Search NASASearch

SEARCH · Search NASA

Results for “Optical Microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Mineralogy and petrology of chondrules and inclusions in the Mokoia CV3 chondrite

The inclusions and chondrules of the Mokoia CV3 chondrite are studied systematically and compared with those in the Allende meteorite. Five polished thin sections of Mokoia were examined by optical microscopy, backscattered scanning electron microscopy, and electronprobe microanalysis, and objects greater than about 100 microns in apparent diameter were measured and classified petrographically. Three major types of olivine chondrules are distinguished: igneous chondrules, which evidently crystallized from droplets of silicate melt; recrystallized chondrules, apparently metamorphosed at relatively high temperatures; and accretional aggregates, which are probably fragments of igneous chondrules. Refractory inclusions in Mokoia are generally similar to those found in Allende, although Mokoia inclusions include phyllosilicates rather than feldspathoids and melilite-rich Ca, Al-rich inclusions (CAIs) are more abundant in Allende. The small, fine-grained CAIs, which are more abundant than coarse-grained CAIs in both meteorites, are observed to represent aggregates of three distinct constituents: concentric objects, chaotic material and inclusion matrix. It is concluded that most of the CAIs probably formed during metamorphism, partial melting, and incomplete distillation of primitive dust aggregates heated in the solar nebula.

Cohen, R. E.

A three-dimensional study of metal grains in equilibrated, ordinary chondrites

Metal particles in Guarena (H6), Colby (L6) and St. Severin (LL6) were studied by optical microscopy and by electron microprobe analysis. Observations from successive polished sections through the metal particles show that kamacite and taenite grains, which often appear to be isolated particles, are connected directly or by intervening sulfides. Also tetrataenite rims are widest when adjacent to sulfide or kamacite. These observations indicate that transfer of Ni during cooling when kamacite-taenite phase growth takes place does not occur through the silicate phases but proceeds through metal and sulfide phases or along grain boundaries. By utilizing the central Ni content of taenite grains from successive sections, metallographic cooling rates were determined more precisely than by using one arbitrary section. Cooling rates determined in this manner for Guarena, Colby, and St. Severin are 4.3 K, 4.0 K, and 1.0 K per million years, respectively.

Willis, J.

Interaction between cast silicon properties and solar cell performance

Three types of cast silicon, Silso, HEM (Heat-Exchanger Method) and UCP (Ubiquitous Crystallization Process) were studied for their use as solar cells. Optical microscopy after etching revealed a high density of uniform dislocations (approaching 1,000,000/sq cm), lines of dislocations indicating stress during crystal growth, and precipitates, some of which generate dislocations. Solar cells were fabricated by three processes. Results of solar cell processing revealed that these materials produce cells of lower efficiency than Czochralski control cells, and that the efficiencies of the three materials were quite close. Diffusion length and spectral response data are shown. Certain structural features are correlated with solar cell efficiency, diffusion length, and spectral response. Electron-beam induced current (EBIC) and light spot scanning are used to back up other measurements.

Hyland, S.

Kinetics of crystal nucleation and growth in Pd(40)Ni(40)P(20) glass

Samples of Pd(40)Ni(40)P(20) glass, produced by cooling the melt at 1 or 800 K/s, are heated in a differential scanning calorimeter to determine the crystallization kinetics. Optical microscopy shows that eutectic crystallization proceeds both by growth from the surface of the samples and by the growth of spherical regions around preexisting nuclei in the interior. A modified Kissinger (1957) analysis is used to obtain the activation energy for crystal growth (3.49 eV). The steady state homogeneous nucleation frequency at 590 K is about 10 million/cu m per sec. This is estimated to be the maximum nucleation frequency: it is too low to account for the observed population of quenched-in nuclei, which are therefore presumed to be heterogeneous. The major practical obstacle to glass formation in this system is heterogeneous nucleation.

Drehman, A. J.

Survey of probable micrometer-sized Earth-orbital debris fragments in the NASA-JSC cosmic dust sample collection

A program to collect extraterrestrial dust samples from the stratosphere using impactors mounted on NASA U-2 and WB-57F aircraft is discussed. Sample collection, preparation, and analysis techniques are described and the particle types found are reviewed. Preliminary examination of the particles indicates that they represent not only extraterrestrial material, but some fraction of terrestrial contamination from both natural and manmade sources. This examination involves a combination of optical microscopy, scanning electron microscopy (SEM) and qualitative bulk elemental analysis using an energy-dispersive X-ray spectrometer (EDS) to characterize each particle. The cosmic dust collection contains samples of at least three classes of material that may present some hazard to extended spacecraft operations in near-Earth orbit: (1) micrometeorites/cosmic dust, (2) aluminum oxide spheres, and (3) alloy spherules and fragments.

Clanton, U. S.

Hot stage and sample cell design for the solidification of transparent materials with and without forced convection

A temperature gradient stage design for optical microscopy is described. Exceptional thermal stability is the major feature. The stage is used to study crystal growth phenomena occurring at the solid-liquid interface. The apparatus is designed to use transparent organic solutions as models for the study of metal-like solidification. The stage provides a controlled thermal environment for unidirectional solidification of low melting temperature materials. Freezing rate is regulated by mechanically sliding in the stage a thin glass cell containing the materials being studied. Two cell assemblies are described. One type is used for convection-free and the other for controlled forced convection studies of the solidification interface.

Kaukler, W. F.

Metallurgical and mechanical phenomena due to rubbing of titanium against sintered powder Nichrome

Metallurgical and mechanical changes occurring during high-speed rubbing of Ti-6Al-4V blade specimens against an abradable Nichrome aircraft engine seal material were studied using optical microscopy, electron microscopy, and microhardness techniques. Evidence of temperatures above the beta transus of Ti-6Al-4V (1000 C) and of thermal hardening was found on blade tips that exhibited undesirable abrading characteristics resulting in high forces of interaction, high temperatures, and smearing. The material within the layer of the corresponding seals was found to be work-hardened to a depth of about 0.1 mm and showed evidence of densification extending to a depth of about 0.5 mm below the rubbed surface. Wear particles produced by rub interactions that generated cleanly abraded seal surfaces were found to be several times larger than those produced during interactions which showed evidence of surface smearing and seal densification.

Zenas, R.

Classification of eight ordinary chondrites from Texas

Based on optical microscopy and electron microprobe analyses, eight previously undescribed or poorly known chondrites were classified into compositional groups, petrologic types, and degree of shock alteration. These chondrites are: Leander, L4b; Nazareth(a), L6d; La Villa, H4b; Mereta, H4c; Gail, H4d; Shafter Lake, H5a; Uvalde, H5d; and Howe, H5d.

Ehlmann, A. J.

Effects of seawater and deionized water at 0 to 80 deg C on the flexural properties of a glass/epoxy composite

The effect on the flexural properties of a glass/epoxy composite of immersion in deionized water or seawater at 0, 25, and 80 C for 451 hr was examined. The percent weight gain at 0 and 25 C was low (0.06 to 0.17 percent) and there was no significant change in the flexural properties for these environmental conditions. At 80 C there was a decrease in the flexural strength of 17 and 20 percent in seawater and deionized water, respectively. This is a comparison to control samples exposed to 80 C heat alone. These decreases were found to be nearly reversible once the samples were dried. Optical microscopy did not reveal cracking of the matrix. The flexural modulus was essentially unaffected by exposure to deionized water and seawater at 80 C.

Penn, B. G.

Adequacy of surface analytical tools for studying the tribology of ceramics

Surface analytical tools are very beneficial in tribological studies of ceramics. Traditional methods of optical microscopy, XRD, XRF, and SEM should be combined with newer surface sensitive techniques especially AES and XPS. ISS and SIMS can also be useful in providing additional compositon details. Tunneling microscopy and electron energy loss spectroscopy are less known techniques that may also prove useful.

Sliney, H. E.

Defect characterization of silicon dendritic web ribbons

Progress made in the study of defect characterization of silicon dendritic web ribbon is presented. Chemical etching is used combined with optical microscopy, as well as the electron beam induced current (EBIC) technique. Thermal annealing effect on carrier lifetime is examined.

Cheng, L. J.

Thermal and sputtered aluminum oxide coatings for high temperature electrical insulation

Aluminum oxide coatings have been investigated as electrically insulating layers for mounting thin film Pt-Pt/Rh thermocouples on gas turbine blade and vane alloys (MAR M200 + Hf and MAR M509). Thermal oxides were grown directly onto NiCoCrAlY and FeCrAlY coatings on these alloys at temperature between 1300 and 1400 K in oxygen partial pressures 10 to the -7th to 2 x 10 to the 4th Pa. Although these thermal oxides exhibited good adherence, analytical characterizations using electron and optical microscopy, as well as X-ray photoelectron spectroscopy showed that they had defects and impurities which limited their insulating ability. The insulating quality of the coating was greatly improved however by reactively sputtering an aluminum oxide film over the thermal oxide. Results are presented on the electrical performance of the 2-5 micron thick composite layers for temperatures up to 1300 K.

Kreider, K. G.

Fractography of unidirectional graphite-epoxy as a function of moisture, temperature and specimen quality

Optical microscopy and SEM have been used to examine the tensile failure surfaces of (0-deg)8 T300/5208 graphite-epoxy specimens, and fractography is employed to determine how moisture content and temperature, together with specimen preparation, affect failure modes. A low energy failure morphology is noted in defective specimens; specimens made from nondefective prepregs appeared to exhibit a decrease in flaw sensitivity and increasing strength with either temperature or moisture, although moisture also seemed to increase interfacial debonding between filament and matrix. The combination of temperature and moisture degraded performance by increasing interfacial debonding, and rendering the epoxy more prone to fracture.

Clements, L. L.

Studies of erosion of solar max samples of Kapton and Teflon

Several samples of Kapton and Teflon which was exposed to solar radiation were examined. The samples represent material behavior in near Earth space. Clues to the identity of erosive processes and the responsible species were searched for. Interest centered around oxygen atoms which are ubiquitous at these altitudes and are known to erode some metal surfaces. Three diagnostic methods were employed: optical microscopy, scanning electron microscopy, and fourier transform infrared spectroscopy. Two types of simulation were used: a flow containing low energy oxygen atoms and bombardment with 3000 volt Ar ions. Results and conclusions are presented.

Fristrom, R. M.

Effect of LID (Registered) processing on the microstructure and mechanical properties of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo titanium foil-gauge materials

A study was undertaken to determine the mechanical properties and microstructures resulting from Liquid Interface Diffusion (LID -Registered) processing of foil-gauge specimens of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo coated with varying amounts of LID material. In addition, the effects of various elevated temperature exposures on the concentration profiles of the LID alloying elements were investigated, using specimens with a narrow strip of LID material applied to the surface. Room and elevated temperature tensile properties were determined for both coated and uncoated specimens. Optical microscopy was used to examine alloy microstructures, and scanning electron microscopy to examine fracture surface morphologies. The chemical concentration profiles of the strip-coated specimens were determined with an electron microprobe.

Balckburn, Linda B.

Thermal stress cycling of GaAs solar cells

Thermal stress cycling was performed on gallium arsenide solar cells to investigate their electrical, mechanical, and structural integrity. Cells were cycled under low Earth orbit (LEO) simulated temperature conditions in vacuum. Cell evaluations consisted of power output values, spectral response, optical microscopy and ion microprobe mass analysis, and depth profiles on both front surface inter-grid areas and metallization contact grid lines. Cells were examined for degradation after 500, 5,000, 10,000 and 15,245 thermal cycles. No indication of performance degradation was found for any vendor's cell lot.

Francis, Robert W.

The first products made in space - Monodisperse latex particles

Monodisperse latex particles developed by seeded emulsion polymerization on various Space Shuttle flights are analyzed. The flight hardware was composed of a monodisperse latex reactor and a support electronics package, and the particles were examined by optical microscopy and TEM. Data on the particle size distributions, larger and smaller off-size particles, and conversion-time curves for the particles are examined and compared to ground-based results. It is observed that the ground-based polymerizations have more coagulum than the flight polymerizations; the flight latex particles have narrower size distributions than the ground particles; and the number of off-size larger particles in the flight particles is smaller than in the ground data.

Vanderhoff, J. W.

Solidification of Nb-Ge alloys in long drop tubes

The 30-m and 100 m-long drop tubes at the Marshall Space Flight Center have been used to obtain large undercooling in Nb-Ge alloys. Electron beam melting has been used to obtain drops approximately 2.5 mm in diam. In the 30-m tube, many specimens fell the length of the tube without solidifying, and were ultimately liquid-quenched in oil. The amount of undercooling prior to the quench was usually around 0.13 T(m). In the 100-m tube, freezing generally initiated during free fall, and the maximum undercooling was around 0.22 T(m). Microstructures were characterized by a combination of X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive analysis by X-rays. A variety of interesting microstructures was observed.

Bayuzick, R. J.