Search NASA⌕ Search

SEARCH · Search NASA

Results for “pattern detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Assessment of Localized Deformations in Sand Using X-Ray Computed Tomography

The internal fabric and localized deformation patterns of triaxial sand specimens were investigated using Computed Tomography (CT). Three displacement-controlled, conventional, drained axisymmetric (triaxial) experiments were conducted on dry Ottawa sand specimens at very low effective confining stresses (0.05, 0.52, and 1.30 kPa) in a microgravity environment aboard the Space Shuttle during the NASA STS-79 mission. CT scanning was p'erformed on these flight specimens, as well as on an uncompressed specimen and a specimen tested in a terrestrial laboratory at 1.30 kPa effective confining stress. CT demonstrated high accuracy in detecting specimen inhomogeneity and localization patterns. Formation of deformation patterns is dependent on the effective confining stress and gravity. Multiple symmetrical radial shear bands were observed in the specimens tested in a microgravity environment. In the axial direction, two major conical surfaces were developed. Nonsymmetrical spatial deformation was observed in the 1-G specimen. Analysis tools were developed to quantify the spatial density change. Void ratio variation within and outside the shear bands was calculated and discussed.

Alshibli, Khalid A↗

Capturing Complex Multivariate Time Series Interactions to Detect High-Risk Adverse Events During Flight

The reduction of aviation safety metrics below target thresholds continue to drive down the number of aviation fatalities and accidents. To meet future safety demands, sustained efforts by aviation agencies promoting safety assurance processes and systems have prompted ongoing research on identifying and mitigating in-flight risks. With the projected increase in passenger load factor and rollout of more autonomous systems into the national airspace, the need to detect high-risk events in-time or ahead-of-time is becoming increasingly crucial. New anomaly detection and precursor identification algorithms will need to scale to different airframes, levels of autonomy, and system complexity. While the pervasiveness of deep learning has resulted in the development of performant anomaly detection methods, these sophisticated models currently suffer from low end-user interpretability. Building off our previous work on identifying adverse events in multivariate flight data during descent, we propose a data-driven approach for detecting in-flight adverse events caused by the complex interplay of flight variables. Our approach utilizes ordinal patterns of important aircraft stability variables (e.g., airspeed and descent rate) to capture multivariate flight dynamics that can be used to predict the onset of unstable approaches, a high-risk adverse event that can occur during approach. Through the use of ordinal patterns, we aim to create more interpretable detection models of in-flight adverse events that can be translated to future autonomous systems without difficulty. Our analysis shows the presence of distinct ordinal pattern distributions that can be used to predict unstable approaches 1 minute ahead of time with an accuracy of 0.69 and a recall of 0.73 and 30 seconds ahead with an accuracy of 0.70 and a recall of 0.86.

Risk detection↗

Capturing Multivariate Time Series Interactions to Detect High‑Risk Instability During Approach

The reduction of aviation safety metrics below target thresholds continue to drive down the number of aviation fatalities and accidents. To meet future safety demands, sustained efforts by aviation agencies promoting safety assurance processes and systems have prompted ongoing research on identifying and mitigating in-flight risks. With the projected increase in passenger load factor and rollout of more autonomous systems into the national airspace, the need to detect high-risk events in-time or ahead-of-time is becoming increasingly crucial. New anomaly detection and precursor identification algorithms will need to scale to different airframes, levels of autonomy, and system complexity. While the pervasiveness of deep learning has resulted in the development of performant anomaly detection methods, these sophisticated models currently suffer from low end-user interpretability. Building off our previous work on identifying adverse events in multivariate flight data during descent, we propose a data-driven approach for detecting in-flight adverse events caused by the complex interplay of flight variables. Our approach utilizes ordinal patterns of important aircraft stability variables (e.g., airspeed and descent rate) to capture multivariate flight dynamics that can be used to predict the onset of unstable approaches, a high-risk adverse event that can occur during approach. Through the use of ordinal patterns, we aim to create more interpretable detection models of in-flight adverse events that can be translated to future autonomous systems without difficulty. Our analysis shows the presence of distinct ordinal pattern distributions that can be used to predict unstable approaches 1 minute ahead of time with an accuracy of 0.69 and a recall of 0.73 and 30 seconds ahead with an accuracy of 0.70 and a recall of 0.86.

Risk detection↗

Anomalous Cases of Astronaut Helmet Detection

An astronaut's helmet is an invariant, rigid image element that is well suited for identification and tracking using current machine vision technology. Future space exploration will benefit from the development of astronaut detection software for search and rescue missions based on EVA helmet identification. However, helmets are solid white, except for metal brackets to attach accessories such as supplementary lights. We compared the performance of a widely used machine vision pipeline on a standard-issue NASA helmet with and without affixed experimental feature-rich patterns. Performance on the patterned helmet was far more robust. We found that four different feature-rich patterns are sufficient to identify a helmet and determine orientation as it is rotated about the yaw, pitch, and roll axes. During helmet rotation the field of view changes to frames containing parts of two or more feature-rich patterns. We took reference images in these locations to fill in detection gaps. These multiple feature-rich patterns references added substantial benefit to detection, however, they generated the majority of the anomalous cases. In these few instances, our algorithm keys in on one feature-rich pattern of the multiple feature-rich pattern reference and makes an incorrect prediction of the location of the other feature-rich patterns. We describe and make recommendations on ways to mitigate anomalous cases in which detection of one or more feature-rich patterns fails. While the number of cases is only a small percentage of the tested helmet orientations, they illustrate important design considerations for future spacesuits. In addition to our four successful feature-rich patterns, we present unsuccessful patterns and discuss the cause of their poor performance from a machine vision perspective. Future helmets designed with these considerations will enable automated astronaut detection and thereby enhance mission operations and extraterrestrial search and rescue.

Dolph, Chester↗

CADAT test pattern generator

CADAT test pattern generator (TPG) aids in checkout, fault detection, and fault isolation of complex digital circuits. Time and effort of manually generating digital test patterns can be major limiting factor in effectively utilizing automatic testing. This time and effort are reduced from several months to several days by TPG.

Source record↗

Ultrasonic Nondestructive Evaluation Techniques Applied to the Quantitative Characterization of Textile Composite Materials

In this Progress Report, we describe our recent developments of advanced ultrasonic nondestructive evaluation methods applied to the characterization of anisotropic materials. We present images obtained from experimental measurements of ultrasonic diffraction patterns for a thin woven composite in an immersion setup. In addition, we compare apparent signal loss measurements of the thin woven composite for phase-sensitive and phase-insensitive detection methods. All images of diffraction patterns have been included on the accompanying CD-ROM in the Adobe(Trademark) Portable Document Format (PDF). Due to the extensive amount of data, however, hardcopies of only a small representative selection of the images are included within the printed report. This Progress Report presents experimental results that support successful implementation of single element as well as one and two-dimensional ultrasonic array technologies for the inspection of textile composite structures. In our previous reports, we have addressed issues regarding beam profiles of ultrasonic pressure fields transmitted through a water reference path and transmitted through a thin woven composite sample path. Furthermore, we presented experimental results of the effect of a thin woven composite on the magnitude of an insonifying ultrasonic pressure field. In addition to the study of ultrasonic beam profiles, we consider issues relevant to the application of single-element, one-dimensional, and two-dimensional array technologies towards probing the mechanical properties of advanced engineering composites and structures. We provide comparisons between phase-sensitive and phase-insensitive detection methods for determination of textile composite structure parameters. We also compare phase-sensitive and phase-insensitive - - ---- ----- apparent signal loss measurements in an effort to study the phenomenon of phase cancellation at the face of a finite-aperture single-element receiver. Furthermore, in this Progress Report we extend our work on ultrasonic beam profile issues through investigation of the phase fronts of the pressure field. In Section H of this Progress Report we briefly describe the experimental arrangement and methods for data acquisition of the ultrasonic diffraction patterns upon transmission through a thin woven composite. Section III details the analysis of the experimental data followed by the experimental results in Section IV. Finally, a discussion of the observations and conclusions is found in Section V.

Miller, James G.↗

Remote Sensing of Water Pollution

Remote sensing, as a tool to aid in the control of water pollution, offers a means of making rapid, economical surveys of areas that are relatively inaccessible on the ground. At the same time, it offers the only practical means of mapping pollution patterns that cover large areas. Detection of oil slicks, thermal pollution, sewage, and algae are discussed.

White, P. G.↗

Surface roughness measured by optical signatures

To measure roughness of metal surfaces by nondestructive means direct laser beam at surface and record distribution pattern of intensity of reflected light to obtain optical signature for comparison with calibrated surface. Signature of machined surface with scratch compared to that of regularly-patterned machined surface may also detect imperfections.

Salvinski, R. J.↗

Volcanic activity and satellite-detected thermal anomalies at Central American volcanoes

The author has identified the following significant results. A large nuee ardente eruption occurred at Santiaguito volcano, within the test area on 16 September 1973. Through a system of local observers, the eruption has been described, reported to the international scientific community, extent of affected area mapped, and the new ash sampled. A more extensive report on this event will be prepared. The eruption is an excellent example of the kind of volcanic situation in which satellite thermal imagery might be useful. The Santiaguito dome is a complex mass with a whole series of historically active vents. It's location makes access difficult, yet its activity is of great concern to large agricultural populations who live downslope. Santiaguito has produced a number of large eruptions with little apparent warning. In the earlier ground survey large thermal anomalies were identified at Santiaguito. There is no way of knowing whether satellite monitoring could have detected changes in thermal anomaly patterns related to this recent event, but the position of thermal anomalies on Santiaguito and any changes in their character would be relevant information.

Stoiber, R. E.↗

Multipurpose Photonic Transducers

Features include smallness and noise immunity. Photonic transducer is interferometer with two arms. Small relative axial motions of mirrors detected as shifts in interference pattern. Version measures temperature changes via differential expansion or contraction of stalks. New transducers smaller (typical size less than 1 cm) and coupled to monitoring equipment with optical fibers instead of wires. Well suited to biomedical instrumentation.

Du Fresne, E. R.↗

Goldstone field test activities: Sky survey

The goals are to conduct a research and development program aimed at determining the most effective way to do SETI within the constraints of current technology and estimated budgets. The general search strategy adopted is that which is recommended by the SETI Science Working Group. The strategy for an all sky survey for SETI was further developed over the last year. Scan patterns, scan rates, and signal detection algorithms were developed. Spectral power measurement instrumentation was tested at the Venus Station of the Goldstone Deep Space Communication Complex. A specially designed radio frequency interference (RFI) measurement system was built and installed at the Venus Station. A data base management system for storage and retrieval of the RFI data was partially implemented on a VAX 750 computer at the Jet Propulsion Laboratory.

Gulkis, S.↗

Applications of satellite image processing to the analysis of Amazonian cultural ecology

This paper examines the application of satellite image processing towards identifying and comparing resource exploitation among indigenous Amazonian peoples. The use of statistical and heuristic procedures for developing land cover/land use classifications from Thematic Mapper satellite imagery will be discussed along with actual results from studies of relatively small (100 - 200 people) settlements. Preliminary research indicates that analysis of satellite imagery holds great potential for measuring agricultural intensification, comparing rates of tropical deforestation, and detecting changes in resource utilization patterns over time.

Behrens, Clifford A.↗

Effects of Weightlessness on Vestibular Development of Quail

The lack of gravity is known to alter vestibular responses in developing and adult vertebrates. One cause of these altered responses may be changes in the connections between the vestibular receptor and the brain. Therefore we propose to investigate the effects of gravity on the formations of connections between the gravity receptors of the ear and the brain in developing quail incubated in space beginning at an age before these connections are established (incubation day three) until near the time of hatching, when they are to some extent functional. This investigation will make use of a novel technique, the diffusion of a lipophilic dye, DiI, in fixed tissue. This technique can thus be used to analyze the connections in specimens fixed in orbit, thus eliminating changes due to the earth's gravity. The evaluation of the data will enable us to detect gross deviations from normal patterns as well as detailed quantitative deviations.

Fritzsch, Bernd↗

One-Dimensional Scanning Approach to Shock Sensing

Measurement tools for high speed air flow are sought both in industry and academia. Particular interest is shown in air flows that exhibit aerodynamic shocks. Shocks are accompanied by sudden changes in density, pressure, and temperature. Optical detection and characterization of such shocks can be difficult because the medium is normally transparent air. A variety of techniques to analyze these flows are available, but they often require large windows and optical components as in the case of Schlieren measurements and/or large operating powers which precludes their use for in-flight monitoring and applications. The one-dimensional scanning approach in this work is a compact low power technique that can be used to non-intrusively detect shocks. The shock is detected by analyzing the optical pattern generated by a small diameter laser beam as it passes through the shock. The optical properties of a shock result in diffraction and spreading of the beam as well as interference fringes. To investigate the feasibility of this technique a shock is simulated by a 426 m diameter optical fiber. Analysis of results revealed a direct correlation between the optical fiber or shock location and the beam s diffraction pattern. A plot of the width of the diffraction pattern vs. optical fiber location reveals that the width of the diffraction pattern was maximized when the laser beam is directed at the center of the optical fiber. This work indicates that the one-dimensional scanning approach may be able to determine the location of an actual shock. Near and far field effects associated with a small diameter laser beam striking an optical fiber used as a simulated shock are investigated allowing a proper one-dimensional scanning beam technique.

Tokars, Roger↗

VSLAM and Coplanar POSIT for Advanced Air Mobility Approach and Landing

Advanced Air Mobility (AAM) aircraft have many challenges for landing accurately and safely in urban, suburban, and rural environments. Localization in large and open rural environments could utilize GPS, but AAM aircraft in urban environments will encounter GPS degradation. Another challenge involves flight operation time, i.e., flying during the day or at night. There are different types of guidelines and landmarks at runways, heliports, and vertiports for daytime and nighttime applications. Tailoring feature detection methods for AAM approach and landing during the day and night pose different issues and challenges. It is easier to detect edges, lines, and other runway markers during the day than at night. Conversely, it is easier to detect landing light configurations and patterns at nighttime than daytime. Consequently, utilizing the same feature detector for daytime and nighttime operations may not be feasible. This paper focuses on vision-based precision approach and landing (PAL) and builds on previous work by comparing ORB SLAM, custom VSLAM, and coplanar pose from orthography and scaling with iterations (POSIT) for daytime and nighttime operations. Implementing high fidelity simulations with computer graphics and extracting video frames from flight test data provide promising results for AAM PAL applications.

Evan Kawamura↗

Using airborne and DESIS imaging spectroscopy to map plant diversity across the largest contiguous tract of tallgrass prairie on earth

Grassland ecosystems are under threat globally, primarily due to land-use and land-cover changes that have adversely affected their biodiversity. Given the negative ecological impacts of biodiversity loss in grasslands, there is an urgent need for developing an operational biodiversity monitoring system that functions in these ecosystems. In this paper, we assessed the capability of airborne and spaceborne imaging spectroscopy (also known as hyperspectral imaging) to capture plant α-diversity in a large naturally-assembled grassland while considering the impact of common management practices, specifically prescribed fire. We collected a robust in-situ plant diversity data set, including species composition and percent cover from 2500 sampling points with different burn ages, from recently-burned to transitional and pre-prescribed fire at the Joseph H. Williams Tallgrass Prairie Preserve in Oklahoma, USA. We expressed in-situ plant α-diversity using the first three Hill numbers, including species richness (number of observed species in a plant community), exponential Shannon entropy index (hereafter Shannon diversity; effective number of common species, where species are weighed proportional to their percent cover), and inverse Simpson concentration index (hereafter Simpson diversity; effective number of dominant species, where more weight is given to dominant species) at four different plot sizes, including 60 m × 60 m, 120 m × 120 m, 180 m × 180 m, and 240 m × 240 m. We collected full-range airborne hyperspectral data with fine spatial resolution (1 m) and visible and near-infrared spaceborne hyperspectral data from DESIS sensor with coarse spatial resolution (30 m), and used the spectral diversity hypothesis—i.e., that the variability in spectral data is largely driven by plant diversity—to estimate α-diversity remotely. In recently-burned plots and those at the transitional stage, both airborne and spaceborne data were capable of capturing Simpson diversity—a metric that calculates the effective number of dominant species by emphasizing abundant species and discounting rare species—but not species richness or Shannon diversity. Further, neither airborne nor spaceborne hyperspectral data sets were capable of capturing plant α-diversity of 60 m × 60 m or 120 m × 120 m plots. Based on these results, three main findings emerged: (1) management practices influence grassland biodiversity patterns that can be remotely detected, (2) both fine- and coarse-resolution remotely-sensed data can detect the effective number of dominant species (e.g., Simpson diversity), and (3) attention should be given to site-specific plant diversity field data collection to appropriately interpret remote sensing results. Findings of this study indicate the feasibility of estimating Simpson diversity in naturally-assembled grasslands using forthcoming spaceborne imagers such as National Aeronautics and Space Administration's Surface Biology and Geology mission.

Hamed Gholizadeh↗

A study of the early detection of insect infestations and density/distribution of host plants

The author has identified the following significant results. With comparative observations of film types and seasonal influences on reflectance characteristics, many crop varieties can be identified. This study shows that citrus, sugar cane, brush, some winter vegetables, and grain crops could be identified. Vegetative patterns in border areas can be detected. This information can be useful in detecting avenues of entry of pest species and areas of stress that require vigilance in stopping the spread of destructive species. Influence of some environmental factors on crops that may be confused with pest injury, or related factors, can be detected and identified with Skylab data (S-190B).

Hart, W. G.↗