Search NASA⌕ Search

SEARCH · Search NASA

Results for “Schottky diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Design and Performance of a 2.7 THz Waveguide Tripler

The design and performance of a 0.9 THz to 2.7 THz waveguide tripler are presented. An unusual split block configuration with parallel input and output waveguides accommodates a monolithic membrane diode (MoMeD) circuit. Submicron planar GaAs Schottky diodes in single and antiparallel pairs are implemented with matching filters on a 3-micrometer thick suspended substrate as part of the MoMeD structure. The filters are a combination of short hammerheads and high-low impedance elements. Only a few circuit variations have been measured to date. The best current performance shows an output power of 0.1 microW and an efficiency of 0.002% at the band center frequency of 2.55 THz.

Maiwald, Frank↗
NASA NTRS2016

THz Limb Sounder (TLS) for Lower Thermospheric Wind, Oxygen Density, and Temperature

Neutral winds are one of the most critical measurements in the lower thermosphere and E region ionosphere (LTEI) for understanding complex electrodynamic processes and ion-neutral interactions. We are developing a high-sensitivity, low-power, noncryogenic 2.06 THz Schottky receiver to measure wind profiles at 100-140 km. The new technique, THz limb sounder (TLS), aims to measure LTEI winds by resolving the wind-induced Doppler shift of 2.06 THz atomic oxygen (OI) emissions. As a transition between fine structure levels in the ground electronic state, the OI emission is in local thermodynamic equilibrium(LTE) at altitudes up to 350km. This LTE property, together with day-and-night capability and small line-of-sight gradient, makes the OI limb sounding a very attractive technique for neutral wind observations. In addition to the wind measurement, TLS can also retrieve [OI] density and neutral temperature in the LTEI region. TLS leverages rapid advances in THz receiver technologies including subharmonically pumped (SHP)mixers and Schottky-diode-based power multipliers. Current SHP Schottky receivers have produced good sensitivity for THz frequencies at ambient environment temperatures (120-150 K), which are achievable through passively cooling in spaceflight. As an emerging technique, TLS can fill the critical data gaps in the LTEI neutral wind observations to enable detailed studies on the coupling and dynamo processes between charged and neutral molecules.

wind profiles↗
DOE OSTI2024

Improving 2D Schottky contacts using an intralayer strategy

An additional insulating layer between the electrode and semiconductor is beneficial to reduce the interfacial coupling and build two-dimensional (2D) Schottky contacts. Here, an intralayer strategy was proposed by using metallic 2D Bi 2 Sr 2 CaCu 2 O 8+δ (BSCCO) as contacts on 2D semiconductors. Inside a BSCCO monolayer, a conductive layer is sandwiched between insulating layers. Thus, the BSCCO contact has its own insulating layer, which is ultra-thin, single crystalline, and of high quality. This native layer could reduce the metal-induced gap state and thus weaken the interfacial Fermi level pinning effect. Such 2D Schottky diodes thus have barrier heights of 300 mV and a rectification ratio of 104. Furthermore, 2D metal-semiconductor field-effect transistors with BSCCO Schottky gate have a high on-off ratio, low leakage current, and low subthreshold swing value near the theoretical limit. The intralayer structure offers a new approach to improve the 2D Schottky junctions and has prospects in 2D electronics and optoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2003

Silicon Carbide Diodes Performance Characterization and Comparison With Silicon Devices

Commercially available silicon carbide (SiC) Schottky diodes from different manufacturers were electrically tested and characterized at room temperature. Performed electrical tests include steady state forward and reverse I-V curves, as well as switching transient tests performed with the diodes operating in a hard switch dc-to-dc buck converter. The same tests were performed in current state of the art silicon (Si) and gallium arsenide (GaAs) Schottky and pn junction devices for evaluation and comparison purposes. The SiC devices tested have a voltage rating of 200, 300, and 600 V. The comparison parameters are forward voltage drop at rated current, reverse current at rated voltage and peak reverse recovery currents in the dc to dc converter. Test results show that steady state characteristics of the tested SiC devices are not superior to the best available Si Schottky and ultra fast pn junction devices. Transient tests reveal that the tested SiC Schottky devices exhibit superior transient behavior. This is more evident at the 300 and 600 V rating where SiC Schottky devices showed drastically lower reverse recovery currents than Si ultra fast pn diodes of similar rating.

Lebron-Velilla, Ramon C.↗
NASA NTRS2002

THz local oscillator sources: performance and capabilities

Frequency multiplier circuits based on planar GaAs Schottky diodes have made significant advances in the last decade. Useful power in the >1 THz range has now been demonstrated from a complete solid-state chain. This paper will review some of the technology responsible for this achievement along with presenting a brief look at future challenges.

Schottky diode multipliers↗
NASA NTRS2010

High Power Local Oscillator Sources for 1-2 THz

Recent results from the Heterodyne Instrument for Far-Infrared (HIFI) on the Herschel Space Telescope have confirmed the usefulness of high resolution spectroscopic data for a better understanding of our Universe. This paper will explore the current status of tunable local oscillator sources beyond HIFI and provide demonstration of how power combining of GaAs Schottky diodes can be used to increase both power and upper operating frequency for heterodyne receivers. Availability of power levels greater than 1 watt in the W-band now makes it possible to design a 1900 GHz source with more than 100 microwatts of expected output power.

Schottky diodes↗
NASA NTRS2007

A Unique 520-590 GHz Biased Subharmonically-pumped Schottky Mixer

We report on the design and performance of a novel broadband, biased, subharmonic 520-590 GHz fix-tuned frequency mixer that utilizes planar Schottky diodes. The suspended stripline circuit is fabricated on a GaAs membrane mounted in a split waveguide block. The chip is supported by thick beam leads that are also used to provide precise radio frequency (RF) grounding, RF coupling and dc/intermediate frequency connections. At room temperature, the mixer has a measured double sideband noise temperature of 3000 to 4000 K across the design band.

Schottky diode mixers↗
NASA NTRS2004

THz semiconductor-based front-end receiver technology for space applications

Advances in the design and fabrication of very low capacitance planar Schottky diodes and millimeter-wave power amplifiers, more accurate device and circuit models for commercial 3-D electromagnetic simulators, and the availability of both MEMS and high precision metal machining, have enabled RF engineers to extend traditional waveguide-based sensor and source technologies well into the TI-Iz frequency regime. This short paper will highlight recent progress in realizing THz space-qualified receiver front-ends based on room temperature semiconductor devices.

Schottky diode multipliers↗
NASA NTRS2010

Wide-Band Heterodyne Submillimetre Wave Spectrometer for Planetary Atmospheres

We present calculations and measurements on a passive submillimetre wave spectroscopic sounder to gather data on the thermal structure, dynamics and composition of the upper atmosphere of a planet, e.g. the stratosphere of Jupiter, or the entire thickness of the atmosphere of Mars. The instrument will be capable of measuring wind speeds, temperature, pressure, and key constituent concentrations in the stratosphere of the target planet. This instrument consists of a Schottky diode based front end and a digital back-end spectrometer. It differs from previous space-based spectrometers in its combination of wide tunability (520-590 GHz), and rapid frequency switching between widely spaced lines within that range. This will enable near simultaneous observation of multiple lines, which is critical to the reconstruction of atmospheric pressure and density versus altitude profiles. At the same time frequency accuracy must be high to enable wind speeds to be determined directly by measurement of the line's Doppler shift.

Submillimeter↗
NASA NTRS2004

Reliability of Cascaded THz Frequency Chains with Planar GaAs Circuits

Planar GaAs Schottky diodes will be utilized for all of the LO chains on the HIPI instrument for the Herschel Space Observatory. A better understanding of device degradation mechanisms is desirable in order to specify environmental and operational conditions that do not reduce device life times. Failures and degradation associated with ESD (Electrostatic Discharge), high temperatures, DC currents and RF induced current and heating have been investigated. The goal is to establish a procedure to obtain the safe operating range for a given frequency multiplier.

reliability on Schottky diode multipliers↗
NASA NTRS1991

GaAs Schottky barrier varactor diodes for submillimeter wavelength power generation

The development of GaAs Schottky barrier diodes for frequencies well into the submillimeter wavelength range is discussed. These devices have the highest cutoff frequencies yet obtained for varactor diodes and have produced sufficient output power to drive Schottky mixers at frequencies as high as 640 GHz. The fundamental design tradeoff between cutoff frequency and capacitance modulation is explored. As the doping density is increased and the anode diameter is reduced, the dynamic cutoff frequency increases, reaching a maximum of roughly 5 THz. It is concluded that the maximum output frequency from harmonic multipliers based on standard GaAs varactor diodes will be about 1 THz.

Crowe, T. W.↗
DOE OSTI2022

Properties and device performance of BN thin films grown on GaN by pulsed laser deposition

Wide and ultrawide-bandgap semiconductors lie at the heart of next-generation high-power, high-frequency electronics. Here, in this paper, we report the growth of ultrawide-bandgap boron nitride (BN) thin films on wide-bandgap gallium nitride (GaN) by pulsed laser deposition. Comprehensive spectroscopic (core level and valence band x-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman) and microscopic (atomic force microscopy and scanning transmission electron microscopy) characterizations confirm the growth of BN thin films on GaN. Optically, we observed that the BN/GaN heterostructure is second-harmonic generation active. Moreover, we fabricated the BN/GaN heterostructure-based Schottky diode that demonstrates rectifying characteristics, lower turn-on voltage, and an improved breakdown capability (~234 V) as compared to GaN (~168 V), owing to the higher breakdown electrical field of BN. Our approach is an early step toward bridging the gap between wide and ultrawide-bandgap materials for potential optoelectronics as well as next-generation high-power electronics.

42 ENGINEERING↗
NASA NTRS1984

Topics in the optimization of millimeter-wave mixers

This report is in three parts: 1. In the first part a user-oriented computer program for the analysis of single-ended Schottky diode mixers is described. The program is used to compute the performance of a 140-220 GHz mixer and excellent agreement with measurements at 150 and 180 GHz is obtained. A sensitivity analysis indicates the importance of various diode and mount characteristics on the mixer performance. 2. The second part of this report describes a computer program for the analysis of varactor diode multipliers. The diode may operate in either the reverse biased varactor mode or with substantial forward current flow where the conversion mechanism is predominantly resistive. In addition, a design for a varactor diode doubler, tunable over an output frequency range of 150-220 GHz, is given. The doubler has 10-20% conversion efficiency with an instantaneous bandwidth of 3%. 3. The third section of this report contains a description and analysis of i new H-plane rectangular waveguide transformer. The transformer can be made luckily and easily in split-block waveguide using a standard slitting saw. It is particularly suited for use in the millimeter-wave band, replacing conventional electroformed stepped transformers. A theoretical analysis of the transformer is given, and good agreement is obtained with measurements made at X-band. Design curves are included for transitions which have a VSWR <1.2 over a full waveguide band when the impedance ratio is as high as 4 to 1.

Millimeter-wave↗
NASA NTRS1995

Low-cost 20-22 GHz MIC active receiver/radiometer

A microwave integrated circuit active receiver is built and tested at 19-25 GHz. The receiver consists of a planar CPW-fed double folded-slot antenna coupled to a six-stage MESFET (metal semiconductor field effect transistors) amplifier and followed by a planar Schottky-diode detector. The folded-slot antenna on a GaAs half-space results in a wide frequency bandwidth suitable for MMIC amplifiers. The measured system performance show a video responsivity close to 1 GV/W at 20 GHz with a 3-dB bandwidth of 1500 MHz. A novel method which uses the planar video detector after the amplifier stages as an RF (radio frequency) mixer is used to measure the noise-figure of the direct detection radiometer. The system noise figure is 4.8 dB at 22 GHz. The radiometer sensitivity to a hot/cold load is 3.8 mu V/K. The measured antenna patterns show a 90% Gaussicity at 20-22 GHz. The active MIC receiver can be integrated monolithically for low-cost applications and is well suited for millimeter-wave linear imaging arrays.

PLANAR SCHOTTKY DIODE DETECTOR↗
DOE OSTI2022

Deep level defects in low-pressure chemical vapor deposition grown (010) β-Ga 2 O 3

This study provides the full-bandgap evaluation of defect state distributions in beta phase gallium oxide (β-Ga 2 O 3 ) grown by low-pressure chemical vapor deposition (LPCVD) on (010) β-Ga 2 O 3 substrates at high growth of up to 20 µm/h. Deep-level optical spectroscopy and deep-level transient spectroscopy measurements applied to Ni/β-Ga 2 O 3 Schottky diodes revealed the presence of a previously unreported defect state at E C -3.6 eV, which dominated the overall trap distribution in LPCVD grown material. However, states at E C -0.8 eV, E C -2.0 eV, and E C -4.4. eV were also detected, similar to prior studies on β-Ga 2 O 3 grown by other methods, with similar or lower concentrations for the LPCVD samples. The E C -0.8 eV and E C -2.0 eV states were previously connected to residual Fe impurities and gallium vacancies, respectively. The total concentration of traps in the LPCVD material was on par with or lower than the state-of-the-art metal–organic chemical vapor deposition-grown materials despite the much higher growth rate, and the distribution of states showed negligible dependence on SiCl 4 flow rate and doping concentration. These results demonstrate that the high growth rate of LPCVD-grown β-Ga 2 O 3 is very promising for achieving thick, low defect density, and high-quality layers needed for multi-kV device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Deep level transient spectroscopy investigation of ultra-wide bandgap ($\bar201$) and ($001$) β -Ga 2 O 3

Here, this work reports on a comprehensive examination of the electrical and thermal properties of vertical Schottky diodes fabricated on ($\bar201$) and ($001$)-oriented samples of β-Ga 2 O 3 . The temperature-dependent current–voltage (I–V) and capacitance–voltage (C–V) data were gathered and analyzed down to 60 K. Deep level transient spectroscopy (DLTS) was used to study bulk and interface defects in the two materials from approx. 325 K down to 60 K. In the bulk ($\bar201$) material, an electron trap was observed at E C -0.46 eV, with a capture cross section of 1.6 x 10 -14 cm 2 and a lambda-corrected maximum trap density of 9.08 x 10 15 cm -3 . These results and others indicate that the electron trap is a strong candidate for the well-known E1 defect in β-Ga 2 O 3 based on recent investigations. Additionally, in the ($\bar201$) material, the smooth modulation typical of interface states is evident at temperatures below 275 K. The ($001$) samples manifested what is likely the E2* electron trap at E C -0.68 eV, with a capture cross section of 1.64 x 10 -15 cm 2 and a lambda-corrected maximum trap density of 8.85 x 10 15 cm -3 . The presence of the E2* defect, in particular, is a contrast to the findings of recent DLTS investigations on β-Ga 2 O 3 , which report that E2* emerged only after low-energy proton irradiation. These results help to further map out the defect signatures found in β-Ga 2 O 3 materials, which are of vital importance in the design and fabrication of future β-Ga 2 O 3 devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗