SEARCH · Search NASA

Results for “Moderator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Approximation of ice phenology of Maine lakes using Aqua MODIS surface temperature data

Studies of lake ice phenology have historically relied on limited in situ data. Relatively few observations exist for ice out and fewer still for ice in, both of which are necessary to determine the temporal extent of ice cover. Satellite data provide an opportunity to better document patterns of ice phenology across landscapes and relate them to the climatological drivers behind changing ice phenology. We developed a model, the Cumulative Sum Method (CSM), that uses daytime and nighttime surface temperature observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor on board the Earth-observing Aqua satellite to approximate ice in (the onset of ice cover) and ice out from training datasets of 13 and 58 Maine lakes, respectively, during the 2002/2003 through 2017/2018 ice seasons. Ice in was signaled by reaching a threshold of cumulative negative degrees following the first day of the season below 0°C. Ice out was signaled by reaching a threshold of cumulative positive degrees following the first day of the year above 0°C. The comparison of observed and remotely sensed ice-in dates showed relative agreement with a correlation coefficient of 0.71 and a mean absolute error (MAE) of 9.8 days. Ice-out approximations had a correlation coefficient of 0.67 and an MAE of 8.8 days. Lakes smaller in surface area and nearer the Atlantic coast had the greatest error in approximation. Application of the CSM to 20 additional lakes in Maine produced a comparable ice-out MAE of 8.9 days. Ice-out model performance was weaker for the warmest years; there was a larger MAE of 12.0 days when the model was applied to the years 2019–2023 for the original 58 lakes. The development of this model, which utilizes daily satellite data, demonstrates the promise of remote sensing for quantifying ice phenology over short, temporal scales, and wider geographic regions than can be observed in situ, and allows exploration of the influence of surface temperature patterns on the process and timing of ice in and ice out.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Connectivity, Pathology, and ApoE4 Interactions Predict Longitudinal Tau Spatial Progression and Memory

ABSTRACT Tau pathology spread into neocortex indicates a transition from healthy aging to Alzheimer's disease (AD). Connectivity between tau epicenters and later accumulating regions of cortex has been proposed as a mechanism of tau spread, but how this relationship changes with greater AD pathology burden or genotype is not understood. We investigated tau accumulation in two key regions, precuneus and inferior temporal cortex, using resting state functional connectivity (rsFC) and longitudinal PET imaging from a multicohort sample of cognitively unimpaired older adults. We examined how baseline tau PET, Aβ PET, and ApoE4 genotype status interact with rsFC between hippocampus and these downstream regions to predict rate of tau accumulation in neocortex. We found that the 3‐way interaction between connectivity, baseline tau, and baseline Aβ or ApoE4 status was associated with neocortical tau accumulation in precuneus and inferior temporal cortex. In addition, baseline tau, Aβ, and ApoE4 status also moderated the association between connectivity and rate of memory decline. Together, these results suggest that the extent and distribution of future tau accumulation may be predicted by the interaction of baseline connectivity, AD pathology, and genetic risk.

Neurosciences & Neurology↗

DOE OSTI2024

Raccoon density estimation from camera traps for raccoon rabies management

Abstract Density estimation for unmarked animals is particularly challenging, yet density estimates are often necessary for effective wildlife management. Raccoons ( Procyon lotor ) are the primary terrestrial wildlife reservoir for Lyssavirus rabies within the United States. The raccoon rabies variant (RRVV) is actively managed at landscape scales using oral rabies vaccination (ORV) within the eastern United States. To effectively manage RRVV, it is important to know the density of raccoons to appropriately scale the density of ORV baits distributed on the landscape. We compared methods to estimate raccoon densities from camera‐trap data versus more intensive capture‐mark‐recapture (CMR) estimates across 2 land cover types (upland pine and bottomland hardwood) in the southeastern United States during 2019 and 2020. We evaluated the effect of alternative camera configurations and durations of camera trapping on density estimates and used an N‐mixture model to estimate raccoon densities, including covariates on abundance and detection. We further compared different methods of scaling camera‐based counts, with the maximum number of raccoons seen on any given image within a day best explaining density. Camera‐trap density estimates were moderately correlated with CMR estimates ( r = 0.56). However, densities from camera‐trap data were more reliable when classifying category of density as an index used to inform management (83% correct when compared to CMR estimates), although the densities in our study fell into the 2 lowest density classes only. Using more cameras reduced bias and uncertainty around density estimates; however, if ≤6 camera traps were used at a site, a line transect approach proved less biased than a grid design. Camera trapping should be conducted for at least 3 weeks for more accurate estimates of raccoon population density in our study area (<5% bias). We show that camera‐trap data can be used to assign raccoon densities to management‐relevant density index bins, but more studies are needed to ensure reliability across a greater range of environmental conditions and raccoon densities.

Davis, Amy J.↗

DOE OSTI2025

Impact of Grazing Duration and Environment on Soil Carbon in Reclaimed Uranium Mines Tailings: A Region Specific Study

ABSTRACT Grassland ecosystems, which cover over one‐third of the Earth's land area, store 10%–30% of global soil carbon (C). However, these ecosystems face substantial impacts from human activities, including mining. This study investigates the spatial distribution of soil C and related environmental factors in reclaimed grasslands on former uranium mine sites in Wyoming. We hypothesized that grazing duration and environmental factors would influence soil C levels. Interactions between topography, vegetation diversity, soil properties, and soil C in the context of grazing management in both natural and reclaimed grasslands from a wide range of periods from 1 year to 100 years were analyzed using geographically weighted regression models. Data collected from 2022 to 2023 showed that total carbon was consistently higher in natural grasslands (1.2%–4.9%) than in reclaimed grasslands (0.8%–1.3%). Additionally, soil C was significantly higher in natural grasslands grazed for 1 year compared to those grazed for 100 years. In contrast, reclaimed grasslands had lower soil C in areas grazed for 1 year compared to those grazed for 7 or 14 years. The absolute values of coefficients from environmental covariates indicated that areas grazed for a shorter duration (~1 year) were more influenced by biotic and abiotic factors than areas grazed for longer periods (> 7 years). Our findings show moderate grazing increases the resiliency of grassland ecosystems when grazed 7 years or longer and acknowledge the roles of topographic, soil, and vegetative factors in enhancing soil C concentration and developing sustainable land management practices in rangeland conditions.

Shilpakar, Chandan [Department of Plant Sciences U↗

DOE OSTI2025

Solventless Dual‐Cure Liquid Resins Via Circular Use of Phthalic Anhydride for Recyclable Composite Applications

Abstract Fiber‐reinforced composites (FRCs) possess a remarkable strength‐to‐weight ratio, making them ideal light‐weighing alternative materials of metals used in automotive, aerospace, and outdoor equipment applications, but their recycling is challenging. Chemically recyclable thermoset polymers can enable fiber recovery and reuse; however, challenges remain in the separation and purification of depolymerized small molecules for efficient polymer recycling. To this end, a series of liquid resins for chemically recyclable polymer networks is designed based on phthalic anhydride, a widely produced and inexpensive chemical. The straightforward sublimation of phthalic anhydride is leveraged to enable a simple and efficient separation process for polymer recycling. To liquefy phthalic anhydride, five mono‐acryloyl‐phthalates are synthesized to obtain stable liquid resins together with phthalic diglycidyl ester. These liquid resins undergo dual‐cure reactions that comprise photopolymerization of acrylate and, subsequently, heat‐mediated epoxy‐acid polymerization reactions. These liquid resins exhibit moderate viscosities (2600–6400 cP @ 22 °C), fast curing, and robust thermomechanical properties (T g s from 71 to 116 °C). It is demonstrated that hydrolysis of the dual‐cured polymers completes within 2 h at 80 °C, and direct sublimation produces phthalic anhydride with 82% yield. This resin system is expected to provide a cost‐competitive, highly efficient platform for recyclable FRCs.

Polymer Science↗

DOE OSTI2025

Second‐ and Third‐Order Elastic Constants of Inert and Energetic Molecular Crystals From Density Functional Theory

Complete tensors of the second- and third-order elastic constants of the organic molecular crystals acetaminophen, pentaerythritol tetranitrate (PETN), cyclotrimethylene trinitramine (RDX), cyclotetramethylene tetranitramine (HMX), 1,1-diamino-2,2-dinitroethylene (FOX-7), hexanitrohexaazaisowurtzitane (CL-20), and erythritol tetranitrate (ETN) have been calculated using dispersion-corrected density functional theory. The sets of second- and third-order elastic constants are expected to provide a more accurate and reliable description of the behavior of these materials under nonhydrostatic loads than pressure- and volume-dependent second-order elastic constants. The tensors of second-order constants have been compared with experimental data and/or other calculations when possible, and with the exception of results for CL-20 from Brillouin scattering experiments, we find good agreement. The calculated third-order elastic constants of PETN are in very good agreement with the subset of third-order constants derived from experimental wave speed measurements. The elastic anisotropies of the crystals have been estimated using the universal elastic anisotropy index, which shows that the crystals fall into three groups with low anisotropy (PETN, RDX, and CL-20), moderate anisotropy (acetaminophen, HMX, and ETN), and high elastic anisotropy (FOX-7).

36 MATERIALS SCIENCE↗

DOE OSTI2026

Characterization of NBCMA—A DAPO Precursor

As part of our investigation into the process optimization of 2,6-diaminopyrazine-1-oxide (DAPO), small-scale sensitivity testing (impact, friction, and ESD) was conducted on the precursor, N-nitroso-bis(cyanomethyl)amine (NBCMA). NBCMA exhibited moderate sensitivity to friction, whereas no sensitivity to impact or spark was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Haze–cloud correlations mediated by supersaturation fluctuations

Atmospheric aerosol particles that contain water-soluble components can absorb water vapor in humid environments and form either haze particles or cloud droplets, depending on supersaturation conditions. Laboratory and in situ measurements have shown that haze particles and cloud droplets often coexist and compete for available water vapor in shallow clouds and fogs, especially under polluted conditions. It is expected that more aerosol particles can form more haze particles and cloud droplets, so that the haze and cloud number concentrations are positively correlated. However, recent large-eddy simulations show that haze and cloud number concentration can be negatively correlated under extremely polluted conditions. Haze–cloud interactions across different environmental settings remain poorly understood. In this study, experiments in a convection cloud chamber with the same aerosol injection rate show that, as supersaturation forcing increases (i.e., changing from polluted to clean conditions), the covariance between haze and cloud droplet number concentration changes from negative to positive and finally to zero. Large-eddy simulations (LES) of the cloud chamber with a fixed supersaturation forcing but varying aerosol injection rates show a similar result for the haze–cloud correlation: near zero in clean, mean-supersaturation-dominated activation conditions; positive in moderate, supersaturation-fluctuation-influenced activation conditions; and negative in polluted, supersaturation-fluctuation-dominated activation conditions. A theoretical covariance framework was developed to interpret this behavior based on the relative magnitude and signs of the correlations between supersaturation and the populations of haze and cloud droplets. Significantly, experiments, LES, and theory all yield the same three-regime behavior for the sign of the haze–cloud covariance. Furthermore, our results show that the haze–cloud covariance remains robust and easily measurable, thereby providing a useful metric for regime identification in the atmosphere, improving regime-aware parameterizations, and informing aerosol interventions such as fog dispersion, rainfall enhancement, and albedo modification.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Polycarbonate‐Based Solid‐Polymer Electrolytes for Solid‐State Sodium Batteries

Solid-polymer electrolytes comprised of polypropylene carbonate (PPC) and varied sodium bis(fluorosulfonyl)imide (NaFSI) salt concentrations are investigated for implementation as a conductive solid polymer electrolyte into solid-state cathode composites utilizing a sodium-layered oxide active material. The ionic conductivity generally increases with NaFSI salt content, reaching ≈1 mS cm −1 at 80 °C at the highest salt concentration (PPC:NaFSI = 0.5:1). Through an all-in-one slurry casting method, Na 2/3 Ni 1/3 Mn 2/3 O 2 cathode composites are fabricated in which the dispersed PPC electrolyte acts as the primary binder. Enabled by a bilayer polymer electrolyte system, cycling performance with the PPC cathode electrolyte is optimized with respect to salt concentration and anode material. The best cyclability is achieved with a moderate salt concentration electrolyte (PPC:NaFSI = 5:1), showcasing an initial capacity of 83 mA h g −1 with a remarkable 80% capacity retention after 150 cycles at C/5 rate and 60 °C. The superior performance of the lower salt concentration electrolyte is attributed to better electrochemical stability, as confirmed by linear sweep voltammetry and online electrochemical mass spectrometry measurements. In conclusion, these results underscore the potential of carbonate-based polymer electrolytes and the importance of balancing electrolyte conductivity and stability in cell design.

25 ENERGY STORAGE↗

DOE OSTI2025

Identification and mapping of quantitative trait loci for Fusarium head blight resistance in a synthetic hexaploid × hard red spring wheat population

Abstract Fusarium head blight (FHB), caused byFusarium graminearumSchwabe, is one of the most devastating diseases in wheat (Triticum aestivumL.). The synthetic hexaploid wheat line Largo was developed from a cross between the durum wheat [T. turgidumssp.durum(Desf.) Husn.] variety Langdon and theAegilops tauschiiCosson accession PI 268210, and it was previously found to have a moderate level of FHB resistance. This study was conducted to identify quantitative trait loci (QTL) associated with FHB resistance using a population of 188 recombinant inbred lines (RILs) from a cross between Largo and the susceptible wheat line ND495. The RILs were evaluated for Type II resistance in two greenhouse and two field environments. The disease severity and 90K single‐nucleotide polymorphism marker data were used for QTL analysis, which revealed six QTL on chromosomes 1D, 2D, 5B, and 7D. Four QTL (QFhb.rwg‐1D,QFhb.rwg‐5B,QFhb.rwg‐7D.1, andQFhb.rwg‐7D.3) from Largo had minor effects, whereas two QTL (QFhb.rwg‐2DandQFhb.rwg‐7D.2) from ND495 showed large effects on FHB resistance. The result suggested that ND495 may possess suppressor or susceptibility gene(s) suppressing or masking FHB resistance controlled by the resistance QTL. Among these QTL, four coincided with previously reported QTL, includingFhb9, and two (QFhb.rwg‐1DandQFhb.rwg‐7D.1) are likely novel QTL. From the six QTL regions, 10 Kompetitive allele‐specific PCR markers were developed and validated for marker‐assisted selection. The QTL detected from the resistant and susceptible parents enhance our understanding of FHB resistance expression and provide new resources for improving FHB resistance in wheat.

Genetics & Heredity↗

DOE OSTI2026

An Analysis of Future Wind Energy Resources and Cost Uncertainties Across the United States

Wind power is a growing source of energy generation that relies on complex global atmospheric and earth system processes. There has been evidence of reductions in average wind speeds over land in North America since the 1980s, and several models project that average wind speeds will continue to decrease. Concurrently, the cost of wind energy systems in the United States has been decreasing since around 2010, a trend also projected to continue. There is considerable uncertainty in these future projections, with quantitative estimates of future wind resource and system costs varying widely. To study this, we run wind energy models with possible future system costs, turbine designs, and meteorological inputs from multiple downscaled earth system models over the contiguous United States. Changes in mean annual energy production from 2000-2019 to 2040-2059 can be as high as +10% in South Texas or as low as -20% in Iowa. Larger turbines and moderate reductions in system costs can offset the largest projected decreases in wind resource, but much uncertainty remains in the extent to which wind resources will change and to what extent system costs can be reduced. An analysis of variance shows, in several states in the Midwest, uncertainty in future wind resources can influence the cost of wind energy nearly as much as uncertainty in future system costs.

17 WIND ENERGY↗

DOE OSTI2026

Observations of the Marine Atmospheric Boundary Layer’s Response to a Solar Eclipse

The atmospheric response to the solar eclipse of 8 April 2024 in North America is investigated with a specific focus on the marine atmospheric boundary layer (MABL). We leverage measurements collected during the Third Wind Forecast Improvement Project (WFIP3), including Doppler lidars, sonic anemometers, and thermodynamic profiler data to investigate the atmospheric response across sites that experienced partial eclipse conditions with nearly 90% obscuration. Using these measurements, we examine eclipse-induced changes in key meteorological parameters, such as temperature, wind speed, and turbulent fluxes. Most previous eclipse studies have been conducted over land, whereas this study provides new observations for both coastal and marine environments, offering additional insight into eclipse-driven variability in the MABL. The findings confirm a notable decrease in downwelling shortwave radiation during the eclipse, which results in rapid cooling of surface air. The temperature reduction ranges from $1.2^\circ \text {C}$ to $1.4^\circ \text {C}$ in coastal regions and from $0.3^\circ \text {C}$ to $0.5^\circ \text {C}$ over the ocean. This analysis suggests that the MABL’s higher thermal inertia compared to coastal regions moderates the temperature decrease during the eclipse. Wind speed exhibits a more complex behavior, as it is influenced by both the MABL and preexisting synoptic conditions. Although a reduction in wind speed is observable up to approximately 140 m above ground level (AGL) at more inland sites, at other locations closer to the coast, this reduction is constrained to the lowest 100 m AGL. Turbulence parameters retrieved from sonic anemometers, such as turbulence kinetic energy, turbulent heat flux, and friction velocity, decrease during the eclipse at coastal sites, accompanied by a brief transition of atmospheric stability from unstable to neutral or weakly stable conditions. For the open-ocean sites, the variability in turbulence statistics and atmospheric stability is minimal during the occurrence of the eclipse.

16 TIDAL AND WAVE POWER↗

DOE OSTI2025

Convergence analysis for a nonlocal gradient descent method via directional Gaussian smoothing

We analyze the convergence of a nonlocal gradient descent method for minimizing a class of high-dimensional non-convex functions, where a directional Gaussian smoothing (DGS) is proposed to define the nonlocal gradient (also referred to as the DGS gradient). The method was first proposed in [Zhang et al., Enabling long-range exploration in minimization of multimodal functions, UAI 2021], in which multiple numerical experiments showed that replacing the traditional local gradient with the DGS gradient can help the optimizers escape local minima more easily and significantly improve their performance. However, a rigorous theory for the efficiency of the method on nonconvex landscape is lacking. In this work, we investigate the scenario where the objective function is composed of a convex function, perturbed by deterministic oscillating noise. We provide a convergence theory under which the iterates exponentially converge to a tightened neighborhood of the solution, whose size is characterized by the noise wavelength. Here, we also establish a correlation between the optimal values of the Gaussian smoothing radius and the noise wavelength, thus justifying the advantage of using moderate or large smoothing radii with the method. Furthermore, if the noise level decays to zero when approaching the global minimum, we prove that DGS-based optimization converges to the exact global minimum with linear rates, similarly to standard gradient-based methods in optimizing convex functions. Several numerical experiments are provided to confirm our theory and illustrate the superiority of the approach over those based on the local gradient.

Tran, Hoang [Oak Ridge National Laboratory (ORNL),↗

DOE OSTI2026

Evaluating ecosystem water use efficiency under drought stress: a case study of the Helan Mountain region, northwest China

Context Water use efficiency (WUE) is a fundamental ecological indicator links carbon assimilation and water loss in terrestrial ecosystems. Understanding its responses to drought stress is essential for adaptive ecosystem management, particularly in climate-sensitive mountain landscapes. Objectives This study aimed to investigate drought-driven variations in WUE across major vegetation types in the Helan Mountain region of Northwest China. Specifically, we sought to identify dominant ecological drivers of WUE variability and to disentangle their relative importance and causal pathways. Methods We quantified WUE using the Moderate Resolution Imaging Spectroradiometer (MODIS) products and the Drought Severity Index (DSI) data from 2001 to 2020. To examine WUE – drought relationships across contrasting vegetation types, we employed a spatially explicit analytical framework integrating Random Forest (RF) modeling, partial correlation analysis, and structural equation modeling (SEM). Results Regional WUE exhibited relatively stable interannual dynamics, yet pronounced spatial heterogeneity that was strongly modulated by drought conditions. Vegetation properties, particularly Leaf Area Index (LAI) and Normalized Difference Vegetation Index (NDVI), emerged as the dominant determinants of WUE, with NDVI alone explaining over 20% of its spatial variance in forest and grassland during non-drought periods. SEM analyses revealed that climate forcing influenced WUE mainly through indirect pathways mediated by soil moisture availability and vegetation structural dynamics, rather than through direct climatic controls. Among all regulating factors, LAI acted as the central control node governing ecosystem carbon–water coupling. In contrast, short-term climatic stress, especially atmospheric demand and drought duration, exerted weak or negative direct effects on WUE. Ecosystem-specific responses were observed, with croplands mainly regulated by soil water availability, whereas forests and grasslands showed more sensitive to atmospheric drought stress. Together, these results reveal a hierarchical control framework where soil–vegetation interactions mediate climate impacts on WUE, driving strong spatial heterogeneity in drought responses across mountain landscapes. Conclusions Our findings highlight the pivotal role of indirect drought effects mediated by vegetation and soil processes in shaping ecosystem WUE. The identified soil–vegetation–climate regulatory hierarchy provides mechanistic insight into landscape–scale drought sensitivity and supports integrated modeling approaches for evaluating ecosystem resilience and sustainable management in arid mountain regions.

China↗

DOE OSTI2026

How exudates production along a phosphorus gradient influences mineral dissolution across contrasting soil development stages

Harnessing rhizosphere processes offers a valuable opportunity to optimize nutrient use efficiency in agroecosystems. In nutrient-limited soils, plants discharge part of photosynthate surplus via root exudation, including carboxylates, which may enhance mineral dissolution and nutrient mobilization. We aimed to assess how plant responses to nutrient limitation translated into changes in exudate profiles, and how these exudates, in turn, drive bioweathering processes across soils of contrasting mineralogy and weathering degree. We conducted a hydroponic experiment with Lupinus albus grown under five phosphorus (P) concentrations (5, 10, 20, 30, and 50 µM) over seven weeks. We measured plant biomass and root traits, performed a metabolomics analysis and quantified seven carboxylates in root exudates using gas chromatography-mass spectrometry. To assess bioweathering processes across contrasted soil domains, we conducted batch dissolution tests with exudates using three soil horizons—35 each with distinct physicochemical properties: enriched in organic matter, iron oxides, or primary silicates. At the intermediate level of P supply, shoot biomass was comparable to that under high P, but plants produced more root biomass and a higher total carboxylate exudation rate. Despite low carboxylate concentrations (<100 ppb), exudates promoted the dissolution of Ca, Mg, Si, Fe, P and K in all horizons. Yet, the degree of element released varied among horizons. These findings highlight the importance of root exudates in enhancing mineral dissolution, with effects dependent on soil physicochemical properties. The results suggest that managing agroecosystems under moderate nutrient limitation could be a sustainable strategy to increase root-to-shoot ratios, enhance bioweathering processes and nutrient release in soil solution.

Pollet, Sasha L.↗

DOE OSTI2024

The environmental impact of hydropower: a systematic review of the ecological effects of sub-daily flow variability on riverine fish

Hydropower can help facilitate power grid decarbonization because it can respond to short-term changes in power demand and is comparatively more reliable than intermittent wind and solar. However, flexible hydropower operations can create rapid and abnormal fluctuations in downstream flow conditions, which can negatively impact aquatic ecosystems. Accordingly, we conducted a systematic review on the ecological effects of hydropower-driven sub-daily flow variability (SDFV) on riverine fishes. We reviewed and synthesized 109 articles relevant to fish-SDFV relationships from seven sources, most of which focused on Salmonids in North America and northern and western Europe and were published in the last 15 years. We found strong agreement in the literature that SDFV increases fish stranding risk, destabilizes habitat, and decreases production and diversity. We found moderate agreement that SDFV interrupts fish reproduction, increases or has no impact on condition, and prompts or discourages movement depending on local channel conditions. We found little to no agreement for relationships between SDFV and mortality, physiology, and behavior. The effects of SDFV on riverine fish ecology are intertwined in the complex suite of biotic and abiotic characteristics that structure aquatic ecosystems and are highly site-, species-, and life stage-specific. Assessments of the impact of SDFV on fish ecology should first characterize local habitat and channel quality and fish community composition to identify specific, measurable ecological outcomes to sustain or enhance, and then design mitigation strategies tailored to those ecological objectives.

13 HYDRO ENERGY↗

DOE OSTI2026

A multi-backend autotuning study of feature selection on GPUs

Abstract Feature selection is an important step in machine learning that can benefit from GPU acceleration. As the number of GPU vendors increases, it is imperative to adapt algorithms such as the minimum Redundancy Maximum Relevance (mRMR) feature selection method to different backends that support several GPU architectures. This work presents a multi-backend implementation of mRMR across CUDA, HIP, and SYCL, and studies its performance when combined with Bayesian optimization and transfer learning to automatically tune execution parameters for different platforms and datasets. Our experimental results show that when tuned, CUDA and HIP achieve comparable performance on NVIDIA architectures, while SYCL exhibits a moderate performance gap. Overall, this work highlights the impact of backend choice and autotuning on GPU-accelerated feature selection and provides insights into deploying mRMR across heterogeneous environments.

Beceiro, Bieito (ORCID:0000000333014890)↗

DOE OSTI2024

Phase Selection During Solidification and Solid-State Phase Transformations in an Al-10Ce-8Mn (wt pct) Alloy

In multicomponent Al-Ce alloys, and especially after additive manufacturing (AM), complex and metastable solidification microstructures are frequently observed. Here, in this research, the relationship between solidification conditions and phase selection are explored for an Al-10Ce-8Mn (wt pct) alloy using a systematic study of laser melting conditions. Three solidification modes were observed: primary Al 10 Mn 2 Ce; primary Al 20 Mn 2 Ce; and eutectic FCC Al + Al 20 Mn 2 Ce. These solidification modes were correlated to specific liquid-solid interface velocities using a simple thermal model, showing the change in primary solidification phase for low (< 6.8 × 10 −4 m/s), moderate (between 8.2 × 10 −4 and 5.9 × 10 −2 m/s) and high solidification velocities (> 6.2 x 10 −2 m/s) for the above three solidification microstructures, respectively. These results were rationalized by using interface response function (IRF) theory to describe the solidification undercooling for the possible primary intermetallic phases. The implication of the local phase selection from differing solidification conditions is summarized by a comparison of hardness which demonstrates the potential variance of Vickers hardness from 101 to 242 (VHV) by changing the laser velocity from 1 to 83 mm/s. Interestingly, on heat treatment at 400°C, the decomposition pathways of the solidification microstructure and hardness were also found to be different, thereby opening multiple pathways for spatial microstructure and property control within AM components.

Sisco, Kevin↗