SEARCH · Search NASA

Results for “Prepregs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1970

NERVA materials development

Materials development topics include: development of analysis techniques to adjust heterogeneous data; determination of thermal conductivity for AISI 347 stainless steel and elastic moduli and Poisson's ratio for Inconel 718 and Ti 5Al-2.5Sn; embrittlement effects of 1400 psi gaseous hydrogen for alloy 718 and Ti 5Al-2.5Sn; cryogenic radiation damage of Ti 5Al-2.5Sn; and evaluation of prepreg, impregnation, and fabric materials for optimum fibrous graphite properties. Component support topics include: tensile design allowable development of Ti 5Al-2.5Sn for turbopump applications; evaluation of fatigue, fracture toughness, and stress corrosion properties of AA 7039-T63 for pressure vessel applications; development of AISI 347 sheet tensile and creep properties for nozzle applications; evaluation of orbital weld techniques for aluminum line fabrication; material selection of shield materials; development of high load friction and wear properties of hard chrome/gold plate combinations; and evaluation of weld processes for NASS duct coolant channel fabrication.

Mandell, B.↗

NASA NTRS1972

Filament-wound graphite/epoxy rocket motor case

The fabrication procedures are described for a filament-wound rocket motor case, approximately 56 cm long x 71 cm diameter, utilizing high tensile strength graphite fibers. The process utilized Fiberite Hy-E-1330B prepreg tape which consists of Courtaulds HTS fibers in a temperature-sensitive epoxy matrix. This fabrication effort, with resultant design, material and process recommendations, substantiates the manufacturing feasibility of graphite/epoxy rocket motor cases in the 56 cm x 71 cm size range.

Humphrey, W. D.↗

NASA NTRS1974

Adhesive coating eliminated in new honeycomb-core fabrication process

Technique eliminates use of silicone-based adhesive material as bonding medium. Adhesive requires precise time-temperature cure. Prepreg resin is used as bonding medium, and each layer is laminated together to form honeycomb billet. Process can be used in any application where nonmetallic honeycomb core is being fabricated.

Batty, W. L.↗

NASA NTRS1972

NERVA turbopump bearing retainer fabrication on nonmetallic retainer

The need for a low-wear, lightweight, high strength bearing retainer material with a radiation degradation threshold of 10 to the 9th power rads (C) prompted development of nonmetallic reinforced polymers of the following types: (1) polybenzimidazole, (2) polyimide, and (3) polyquinoxaline. Retainers were machined from tubular laminates (billets), including reinforcement by either glass or graphite fabric or filament. Fabrication of billets involves hot preimpregnation of the reinforcement fabric or filament with polymer followed by wrapping this prepreg over a heated mandrel to form a tube with the required thickness and length.

Accinelli, J. B.↗

NASA NTRS1973

Fabrication of graphite/epoxy cases for orbit insertion motors

The fabrication procedures are described for filament-wound rocket motor cases, approximately 26.25 inches long by 25.50 inches diameter, utilizing graphite fibers. The process utilized prepreg tape which consists of Fortafil 4-R fibers in the E-759 epoxy resin matrix. This fabrication effect demonstrated an ability to fabricate high quality graphite/epoxy rocket motor cases in the 26.25 inch by 25.50 inch size range.

Schmidt, W. W.↗

NASA NTRS1974

Filament winding S-glass/polyimide resin composite processing studies

The work performed in selecting a TRW A-type polyimide resin that would be suitable for fabrication of filament wound reinforced plastic structures is described. Several different formulations were evaluated after which the P105AC formulation was selected as the most promising. Procedures then were developed for preparing P105AC/S-glass roving prepreg and for fabricating filament wound structural composites. Composites were fabricated and then tested in order to obtain tensile and shear strength information. Small, closed-end cylindrical pressure vessels then were fabricated using a stainless steel liner and end fittings with a P105AC/S-glass polar wound overwrap. These pressure vessels were cured in an air circulating oven without augmented pressure. It is concluded that the P105AC resin system is suitable for filament winding; that low void content, high strength composites are obtained by the filament winding process; and that augmented pressure is not required to effect the fabrication of filament wound P105AC composites.

Vaughan, R. W.↗

NASA NTRS1974

Development of design data for graphite reinforced epoxy and polyimide composites

Processing techniques and design data were characterized for a graphite/epoxy composite system that is useful from 75 K to 450 K, and a graphite/polyimide composite system that is useful from 75 K to 589 K. The Monsanto 710 polyimide resin was selected as the resin to be characterized and used with the graphite fiber reinforcement. Material was purchased using the prepreg specification for the design data generation for both the HT-S/710 and HM-S/710 graphite/polyimide composite system. Lamina and laminate properties were determined at 75 K, 297 K, and 589 K. The test results obtained on the skin-stringer components proved that graphite/polyimide composites can be reliably designed and analyzed much like graphite/epoxy composites. The design data generated in the program includes the standard static mechanical properties, biaxial strain data, creep, fatigue, aging, and thick laminate data.

Scheck, W. G.↗

NASA NTRS1974

TRW A-type polyimide resin for filament winding

Studies were conducted to select a TRW A-type polyimide resin that would be suitable for fabrication of filament wound reinforced plastics structures. Several different formulations were evaluated after which the P105AC formulation was selected as the most promising. Procedures were developed for preparing P105AC/S-glass roving prepreg and for fabricating filament wound structural composites. Composites were fabricated and then tested in order to obtain tensile and shear strength information. Small, closed-end cylindrical pressure vessels then were fabricated using a stainless steel liner and end-fittings with a P105AC/S-glass polar-wound overwrap. These pressure vessels were cured in an air circulating oven without augmented pressure. It was concluded upon completion of this study that the P105AC resin system is suitable for filament winding; that low void content, high strength composites are obtained by the filament winding process; and that augmented pressure is not required to effect the fabrication of filament wound P105AC composites.

Vaughan, R. W.↗

NASA NTRS1975

Acoustic emission from composite-reinforced metals

Acoustic-emission (AE) count rates are presented for tensile loading of unidirectional boron-epoxy and for aluminum sheets reinforced with unidirectional boron-epoxy. It is shown that different prepreg materials have different characteristic AE patterns. Results from composite-reinforced metal specimens show that early failures are accompanied by a sharp increase in AE count rate at the knee of the bilinear stress-strain diagram. It is further shown that the count rates are a function of specimen fabrication and that higher total counts do not necessarily correspond to early failures.

Henneke, E. G., II↗

NASA NTRS1977

A new polyimide laminatine resin

Addition polyimide for composite materials is based on liquid monomers and has significant advantages over most existing high-temperature resins. Essentially solventless prepreg has improved drape, tack.

Barrick, J. D. W.↗

NASA NTRS1977

Effect of processing parameters on autoclaved PMR polyimide composites

A study was conducted to determine the effect of processing parameters on the processability and properties of autoclaved fiber reinforced PMR polyimide composites. Composites were fabricated from commercially available graphite fabric and glass fabric PMR polyimide prepreg materials. Process parameters investigated included degree of resin advancement, heating rate, and cure pressure. Composites were inspected for porosity by ultrasonic C scan and photomicrographic examination. Processing characteristics for each set of process parameters and the effect of process parameters on composite mechanical properties at room temperature and 600 F are described.

Vannucci, R. D.↗

NASA NTRS1977

Poly /Diels-Alder/ matrix resins

A poly (Diels-Alder) (PDA) resin approach was investigated as a means to achieve autoclavability of high-temperature resistant resin/fiber composites under mild fabrication conditions. The results of the study were highly promising and program objectives were achieved. Low-void content Type A-S graphite reinforced composites were autoclave fabricated from a PDA resin/fiber prepreg prepared from an acetone:methanol:dioxane varnish. Autoclave conditions were 400 F and 100 psi for up to two hours duration. After postcure at temperatures up to 600 F, the composites demonstrated high initial mechanical properties at temperatures up to 550 F. The results from isothermal aging studies in air for 1000 hours indicated potential for long-term (over 1000 hours) use at 500 F and shorter-term use at 550 F.

Jones, R. J.↗

NASA NTRS1976

Recent advances in the development of composites based on the NCNS resins

The NCNS resins, a new class of addition polymerized polyaromatic melamines, have undergone further development in the past year. Pilot plant quantities of resin NCNS-12M have been made available for evaluation. High solids laminating varnishes were prepared in alcohol/ethyl acetate and alcohol/chlorinated solvent mixtures. The prepregs had sufficient room temperature stability after three month storage to retain good processing characteristics and good bonded mechanical properties. Laminates were fabricated by vacuum bag-autoclave processing and by 5 minute press molding cycles. These laminates had low flame spread and low smoke emitting properties and retained good elevated temperature properties upon long-term oxidative aging. Humidity aging studies were carried out for 30 days at 95% R.H., 120 F. on NCNS/graphite fiber laminates. Initial results indicate that the NCNS resins, particularly those prepared from polymethylene polyphenylamines, are resistant to environmental degradation of elevated temperature mechanical strength.

Kray, R. J.↗

NASA NTRS1976

Producibility aspects of advanced composites for an L-1011 Aileron

The design of advanced composite aileron suitable for long-term service on transport aircraft includes Kevlar 49 fabric skins on honeycomb sandwich covers, hybrid graphite/Kevlar 49 ribs and spars, and graphite/epoxy fittings. Weight and cost savings of 28 and 20 percent, respectively, are predicted by comparison with the production metallic aileron. The structural integrity of the design has been substantiated by analysis and static tests of subcomponents. The producibility considerations played a key role in the selection of design concepts with potential for low-cost production. Simplicity in fabrication is a major factor in achieving low cost using advanced tooling and manufacturing methods such as net molding to size, draping, forming broadgoods, and cocuring components. A broadgoods dispensing machine capable of handling unidirectional and bidirectional prepreg materials in widths ranging from 12 to 42 inches is used for rapid layup of component kits and covers. Existing large autoclaves, platen presses, and shop facilities are fully exploited.

Van Hamersveld, J.↗

NASA NTRS1978

Fiber reinforced PMR polyimide composites

Commercially obtained PMR-15 polyimide prepregs with S-glass and graphite fiber reinforcements were evaluated along with in-house prepared glass and graphite cloth PMR 2 materials. A novel autoclave approach was conceived and used to demonstrate that both the PMR systems respond to 1.4 MPa (200 psi) autoclave pressures to produce void free composites equivalent to die molded laminates. Isothermal gravimetric analysis and subsequent mechanical property tests indicated that the PMR 2 system was significantly superior in thermo-oxidative stability, and that S-glass reinforcements may contribute to the accelerated degradation of composites at 316 C (600 F) when compared to graphite fiber reinforced composites. Fully reversed bending fatigue experiments were conducted with a type of fixture unused for organic matrix composites. These studies indicated that the graphite fiber composites were clearly superior in fatigue resistance to the glass fiber reinforced material and that PMR matrix composite systems yield performance of the same order as composite materials employing other families of matrices.

Cavano, P. J.↗

NASA NTRS1977

Effect of processing parameters on autoclaved PMR polyimide composites

A study was conducted to determine the effect of processing parameters on the processability and properties of autoclaved fiber reinforced PMR polyimide composites. Composites were fabricated from commercially available graphite fabric and glass fabric PMR polyimide prepreg materials. Process parameters investigated included degree of resin advancement, heating rate, and cure pressure. Composites were inspected for porosity by ultrasonic 'C' scan and photomicrographic examination. Processing characteristics for each set of process parameters and the effect of process parameters on composite mechanical properties at room temperature and 600 F are described.

Vannucci, R. D.↗

NASA NTRS1978

Status review of PMR polyimides

The current status of first and second generation PMR polyimides are reviewed. Synthesis, processing, and applications were considered, using prepreg materials based on processable, high temperature resistant polyimides.

Serafini, T. T.↗

NASA NTRS1979

Design fabrication and test of graphite/polyimide composite joints and attachments for advanced aerospace vehicles

Graphite/polyimide (Gr/PI) bolted and bonded joints were investigated. Possible failure modes and the design loads for the four generic joint types are discussed. Preliminary sizing of a type 1 joint, bonded and bolted configuration is described, including assumptions regarding material properties and sizing methodology. A general purpose finite element computer code is described that was formulated to analyze single and double lap joints, with and without tapered adherends, and with user-controlled variable element size arrangements. An initial order of Celion 6000/PMR-15 prepreg was received and characterized.

Source record↗