Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarization resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Electrically conductive palladium-containing polyimide films

Palladium addition makes light, flexible film with low resistivity to relieve space charging. Polyimide film is prepared in four steps: preparation of polyamic acid in polar solvent; addition of soluable palladium complex salt; fabrication of film of "palladium polyamic acid" solution; and thermal imidization of film to palladium-containing polyimide by 300 C heating. Lowered resistivities were achieved without loss in film flexibility or increase in film weight.

St.clair, A. K.↗
NASA NTRS1989

Surface Halogenation Of High-Temperature Superconductors

Surface halogenation experimental technique of postgrowth nonaqueous chemical processing of high-temperature superconductors. Research continues in use of technique to obtain superconducting and/or passivated surfaces, to etch bulk superconductors, and to make low-resistance electrical contacts. Most promising etchant is bromine dissolved in such polar nonaqueous solvents as alchols, acetone, or ether. Etchant appears to act only on surface without adversely affecting superconducting bulk of film.

Vasquez, Richard P.↗
NASA NTRS2011

Characterization of a Common-Gate Amplifier Using Ferroelectric Transistors

In this paper, the empirical data collected through experiments performed using a FeFET in the common-gate amplifier circuit is presented. The FeFET common-gate amplifier was characterized by varying all parameters in the circuit, such as load resistance, biasing of the transistor, and input voltages. Due to the polarization of the ferroelectric layer, the particular behavior of the FeFET common-gate amplifier presents interesting results. Furthermore, the differences between a FeFET common-gate amplifier and a MOSFET common-gate amplifier are examined.

Hunt, Mitchell↗
NASA NTRS1974

Ultra-stable oscillator with complementary transistors

A high frequency oscillator, having both good short and long term stability, is formed by including a piezoelectric crystal in the base circuit of a first bi-polar transistor circuit, the bi-polar transistor itself operated below its transitional frequency and having its emitter load chosen so that the input impedance, looking into the base thereof, exhibits a negative resistance in parallel with a capacitive reactance. Combined with this basic circuit is an auxiliary, complementary, second bi-polar transistor circuit of the same form with the piezoelectric crystal being common to both circuits. By this configuration small changes in quiescent current are substantially cancelled by opposite variations in the second bi-polar transistor circuit, thereby achieving from the oscillator a signal having its frequency of oscillation stable over long time periods as well as short time periods.

Kleinberg, L. L.↗
DOE OSTI2025

CFD Modeling of Concentration Polarization in High-Performance Flat-Sheet Modules

Membrane-based gas separation is a promising, regeneration-free route for industrial CO₂ capture, but its performance is often limited by concentration polarization (CP). Classical 1-D models neglect CP and thus overpredict fluxes, especially for today’s high-permeance, high-selectivity membranes. Therefore, we built a 3-D CFD model that resolves local species transport, boundary-layer resistance, permeate-side effects, and pressure drop in flat-sheet modules. Using the Concentration Polarization Coefficient (CPC) and the overall Effective Membrane CP Index (EAC), the model quantifies how geometry and operating conditions shape CP intensity. Simulations show CP becomes pronounced for advanced membranes, with feed-channel height emerging as the dominant geometric lever: shrinking the gap mitigates CP but raises pressure drop, forcing a trade-off between mass-transfer enhancement and energy cost. These insights emphasize the need for CFD-level analysis in next-generation module design, where 1-D treatments can severely underestimate required membrane area and misguide scale-up.

carbon capture↗
DOE OSTI2022

Enhancing Li + Transport in NMC811||Graphite Lithium–Ion Batteries at Low Temperatures by Using Low–Polarity–Solvent Electrolytes

LiNi x Co y MnzO 2 (x+y+z=1)||graphite lithium-ion battery (LIB) chemistry promises practical applications. However, its low-temperature (≤ –20°C) performance is poor because the increased resistance encountered by Li + transport in and across the bulk electrolytes and the electrolyte/electrode interphases induces capacity loss and battery failures. Though tremendous efforts have been made, there is still no effective way to reduce the charge transfer resistance (R ct ) which dominates low-temperature LIBs performance. In this work, we propose a strategy of using low-polarity-solvent electrolytes which have weak interactions between the solvents and the Li + to reduce R ct , achieving facile Li + transport at sub-zero temperatures. The exemplary electrolyte enables LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||graphite cells to deliver a capacity of ≈113 mAh g –1 (98% full-cell capacity) at 25°C and to remain 82% of their room-temperature capacity at –20°C without lithium plating at 1/3C. They also retain 84% of their capacity at –30°C and 78% of their capacity at –40°C and show stable cycling at 50°C.

25 ENERGY STORAGE↗
DOE OSTI2021

Polarization-induced 2D hole gases in pseudomorphic undoped GaN/AlN heterostructures on single-crystal AlN substrates

A high-conductivity two-dimensional (2D) hole gas is the enabler of wide-bandgap p-channel transistors. Compared to commonly used AlN template substrates with high dislocation densities, the recently available single-crystal AlN substrates are promising to boost the speed and power handling capability of p-channel transistors based on GaN/AlN 2D hole gases (2DHGs) thanks to the much lower dislocation densities and the absence of thermal boundary resistance. Using plasma-assisted molecular beam epitaxy, we report the observation of polarization-induced high-density 2DHGs in undoped pseudomorphic GaN/AlN heterostructures on the single-crystal AlN substrates with high structural quality and atomic steps on the surface. The high-density 2DHG persists down to cryogenic temperatures with a record high mobility exceeding 280 cm 2 /V s and a density of 2.2 × 10 13 /cm 2 at 10 K. These results shed light on aspects of improving 2D hole mobilities and indicate significant potential of GaN/AlN 2DHG grown on bulk AlN substrates for future high performance wide-bandgap p-channel transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Intrinsic quantized anomalous Hall effect in a moiré heterostructure

The quantum anomalous Hall (QAH) effect combines topology and magnetism to produce precisely quantized Hall resistance at zero magnetic field. We report the observation of a QAH effect in twisted bilayer graphene aligned to hexagonal boron nitride. The effect is driven by intrinsic strong interactions, which polarize the electrons into a single spin- and valley-resolved moiré miniband with Chern number C = 1. In contrast to magnetically doped systems, the measured transport energy gap is larger than the Curie temperature for magnetic ordering, and quantization to within 0.1% of the von Klitzing constant persists to temperatures of several kelvin at zero magnetic field. Electrical currents as small as 1 nanoampere controllably switch the magnetic order between states of opposite polarization, forming an electrically rewritable magnetic memory.

Science & Technology - Other Topics↗
DOE OSTI2023

Magnetism and spin-dependent transport phenomena across Verwey and Morin transitions in iron oxide/Pt bilayers

Understanding the influence of phase coexistence and phase transitions on spin transport properties in a ferromagnet/heavy metal (FM/HM) system is of utmost importance for spintronics. Here, we report a comprehensive investigation of the magnetic and spin transport properties of biphase iron oxide (BPIO = α-Fe 2 O 3 +Fe 3 O 4 )/Pt films over a wide temperature range, 10K ≤ T ≤ 300K. In-plane (IP) and out-of-plane (OOP) magnetometry and radio frequency transverse susceptibility measurements confirm the characteristic features of the Verwey and Morin transitions at T V ~ 120K and TM ~ 200 K, respectively. Further, anisotropic magnetoresistance (AMR) is observed in the BPIO film, which arises mainly from the spin polarized tunneling of conduction electrons between neighboring uniformly magnetized grains through the resistive grain boundary. Spin Hall magnetoresistance (SMR) and spin Hall anomalous Hall effect (SH-AHE) are detected in the BPIO/Pt films. Around the T V , the temperature evolution of SMR shows a sharp maximum, while SH-AHE exhibits a steep decrease. Both SMR and SH-AHE are strongly susceptible to the Verwey transition but the Morin transition, indicating that the interfacial magnetism of our BPIO/Pt film is dominated by the Fe 3 O 4 phase rather than the α-Fe 2 O 3 phase.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Durable, Ultra-Thin Diaphragms for Liquid Alkaline Water Electrolysis

W. L. Gore & Associates assembled a world class team (De Nora Tech, LLC; New York University; and thyssenkrupp nucera) to develop durable, ultra-low resistance diaphragms that dramatically improve system efficiency, dynamic response, and operational flexibility. To enable the use of ultra-thin diaphragms, an optimized electrode package was chosen as part of an electrode down select study. Ultra-thin diaphragms based on microporous polymer scaffolds imbibed with zirconia nanoparticles were developed and tested. Performance and durability on par with incumbent materials was demonstrated. A transparent electrolyzer to directly observe in-situ diaphragm-bubble interactions was designed and built, and simultaneous optical and electrochemical performance tests were performed. A Pressurized Alkaline Water Electrolysis (PAWE) single cell test station was designed to support advanced R&D in high-pressure electrolysis, particularly for evaluating novel electrode and separator configurations under elevated temperature and pressure operating conditions. Due to early project termination, the original scope could not be fully achieved.

08 HYDROGEN↗
NASA NTRS1975

Results of magnetospheric barium ion cloud experiment of 1971

The barium ion cloud experiment involved the release of about 2 kg of barium at an altitude of 31 482 km, a latitude of 6.926 N., and a longitude of 74.395 W. Significant erosion of plasma from the main ion core occurred during the initial phase of the ion cloud expansion. From the motion of the outermost striational filaments, the electric field components were determined to be 0.19 mV/m in the westerly direction and 0.68 mV/m in the inward direction. The differences between these components and those measured from balloons flown in the proximity of the extremity of the field line through the release point implied the existence of potential gradients along the magnetic field lines. The deceleration of the main core was greater than theoretically predicted. This was attributed to the formation of a polarization wake, resulting in an increase of the area of interaction and resistive dissipation at ionospheric levels. The actual orientation of the magnetic field line through the release point differed by about 10.5 deg from that predicted by magnetic field models that did not include the effect of ring current.

Adamson, D.↗
NASA NTRS1975

Exploring the cell: Sodium (beta-alumina) cupric chloride - Aluminum chloride - Sodium chloride between 136 and 200 C

Experiments were done with a molten-salt catholyte (initially CuCl2 in AlCl3-NaCl) separated from molten Na by beta alumina. The open-circuit reduction potentials were 4.3 and 3 volts for Cu++ and Cu+, respectively. High polarization and nonrechargeability characterized the cell's operation. The cell's ohmic resistance during discharge was higher than what would be expected from only the ionic resistance of the beta-alumina.

Miller, R. O.↗
NASA NTRS1991

Development of an Accelerated Test Method for the Determination of Susceptibility to Atmospheric Corrosion

The theoretical rationale is presented for use of a repetitive cyclic current reversal voltammetric technique for characterization of localized corrosion processes, including atmospheric corrosion. Applicability of this proposed experimental protocol is applied to characterization of susceptibility to crevice and pitting corrosion, atmospheric corrosion and stress corrosion cracking. Criteria upon which relative susceptibility is based were determined and tested using two iron based alloys commonly in use at NASA-Kennedy; A36 (a low carbon steel) and 4130 (a low alloy steel). Practicality of the procedure was demonstrated by measuring changes in anodic polarization behavior during high frequency current reversal cycles of 25 cycles per second with 1 mA/sq cm current density amplitude in solutions containing Cl anions. The results demonstrated that, due to excessive polarization which affects conductivity of barrier corrosion product layers, A36 was less resistant to atmospheric corrosion than its 4130 counterpart; behavior which was also demonstrated during exposure tests.

Ambrose, John R.↗
NASA NTRS2012

Mirror coatings with atomic layer deposition : initial results

The new technology of Atomic Layer Deposition (ALD) holds promise to enable a future strategic mission that can address both ultraviolet (UV) astrophysics and optical exoplanet science with a shared telescope. The technology path to a shared telescope requires the development of a mirror coating with high reflectance from 100 nm to 1000 nm, and low polarization effects (i.e., s-p phase shifts that can vary with angle of incidence across a primary and secondary mirror) in the optical range. Currently, UV coatings have low reflectance, and conventional optical coatings have poor polarization properties for high-contrast coronagraph applications. In this paper we attempt to take a first step toward solving both problems simultaneously by using ALD, taking advantage of the fact that ALD can potentially produce mirror coatings with denser layers than conventional coatings (hence better reflectance, durability, and water resistance). In addition, ALD can potentially produce coatings with new composite materials (hence better control of polarization). We report here the results of our initial experiments with mirror coatings using ALD.

Traub, Wesley↗
NASA NTRS1998

Indium Tin Oxide-Magnesium Fluoride Co-Deposited Films for Spacecraft Applications

Highly transparent coatings with a maximum sheet resistivity between 10(exp 8) and 10(exp 9) ohms/square are desired to prevent charging of solar arrays for low Earth polar orbit and geosynchronous orbit missions. Indium tin oxide (ITO) and magnesium fluoride (MgF2) were ion beam sputter co-deposited onto fused silica substrates and were evaluated for transmittance, sheet resistivity and the effects of simulated space environments including atomic oxygen (AO) and vacuum ultraviolet (VUV) radiation. Optical properties and sheet resistivity as a function of MgF2 content in the films will be presented. Films containing 8.4 wt.% MgF2 were found to be highly transparent and provided sheet resistivity in the required range. These films maintained a high transmittance upon exposure to AO and to VUV radiation, although exposure to AO in the presence of charged species and intense electromagnetic radiation caused significant degradation in film transmittance. Sheet resistivity of the as-fabricated films increased with time in ambient conditions. Vacuum beat treatment following film deposition caused a reduction in sheet resistivity. However, following vacuum heat treatment, sheet resistivity values remained stable during storage in ambient conditions.

Dever, Joycer A.↗
DOE OSTI2024

Effect of V Content on Corrosion Behavior of Al-V Alloys Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Al-V alloys produced via high-energy ball milling have been reported to show simultaneous improvement of corrosion resistance and mechanical properties compared to traditional Al alloys. In these alloys, V content plays a crucial role in increasing or decreasing the corrosion resistance. Therefore, the effect of V and microstructure on corrosion of high-energy ball milled and subsequently spark plasma sintered Al-xV alloys (x = 2, 5, 10 at%) has been studied. Cyclic potentiodynamic polarization tests and electrochemical impedance spectroscopic analysis revealed the increment of V content up to 5 at% enhanced the corrosion resistance of the alloy. However, highly heterogeneous microstructure in Al-10 at%V resulted in significant localized corrosion over the immersion time. The electrochemical impedance spectroscopy studies over 14 days of immersion revealed underlying corrosion mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interfacial reconstruction effects in insulating double perovskite Nd2NiMnO6/SrTiO3 and Nd2NiMnO6/NdGaO3 thin films

Ferromagnetic insulating (FMI) double perovskite oxides (DPOs) A2BB′O6 with near-room-temperature Curie temperatures are promising candidates for ambient-temperature spintronics applications. To realize their potential, epitaxial stabilization of DPO films and understanding the effect of multiple broken symmetries across the film/substrate interface are crucial. This study investigates ultrathin films of the FMI Nd2NiMnO6 grown on SrTiO3 (STO) and NdGaO3 (NGO) substrates. By comparing growth on these substrates, we examine the influence of polarity and structural symmetry mismatches, which are absent in the NGO system. The interface exhibits immeasurable resistance in both cases. Using synchrotron x-ray diffraction, we show that films have three octahedral rotational domains because of the structural symmetry mismatch with the STO substrate. Furthermore, our coherent Bragg rod analysis of specular x-ray diffraction reveals a significant modification of the out-of-plane lattice parameter within a few unit cells at the film/substrate interface and the surface. This arises from polarity compensation and surface symmetry breaking, respectively. These structural alterations influence the Mn orbital symmetry, a dependence that we further confirm through x-ray linear dichroism measurements. Since the ferromagnetism in insulating DPOs is mediated by orbital-dependent superexchange interactions [Phys. Rev. Lett. 100, 186402 (2008)0031-900710.1103/PhysRevLett.100.186402], our study provides a framework for understanding the evolution of magnetism in ultrathin geometry.

Bhattacharya, Nandana↗
DOE OSTI2022

Quantifying the Relationship Between Microstructure and Performance in Gadolinium-Doped Ceria Infiltrated Ni/YSZ Symmetric Cells

Infiltration of mixed ionic/electronic conducting (MIEC) nanocatalysts into the anodes of solid oxide fuel cells (SOFCs) allow the hydrogen oxidation reaction (HOR) to occur at double-phase boundaries (DPBs), rather than being confined only to the triple phase boundaries (TPBs). In this research, we use a combination of cross-sectional scanning electron microscopy (SEM), three-dimensional (3-D) reconstruction, and electrochemical methods to characterize both baseline and gadolinium-doped ceria (GDC)-infiltrated symmetric cells, with the goal of establishing a comparison between the density of electrochemically active sites in uninfiltrated and GDC-infiltrated cells. Here, electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT) analysis showed GDC infiltration decreased the overall polarization of the anode by a factor of 8.78 X, and decreased the resistance associated with the reactions at the TPBs/DPBs by a factor of over 21 X. By quantifying expected GDC deposition morphology in the Ni/YSZ anode it is estimated that reactions occur in the baseline cell up to 84 nm from the active TPB lines.

36 MATERIALS SCIENCE↗