of failure threshold for shear deformation in a Zr-based bulk metallic glass

The failure of bulk metallic glasses (BMGs) during plastic deformation at room temperature is abrupt and instantaneous, while the analysis of precursor information based on avalanche events helps predict catastrophic failure. An acoustic emission (AE) signal can provide accurate precursor information for material failure, due to its sensitive and high fast calculation ability. In the current study, AE monitoring tests are carried out during uniaxial compression tests of BMGs at different strain rates. The AE experimental failure threshold, E max , is proposed on the basis of AE cumulative energy, which reflects the intensity of damage evolution at different loading conditions. Compared with the critical shear band velocity (CSBV) associated with stick-slip dynamics of serrated flow, E max is a more sensitive failure parameter since it is connected with the local microscopic changes that occur during the material response process. Here, the E max is obtained prior to reaching the CSBV since the calculation of these two avalanches analysis focuses on the different stages of shear band growth. In particular, AE events are related to the “dry” friction process in the first stage, however, the CSBV is responsible for the “viscous” glide in the second stage. Therefore, Emax is not affected by the complex interactions between the shear bands during the stick-slip process. The maximum avalanche of serrated flow, S max , is proposed as the experimental failure threshold, which depends on the applied strain rate as S max ~ $\dot{ε}$ –λ . According to the relationship of E max and S max , the theoretical failure threshold, E max , follows a criterion E max = 2545$\dot{ε}$ –λ - 4468, where λ is equivalent to 0.15 for this work. Finally, combining the different calculations and AE measurements, this model gives new insights to predict the deformation failure behavior of Zr-based BMGs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A spatially-resolved model of neutron-irradiated tungsten coupling stochastic cluster dynamics and finite deformation plasticity

Structural materials used in nuclear reactors face severe degradation in mechanical properties, such as hardening and embrittlement. At the microscopic scale, this occurs due to creation and accumulation of irradiation-induced defects and their interaction with system dislocations. Although techniques exist which can model evolution of irradiation defects, for instance kinetic transport theory-based models, their interaction with mechanical deformation of the bulk material has not been investigated extensively. In this work, we demonstrate a novel spatially-resolved multiscale coupling between microscopic irradiation defect evolution, modeled using Stochastic Cluster Dynamics (SCD) and macroscopic mechanical deformation modeled using a finite-deformation plasticity model. SCD is used to determine the statistically averaged defect cluster spacing, dependent on operating conditions such as irradiation dose and temperature. This acts as an initial condition that governs the critical resolved shear stress of dislocation glide in the macroscopic plasticity model. This framework is used to predict mechanical behavior in post-mortem test of irradiated Tungsten samples, which has found its importance as structural material used in nuclear reactors. The results obtained using the coupled approach are in good agreement with experimental data of uniaxial tension tests. The model is able to capture the effect of temperature and irradiation dose on the material hardening. Two methods are proposed to estimate hardness – using Tabor's Law relating uniaxial yield stress to hardness and from flat-punch simulations. The results are in reasonable agreement with hardness data from micro-indentation experiments of irradiated Tungsten samples. Finally, the model is also able to reveal microstructural details such as spatial variation in defect density and local stress.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

The influence of kinematics of deformation on polycrystalline halite dynamic recrystallization: Full-field simulation of simple shear versus pure shear

Rock salt, composed mainly of halite, flows viscoplastically over a wide range of geological conditions, strongly impacting the dynamic evolution of sedimentary basins and orogens. Understanding how dislocation creep, which involves dislocation glide, intracrystalline recovery and dynamic recrystallization, influences the microstructure and rheology of halite under various deformation kinematics and temperatures is crucial for enhancing knowledge of salt flow dynamics. Here, this study employs a full-field numerical simulation method to compare the viscoplastic deformation of polycrystalline halite under simple shear and pure shear conditions up to a natural strain of ε = 1.5 at temperatures ranging from 100 °C to 300 °C. The results are presented in terms of crystallographic preferred orientation (CPO), grain shape preferred orientation (SPO), subgrain boundary direction, grain size and strain rate distribution. The results indicate that the crystallographic anisotropy of individual halite crystals is transferred to the polycrystalline scale, resulting in strain localization, particularly in simple shear simulations. The kinematics of deformation affect the evolution and distribution of high strain-rate bands, determining the direction of intragranular substructures and the morphology of strain-induced grain boundaries, with minimal impact on grain size. The intensity of grain boundary migration increases with temperature, significantly influencing grain morphology and size, thereby obscuring strain localization, while having little effect on CPOs. At low strain (ε < 1.0), CPOs relative to both the maximum shortening direction and the grain SPO are similar regardless of the deformation kinematics. At high strain (ε > 1.0), simple shear CPOs exhibit three stronger {100} maxima with a monoclinic symmetry relative to the grain SPO compared to the six {100} maxima with an orthotropic symmetry relative to the grain SPO generated under pure shear. Therefore, microstructures and CPOs can serve as indicators of the strain path in polycrystalline halite under various conditions, aiding in determining the shear sense and elucidating the deformation kinematics of salt structures.

58 GEOSCIENCES↗
DOE OSTI2026

In situ TEM annealing of neutron-irradiated Ti reveals a two-stage mechanism for elevated temperature radiation damage recovery

Understanding how irradiation-induced defects evolve at elevated temperatures is of critical importance to predicting materials' behavior under steady-state and accident scenarios. However, such mechanistic insight into microstructural evolution is limited by the nature of ex situ annealing and subsequent imaging. Here we show direct observation and quantification of defect recovery in neutron-irradiated Ti using in situ transmission electron microscopy (TEM) annealing experiments. In agreement with our prior work, and at temperatures below the irradiation temperature (T irr = 300 °C), dislocation loops are observed to glide. At elevated temperatures (>500 °C), dislocation lines become mobile and promote significant recovery of the microstructure. These mechanisms challenge the established electron irradiation-based model for radiation damage recovery, which originally suggests dissolution of static defect clusters, and demonstrates the importance of in situ characterization in understanding defect evolution in irradiated materials.

Hirst, Charles A. [Univ. of Michigan, Ann Arbor, M↗
DOE OSTI2025

Understanding the Beneficial Role of Transition-Metal Layer Na + Substitution on the Structure and Electrochemical Properties of the P2-Layered Cathode Na 2+ x Ni 2– x /2 TeO 6

Layered Na x MO 2 sodium oxide positive electrode materials have experienced renewed interest owing to the current commercial attention on sodium-ion batteries. Although there are many attractive qualities of these materials, they suffer from serious shortcomings owing to Na + ordering and transition-metal layer gliding that cause a plethora of voltage plateaus during cycling. The P2-layered Na 2+x Ni 2–x/2 TeO 6 (0 ≤ x ≤ 0.5) system provides a framework for investigating the effect of dual Na + substitution into the sodium layer and the transition-metal layer of the structure and its effects on the electrochemical properties of the materials. A careful investigation into the synthesis and properties of these materials reveals that the sodium content used during material preparation has a drastic effect on the composition and electrochemical profile of these materials. The sodium substitution disrupts ordering within the transition-metal layer, thereby disrupting Na + ordering in the adjacent sodium layers. Beyond a critical sodium concentration, the layer stacking shifts, and all voltage plateaus of the P2-Na 2 Ni 2 TeO 6 material are no longer observed at 4.4 V versus Na + /Na. These results also question the common belief that additional sodium precursor is required when preparing layered sodium oxide cathodes, providing new guidelines for material synthesis and characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphology, Deformations, and Photocatalytic Activity of Thermally Treated Brookite Titanium Dioxide Thin Films

Metastable states, in which the coupling between long-range lattice deformations and electronic properties can be controlled, provide a pathway to tailoring the behavior of photocatalytic materials by directing the flow of photoinduced charge carriers. Brookite is a metastable polymorph of earth-abundant TiO 2 that exhibits photocatalytic function and, due to its high energy relative to the anatase and rutile polymorphs, may serve as a precursor for the formation of transitional metastable structures. In this work, facile thermal annealing is employed to promote the formation of predominantly brookite-phase films, regulate the brookite lattice distortions, and determine the effect of these distortions on charge separation, ultimately directed at enhancing photocatalytic activity. Profile fitting of X-ray diffraction patterns and peak shifts in Raman spectra revealed structural distortions of the brookite lattice. Structural defects, including lattice gliding, dislocations, stacking faults, and twin boundaries, were observed using scanning transmission electron microscopy. First-principles simulations reveal how the lattice distortions associated with stacking faults induce band bending, thus increasing the photocatalytic activity of brookite. In conclusion, this study provides insight into the microstructural tuning of metastable phases to enhance their unique functionalities.

band bending↗
DOE OSTI2026

Coupling Redox Compensation and Interfacial Stabilization in Low-Ni O3-Type Sodium Layered Oxide Cathodes

Low-Ni O3-type sodium layered oxides are attractive cathodes for cost-robust sodium-ion batteries, yet high-voltage cycling is often limited by Fe-driven degradation, including cation migration/dissolution, irreversible slab gliding with large strain, particle cracking, and accelerated interfacial parasitic reactions. Here, in this study, we introduce a redox-interface codesign strategy using stoichiometric, charge-balanced Cu 2+ /Ti 4+ cosubstitution while preserving full Na stoichiometry, transitioning from NaNi 1/4 Fe 1/2 Mn 1/4 O 2 to NaNi 1/4 Fe 1/5 Mn 1/4 Cu 3/20 Ti 3/20 O 2 . With the cosubstitution, Cu and Ti suppress Fe migration and dissolution and facilitate sustained Fe oxidation at high voltage. Meanwhile, Cu is also shown to be redox-active, providing reversible cationic charge compensation that mitigates the capacity penalty typically associated with reducing Fe participation. Operando diffraction and spectroscopy collectively indicate a more reversible high-voltage structural evolution with suppressed Fe-related irreversibility. Particularly, spontaneous Ti enrichment at surface/grain-boundary regions stabilizes the cathode−electrolyte interface and promotes a more NaF-rich interphase signature. This work establishes a generalizable route to reconcile stability and capacity in low-Ni, Fe-containing O3 sodium layered oxide cathodes via compositionally encoded bulk-interfacial coupling.

25 ENERGY STORAGE↗
DOE OSTI2026

Substitution-Mediated Calcination of Nickel-Based Cathodes: Decoupling Lithiation and Crystallization

Nickel-based layered cathodes such as LiNiO 2 offer high energy density for lithium-ion batteries, yet improvements in cycling performance and safety are required for practical use–often achieved through manganese and cobalt substitution as in LiNi 0.80 Mn 0.10 Co 0.10 O 2 (NMC811). However, how such substitution impacts calcination, the key process that governs lithiation, structural ordering, crystallization, and ultimately the resulting material properties, remains unclear. Here, in this study, we investigate substitution-mediated calcination dynamics in NMC811 compared to LiNiO 2 using multiscale-correlated in situ spectroscopy and atomistic-to-mesoscale modeling. While both systems progress through the same sequence of intermediates toward the thermodynamically favored layered phase, NMC811 exhibits an earlier onset of layering, concurrent with hydroxide decomposition followed by sluggish crystallization. Modeling reveals that Mn and Co lower the energy barrier for lithium incorporation and ordering but increase the penalty for interlayer gliding, thereby slowing crystal growth at elevated temperatures. This substitution-mediated decoupling of lithiation and crystallization explains the fine-grained microstructure observed in NMC811 versus coarsened particles in LiNiO 2 and establishes a mechanistic framework for predictive microstructure engineering of Ni-based cathodes.

Calcination↗
DOE OSTI2025

Seismic Tremors From Sea‐Landfast Ice Interactions Near Utqiaġvik, Alaska

The mechanical state of Arctic landfast sea ice remains poorly constrained due to limited observations. This study investigates interactions between drifting sea ice and the coastal landfast ice near Utqiaġvik, Alaska by integrating data from broadband seismometer, Distributed Acoustic Sensing, and marine radar. We find that decreases in sea ice velocity, marking transitions from drift to compressive contact, coincide with increased seismic energy. Tremor characteristics vary seasonally with ice conditions. In January, dense ice packs produced sustained harmonic tremors with gliding and U-shaped spectral features, consistent with repetitive stick-slip motion at the ice–ice or ice–ground interface under velocity-weakening friction. In April, smaller fragmented floes generated short-lived, chaotic tremors linked to brittle failure and spatially dispersed impacts. These findings demonstrate that seismic tremors encode the mechanical properties of interacting ice, offering a new tool to distinguish ice regimes and monitor evolving Arctic coastal dynamics under climate change.

58 GEOSCIENCES↗
DOE OSTI2025

Transition metal vacancy and position engineering enables reversible anionic redox reaction for sodium storage

Triggering the anionic redox reaction is an effective approach to boost the capacity of layered transition metal (TM) oxides. However, the irreversible oxygen release and structural deterioration at high voltage remain conundrums. Herein, a strategy for Mg ion and vacancy dual doping with partial TM ions pinned in the Na layers is developed to improve both the reversibility of anionic redox reaction and structural stability of layered oxides. Both the Mg ions and vacancies (□) are contained in the TM layers, while partial Mn ions (~1.1%) occupy the Na-sites. The introduced Mg ions combined with vacancies not only create abundant nonbonding O 2p orbitals in favor of high oxygen redox capacity, but also suppress the voltage decay originated from Na–O–□ configuration. The Mn ions pinned in the Na layers act as “rivets” to restrain the slab gliding at extreme de-sodiated state and thereby inhibit the generation of cracks. The positive electrode, Na 0.67 Mn 0.011 [Mg 0.1 □ 0.07 Mn 0.83 ]O 2 , delivers an enhanced discharge capacity and decent cyclability. This study provides insights into the construction of stable layered oxide positive electrode with highly reversible anionic redox reaction for sodium storage.

Cai, Congcong [Wuhan Univ. of Technology (China)]↗
DOE OSTI2025

Divergent evolution of slip banding in CrCoNi alloys

Abstract Metallic materials under high stress often exhibit deformation localization, manifesting as slip banding. Over seven decades ago, Frank and Read introduced the well-known model of dislocation multiplication at a source, explaining slip band formation. Here, we reveal two distinct types of slip bands (confined and extended) in compressed CrCoNi alloys through multi-scale testing and modeling from microscopic to atomic scales. The confined slip band, characterized by a thin glide zone, arises from the conventional process of repetitive full dislocation emissions at Frank–Read source. Contrary to the classical model, the extended band stems from slip-induced deactivation of dislocation sources, followed by consequent generation of new sources on adjacent planes, leading to rapid band thickening. Our findings provide insights into atomic-scale collective dislocation motion and microscopic deformation instability in advanced structural materials.

Science & Technology - Other Topics↗
DOE OSTI2024

Dark states of electrons in a quantum system with two pairs of sublattices

A quantum state of matter that is forbidden to interact with photons and is therefore undetectable by spectroscopic means is called a dark state. This basic concept can be applied to condensed matter where it suggests that a whole band of quantum states could be undetectable across a full Brillouin zone. Here we report the discovery of such condensed-matter dark states in palladium diselenide as a model system that has two pairs of sublattices in the primitive cell. By using angle-resolved photoemission spectroscopy, we find valence bands that are practically unobservable over the whole Brillouin zone at any photon energy, polarization and scattering plane. Our model shows that two pairs of sublattices located at half-translation positions and related by multiple glide-mirror symmetries make their relative quantum phases polarized into only four kinds, three of which become dark due to double destructive interference. This mechanism is generic to other systems with two pairs of sublattices, and we show how the phenomena observed in cuprates, lead halide perovskites and density wave systems can be resolved by the mechanism of dark states. Our results suggest that the sublattice degree of freedom, which has been overlooked so far, should be considered in the study of correlated phenomena and optoelectronic characteristics.

electronic properties and materials↗
DOE OSTI2026

Frieze charge-stripes in a correlated kagome superconductor

In kagome metals, geometric frustration, electronic correlations and band topology combine to produce a wide range of intriguing phenomena. Among them, CsCr$_3$Sb$_5$ offers an opportunity to investigate unconventional superconductivity in a strongly correlated kagome system, with indications of frustrated magnetism and quantum criticality. Here, we demonstrate a cascade of density-wave transitions with distinct symmetries in bulk single crystals of CsCr$_3$Sb$_5$. Using spectroscopic imaging scanning tunneling microscopy, we uncover a unidirectional density wave that breaks all mirror symmetries -- resembling a chiral density wave -- but that also retains a mirror glide symmetry. We refer to this as a frieze charge stripe order phase, as its symmetry properties correspond to one of the fundamental frieze symmetry groups. A combination of high-resolution imaging, Fourier analysis and theoretical simulations reveal the key role of sublattice degrees of freedom in stabilizing this phase, characterized by internal chiral textures of opposite handedness. These findings suggest that superconductivity in CsCr$_3$Sb$_5$ emerges from this distinct density wave state and provide fresh insight into realizing electronic phases governed by frieze symmetry groups in quantum materials.

Cheng, Siyu [Boston College, Chestnut Hill, MA (Un↗