Search NASA⌕ Search

SEARCH · Search NASA

Results for “active material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Robust Numerical Treatment of Solid-Phase Diffusion in Pseudo Two-Dimensional Lithium-Ion Battery Models

Solid-phase diffusion in active materials of lithium-ion batteries significantly affects charging and safety-related behavior of lithium-ion batteries. Therefore, it is essential to develop an efficient and robust numerical algorithm for solving solid-phase diffusion equations in physics-based battery models. In this work, we discuss the origins of numerical instabilities that can occur when solving the solid-phase diffusion equations using iterative methods. Then, in order to resolve such issues, we propose a simple numerical treatment to the surface flux term of discretized solid-phase diffusion equations. To demonstrate its numerical robustness, the proposed method is implemented into a pseudo two-dimensional (P2D) physics-based battery model and simulations are conducted at wide ranges of operating conditions. Even with extremely poor initial guesses for the Li+ concentrations of the active materials, computations using the proposed method do not diverge and the their computational speeds are comparable to those with conventional initial guesses. Comprehensive tests of the proposed method are also performed with a dynamic current profile based on US06 driving profile and a multi-stage charging profile with very high initial C-rate (12C).

battery modeling↗
DOE OSTI2020

Near Neutral pH Redox Flow Battery with Low Permeability and Long-Lifetime Phosphonated Viologen Active Species

A highly stable phosphonate-functionalized viologen is introduced in this work as the redox-active material in a negative potential electrolyte for aqueous redox flow batteries (ARFBs) operating at nearly neutral pH. The solubility is 1.23 m and the reduction potential is the lowest of any substituted viologen utilized in a flow battery, reaching –0.462 V versus SHE at pH = 9. The negative charges in both the oxidized and the reduced states of 1,1'-bis(3-phosphonopropyl)-[4,4'-bipyridine]-1,1'-diium dibromide ( BPP–Vi ) effect low permeability in cation exchange membranes and suppress a bimolecular mechanism of viologen decomposition. A flow battery pairing BPP–Vi with a ferrocyanide-based positive potential electrolyte across an inexpensive, non-fluorinated cation exchange membrane at pH = 9 exhibits an open-circuit voltage of 0.9 V and a capacity fade rate of 0.016% per day or 0.00069% per cycle. Overcharging leads to viologen decomposition, causing irreversible capacity fade. Our research introduces extremely stable, extremely low-permeating and low reduction potential redox active materials into near neutral ARFBs.

25 ENERGY STORAGE↗
DOE OSTI2019

Scalable Freeze-Tape-Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes

Nonflammable solid-state electrolytes can potentially address the reliability and energy density limitations of lithium-ion batteries. Garnet-structured oxides such as Li 7 La 3 Zr 2 O 12 (LLZO) are some of the most promising candidates for solid-state devices. Here, three-dimensional (3D) solid-state LLZO frameworks with low tortuosity pore channels are proposed as scaffolds, into which active materials and other components can be infiltrated to make composite electrodes for solid-state batteries. To make the scaffolds, we employed aqueous freeze tape casting (FTC), a scalable and environmentally friendly method to produce porous LLZO structures. Using synchrotron radiation hard X-ray microcomputed tomography, we confirmed that LLZO films with porosities of up to 75% were successfully fabricated from slurries with a relatively wide concentration range. The acicular pore size and shape at different depths of scaffolds were quantified by fitting the pore shapes with ellipses, determining the long and short axes and their ratios, and investigating the equivalent diameter distribution. The results show that relatively homogeneous pore sizes and shapes were sustained over a long range along the thickness of the scaffold. Additionally, these pores had low tortuosity and the wall thickness distributions were found to be highly homogeneous. These are desirable characteristics for 3D solid electrolytes for composite electrodes, in terms of both the ease of active material infiltration and also minimization of Li diffusion distances in electrodes. The advantages of the FTC scaffolds are demonstrated by the improved conductivity of LLZO scaffolds infiltrated with poly(ethylene oxide)/lithium bis(trifluoromethanesulfonyl)imide (PEO/LITFSI) compared to those of PEO/LiTFSI films alone or composites containing LLZO particles.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗
DOE OSTI2025

Spin‐State and Clustering Effects in Fe‐Complex Negolytes for Near‐Neutral Aqueous Redox Flow Batteries

Cost-effective redox-active materials are essential for advancing redox flow batteries (RFBs). Iron, with its abundance and suitability as a redox couple, is a promising candidate; however, achieving stable and fast redox reactions in aqueous RFBs remains a challenge. Here, this study presents an Fe-based negolyte stabilized by a hexadentate ligand, where Fe–ligand bonds are enhanced through intermolecular interactions. The sulfonate-substituted Fe complex exhibits a formal potential of −0.44 V versus Ag/AgCl and an exceptionally high rate constant of 0.69 cm s −1 . Near-neutral RFBs incorporating 0.5 M Fe complex show excellent cycling stability, with no discernible capacity fading over 300 cycles. This performance is attributed to intermolecular hydrogen bonds that reinforce Fe–ligand coordination and promote the formation of stable trimeric clusters. Operando electrochemical Raman spectroscopy and density functional theory reveal that π-backdonation from Fe(II) to the imino-phenolate moiety further stabilizes the complex after reduction. In contrast, the hydroxyl-substituted complex exhibits inferior stability due to weaker hydrogen bonding and less pronounced π-backdonation. These findings underscore the importance of ligand design and intermolecular interactions in developing cost-effective, high-performance redox-active materials for aqueous RFBs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Amino acids as performance-controlling additives in carbonation-activated cementitious materials

This article presents an investigation on the application of amino acids to control the CaCO{sub 3} crystallization in carbonation cured wollastonite composites. It was observed that wollastonite carbonated without any amino acid formed calcite as the primary polymorph of CaCO{sub 3}. In contrast, the use of amino acids as admixtures resulted in the formation of stable amorphous calcium carbonate (ACC), vaterite, and aragonite during the carbonation of wollastonite. The carbonated composites produced with amino acids were observed to have a lower critical pore size, but a higher total porosity, compared to the control batch. Additionally, the utilization of amino acids was observed to increase the flexural strength and compressive strength of the composites up to 106% and 48%, respectively, compared to the control batch. Such performance enhancement of the carbonated composites in the presence of amino acids was attributed to the reduced critical pore size and the formation of organic-inorganic hybrid phases in the matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimal high-throughput virtual screening pipeline for efficient selection of redox-active organic materials

As global interest in renewable energy continues to increase, there has been a pressing need for developing novel energy storage devices based on organic electrode materials that can overcome the shortcomings of the current lithium-ion batteries. One critical challenge for this quest is to find materials whose redox potential (RP) meets specific design targets. In this study, we propose a computational framework for addressing this challenge through the effective design and optimal operation of a high-throughput virtual screening (HTVS) pipeline that enables rapid screening of organic materials that satisfy the desired criteria. Starting from a high-fidelity model for estimating the RP of a given material, we show how a set of surrogate models with different accuracy and complexity may be designed to construct a highly accurate and efficient HTVS pipeline. We demonstrate that the proposed HTVS pipeline construction and operation strategies substantially enhance the overall screening throughput.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Metal–support interactions in metal oxide-supported atomic, cluster, and nanoparticle catalysis

Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal–support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called “strong metal–support interactions” have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Super-resolution and signal separation in contact Kelvin probe force microscopy of electrochemically active ferroelectric materials

In this work, imaging mechanisms in contact Kelvin probe force microscopy (cKPFM) are explored via information theory-based methods. Gaussian processes are used to achieve super-resolution in the cKPFM signal, effectively extrapolating across the spatial and parameter space. Tensor factorization is applied to reduce the multidimensional signal to the tensor convolution of the scalar functions that show a clear trending behavior with the imaging parameters. These methods establish a workflow for the analysis of the multidimensional datasets that can then be related to the relevant physical mechanisms. We also provide an interactive Google Colab notebook that goes through all the analyses discussed in the paper.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perspective—Enhancing Active Anode Material Performance for Lithium-Ion Batteries via Manipulation of Interfacial Chemistry

Over the past decade, conversion-type anodes have been viewed as an attractive frontrunner for use in the next-generation of high-capacity battery materials. However, many technological limitations exist in the stability and long-term reliability of these anodes for the commercialization of these electrodes. This perspective studies how interfacial interactions between different components of the electrode can help elucidate the key physical and chemical properties needed for the development of high-capacity materials for battery applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Redox-active oxide materials for thermal energy storage

Thermochemical storage materials having the general formula A x A′ 1-x B y B′ 1-y O 3-δ , where A=La, Sr, K, Ca, Ba, Y and B=Mn, Fe, Co, Ti, Ni, Cu, Zr, Al, Y, Cr, V, Nb, Mo, are disclosed. These materials have improved thermal storage energy density and reaction kinetics compared to previous materials. Concentrating solar power thermochemical systems and methods capable of storing heat energy by using these thermochemical storage materials are also disclosed.

14 SOLAR ENERGY↗
DOE OSTI2020

Redox-active oxide materials for thermal energy storage

Thermochemical storage materials having the general formula AxA′1-xByB′1-yO3-δ, where A=La, Sr, K, Ca, Ba, Y and B=Mn, Fe, Co, Ti, Ni, Cu, Zr, Al, Y, Cr, V, Nb, Mo, are disclosed. These materials have improved thermal storage energy density and reaction kinetics compared to previous materials. Concentrating solar power thermochemical systems and methods capable of storing heat energy by using these thermochemical storage materials are also disclosed.

14 SOLAR ENERGY↗
DOE OSTI2022

Redox-active oxide materials for thermal energy storage

Thermochemical storage materials having the general formula AxA′1-xByB′1-yO3-δ, where A=La, Sr, K, Ca, Ba, Y and B=Mn, Fe, Co, Ti, Ni, Cu, Zr, Al, Y, Cr, V, Nb, Mo, are disclosed. These materials have improved thermal storage energy density and reaction kinetics compared to previous materials. Concentrating solar power thermochemical systems and methods capable of storing heat energy by using these thermochemical storage materials are also disclosed.

Babiniec, Sean M.↗
DOE OSTI2023

Cathode materials for secondary batteries

A cathode material comprising: a cathode active material of formula LiNi x Mn y Co z O 2 or NaNi x Mn y Co z O 2 and having a partial or whole particle concentration gradient, wherein at least two or three elements concentration gradually change in the part or whole particle from the center part to the surface part of the particle (i.e. along a vector radius); 0.5<x≤1, 0≤y≤0.33, 0≤z≤0.33.

Amine, Khalil↗