Search NASA⌕ Search

SEARCH · Search NASA

Results for “Natural disturbance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Nonlinear disturbances in a hypersonic laminar boundary layer

Three separate but similar experiments on the growth of naturally-occurring instability waves in the laminar boundary-layers on sharp cones at hypersonic Mach numbers have been conducted. Each provided clear evidence that the theoretically-predicted second mode of instability was responsible for high-amplitude wave trains observed to prevail upstream of boundary-layer transition to turbulence. However, each also seemed to reveal the presence of an additional instability not accounted for by the linear theory. Here, examination is made of the tape-recorded hot-wire anemometer signals of one experiment on a sharp cone at Mach 8 for evidence of nonlinearity, the finding of which would explain the presence of the additional mode as a consequence of harmonic generation. Several approaches for identification of the residual effects of nonlinearity are described and utilized. Also, a simplified model describing certain fluctuation characteristics has been developed. Altogether, the evidence of nonlinear wave development is found to be strong. Quantitative comparisons of linear theory to experiments must be made with caution when nonlinearity is present in the experiment.

Kimmel, Roger L.↗
NASA NTRS2023

Two Decades of Land Cover Change and Forest Fragmentation in Liberia: Consequences for the Contribution of Nature to People

The Guinean forests of West Africa have been identified as a global biodiversity hotspot due to its exceptional concentrations of endemic species and exceptional loss of habitats. The majority of what remains of the Guinean forests lies within Liberia, a country whose share of total wealth is nearly equally distributed into human and natural capital. The Liberian government seeks a more inclusive development agenda that forges a path for improved human capital while sustainably managing its natural capital wealth, which requires consistent data on land cover change and forest disturbance over time. To address this need, Landsat data were used to map and quantify land cover change and forest fragmentation in Liberia between 2000 and 2018. In addition, LiDAR data from the Global Ecosystem Dynamics Investigation (GEDI) mission were applied to assess the integrity of forest remnants. Between 2000 and 2018, only 1% of all forest cover classes (i.e., dense/primary, open/secondary and sparse/degraded) were converted into non-forest classes, with the most observed change being between these three forest classes. During the study period, 27% of the dense/primary forest class transitioned to either the open/secondary or sparse/degraded canopy classes through consistent fragmentation along the edges of the last large remaining blocks of dense/primary forest located in the north-west and south-east of Liberia and more than 14% of dense/primary forest areas identified in previous studies as “essential natural capital” for either biodiversity, forest carbon storage or provision of freshwater ecosystem services were degraded. The 2018 GEDI-based measurements show that the overall average height of dense/primary forest decreases by 24% and 48%, and canopy closure decreases by 33% and 59%, when transitioned to the open/secondary and sparse/degraded classes, respectively. The information derived from this analysis will be critical for informing the development of new policies and actions, leading to more sustainable forest management in Liberia.

Celio De Sousa↗
NASA NTRS2014

Flight Tests of a Supersonic Natural Laminar Flow Airfoil

A flight test campaign of a supersonic natural laminar flow airfoil has been recently completed. The test surface was an 80-inch (203 cm) chord and 40-inch (102 cm) span article mounted on the centerline store location of an F-15B airplane. The wing was designed with a leading edge sweep of effectively 0 deg to minimize boundary layer crossflow. The test article surface was coated with an insulating material to avoid significant heat transfer to and from the test article structure to maintain a quasi-adiabatic wall. An aircraft-mounted infrared camera system was used to determine boundary layer transition and the extent of laminar flow. The tests were flown up to Mach 2.0 and chord Reynolds numbers in excess of 30 million. The objectives of the tests were to determine the extent of laminar flow at high Reynolds numbers and to determine the sensitivity of the flow to disturbances. Both discrete (trip dots) and 2-D disturbances (forward-facing steps) were tested. A series of oblique shocks, of yet unknown origin, appeared on the surface, which generated sufficient crossflow to affect transition. Despite the unwanted crossflow, the airfoil performed well. The results indicate the sensitivity of the flow to the disturbances, which can translate into manufacturing tolerances, were similar to that of subsonic natural laminar flow wings.

Frederick, M. A.↗
DOE OSTI2025

Radial burnup characteristics of spent fuel pellets by zirconium analysis

Resonance ionization mass spectrometry is a powerful tool for in-situ measurements of elemental ratios in micrometer-sized spent fuel samples. By measuring the concentration of the fission product Zr we provide a framework for determining fuel burnup while simultaneously considering the 239 Pu fission fraction. Here, the analyzed spent fuel samples were taken from different fuels and distances from the fuel pellets’ edge. Results show a burnup enhancement at the edge of a fuel pellet of 180–220% compared to the center of the pellet. By comparing the concentration of the anthropogenic 93 Zr to the naturally occurring Zr isotopes, any influence of non-fissiogenic Zr or disturbing neutron capture reactions can be ruled out. This established 93 Zr as a new tool to measure fuel burnup.

Burnup↗
DOE OSTI2024

Forest Carbon Storage in the Western United States: Distribution, Drivers, and Trends

Abstract Forests are a large carbon sink and could serve as natural climate solutions that help moderate future warming. Thus, establishing forest carbon baselines is essential for tracking climate‐mitigation targets. Western US forests are natural climate solution hotspots but are profoundly threatened by drought and altered disturbance regimes. How these factors shape spatial patterns of carbon storage and carbon change over time is poorly resolved. Here, we estimate live and dead forest carbon density in 19 forested western US ecoregions with national inventory data (2005–2019) to determine: (a) current carbon distributions, (b) underpinning drivers, and (c) recent trends. Potential drivers of current carbon included harvest, wildfire, insect and disease, topography, and climate. Using random forests, we evaluated driver importance and relationships with current live and dead carbon within ecoregions. We assessed trends using linear models. Pacific Northwest (PNW) and Southwest (SW) ecoregions were most and least carbon dense, respectively. Climate was an important carbon driver in the SW and Lower Rockies. Fire reduced live and increased dead carbon, and was most important in the Upper Rockies and California. No ecoregion was unaffected by fire. Harvest and private ownership reduced carbon, particularly in the PNW. Since 2005, live carbon declined across much of the western US, likely from drought and fire. Carbon has increased in PNW ecoregions, likely recovering from past harvest, but recent record fire years may alter trajectories. Our results provide insight into western US forest carbon function and future vulnerabilities, which is vital for effective climate change mitigation strategies.

Environmental Sciences & Ecology↗
DOE OSTI2022

AI-Based Protective Relays for Electric Grid Resiliency

The protection systems (circuit breakers, relays, reclosers, and fuses) of the electric grid are the primary component responding to resilience events, ranging from common storms to extreme events. The protective equipment must detect and operate very quickly, generally <0.25 seconds, to remove faults in the system before the system goes unstable or additional equipment is damaged. The burden on protection systems is increasing as the complexity of the grid increases; renewable energy resources, particularly inverter-based resources (IBR) and increasing electrification all contribute to a more complex grid landscape for protection devices. In addition, there are increasing threats from natural disasters, aging infrastructure, and manmade attacks that can cause faults and disturbances in the electric grid. The challenge for the application of AI into power system protection is that events are rare and unpredictable. In order to improve the resiliency of the electric grid, AI has to be able to learn from very little data. During an extreme disaster, it may not be important that the perfect, most optimal action is taken, but AI must be guaranteed to always respond by moving the grid toward a more stable state during unseen events.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1980

Spinel cataclasites in 15445 and 72435 - Petrology and criteria for equilibrium

The problem of establishing the existence of equilibrium among the coexisting phases in the rock is addressed by presenting petrographic and mineral chemistry data on a new spinel cataclasite from 15445 (clast H) and data more extensive than those previously available on two clasts in 72435. Criteria useful in reconstructing the original petrology of these and other spinel cataclasites are analyzed by considering equilibrium among the different phases, that is, the mono- or polymict nature of these cataclasized samples. Finally, the role of impact processes in disturbing the equilibria is discussed.

Baker, M. B.↗
NASA NTRS1990

Turbulence in unsteady flow at high frequencies

Turbulent flows subjected to oscillations of the mean flow were simulated using a large-eddy simulation computer code for flow in a channel. The objective of the simulations was to provide better understanding of the effects of time-dependent disturbances on the turbulence of a boundary layer and of the underlying physical phenomena regarding the basic interaction between the turbulence and external disturbances. The results confirmed that turbulence is sensitive to certain ranges of frequencies of disturbances. However, no direct connection was found between the frequency of imposed disturbances and the characteristic 'burst' frequency of turbulence. New insight into the nature of turbulence at high frequencies was found. Viscous phenomena near solid walls were found to be the dominant influence for high-frequency perturbations.

Kuhn, Gary D.↗
NASA NTRS1991

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharmonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. David↗
NASA NTRS1991

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharamonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. D.↗
NASA NTRS1988

Experimental facilities for system identification

Future space vehicles will differ significantly from the space systems used in the past. The planned spacecraft configurations will include extremely large structures, up to 100-200 meters across. Because the allowable launch weights are limited, the large space structures must be constructed of lightweight, flexible elements, and active control of the shape and attitude of the spacecraft will be required. The behavior of large structures is characterized by many closely spaced natural modes, and some applications may also include large on-board disturbances. Consequently, the control and disturbance forces will invariably spill over to a large number of modes. Structural identification will be necessary for precision pointing and shape controls to be effective. An accurate mathematical model of a structure is essential for the success of precision control system design. However, the currently available analytical modeling codes, such as NASTRAN, are incapable of producing numerical models of the required precision. The favored approach for model determination is to refine the mathematical model based on experiments in the orbital environment. It is to this effect that we must develop techniques to reliably generate the accurate models required for future missions, and the arena in which these methods will be developed and proved is through ground-based system identification experiments and demonstrations. The Air Force Astronautics Laboratory (AFAL) has expanded the on-site ground-test facilities in recent years, and additional sites are planned for the immediate future. We shall review the plans for laboratory growth at AFAL with regard to the type of experiments proposed and the availability of the new facilities.

Das, Alok↗
NASA NTRS2023

Leaf Functional Traits in Relation to Species Composition in an Arctic–Alpine Tundra Grassland

The relict arctic–alpine tundra provides a natural laboratory to study the potential impacts of climate change and anthropogenic disturbance on tundra vegetation. The Nardus stricta-dominated relict tundra grasslands in the Krkonoše Mountains have experienced shifting species dynamics over the past few decades. Changes in species cover of the four competing grasses—Nardus stricta, Calamagrostis villosa, Molinia caerulea, and Deschampsia cespitosa—were successfully detected using orthophotos. Leaf functional traits (anatomy/morphology, element accumulation, leaf pigments, and phenolic compound profiles), were examined in combination with in situ chlorophyll fluorescence in order to shed light on their respective spatial expansions and retreats. Our results suggest a diverse phenolic profile in combination with early leaf expansion and pigment accumulation has aided the expansion of C. villosa, while microhabitats may drive the expansion and decline of D. cespitosa in different areas of the grassland. N. stricta—the dominant species—is retreating, while M. caerulea did not demonstrate significant changes in territory between 2012 and 2018. We propose that the seasonal dynamics of pigment accumulation and canopy formation are important factors when assessing potential “spreader” species and recommend that phenology be taken into account when monitoring grass species using remote sensing.

Lena Hunt↗
NASA NTRS2015

Flight Tests of a Supersonic Natural Laminar Flow Airfoil

A flight-test campaign of a supersonic natural laminar flow airfoil has been recently completed. The test surface was an 80-inch (203 cm) chord and 40-inch (102 cm) span article mounted on the centerline store location of an F-15B airplane (McDonnell Douglas Corporation, now The Boeing Company, Chicago, Illinois). The test article was designed with a leading edge sweep of effectively 0 deg to minimize boundary layer crossflow. The test article surface was coated with an insulating material to avoid significant heat transfer to and from the test article structure to maintain a quasi-adiabatic wall. An aircraft-mounted infrared camera system was used to determine boundary layer transition and the extent of laminar flow. The tests were flown up to Mach 2.0 and chord Reynolds numbers in excess of 30 million. The objectives of the tests were to determine the extent of laminar flow at high Reynolds numbers and to determine the sensitivity of the flow to disturbances. Both discrete (trip dots) and 2-D disturbances (forward-facing steps) were tested. A series of oblique shocks, of yet unknown origin, appeared on the surface, which generated sufficient crossflow to affect transition. Despite the unwanted crossflow, the airfoil performed well. The results indicate the sensitivity of the flow to the disturbances, which can translate into manufacturing tolerances, were similar to that of subsonic natural laminar flow wings.

supersonic boundary layer↗
NASA NTRS2002

A methodology for modeling the mechanical interaction between a reaction wheel and a flexible structure

This paper presents a modeling methodology used to predict the performance of a flexible structure, such as a space telescope, in the presence of an on-board vibrational disturbance source, such as a reaction wheel assembly (RWA). Both decoupled and coupled analysis methods are presented. The decoupled method relies on blocked RWA disturbances, measured with the RWA hardmounted to a rigid surface. The coupled method corrects the blocked RWA disturbance boundary conditions using "force filters," which depend on estimates of the interface accelerances of the RWA and space-craft. Both methods were validated on the Micro-Precision Interferometer testbed at the Jet Propulsion Laboratory. Experimental results are encouraging, indicating that both methods provide sufficient accuracy compared to measured values; however, the coupled method provides the best results when the gyroscopic nature of the spinning RWA is captured in the RWA accelerance model. Additionally, the RWA disturbance cross spectral density terms are found to be influential.

vibration↗
NASA NTRS2011

Computational Analysis of the G-III Laminar Flow Glove

Under NASA's Environmentally Responsible Aviation Project, flight experiments are planned with the primary objective of demonstrating the Discrete Roughness Elements (DRE) technology for passive laminar flow control at chord Reynolds numbers relevant to transport aircraft. In this paper, we present a preliminary computational assessment of the Gulfstream-III (G-III) aircraft wing-glove designed to attain natural laminar flow for the leading-edge sweep angle of 34.6deg. Analysis for a flight Mach number of 0.75 shows that it should be possible to achieve natural laminar flow for twice the transition Reynolds number ever achieved at this sweep angle. However, the wing-glove needs to be redesigned to effectively demonstrate passive laminar flow control using DREs. As a by-product of the computational assessment, effect of surface curvature on stationary crossflow disturbances is found to be strongly stabilizing for the current design, and it is suggested that convex surface curvature could be used as a control parameter for natural laminar flow design, provided transition occurs via stationary crossflow disturbances.

Malik, Mujeeb R.↗
NASA NTRS1979

On the question of instabilities upstream of cylindrical bodies

In an attempt to understand the unsteady vortical phenomena in perturbed stagnation regions of cylindrical bodies, a critical review of the theoretical and experimental evidence was made. Current theory is revealed to be incomplete, incorrect, or inapplicable to the phenomena observed experimentally. The formalistic approach via the principle of exchange of instabilities should most likely be replaced by a forced-disturbance approach. Also, many false conclusions were reached by ignoring that treatment of the base and perturbed flows in Hiemenz coordinate eta is asymptotic in nature. Almost surely the techniques of matched asymptotic expansions are expected to be used to capture correctly the diffusive and vorticity amplifying processes of the disturbances regarding the mean-flow boundary layer and outer potential field as eta and y/diameter approach infinity. The serious uncertainties in the experiments are discussed in detail.

Morkovin, M. V.↗
NASA NTRS1973

Magnetic storm characteristics of the thermosphere.

Energy and diffusive mass transport associated with the thermospheric circulation are considered in a self-consistent, though mathematically relatively simple, form to describe in a three-dimensional two-constituent model magnetic storm characteristics in composition (N2, O, and He), temperature, and mass-density. It is shown that during disturbed conditions the latitudinal variations of composition and gas temperature reflect the local nature of the magnetic storm heat input assumed to be primarily confined to the auroral zones. Thereby gas temperature and N2 increase, He decreases, and O remains constant through the auroral zones at exospheric heights (due to the superposition of temperature and diffusion effects) in agreement with Ogo 6 mass spectrometer measurements. In contrast, the magnetic storm response in the total mass density is characterized by a strong worldwide component and a relatively insignificant increase toward the poles.

Mayr, H. G.↗