Nanoscale Chemical Imaging of Nanoparticles under Real-World Wastewater Treatment Conditions
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “Morphology evolution”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantifying biofilm propagation on chemically modified surfaces
Conditions affecting biofilm formation differ among bacterial species and this presents a challenge to studying biofilms in the lab. This work leverages functionalized silanes to control surface chemistry in the study of early biofilm propagation, quantified with a semi-automated image processing algorithm. These methods support the study of Pantoea sp. YR343, a gram-negative bacterium isolated from the poplar rhizosphere. We found that Pantoea sp. YR343 does not readily attach to hydrophilic surfaces but will form biofilms with a “honeycomb” morphology on hydrophobic surfaces. Our image processing algorithm described here quantified the evolution of the honeycomb morphology over time, and found the propagation to display a logarithmic behavior. This methodology was repeated with a flagella-deficient fliR mutant of Pantoea sp. YR343 which resulted in reduced surface attachment. Quantifiable differences between Pantoea WT and ΔfliR biofilm morphologies were captured by the image processing algorithm, further demonstrating the insight gained from these methods.
59 BASIC BIOLOGICAL SCIENCES↗
Novel processing route for design and manufacturing of metal toughened nanoceramics: Al–Al 2 O 3 nanocermets
Monolithic alumina is a highly brittle ceramic with a very low fracture toughness, making it an unreliable material for mechanical and structural applications. Ceramic-metal composites (cermets) are the subject of intensive interest to obtain materials which can address the intrinsic brittleness of ceramics without compromising their high strength and light weight. In the present investigation, aluminium-alumina (Al–Al 2 O 3 ) nanocermets were developed. The nanocermets possessed the toughness of Al phase and the strength of reinforced nano Al 2 O 3 particles. Here, the nanocermets green bodies were prepared such that upon sintering each adjacent Al 2 O 3 grain was conformally coated with a continuous Al film. Mechanical milling via a combination of cryo-milling and ball-milling was used to prepare Al–Al 2 O 3 nano-powder mixture. Spark plasma sintering was used to consolidate the green nanocermets. Results show that specimens prepared from 35 h milled powders exhibited superior mechanical properties as compared to other nanocermets, with an improvement in microhardness, elastic modulus, compressive strength, and flexural strength by 88%, 78%, 69% and 40% with respect to sintered pure Al. The indentation toughness of 35 h milled nanocermet showed an increment of 12.5% with respect to sintered pure Al 2 O 3 . Characterization techniques such as XRD, SEM, HR-TEM, X-ray tomography were employed to investigate the phase evolution and structural morphology, while FEM simulations were performed for understanding the crack propagation mechanisms in nanocermets.
36 MATERIALS SCIENCE↗
Replacement of Calcium Carbonate Polymorphs by Cerussite
Calcium carbonate (CaCO 3 ) polymorphs, calcite, aragonite, and vaterite, serve as a major sink to retain various metal ions in natural and engineered systems. Here, we visualize the systematic trends in reactivities of calcite, vaterite, and aragonite to Pb 2+ dissolved in acidic aqueous solutions using in situ optical microscopy combined with ex situ scanning electron and transmission X-ray microscopies. All three polymorphs undergo pseudomorphic replacement by cerussite (PbCO 3 ) but with distinct differences in the evolution of their morphologies. The replacement of calcite and aragonite occurs through the formation of a pseudomorphic cerussite shell (typically 5–10 μm thick) followed by a slower inward propagation of reaction fronts through a thin solution gap (~0.1 μm wide) between the shell and the CaCO 3 substrate. The replacement of vaterite is characterized by the formation of a thinner cerussite shell (≤1 μm thick) and a larger cavity between the shell and the host mineral. These systematic differences in cerussite morphology for different CaCO 3 polymorphs are explained by the relative dissolution and precipitation rates of the reactant and product minerals, coupled with the role of ion transport through the cerussite shells. We also find that the replacement of calcite by cerussite is the slowest when all three polymorphs coexisted. Furthermore, our results provide mechanistic insights into the growth mode of cerussite on dissolving calcium carbonate and demonstrate these CaCO 3 polymorphs as promising substrate materials for removal and recycling of Pb from acidic polluted water and industrial effluents.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Deuterium plasma induced preferential erosion in ultra-high temperature ceramics TiB 2 and ZrB 2 *
Abstract Steady-state deuterium plasma exposures were performed on ultra-high temperature ceramics titanium diboride (TiB 2 ) and zirconium diboride (ZrB 2 ) using the PISCES-RF linear plasma device (LPD) as early screening for first wall, plasma-facing applications. Deuterium plasma exposures were performed using 40 eV ion energies at 240, 525, and 800 °C sample temperatures and 90 eV ion energies at 240 °C sample temperatures to analyze TiB 2 and ZrB 2 surface morphology and chemistry evolution behavior. Post-plasma exposure chemistry characterization of the near surface ( < 50 nm) region of the samples all show transition metal enrichment, indicating boron preferential erosion. Transition metal to boron fractions vary with plasma exposure temperature under the 40 eV ion energy; metal enrichment is maximized at 800 °C and then minimized at 525 °C. SEM micrographs of all plasma exposed sample surfaces show no significant or noticeable plasma induced damage from cracking or blistering.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Room Temperature Electrorefining of Rare Earth Metals from End-of-use Nd-Fe-B Magnets
Recovering rare earth elements (REE) from used permanent magnets, which contains about 30 wt.% of rare earth elements, has been persistent technological challenge. Current recycling methods relies on pyrometallurgical or hydrometallurgical processes which are energy- and chemical- intensive and not economically and environmentally viable for rare earth containing magnets. Enabling efficient and simplistic recovery and refining of REEs contained in End-of-Use (EoU) products, such as Neodymium-Iron-Boron (Nd-Fe-B) based magnets will play an important and complementary role in the total supply of REEs in the future. We designed a new electrochemical method and demonstrated a room temperature one-pot process that concurrently separates and electroplates REE from commercial Nd-Fe-B magnets. By establishing selective oxidation and reductive potential as electrochemical control parameter along with electrochemically compatible non-aqueous electrolyte system, we demonstrated selective electroleaching of lanthanides (Nd and Preseodymium (Pr)) from anode and concurrent plating as alloy at Pt cathode. The morphological and chemical evolution of the Nd-Fe-B magnets during electroleaching reveals the electrochemical stimuli and rate of dissolution depends on microstructural complexities of the Nd-Fe-B magnet. The concomitant electroplating process leads to Nd-Pr based alloy which can be used as raw metallic alloy for manufacturing new permanent magnet and other devices. Our study demonstrates a scalable separation and refining methodology, based on widely available organic electrolyte system and without any consumptive chemical use, for selective lanthanide recovery from waste magnets.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Double X/Peanut structures in barred galaxies – insights from an N -body simulation
ABSTRACT Boxy, peanut-, or X-shaped ‘bulges’ are observed in a large fraction of barred galaxies viewed in, or close to, edge-on projection, as well as in the Milky Way. They are the product of dynamical instabilities occurring in stellar bars, which cause the latter to buckle and thicken vertically. Recent studies have found nearby galaxies that harbour two such features arising at different radial scales, in a nested configuration. In this paper, we explore the formation of such double peanuts, using a collisionless N-body simulation of a pure disc evolving in isolation within a live dark matter halo, which we analyse in a completely analogous way to observations of real galaxies. In the simulation, we find a stable double configuration consisting of two X/peanut structures associated with the same galactic bar – rotating with the same pattern speed – but with different morphology, formation time, and evolution. The inner, conventional peanut-shaped structure forms early via the buckling of the bar, and experiences little evolution once it stabilizes. This feature is consistent in terms of size, strength, and morphology, with peanut structures observed in nearby galaxies. The outer structure, however, displays a strong X, or ‘bow-tie’, morphology. It forms just after the inner peanut, and gradually extends in time (within 1–1.5 Gyr) to almost the end of the bar, a radial scale where ansae occur. We conclude that, although both structures form, and are dynamically coupled to, the same bar, they are supported by inherently different mechanisms.
Ciambur, Bogdan C.↗
Kinetics and evolution of solid-state metal dealloying in thin films with multimodal analysis
Thin-film solid-state metal dealloying (thin-film SSMD) is an emerging technique that uses self-organization to design nanostructured thin films. The resulting 3D bicontinuous nanostructures are promising for a wide range of applications, such as catalysis and energy storage. In this work, we prepared thin films by SSMD using Ti-Cu as the parent alloy and Mg as the solvent. Using a multimodal approach, we combined synchrotron X-ray spectroscopy, diffraction, and high-resolution electron-based spectroscopy and imaging to study their morphological, structural, and chemical evolution. The processing-structure relationship was analyzed as a function of parent alloy composition and dealloying temperature and time. Morphological transitions from globular, to lamellar, to bicontinuous structures, in conjunction with a ligament size evolution, were identified as functions of the parent alloy composition. The dealloying rate increased with increasing concentration of interdiffusing elements (dissolving component) in the parent alloy. The parting limit, a dealloying compositional threshold, was systematically analyzed and determined to be 30%–40%. The order of crystalline phase formation is CuMg 2 , Cu 2 Mg, and Ti; the Ti phase first shows self-reorganization during dealloying, separate from the crystallization process. The coarsening in thin-film SSMD was identified and not entirely self-similar; in addition to the increase of ligament size over time, the formation of larger globular ligaments were also observed. This work furthers our fundamental understanding of thin-film SSMD and nanostructured thin-film design, where the thermodynamic and kinetic effects differ from the bulk counterparts. The fact that dealloying and diffusion outpaces the crystallization and new phase formation also offers opportunities to utilize thin-film SSMD in certain alloy systems in which deleterious intermetallic phases need to be suppressed, that may not be possible in the bulk geometry.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Charge generation mechanism tuned via film morphology in small molecule bulk-heterojunction photovoltaic materials
Small organic molecules have emerged as promising component materials for organic photovoltaic devices. Compared to most conjugated polymers for the same application, small molecules have unique morphologies that promote electronic processes relevant to organic solar cell (OSC) function that can be significantly different from those of conjugated polymeric materials. Here we investigate constituent loading-dependent effects on OSC morphology and function using the classical fullerene acceptor, PC 61 BM, in a heterojunction blend with the small molecule donor, NDT (thiophene-capped diketopyrrolopyrrole naphthodithiophene). The evolution of active layer morphology as well as exciton speciation and dynamics as a function of the PC 61 BM content are examined in combined structural studies using GIWAXS and spectroscopic studies using transient absorption spectroscopy. We observe evidence for three types of coexisting excitons and details of the interplay between them determines the yield of charge separated states that afford sustained device efficiency.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Decoding Gas Evolution Pathways and Interfacial Chemistry in Layered Oxide Cathodes for Safer Sodium‐Ion Batteries
Sodium-ion batteries (SIBs) are attractive for the low cost and abundance of sodium. Yet, gas evolution—a critical challenge in SIBs—remains underexplored. Here, online electrochemical mass spectrometry is used to probe gas evolution in layered oxide cathodes with various compositions, cutoff voltages, dopants, and particle morphologies. Compared to LiNiO 2 (LNO), NaNiO 2 releases more gas, even at lower states of charge, due to the higher covalency of Ni─O bond caused by the more ionic Na─O bond through the inductive effect. Among Co, Mn, Al, and Mg, Mn and Mg doping suppress gas release most effectively by enhancing the metal-oxygen bond strength. NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM) cathodes synthesized via coprecipitation (CP-NFM) and solid-state routes exhibit distinct particle morphologies; CP-NFM exhibits more gas evolution, yet secondary particle morphology helps reduce it through differential cathode-electrolyte reactivity between inner and outer primary particles. Among Li, Ti, Mg, and Cu doping in NFM, Li has the largest effect, reducing gas levels comparable to LNO. Nuclear magnetic resonance and X-ray photoelectron spectroscopies reveal that electrolyte solvent decomposition mainly produces organic-rich cathode-electrolyte interphase (CEI) rather than soluble species. NaPF 6 salt further exacerbates cathode-electrolyte reactions, forming surface Na 2 O species. The findings provide actionable guidance for designing safer, durable SIBs.
25 ENERGY STORAGE↗
X-Ray Microtomography Measurements of Coevolving Particle Size and Shape
This study measures simultaneous changes in particle size and shape during grain crushing and proposes quantitative metrics to track their coevolving statistical distribution. Idealized granular materials with widely different initial particle shapes (i.e., spheres, quasi-ellipsoids, plates, and rods) are compressed oedometrically at vertical stress levels sufficient to induce particle breakage. X-ray microtomography and digital image analysis are then used to track changes in particle-scale characteristics. The observations indicate that more irregular particles tend to exhibit a higher degree of breakage compared to more spherical grains subjected to an equivalent stress level. Despite these differences, the measurements also indicate that all the tested particle sets approach a common attractor (expressed in terms of aspect ratio, flatness, and elongation), regardless of their initial morphology. A new shape evolution index is proposed to quantify such trends. With this new metric, it is shown that in all the tested materials, the particle shape evolves faster than size, especially for the more regular morphologies, thus implying that the shape tends to reach its attractor point before the grading reaches its ultimate particle size distribution. Furthermore, this finding underpins an ultimate stage of crushing-driven compression that occurs with particle size reduction but minimal shape changes (i.e., self-replicating shapes due to fractures).
Oedometric compression↗
An experimental and computational study of thin-layer Rayleigh–Taylor instability development during deceleration with and without an externally applied magnetic field
The importance of mitigating the Rayleigh–Taylor instability (RTI) in inertial confinement fusion (ICF) is critical to successfully achieve high gain fusion yield. Consequently, understanding the seed mechanisms of RTI and the potential evolution of RTI in ICF relevant conditions is crucial. Single feature perturbations consistently demonstrate non-linear RTI evolution, for which an experimental platform on OMEGA-EP is developed. Manufacturing defects introduced into the target design require exploration of unanticipated changes to RTI development and an identification of targets that will still render quantifiable physics results. Consequently, it is presented that the inherent 3D nature of experimental targets necessitates 3D modeling for accurate design work and predictive modeling of experimental targets, especially when high resolution imaging diagnostics, like Fresnel Zone Plates, are utilized. A study of the morphology of the RTI evolution due to changing initial conditions and the presence of an externally applied magnetic field are also explored. Experimental data show thin-layer RTI morphology comparable to resistive magneto hydrodynamic 3D results. A discussion on the impacts of an externally applied magnetic field makes the case for continued efforts to observe a magnetic field's impact on RTI morphology.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
The Dynamic of Complex Two-Phase Mixtures During Coarsening: From Dendritic to Bicontinuous Mixtures
Dendrites are tree-like crystals that frequently form during the solidification of castings. In systems with nearly isotropic interfacial energy, these dendrites possess secondary and sometimes even tertiary arms, and lead to morphologically complex two-phase mixtures. Dealloying, in which one component is selectively leached, leads to nanoporous structures that have proven useful for many technological applications. These bicontinuous two-phase mixtures are topologically and morphologically complex with spatially varying mean and Gaussian curvatures. The evolution of these structures during coarsening is of considerable technological importance since the morphology of the dendrites and nanoporous structure sets the properties of the resulting material. During coarsening, the total surface area per volume of the mixture decreases, thus resulting in an increase in the size-scale of the two-phase mixture. The evolution of interfacial morphology of these interconnected two-phase mixtures is being studied using large-scale computer simulations. The simulations are used to develop a theory of coarsening in these systems that will elucidate the impact of the complicated morphology found in dendritic and nanoporous systems on the coarsening process. The experiments employ four-dimensional X-ray microtomography, which enables the morphology of the two-phase mixture to be followed in three dimensions and time (an additional dimension). The experiments also serve as a test of simulations and theory of the coarsening process, as well as to provide initial conditions for the simulations. Through these experiments and theory, we aim to develop a comprehensive description of coarsening in these complex and technologically important two-phase mixtures.
36 MATERIALS SCIENCE↗
Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells
Numerous previous reports on the sequential deposition (SD) technique have demonstrated that this approach can achieve a p–i–n active layer architecture with an ideal vertical composition gradient, which is one of the critical factors that can influence the physical processes that determine the photovoltaic performance of organic solar cells. Herein, a commonly used photovoltaic system comprised of PM6 as a donor and Y6 as an acceptor is investigated with respect to sequential blade–processing deposition to comprehensively explore the morphology characteristics as a function of baseplate temperature. A systematic study of the temperature–dependent blend morphology elucidates the SD–processed configuration merits and device physics behind temperature–controlled degree of vertical composition gradient, and constructs the temperature–microstructure–property relationship for the corresponding photovoltaic parameters. The result shows, as the temperature increases, the morphology of the active layer has undergone a distinct evolution from the pseudo–bulk heterojunction to a pseudo–planar heterojunction and then to a pseudo–planar bilayer, leading to a non–monotonic correlation between baseplate temperature and device performance. Further, this investigation not only reveals the importance of precisely controlling baseplate temperature for gaining vertical morphology control, but also provides a path toward rational optimization of device performance in the lab–to–fab transition.
14 SOLAR ENERGY↗
Analyzing the cosmic web environment in the vicinity of grand-design and flocculent spirals with local geometric index
We explore the environment of a combined set of 367 grand-design and 619 flocculent spiral galaxies. We introduce a novel estimator called the local geometric index to quantify the morphology of the local environment of these 986 spirals. The local geometric index allows us to classify the environment of galaxies into voids, sheets, filaments, and clusters. We find that grand-designs are mostly located in dense environments like clusters and filaments (∼ 78%), whereas the fraction of the flocculents lying in sparse environments like voids and sheets is significantly higher (> 10%) than that of the grand-designs. A p-value < 10 -3 from a Kolmogorov-Smirnov test indicates that our results are statistically significant at 99.9% confidence level. Further, we note that dense environments with large tidal flows are dominated by the grand-designs. On the other hand, low-density environments such as sheets and voids favor the growth of flocculents.
79 ASTRONOMY AND ASTROPHYSICS↗
Unveiling the Emergent Traits of Chiral Spin Textures in Magnetic Multilayers
Abstract Magnetic skyrmions are topologically wound nanoscale textures of spins whose ambient stability and electrical manipulation in multilayer films have led to an explosion of research activities. While past efforts focused predominantly on isolated skyrmions, recently ensembles of chiral spin textures, consisting of skyrmions and magnetic stripes, are shown to possess rich interactions with potential for device applications. However, several fundamental aspects of chiral spin texture phenomenology remain to be elucidated, including their domain wall (DW) structure, thermodynamic stability, and morphological transitions. Here the evolution of these textural characteristics are unveiled on a tunable multilayer platform—wherein chiral interactions governing spin texture energetics can be widely varied—using a combination of full‐field electron and soft X‐ray microscopies with numerical simulations. With increasing chiral interactions, the emergence of Néel helicity, followed by a marked reduction in domain compressibility, and finally a transformation in the skyrmion formation mechanism are demonstrated. Together with an analytical model, these experiments establish a comprehensive microscopic framework for investigating and tailoring chiral spin texture character in multilayer films.
36 MATERIALS SCIENCE↗
A Gaussian process autoregressive model capturing microstructure evolution paths in a Ni–Mo–Nb alloy
Additive manufacturing is increasingly being employed to produce components of complex geometries in structural alloys because of the expected energy savings associated with the near-net-shape capability and the ability to build in novel internal features that are not possible with many conventional manufacturing approaches. However, because of the extreme thermal conditions encountered, the non-equilibrium microstructures produced during powder bed-based additive manufacturing processes must be subjected to custom post-heat treatment processes to recover the target mechanical properties. Phase-field models and simulation techniques have matured to a state where the microstructure evolution paths, and the morphologies of the resulting precipitate phases can be predicted reasonably accurately, considering alloy-specific thermodynamic and kinetic aspects of the nucleation and growth processes. However, phase-field simulations are computationally intensive, which precludes the ability to apply the simulations directly to the length scale of the entire component. Therefore, it is highly desirable to develop low-computational-cost surrogate models that effectively capture the physics at the microstructural length scale, while facilitating the design of optimized processing conditions resulting in location-specific targeted microstructures at the component scale. The work presented here demonstrates the application of the materials knowledge system framework to develop a surrogate model that effectively captures the microstructural path during annealing of a Ni–Mo–Nb alloy containing different Mo and Nb compositions known to segregate during solidification under additive manufacturing conditions. Specifically, the surrogate model built in this work is based on a Gaussian process autoregressive model informed by statistical representation of simulated microstructures using two-point correlations and dimensionality reduction through principal component analysis. In conclusion, this surrogate model is shown to capture the bifurcation of the microstructural path during precipitation, which yields a microstructure dominated by the $\gamma^{\prime\prime}$ phase at high Nb concentrations and the $\delta$ phase at low Nb concentrations.
36 MATERIALS SCIENCE↗