Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Intrinsic Ion Transport Properties of Block Copolymer Electrolytes

Knowledge of intrinsic properties is of central importance for materials design and assessing suitability for specific applications. Self-assembling block copolymer electrolytes (BCEs) are of great interest for applications in solid-state energy storage devices. A fundamental understanding of ion transport properties, however, is hindered by the difficulty in deconvoluting extrinsic factors, such as defects, from intrinsic factors, such as the presence of interfaces between the domains. Here, we quantify the intrinsic ion transport properties of a model BCE system consisting of poly(styrene-block-ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt using a generalizable strategy of depositing thin films on interdigitated electrodes and self-assembling fully connected parallel lamellar structures throughout the films. Comparison between conductivity in homopolymer poly(ethylene oxide) (PEO)-LiTFSI electrolytes and the analogous conducting material in SEO over a range of salt concentrations (r, molar ratio of lithium ion to ethylene oxide repeat units) and temperatures reveals that between 20% and 50% of the PEO in SEO is inactive. Using mean-field theory calculations of the domain structure and monomer concentration profiles at domain interfaces-both of which vary substantially with salt concentration-the fraction of inactive PEO in the SEO, as derived from conductivity measurements, can be quantitatively reconciled with the fraction of PEO that is mixed with greater than a few volume percent of polystyrene. Despite the detrimental interfacial effects for ion transport in BCEs, the intrinsic conductivity of the SEO studied here (ca. 10 -3 S/cm at 90 degrees C, r = 0.085) is an order of magnitude higher than reported values from bulk samples of similar molecular weight SEO (ca. 10 -4 S/cm at 90 degrees C, r = 0.085). Finally, this work provides motivation and methods for pursuing improved BCE chemical design, interfacial engineering, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolyte Solvation Structure at Solid/Liquid Interface Probed by Nanogap Surface-Enhanced Raman Spectroscopy

Understanding the fundamental factors that drive ion solvation structure and transport is key to design high performance, stable battery electrolytes. Reversible ion solvation and desolvation are critical to the interfacial charge transfer process across the solid-liquid interface as well as the resulting stability of the solid electrolyte interphase (SEI). Here in this paper, we report the first study of Li+ salt solvation structure in aprotic solution in the immediate vicinity (~ 20 nm) of the solid electrode-liquid interface using surface-enhanced Raman spectroscopy (SERS) from a gold nanoparticle (Au NP) monolayer. The plasmonic coupling between Au NPs produces strong electromagnetic field enhancement in the gap region, leading to 5 orders of magnitude increase in Raman intensity for electrolyte components and their mixtures namely, lithium hexafluorophosphate (LiPF6), fluoroethylene carbonate (FEC), ethylene carbonate (EC) and diethyl carbonate (DEC). Further, we estimate and compare the lithium-ion solvation number derived from SERS and Infra-Red (FTIR) spectroscopy experiments to monitor and ascertain the changes in the solvation shell diameter in the confined nanogap region where there is maximum enhancement of the electric field. Our findings provide a new multi-modal spectroscopic approach to gain fundamental insights into the molecular structure of the electrolyte at the solid-liquid interface.

25 ENERGY STORAGE↗

Rapid Flame-Annealed CuFe 2 O 4 as Efficient Photocathode for Photoelectrochemical Hydrogen Production

Copper ferrite (CuFe 2 O 4 ) possesses an indirect bandgap in the range of 1.54–1.95 eV. It is used as an attractive p-type photocathode in photoelectrochemical (PEC) water splitting, and theoretically it can yield a maximum photocurrent density of ~27 mA/cm 2 and a maximum solar-to-hydrogen conversion efficiency of ~33%. To date, only a few reports have been published on CuFe 2 O 4 photocathodes with very low-photocurrent densities, with a maximum value of 0.4 mA/cm2 at 0.4 V vs RHE. Herein, we prepared a CuFe 2 O 4 photocathode on FTO glass with the sol–gel method followed by either high-temperature flame annealing or furnace annealing. We found that the flame-annealed CuFe 2 O 4 photocathode generated a photocurrent density of 1.82 mA/cm 2 at 0.4 V vs RHE that is approximately 3.5 times higher than the furnace-annealed CuFe 2 O 4 (0.52 mA/cm 2 ). This photocurrent density is also higher than those of all the reported CuFe 2 O 4 photocathodes, and any Cu containing ternary oxide (Cu–M–O, M: Fe, Bi, V, and Nb) photocathode (0.1–1.3 mA/cm 2 at 0.4 V vs RHE). An improved PEC performance of the flame-annealed CuFe 2 O 4 photocathode is elicited owing to the beneficial effects of flame annealing on the physical, optical, and electrical properties of CuFe 2 O 4 . Flame annealing enhances the light absorption property of the CuFe 2 O 4 photocathode by slightly reducing the bandgap, and by forming a thicker film with increased porosity. Flame annealing also reduces the oxygen vacancy concentration in CuFe 2 O 4 , thus facilitating charge transport and interfacial charge transfer processes. Moreover, flame annealing requires only 16 min, which is much shorter than the time required for furnace annealing (~9 h). Furthermore, these results demonstrate that flame annealing is a rapid and effective means for fabricating metal oxide photoelectrodes with an enhanced PEC water splitting performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Ion Specific Interactions of Alkali Cations with Dicarboxylate Dianions

Alkali metal cations often show pronounced ion specific interactions and selectivity with macromolecules in biological processes, colloids, and interfacial sciences, but a fundamental understanding about the underlying microscopic mechanism is still very limited. Here we report a direct probe of interactions between alkali metal cations (M{sup +}) and dicarboxylate dianions, O{sub 2}C(CH{sub 2})nCO{sub 2} (D{sub n}{sup 2-}) in the gas phase by combined photoelectron spectroscopy (PES) and ab initio electronic structure calculation on nine M{sup +}-D{sub n}{sup 2-} complexes (M = Li, Na, K; n = 2, 4, 6). PES spectra show that the electron binding energy (EBE) decreases from Li{sup +} to Na{sup +} to K{sup +} for complexes of M{sup +}-D{sub 2}{sup 2-}, whereas the order is Li{sup +} <Na{sup +} {approx} K{sup +} when M{sup +} interacts with a more flexible D{sub 6}{sup 2-} dianion. Theoretical modeling suggests that M{sup +} prefers to interact with both ends of the carboxylate -COOO{sup -} groups by bending the flexible aliphatic backbone, and the local binding environments are found to depend upon dicarboxylate size n and the specific cation M{sup +}. The observed variance of EBEs reflects how well a specific dicarboxylate dianion accommodates each M{sup +}. This work demonstrates the delicate interplay among several factors (electrostatic interaction, size matching, and strain energy) that likely play critical roles in determining the structures and energetics of gaseous clusters as well as ion specificity and selectivity in solutions and biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size dependent microbial oxidation and reduction of magnetite nano- and micro-particles

The ability for magnetite to act as a recyclable electron donor and acceptor for Fe- metabolizing bacteria has recently been shown. However, it remains poorly understood whether microbe-mineral interfacial electron transfer processes are limited by the redox capacity of the magnetite surface or that of whole particles. Here we examine this issue for the phototrophic Fe(II)-oxidizing bacteria Rhodopseudomonas palustris TIE-1 and the Fe(III)-reducing bacteria Geobacter sulfurreducens, comparing magnetite nanoparticles (d ≈ 12 nm) against microparticles (d ≈ 100-200 nm). By integrating surface-sensitive and bulk-sensitive measurement techniques we observed a particle surface that was enriched in Fe(II) with respect to a more oxidized core. This enables microbial Fe(II) oxidation to occur relatively easily at the surface of the mineral suggesting that the electron transfer is dependent upon particle size. However, microbial Fe(III) reduction proceeds via conduction of electrons into the particle interior, i.e. it can be considered as more of a bulk electron transfer process that is independent of particle size. The finding has potential implications on the ability of magnetite to be used for long range electron transport in soils and sediments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular electronics studies by synchrotron radiation

In molecular electronics research, the molecule-metal interfacial properties crucially control the electronic properties of the devices fabricated. We use synchrotron radiation techniques of PES and NEXAFS, complemented by STM, to study the molecular orientation and interfacial charge transfer processes of model molecule-metal systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure and interface control of GaN/MgAl{sub 2}O{sub 4} grown by metalorganic chemical vapor deposition: Substrate-orientation dependence

GaN films with single-crystal and polycrystalline structure were deposited on (111) and (100) MgAl{sub 2}O{sub 4} substrates by metalorganic chemical vapor deposition using a substrate modified by chemical etching and thermal passivation. The interface structure and chemical bonding state of the GaN/MgAl{sub 2}O{sub 4} interface was investigated using angle-resolved x-ray photoelectron spectroscopy and resulting valence band spectra. Our results indicate that the Al{sub 2}O{sub 3} buffered layer induced by thermal passivation of the (111) substrate remains unchanged during GaN deposition, which is primarily responsible for the epitaxial growth of GaN on (111) MgAl{sub 2}O{sub 4} substrate. However, for the as-processed (100) substrate, interfacial reactions take place between the formed MgO-terminated surface and GaN films and GaN with a polycrystalline structure on (100) substrate forms. From the interface engineering viewpoint, the appropriate interface modification will allow control of the interface reaction to obtain high-quality GaN films for future optoelectronic devices.

36 MATERIALS SCIENCE↗

ZnO/anthracene based inorganic/organic nanowire heterostructure: Photoresponse and photoluminescence studies

The effects of surface modification of vertically aligned ZnO nanowires (NWs) with anthracene for the improved photocurrent, photoresponse, and UV photoluminescence have been investigated in this work. The formation of ZnO/anthracene based inorganic/organic NWs heterostructure by surface capping with anthracene solution was confirmed from the high resolution transmission electron microscopy and Fourier transport infrared spectroscopy analyses. After the anthracene capping of ZnO NWs, despite an increase in dark current, we obtained a significant improvement in the photocurrent and photoresponsivity. A sixfold improvement in the UV photocurrent-to-dark current ratio is obtained with capping. Compared to the uncapped NWs, the photoresponse is significantly faster for the ZnO/anthracene system with response and reset times of 1.5 and 1.6 s, respectively. The room temperature photoluminescence spectra show threefold enhanced UV emission with large enhancement in the ratio of UV to green emission intensities. The faster photoresponse and enhanced photocurrent from the ZnO/anthracene heterostructure are explained on the basis of modification of surface defects and interfacial charge transfer process.

36 MATERIALS SCIENCE↗

Time-resolved x-ray photoelectron spectroscopy techniques for real-time studies of interfacial charge transfer dynamics

X-ray based spectroscopy techniques are particularly well suited to gain access to local oxidation states and electronic dynamics in complex systems with atomic pinpoint accuracy. Traditionally, these techniques are applied in a quasi-static fashion that usually highlights the steady-state properties of a system rather than the fast dynamics that often define the system function on a molecular level. Novel x-ray spectroscopy techniques enabled by free electron lasers (FELs) and synchrotron based pump-probe schemes provide the opportunity to monitor intramolecular and interfacial charge transfer processes in real-time and with element and chemical specificity. Two complementary time-domain xray photoelectron spectroscopy techniques are presented that are applied at the Linac Coherent Light Source (LCLS) and the Advanced Light Source (ALS) to study charge transfer processes in N3 dye-sensitized ZnO semiconductor nanocrystals, which are at the heart of emerging light-harvesting technologies.

36 MATERIALS SCIENCE↗

Förster resonant energy transfer from an inorganic quantum well to a molecular material: Unexplored aspects, losses, and implications to applications

A systematic investigation of Förster resonant energy transfer (FRET) is reported within a hybrid prototype structure based on nitride single quantum well (SQW) donors and light emitting polymer acceptors. Self-consistent Schrödinger-Poisson modeling and steady-state and time-resolved photoluminescence experiments were initially employed to investigate the influence of a wide structural parameter space on the emission quantum yield of the nitride component. The optimized SQW heterostructures were processed into hybrid structures with spin-casted overlayers of polyfluorenes. The influence of important unexplored aspects of the inorganic heterostructure such as SQW confinement, content, and doping on the dipole-dipole coupling was probed. Competing mechanisms to the FRET process associated with interfacial recombination and charge transfer have been studied and their implications to device applications exploiting FRET across heterointerfaces have been discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grain growth of nanocrystalline 3C-SiC under Au ion irradiation at elevated temperatures

Nanocrystalline silicon carbide (SiC) represents an excellent model system for a fundamental study of interfacial (grain boundary) processes under nuclear radiation, which are critical to the understanding of the response of nanostructured materials to high-dose irradiation. This study reports on a comparison of irradiation effects in cubic phase SiC (3C-SiC) grains of a few nanometers in size and single-crystal 3C-SiC films under identical Au ion irradiation to a range of doses at 700 K. In contrast to the latter, in which lattice disorder is accumulated to a saturation level without full amorphization, the average grain size of the former increases with dose following a power-law trend. In addition to coalescence, the grain grows through atomic jumps and mass transport, where irradiation induced vacancies at grain boundaries assist the processes. It is found that a higher irradiation temperature leads to slower grain growth and a faster approach to a saturation size of SiC nanograins. The results could potentially have a positive impact on structural components of advanced nuclear energy systems.

Environmental Molecular Sciences Laboratory↗

Automatic crack growth tracking of bimaterial interface cracks

The propagation process of an interfacial crack in composite material is studied using the modified maximum dilatational strain energy density criterion, NT-criterion. Some necessary assumptions have been adopted to facilitate the use of the NT-criterion in this case. The stress intensity factors at the crack tip are extracted from the complex displacement field and finite element results. A simple algorithm for automatic crack propagation is presented with an illustrative example.

Yehia, Nabil A. B.↗

Free convection in the Matian atmosphere

The 'free convective' regime for the Martian atmospheric boundary layer (ABL) was investigated. This state occurs when the mean windspeed at the top of the ABL drops below some critical value U(sub c) and positive buoyant forces are present. Such forces can arise either from vertical temperature or water vapor gradients across the atmospheric surface layer. During free convection, buoyant forces drive narrow plumes that ascend to the inversion height with a return circulation consisting of broad slower-moving downdraughts. Horizontal pressure, temperature, windspeed, and water vapor fluctuations resulting form this circulation pattern can be quite large adjacent to the ground (within the surface layer). The local turbulent fluctuations cause non-zero mean surface stresses, sensible heat fluxes, and latent heat fluxes, even when the mean regional windspeed is zero. Although motions above the surface layer are insensitive to the nature of the surface, the sensible and latent heat fluxes are primarily controlled by processes within the interfacial sublayer immediately adjacent to the ground during free convection. Thus the distinction between aerodynamically smooth and rough airflow within the interfacial sublayer is more important than for the more typical situation where the mean regional windspeed is greater than U(sub c). Buoyant forces associated with water vapor gradients are particularly large on Mars at low pressures and high temperatures when the surface relative humidity is 100 percent, enhancing the likelihood of free convection under these conditions. On this basis, Ingersol postulated the evaporative heat losses from an icy surface on Mars at 237 K and current pressures would exceed the available net radiative flux at the surface, thus prohibiting ice from melting at low atmospheric pressures. Schumann has developed equations describing the horizontal fluctuations and mean vertical gradients occurring during free convection. Schumann's model was generalized to include convection driven by water vapor gradients and to include the effects of circulation above both aerodynamically smooth and rough surfaces.

Clow, G. D.↗

Results from the assessment of COBRA-IE multidimensional flow capability with selected canonical problems

A systematic assessment of the capabilities of thermal-hydraulic codes such as RELAP5-3D and COBRA-IE to handle multi-dimensional flow is ongoing. The assessment is being performed in hierarchical fashion by isolating simple processes first and building complexity along the way. The first stage in the process has been to develop simple and fundamental canonical problems which challenge key aspects of the multidimensional flow process while removing other complex processes such as interfacial mass and heat transfer. Results of this work have been presented for RELAP5-3D at the NURETH-16 conference [1], [2], [3]. The purpose of this paper is to illustrate similar results obtained using COBRA-IE. The results are presented for two canonical problems. The first pertains to the simulation of Faraday waves (CP06) in an annulus. The second problem compares the solution of 2D single-phase, inviscid, frictionless, incompressible, irrotational flow (CP07) to the potential flow solution. Results from COBRA-IE are compared with similar results obtained with RELAP5-3D which were previously published in the 2015 NURETH papers series on this topic. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Optimization of Residual Stresses in MMC's through Process Parameter Control and the use of Heterogeneous Compensating/Compliant Interfacial Layers. OPTCOMP2 User's Guide

A user's guide for the computer program OPTCOMP2 is presented in this report. This program provides a capability to optimize the fabrication or service-induced residual stresses in unidirectional metal matrix composites subjected to combined thermomechanical axisymmetric loading by altering the processing history, as well as through the microstructural design of interfacial fiber coatings. The user specifies the initial architecture of the composite and the load history, with the constituent materials being elastic, plastic, viscoplastic, or as defined by the 'user-defined' constitutive model, in addition to the objective function and constraints, through a user-friendly data input interface. The optimization procedure is based on an efficient solution methodology for the inelastic response of a fiber/interface layer(s)/matrix concentric cylinder model where the interface layers can be either homogeneous or heterogeneous. The response of heterogeneous layers is modeled using Aboudi's three-dimensional method of cells micromechanics model. The commercial optimization package DOT is used for the nonlinear optimization problem. The solution methodology for the arbitrarily layered cylinder is based on the local-global stiffness matrix formulation and Mendelson's iterative technique of successive elastic solutions developed for elastoplastic boundary-value problems. The optimization algorithm employed in DOT is based on the method of feasible directions.

Pindera, Marek-Jerzy↗

Effect of Sound Waves on Decarburization Rate of Fe-C Melt

Sound waves have the ability to propagate through a gas phase and, thus, to supply the acoustic energy from a sound generator to materials being processed. This offers an attractive tool, for example, for controlling the rates of interfacial reactions in steelmaking processes. This study investigates the kinetics of decarburization in molten Fe-C alloys, the surface of which was exposed to sound waves and Ar-O{sub 2} gas blown onto the melt surface. The main emphasis is placed on clarifying effects of sound frequency, sound pressure, and gas flow rate. A series of water model experiments and numerical simulations are also performed to explain the results of high-temperature experiments and to elucidate the mechanism of sound wave application. This is explained by two phenomena that occur simultaneously: (1) turbulization of Ar-O{sub 2} gas flow by sound wave above the melt surface and (2) motion and agitation of the melt surface when exposed to sound wave. It is found that sound waves can both accelerate and inhibit the decarburization rate depending on the Ar-O{sub 2} gas flow rate and the presence of oxide film on the melt surface. The effect of sound waves is clearly observed only at higher sound pressures on resonance frequencies, which are defined by geometrical features of the experimental setup. The resonance phenomenon makes it difficult to separate the effect of sound frequency from that of sound pressure under the present experimental conditions.

36 MATERIALS SCIENCE↗

A new advanced experimental setup for in-depth study of the interfacial reaction during reactive wetting

Reactive wetting plays a crucial role in many technical processes, from soldering in microelectronics, production of metal/ceramic composites, to hot dip galvanizing in mass production of zinc coated steel sheet. In all these cases the wetting behavior of metal melts on different surfaces plays a crucial role in material joining and coating. In all these processes the formation of the interfacial reaction layer has to occur within as short a time as possible in order to ensure a fast overall production speed. As the interfacial layer determines the stability of the formed composites, detailed knowledge of its growth mechanisms is required for a directed process optimization. However, the investigation of the processes occurring at the buried interface between substrate and wetting phase is difficult, especially for the case of liquid metal wetting metallic or ceramic solid substrates at high temperatures. Here, a novel advanced technique for the investigation of high temperature wetting processes up to a temperature of 1100 K is presented. It is based on the sessile drop technique but, in addition, allows spinning off the droplet at any chosen wetting time, thus providing direct access to the interfacial reaction layer. Since the experimental setup is integrated into a UHV compatible reaction chamber, not only excellent control of the composition of the atmosphere is ensured, but also direct transfer to surface analytical tools such as scanning electron microscope or electron spectroscopy for chemical analysis without intermediate exposure to air is realized. As will be shown for the case of hot dip galvanising of steel, this is an outstanding advance compared to existing methods.

36 MATERIALS SCIENCE↗

Low-Cost, Large C-SiC Blisk Fabrication

C-SiC composites offer unique properties for propulsion applications. However, fabrication of low-cost, thick, large scale C-SiC disk for integrally bladed disk (blisk) applications has not been established yet. MER has demonstrated a new process to address this issue. Polymer-based processing was employed for interfacial coatings, consolidation and densification. Up to 40" O.C., 2" thick C-SiC composite processing was established, yielding in excess of 1.8 g/cu cm density. Computer tomography (CT) scans on the 40" O.D., 2" thick C-SiC disk showed no visible delamination, and good density uniformity. Stress-rupture testing in air was conducted at 2200 F, 2400 F and 2550 F.

Kowbel, W.↗