Search NASA⌕ Search

SEARCH · Search NASA

Results for “SATELLITE ORBIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

General relativity and satellite orbits

The general relativistic correction to the position of a satellite is found by retaining Newtonian physics for an observer on the satellite and introducing a potential. The potential is expanded in terms of the Keplerian elements of the orbit and substituted in Lagrange's equations. Integration of the equations shows that a typical earth satellite with small orbital eccentricity is displaced by about 17 cm. from its unperturbed position after a single orbit, while the periodic displacement over the orbit reaches a maximum of about 3 cm. The moon is displaced by about the same amounts. Application of the equations to Mercury gives a total displacement of about 58 km. after one orbit and a maximum periodic displacement of about 12 km.

Rubincam, D. P.↗
NASA NTRS1993

Mars Relays Satellite Orbit Design Considerations for Global Support of Robotic Surface Missions

This paper discusses orbit design considerations for Mars relay satellite (MRS)support of globally distributed robotic surface missions. The orbit results reported in this paper are derived from studies of MRS support for two types of Mars robotic surface missions: 1) the mars Environmental Survey (MESUR) mission, which in its current definition would deploy a global network of up to 16 small landers, and 2)a Small Mars Sample Return (SMSR) mission, which included four globally distributed landers, each with a return stage and one or two rovers, and up to four additional sets of lander/rover elements in an extended mission phase.

Robitics Mars↗
NASA NTRS1978

Optimum satellite orbits for accurate measurement of the earth's radiation budget, summary

The optimum set of orbit inclinations for the measurement of the earth radiation budget from spacially integrating sensor systems was estimated for two and three satellite systems. The best set of the two were satellites at orbit inclinations of 80 deg and 50 deg; of three the inclinations were 80 deg, 60 deg and 50 deg. These were chosen on the basis of a simulation of flat plate and spherical detectors flying over a daily varying earth radiation field as measured by the Nimbus 3 medium resolution scanners. A diurnal oscillation was also included in the emitted flux and albedo to give a source field as realistic as possible. Twenty three satellites with different inclinations and equator crossings were simulated, allowing the results of thousand of multisatellite sets to be intercompared. All were circular orbits of radius 7178 kilometers.

Campbell, G. G.↗
NASA NTRSDate not supplied

Fusing Surface BRDF from Geostationary and Polar-Orbiting Satellite Sensors

The bi-directional reflectance distribution function (BRDF) describes the fundamental optical property of a surface and therefore has been retrieved from both geostationary (GEO) and polar-orbiting (or Low-Earth Orbit, LEO) satellite observations. In theory, although GEO and LEO observations feature different illumination-view geometries, they reflect the same physical property and the retrieved BRDF should be mutually consistent. This fact also suggests that we may derive a better BRDF product by synergistically fusing the GEO and LEO datasets. Here we demonstrate the idea by fusing Terra/Aqua MODIS and GOES16/17 ABI surface BRDF with the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm. Our processing is implemented in two steps. First, we compile and project both MODIS and ABI data on the same GeoNEX common grid, and then use the MODIS MAIAC BRDF (MCD19A3) as the prior information to perform atmospheric correction of ABI data and retrieve surface BRDF with the ABI MAIAC code. In the second step, we run the MAIAC code in the forward mode to simulate MODIS and ABI TOA radiances from the jointly retrieved surface BRDF and the corresponding illumination-view geometries. By comparing the simulated TOA radiances with corresponding observations (e.g., MOD02 and ABI05), we can quantitatively evaluate whether the jointly retrieved ABI surface BRDF improves over the separately retrieved MODIS and ABI BRDF products. We expect that the jointly retrieved BRDF data are more robust than the standard products and can help us reduce uncertainties in higher-level earth observation satellite products.

Geostationary satellite↗
NASA NTRS1974

A new method for satellite orbit determination using an operational worldwide transponder network

The method utilizes computer programs developed for the forthcoming ATS-F/NIMBUS-F tracking and data relay experiment where the basic tracking measurements are multiple path round-trip propagation times and rates. This method of orbit computation has recently been successfully evaluated by tracking a geostationary satellite (ATS-3) using an existing VHF (150 MHz) network of automatic transponders. A master station sequentially interrogates each transponder via the ATS-3. The master site is located at Schenectady, N. Y. and four automatic transponders were located at Shannon, Reykajavik, Buenos Aires, and Seattle respectively. Data at hourly intervals were collected during a 24 hour period on April 18-19, 1973. After correcting this data for known systematic errors it was provided as input to an orbit determination program where all satellite motions during signal propagation are rigorously accounted for. The resulting estimated ATS-3 orbit yielded observational residuals on the order of 100 meters. By using more than one satellite the present scheme is further capable of accurately locating several stationary or mobile terminals as part of the overall orbital solution.

Lynn, J. J.↗
NASA NTRS1981

Relative performance of algorithms for autonomous satellite orbit determination

Limited word size in contemporary microprocessors causes numerical problems in autonomous satellite navigation applications. Numerical error introduced in navigation computations performed on small wordlength machines can cause divergence of sequential estimation algorithms. To insure filter reliability, square root algorithms have been adopted in many applications. The optimal navigation algorithm requires a careful match of the estimation algorithm, dynamic model, and numerical integrator. In this investigation, the relationship of several square root filters and numerical integration methods is evaluated to determine their relative performance for satellite navigation applications. The numerical simulations are conducted using the Phase I GPS constellation to determine the orbit of a LANDSAT-D type satellite. The primary comparison is based on computation time and relative estimation accuracy.

Tapley, B. D.↗
NASA NTRS1973

Relative motion of near orbiting satellites.

The relative motion of two particles on adjacent orbits about the same primary has been investigated under the condition that both motions have the same period. The geometrical properties of the relative displacement and velocity traces, on representative planes, are studied. A complete state of the motion is given; and, the range and range-rate variations, over one or more orbits, are described. It has been found that cusps appear on some of the traces provided that a proper relationship exists between the eccentricity and inclination. (Here, one particle moves on a circular path while the second moves on an ellipse). The conditions for which cusps appear are given, and typical traces are shown.

Eades, J. B., Jr.↗
NASA NTRS1972

Stable longitudes for 12-hr eccentric orbit satellites.

The accelerated longitude drift regimes of eccentric 12-hr orbits are considered, due to the resonant geopotential. These quasi-stationary orbits are under investigation at NASA for large payload earth surveillance spacecraft in the small applications technology satellite (SATS) program. Inclinations near 'critical' are especially attractive because of their possible long term stability, and these are examined in detail. 'Stable' equator crossing longitudes for these satellites are found as functions of the argument of perigee. As long as the argument of perigee is between plus or minus 100 deg, these stable longitudes lie within a narrow range. Maximum 'east-west' stationkeeping requirements for these satellites at nonequilibrium positions are in the range of 0.3 to 3 m/sec/yr.

Wagner, C. A.↗
NASA NTRS1974

Calculation of precision satellite orbits with nonsingular elements /VOP formulation/

Review of some results obtained in an effort to develop efficient, high-precision trajectory computation processes for artificial satellites by optimum selection of the form of the equations of motion of the satellite and the numerical integration method. In particular, the matching of a Gaussian variation-of-parameter (VOP) formulation is considered which is expressed in terms of equinoctial orbital elements and partially decouples the motion of the orbital frame from motion within the orbital frame. The performance of the resulting orbit generators is then compared with the popular classical Cowell/Gauss-Jackson formulation/integrator pair for two distinctly different orbit types - namely, the orbit of the ATS satellite at near-geosynchronous conditions and the near-circular orbit of the GEOS-C satellite at 1000 km.

Velez, C. E.↗
NASA NTRS1982

A comparative study of atmospheric density models in the context of definitive and predictive earth satellite orbit determination

The results of a comparative orbit determination study of four global atmospheric density models (modified Harris-Priester, Jacchia-Roberts, Mass Spectrometer/Incoherent Scatter (MSIS), and Simple Exponential Model (SEM)) are presented. Utilizing these models, definitive orbit determination consistency and accuracy are evaluated using the maximum position differences that occur during 6-hour overlap periods between ephemerides generated from 30-hour data arcs. Propagated ephemerides are compared with definitive orbit solutions to evaluate predictive accuracy. The results indicate that, for satellites above 300 kilometers, all four atmospheric density models produce comparable orbit determination accuracies when an atmospheric drag scaling factor and the satellite state vector are estimated in the orbit determination process.

Shanklin, R. E., Jr.↗
NASA NTRS1964

Orbiting satellite surface temperature prediction and analysis

Temperature prediction of spacecraft orbiting the moon, earth or other planets is an essential Manned Spacecraft Center capability. Existing methods was found, however, were either too simplified or specialized for Mod requirements. A contract was, therefore, let with Midwest Research Institute in Kansas City, Missouri, to develop a computer program to spacecraft heat, loads and/or thin skin transient temperature while orbiting the moon, earth or other planets. It is this computer program, which has recently been completed, that I'd like to introduce. The computer program is written for the IBM 7094 computer and is in the Fortran II language.

HEAT FLUX↗
NASA NTRS1994

Simulation of interference between Earth stations and Earth-orbiting satellites

It is often desirable to determine the potential for radio frequency interference between earth stations and orbiting spacecraft. This information can be used to select frequencies for radio systems to avoid interference or it can be used to determine if coordination between radio systems is necessary. A model is developed that will determine the statistics of interference between earth stations and elliptical orbiting spacecraft. The model uses orbital dynamics, detailed antenna patterns, and spectral characteristics to obtain accurate levels of interference at the victim receiver. The model is programmed into a computer simulation to obtain long-term statistics of interference. Two specific examples are shown to demonstrate the model. The first example is a simulation of interference from a fixed-satellite earth station to an orbiting scatterometer receiver. The second example is a simulation of interference from earth-exploration satellites to a deep-space earth station.

Bishop, D. F.↗
NASA NTRS1980

A study of the cleft region using synoptic ionospheric plasma data obtained by the polar orbiting satellites Aeros-B and Isis-2

The concentrations of O(+) and NO(+) in the dayside high-latitude cleft region of the ionosphere are investigated based on synoptic particle and plasma measurements obtained by the polar orbiting Aeros-B and Isis-2 satellites. At a time when the orbital planes of the satellites are almost at right angles to each other, three maxima in ion temperature are observed, with two of them accompanied by an increased electron temperature and electron density irregularities, and the density of the molecular ions NO(+) and O2(+) is found to increase at the expense of O(+) density. Results are discussed in terms of a theory relating perpendicular electric fields to oxygen atom reaction rates. Systematic analysis of the Aeros data base reveals 14 additional instances of O(+) to NO(+) conversion, with a large variety of forms and structures reflecting the complex structure and dynamics of the high-latitude dayside ionosphere.

Kist, R.↗
NASA NTRS2019

Creating Data-Driven Vector Visualizations of Satellite Orbit Tracks Using NASA GIBS and Worldview

NASA Earth Observing System (EOS) currently operates dozens of remote sensing satellites, many of which can be viewed directly in NASA’s open-source Worldview application. Much of this satellite imagery can be viewed in near-real time as it is processed and served by NASA’s Global Imagery Browse Service (GIBS). To better educate users on the time and location of imagery, GIBS serves orbit track specific layers for each satellite. Worldview has historically served these layers as raster images but recent updates have enabled the application to now serve these layers using vector tiles. With the release of Worldview v3.0, orbit track layers can be displayed using mapbox vector tiles (MVT). This visualization format allows users to not only view and change the color of orbit track layers, as they could do previously with rasters, but also inspect individual vector points and filter layers by specific parameters such as time. The data contained within a MVT is further enhanced in Worldview with the combination of a JSON description file served from GIBS used to describe the MVT data. This presentation will provide an overview of the process of consuming orbit track vector tiles and data files from GIBS using a pipeline to configure, build and ultimately display the orbit tracks in Worldview. Furthermore, the presentation aims to describe how others can leverage our open-source code to display and enhance vector layers in their own applications.

Rice, Zachary↗