Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supercapacitor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mono-/Bimetallic Doped and Heterostructure Engineering for Electrochemical Energy Applications

Designing efficient materials is crucial to meeting specific requirements in various electrochemical energy applications. Mono-/bimetallic doped and heterostructure engineering have attracted considerable research interest due to their unique functionalities and potential for electrochemical energy conversion and storage. However, addressing material imperfections such as low conductivity and poor active sites requires a strategic approach to design. This review explores the latest advancements in materials modified by mono-/bimetallic doped and heterojunction strategies for electrochemical energy applications. It can be subdivided into three key points: (i) the regulatory mechanisms of metal doping and heterostructure engineering for materials; (ii) the preparation methods of materials with various engineering strategies; and (iii) the synergistic effects of two engineering approaches, further highlighting their applications in supercapacitors, alkaline ion batteries, and electrocatalysis. Finally, the review concludes with perspectives and recommendations for further research to advance these technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemical Heterointerface Engineering on Hybrid Electrode Materials for Electrochemical Energy Storage

Abstract The chemical heterointerfaces in hybrid electrode materials play an important role in overcoming the intrinsic drawbacks of individual materials and thus expedite the in‐depth development of electrochemical energy storage. Benefiting from the three enhancement effects of accelerating charge transport, increasing the number of storage sites, and reinforcing structural stability, the chemical heterointerfaces have attracted extensive interest and the electrochemical performances of hybrid electrode materials have been significantly optimized. In this review, recent advances regarding chemical heterointerface engineering in hybrid electrode materials are systematically summarized. Especially, the intrinsic behaviors of chemical heterointerfaces on hybrid electrode materials are refined based on built‐in electric field, van der Waals interaction, lattice mismatch and connection, electron cloud bias and chemical bond, and their combination. The strategies for introducing chemical heterointerfaces are classified into in situ local transformation, in situ growth, cosynthesis, and other strategy. The recent progress about the chemical heterointerfaces engineering specially focusing on metal‐ion batteries, supercapacitors, and Li–S batteries are introduced in detail. Furthermore, the classification and characterization of chemical heterointerfaces are briefly described. Finally, the emerging challenges and perspectives about future directions of chemical heterointerface engineering are proposed.

Li, Wenbin↗
DOE OSTI2020

3D printing of metal-based materials for renewable energy applications

Large-scale renewable energy must overcome conversion and storage challenges before it can replace fossil fuels due to its intermittent nature. However, current sustainable energy devices still suffer from high cost, low efficiency, and poor service life problems. Recently, porous metal-based materials have been widely used as desirable cross-functional platforms for electrochemical and photochemical energy systems for their unique electrical conductivity, catalytic activity, and chemical stability. To tailor the porosity length scale, ordering, and compositions, 3D printing has been applied as a disruptive manufacturing revolution to create complex architected components by directly joining sequential layers into designed structures. In conclusion, this article intends to summarize cutting-edge advances of metal-based materials for renewable energy devices (e.g., fuel cells, solar cells, supercapacitors, and batteries) over the past decade.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interpenetrated Structures for Enhancing Ion Diffusion Kinetics in Electrochemical Energy Storage Devices

The architectural design of electrodes offers new opportunities for next-generation electrochemical energy storage devices (EESDs) by increasing surface area, thickness, and active materials mass loading while maintaining good ion diffusion through optimized electrode tortuosity. However, conventional thick electrodes increase ion diffusion length and cause larger ion concentration gradients, limiting reaction kinetics. We demonstrate a strategy for building interpenetrated structures that shortens ion diffusion length and reduces ion concentration inhomogeneity. This free-standing device structure also avoids short-circuiting without needing a separator. The feature size and number of interpenetrated units can be adjusted during printing to balance surface area and ion diffusion. Starting with a 3D-printed interpenetrated polymer substrate, we metallize it to make it conductive. This substrate has two individually addressable electrodes, allowing selective electrodeposition of energy storage materials. Using a Zn//MnO 2 battery as a model system, the interpenetrated device outperforms conventional separate electrode configurations, improving volumetric energy density by 221% and exhibiting a higher capacity retention rate of 49% compared to 35% at temperatures from 20 to 0 °C. Our study introduces a new EESD architecture applicable to Li-ion, Na-ion batteries, supercapacitors, etc.

25 ENERGY STORAGE↗
DOE OSTI2024

Evaluating consumer 3D printing nozzles as a low cost alternative for mesophase pitch-derived carbon fiber production

Synthetic fibers, such as Kevlar fibers, SiC fibers, and carbon fibers, are essential components for constructing high performance structures. Whether for engineering, sports, energy storage (batteries and supercapacitors), or aerospace applications, fiber microstructure plays a critical role in fiber properties and functionalities. However, studying fiber nozzle configurations and spinning parameters to achieve the desired microstructure remains challenging, costly, and time consuming. Here, mesophase pitch-derived fibers were used as an example to demonstrate that low cost, commercially available 3D printer nozzles can “print” fibers. Four different nozzles were used to “print” fibers and the effects of their features on fiber properties were observed and compared to other lab spun and commercial pitch- derived CF. A longer orifice length resulted in higher modulus fiber whereas a larger draw-down ratio yielded a stronger fiber. Furthermore, the findings provide a new opportunity for 3D printer hardware application and open up opportunities for developing low-cost fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Insight into the nanostructure of “water in salt” solutions: A SAXS/WAXS study on imide-based lithium salts aqueous solutions

"Water-in-salt " electrolyte (WISE) series have been studied for lithium-ion batteries and supercapacitor applications, but so far, most of the focus has been on the LiTFSI salt-based systems. Herein, we used small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS) and molecular dynamics (MD) simulation to investigate the solvation structure of a series of lithium salts with four different symmetric anions: (bis(fluoro sulfonyl)imide (FSI), bis(trifluoromethane sulfonyl)imide (TFSI), bis(pentafluoroethane sulfonyl) imide (BETI) and bis(nonafluorobutane sulfonyl)imide (BNTI)), which have similar parent structures but different lengths of the fluorocarbon chains. Two competing structures were found in the four lithium salts aqueous solutions: anion solvated structure and anion network. The anion network plays a crucial role in obtaining a stable and enlarged electrochemical window. The d spacing of the anion solvated structure follows a linear correlation with the number of carbons in the fluorocarbon chains and an exponential correlation with the concentrations. Further, we also observed that the transition from one structure to another is predominantly controlled by the salt volume fraction for all imide-based aqueous solutions. This work provides a systematic study of the atomistic scale structures of a series of imide-based lithium salt aqueous solutions that could extend the knowledge of WIS electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2024

Nanoengineering of 2D MBenes for energy storage applications: A review

2D transition metal borides (MBenes), a flourishing member of the 2D nanomaterial family, show great potential in a number of study areas. MBenes have received increasing attention thanks to their excellent electrical conductivity, structural and mechanical properties, and chemical stability, which have captivated researchers and sparked further exploration. Extensive theoretical and experimental investigations have unveiled its remarkable potential as electrode materials for electrochemical storage applications, making MBenes a subject of great interest. Despite the growing interest and numerous studies conducted, there is a lack of a comprehensive and systematic appraisal of MBenes' applications in electrochemical energy storage systems. Here, in light of this, firstly, we provide an overview of the current progress in the fabrication and characterization of MAB phases and MBenes. For the synthesis of MBenes, the following fabrication techniques were discussed; liquid-phase exfoliation, solid-state mechanical exfoliation, chemical vapor deposition, high-pressure chemical vapor deposition, microwave-assisted chemical etching, and ultrasound-assisted chemical etching methods. Then, we delve into the captivating potential of MBenes, specifically in the realm of energy storage applications and their role in enhancing electrochemical storage capabilities. The discussion encompasses their application in lithium-ion, lithium-sulfur, and lithium-selenide batteries, supercapacitors and other energy storage systems, providing a comprehensive perspective on their contributions to the energy landscape. Finally, a brief but significant summary of the challenges and opportunities of MBenes in practical applications was summarized. The present review provides a guide and scientific motivation for creating and developing advanced MBene-based nanomaterials, addressing the growing demand for cutting-edge energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2021

A review of energy storage technologies for demand-side management in industrial facilities

Demand-side management (DSM) in industrial facilities provides an opportunity for substantial amounts of energy cost savings, since industrial facilities are the largest energy consuming sectors globally. In this work, energy storage (ES) technologies are critically reviewed and compared with industrial DSM in mind. ES technologies reviewed herein include lithium-ion battery energy storage (BES), sodium-sulfur BES, lead-acid BES, flow BES, supercapacitor ES, superconducting magnetic ES, thermal ES, flywheel ES, pumped hydro ES, and compressed air ES. The fundamentals of these energy storage technologies are reviewed in detail including recent developments, followed by case studies and extensive comparisons. These comparisons include, but are not limited to cost per cycle analyses, levelized cost of energy analyses, and comparisons between performance, transient, and cost characteristics. Here, some key properties analyzed include the rated power, power density, efficiency, lifetime, discharge time, capital costs, and O&M costs.

25 ENERGY STORAGE↗
DOE OSTI2022

In-plane and through-plane dielectric properties of graphene oxide membrane: Effect of Al 3 + modification

A graphene oxide (GO) membrane can be used in structural dielectric capacitors and planar micro-supercapacitors as a dielectric separator material due to its excellent through-plane and in-plane dielectric properties. The ability to tailor the dielectric properties of the GO membrane is crucial for dielectric applications. We believe this to be the first demonstration describing how Al 3+ ions impact the dielectric properties of the GO membrane through cation to oxygenated functional groups interactions. In this work, the Al 3+ -modification to the GO membrane was realized through a facile pre-coordination method followed by layer-by-layer assembling. The influence of Al 3+ on the GO membranes’ through-plane and in-plane dielectric properties (dielectric constant and dielectric loss) was investigated in the frequency range from 0.01 Hz to 10 5 Hz. Plane-to-plane and edge-to-edge Al 3+ coordination with the functional group on the basal plane or edge of the GO sheets was proposed to understand the metal ion's impact on the dielectric properties. The results demonstrated that the Al 3+ modification was an effective strategy to tailoring the GO membranes’ dielectric properties in a low frequency regime and further suggested the possibility of designing dielectric GO membranes with controllable dielectric performance. At a low frequency range (0.01–1 Hz), the addition of Al 3+ increased the through-plane dielectric constant and decreased the in-plane dielectric constant. In terms of dielectric loss, unmodified GO membranes exhibited a higher in-plane dielectric loss than the through-plane dielectric loss. Al 3+ -modified GO membranes exhibited increased through-plane dielectric loss and decreased in-plane dielectric loss compared to the unmodified GO membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sonochemical synthesis of carbon dots, mechanism, effect of parameters, and catalytic, energy, biomedical and tissue engineering applications

Carbon-based nanomaterials are gaining more and more interest because of their wide range of applications. In this study, carbon dots (CDs) have shown exclusive interest due to unique and novel physicochemical, optical, electrical, and biological properties. Since their discovery, CDs became a promising material for wide range of research applications from energy to biomedical and tissue engineering applications. At same time several new methods have been developed for the synthesis of CDs. Compared to many of these methods, the sonochemical preparation is a green method with advantages such as facile, mild experimental conditions, green energy sources, and feasibility to formulate CDs and doped CDs with controlled physicochemical properties and lower toxicity. In the last five years, the sonochemically synthesized CDs were extensively studied in a wide range of applications. In this review, we discussed the sonochemical assisted synthesis of CDs, doped CDs and their nanocomposites. In addition to the synthetic route, we will discuss the effect of various experimental parameters on the physicochemical properties of CDs; and their applications in different research areas such as bioimaging, drug delivery, catalysis, antibacterial, polymerization, neural tissue engineering, dye absorption, ointments, electronic devices, lithium ion batteries, and supercapacitors. This review concludes with further research directions to be explored for the applications of sonochemical synthesized CDs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Graphitized Biocarbon Derived from Hydrothermally Liquefied Low-Ash Corn Stover

Graphitized biocarbon can be utilized for energy storage applications such as supercapacitors. The scientific community have geared their attention to obtain such value-added product from abundantly available and low-cost biomass feedstock agricultural residues such as corn stover. Lignocellulosic components embedded within the cell wall of biomass substrates can provide a fine template for enhanced ion storage, transport, and rate capabilities, desirable for electrochemical storage. Presented is the utilization of homogenized low ash content corn stover milled and sieved to desired specifications, which underwent hydrothermal liquefaction in the presence of Ni-based catalytic salts at 275 o C. The hydrochar obtained by solid residue extracted from the reaction slurry was washed to acid neutral and subjected to catalytic activation using ZnCl 2 , followed by thermal annealing at 400 o C for morphological and pore size enhancement of the resulting biochar. Carbonization was performed on acid neutralized hydrochar at 850 °C to further enhance pore structures and increase graphitization for improved conductivity. Catalytic materials exhibited a specific capacitance of 316 F g -1 and held a 100% retention beyond 10,000 cycles. BET, Raman, XRD, cyclic voltammetry, chronopotentiometry, and EIS are discussed herein.

Biomass↗
DOE OSTI2020

Strongly Correlated Ion Dynamics in Plastic Ionic Crystals and Polymerized Ionic Liquids

Understanding the mechanisms controlling ionic conductivity is critical for the development of the next generation of batteries and supercapacitors. This paper discusses the significant role played by ionic correlations in conductivity of concentrated ionic systems. Our studies of an organic ionic plastic crystal reveal that correlations in ions dynamics suppress conductivity by 25–100 times in comparison to the expected uncorrelated ionic conductivity estimated from the Nernst–Einstein relationship. Furthermore, additional analysis also demonstrates that ionic correlations suppress conductivity in polymerized ionic liquids and gel by ~10 times. Thus, ionic correlations, usually neglected in many studies, play a very important role in conductivity of concentrated ionic systems. These results cannot be explained by a diffusion of ion pairs because all these systems are essentially single ion conductors. In contrast, strongly correlated motions of mobile ions with the same charge (cation–cation or anion–anion correlations) are the major mechanism suppressing the ionic conductivity in these systems. Finally, on the basis of these results, we emphasize that charge transport rather than ion diffusion is critical for electrolyte performance and suggest the potential design of plastic crystals and polymer electrolytes with enhanced ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nature of Terminating Hydroxyl Groups and Intercalating Water in Ti 3 C 2 T x MXenes: A Study by 1 H Solid-State NMR and DFT Calculations

Since the discovery of two-dimensional transition metal carbides, referred to as MXenes, research efforts targeted their applications in energy storage, as lithium-ion batteries and supercapacitors. This interest is attributable to MXenes’ large volumetric capacitance, high rate handling capability and stable cycling performance, which largely rely on surface chemistry provided by the terminating groups, such as -OH, -O, and -F. However, the atomic-scale characterization of these surface terminations challenges the diffraction methods. Solid-state (SS)NMR spectroscopy, especially 1 H SSNMR, is a promising approach for scrutinizing the surface terminations and the intercalated water in an atomistic-scale, yet only a few SSNMR studies in MXenes have been reported to date offering conflicting results and limited understanding of -OH terminations. Here, we used 1 H SSNMR experiments in concert with the DFT calculations of NMR parameters to identify multiple types of -OH groups, residing on the external and internal surfaces, in a commonly studied MXene, Ti 3 C 2 T x . The study also identifies bulk-like water trapped between the MXene flakes and interfacial water stranded on the surface. Lastly, two-dimensional 1 H -1 H correlation spectra elucidated the water-surface interactions and the mechanism of de-intercalation of water upon annealing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Pressure Infiltration/Expulsion of Aqueous NaCl in Planar Hydrophobic Nanopores

Pressure-driven permeation of water in a poorly wettable material results in a conversion of mechanical work into surface free energy representing a new form of energy storage, or absorption. When water is replaced by a concentrated electrolyte solution, the storage capacity of a nanoporous medium becomes comparable to high-end supercapacitors. The addition of salt can also reduce the hysteresis of the infiltration/expulsion cycle. Our molecular simulations provide a theoretical perspective into the mechanisms involved in the process, and underlying structures and interactions in compressed nanoconfined solutions. Specifically, we consider aqueous NaCl in planar confinements of widths of 1.0 nm and 1.64 nm and pressures of up to 3 kbar. Open ensemble Monte Carlo simulations utilizing fractional exchanges of molecules for efficient additions/removal of ions have been utilized in conjunction with pressure-dependent chemical potentials to model bulk phases under pressure. Confinements open to these pressurized bulk, aqueous electrolyte phases show reversibility at narrow pore sizes and irreversibility in wider ones, consistent with experiment, as well as strong hysteresis at both pore size. The addition of salt results in significant increases in the solid/liquid interfacial tension in narrower pores and associated infiltration and expulsion pressures. Furthermore, these changes are consistent with strong desalination effects at the lower pore size observed irrespective of external pressure and initial concentration.

25 ENERGY STORAGE↗
DOE OSTI2020

Structural Anomalies and Electronic Properties of an Ionic Liquid under Nanoscale Confinement

Ionic liquids (ILs) promise far greater electrochemical performance compared to aqueous systems, yet key physicochemical properties governing their assembly at interfaces within commonly used graphitic nanopores remain poorly understood. Here, we combine synchrotron X-ray scattering with first-principles molecular dynamics simulations to unravel key structural characteristics of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([TFSI] – ) ionic liquids confined in carbon slit pores. X-ray scattering reveals selective pore filling due to size exclusion, while filled pores exhibit disruption in the IL intermolecular structure, the extent of which increases for narrower slit pores. First-principles simulations corroborate this finding and quantitatively describe how perturbations in the local IL structure, particularly the hydrogen-bond network, depend strongly on the degree of confinement. Despite significant deviations in structure under confinement, electrochemical stability remains intact, which is important for energy storage based on nanoporous carbon electrodes (e.g., supercapacitors).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct Correlation of the Salt-Reduced Diffusivities of Organic Solvents with the Solvent’s Mole Fraction

We report that lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in organic solvents (especially propylene carbonate) has demonstrated extraordinary pseudocapacitive performance as an electrolyte in the supercapacitor configuration. However, the influence of the solvated ions on the diffusivity of the solvent molecules is yet to be understood. We examine the impact of LiTFSI on the diffusivity in five organic solvents: acetonitrile (ACN), tetrahydrofuran (THF), methanol (MeOH), dimethyl sulfoxide (DMSO), and propylene carbonate (PC) using a combination of neutron scattering, conductivity measurements, and molecular dynamics simulations. The extent of the diffusivity reduction in the concentration regime of ≤1 M directly correlates with the solvent mole fraction at which the solvation shells around Li + ions are of similar size in all the solvents, resulting in a universal ~50% reduction in the solvent diffusivity. These results provide guidance for formulation of the new electrolytes to enhance the performance of energy storage devices.

conductivity↗
DOE OSTI2021

Unraveling the Ion Adsorption Kinetics in Microporous Carbon Electrodes: A Multiscale Quantum-Continuum Simulation and Experimental Approach

With the understanding that sorption in porous carbon electrodes is crucial to many environmental and energy technologies, such as capacitive deionization (CDI), supercapacitor energy storage, and activated carbon filters. In each of these examples, a practical model that can describe ion electrosorption kinetics is highly desirable for accelerating material design. Here, we proposed a multiscale model to study the ion electrosorption kinetics in porous carbon electrodes by combining quantum mechanical simulations with continuum approaches. Our model integrates the Butler-Volmer (BV) equation for sorption kinetics and a continuously stirred tank reactor (CSTR) formulation with atomistic calculations of ion hydration and ion-pore interactions based on density functional theory (DFT). We validated our model experimentally by using ion mixtures in a flow-through electrode CDI device and developed an in-line UV absorption system to provide unprecedented resolution of individual ions in the separation process. We showed that the multiscale model captures unexpected experimental phenomena that cannot be explained by the traditional ion electrosorption theory. The proposed multiscale framework provides a viable approach for modeling separation processes in systems where pore sizes and ion hydration effects strongly influence the sorption kinetics, which can be leveraged to explore possible strategies for improving carbon-based and, more broadly, pore-based technologies

36 MATERIALS SCIENCE↗