Search NASASearch

SEARCH · Search NASA

Results for “regularization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Optimal guidance law development for an advanced launch system

The objective of this research effort was to develop a real-time guidance approach for launch vehicles ascent to orbit injection. Various analytical approaches combined with a variety of model order and model complexity reduction have been investigated. Singular perturbation methods were first attempted and found to be unsatisfactory. The second approach based on regular perturbation analysis was subsequently investigated. It also fails because the aerodynamic effects (ignored in the zero order solution) are too large to be treated as perturbations. Therefore, the study demonstrates that perturbation methods alone (both regular and singular perturbations) are inadequate for use in developing a guidance algorithm for the atmospheric flight phase of a launch vehicle. During a second phase of the research effort, a hybrid analytic/numerical approach was developed and evaluated. The approach combines the numerical methods of collocation and the analytical method of regular perturbations. The concept of choosing intelligent interpolating functions is also introduced. Regular perturbation analysis allows the use of a crude representation for the collocation solution, and intelligent interpolating functions further reduce the number of elements without sacrificing the approximation accuracy. As a result, the combined method forms a powerful tool for solving real-time optimal control problems. Details of the approach are illustrated in a fourth order nonlinear example. The hybrid approach is then applied to the launch vehicle problem. The collocation solution is derived from a bilinear tangent steering law, and results in a guidance solution for the entire flight regime that includes both atmospheric and exoatmospheric flight phases.

Calise, Anthony J.

Echo mapping of active galactic nuclei broad-line regions: Fundamental algorithms

We formulate and test a series of algorithms for echo mapping the emission-line regions near active galactic nuclei from measurements of correlated variability in their line and continuum light curves. The linear regularization method (LRM) employs a direct inversion of evenly spaced light-curve data, with a regularization parameter that can be used to control the trade-off between noise and resolution. Matrix formulas express the formal solution as well as its variance and covariance in terms of uncertainties in the measurements. Unlike the maximum-entropy method (MEM), LRM applies to kernels with both positive and negative values, but the results are somewhat limited by ringing effects. A positivity constraint proves effective in controlling the ringing. MEM combines regularization and positivity in a natural way, but similar results are also found using positivity constraints with nonentropic regularization functions. Direct inversions of unevenly sampled light curves require interpolating the noisy data. In this case better results are found by solving for both the continuum light curve and kernel function in a simultaneous fit to the data. Our conclusion is that while echo mapping currently gives ambiguous results, the algorithms are not the limiting factor. Progress depends on efforts to increase the accuracy and completeness of sampling of the observed light curves.

Vio, Roberto

Some Operational Aspects of the International Two-Way Satellite Time and Frequency Transfer (TWSTFT) Experiment Using INTELSAT Satellites at 307 Degrees East

Eight laboratories are participating in an international two-way satellite time and frequency transfer (TWSTFT) experiment. Regular time and frequency transfers have been performed over a period of almost two years, including both European and transatlantic time transfers. The performance of the regular TWSTFT sessions over an extended period has demonstrated conclusively the usefulness of the TWSTFT method for routine international time and frequency comparisons. Regular measurements are performed three times per week resulting in a regular but unevenly spaced data set. A method is presented that allows an estimate of the values of delta (sub y)(gamma) to be formed from these data. In order to maximize efficient use of paid satellite time an investigation to determine the optimal length of a single TWSTFT session is presented. The optimal experiment length is determined by evaluating how long white phase modulation (PM) instabilities are the dominant noise source during the typical 300-second sampling times currently used. A detailed investigation of the frequency transfers realized via the transatlantic TWSTFT links UTC(USNO)-UTC(NPL), UTC(USNO)-UTC(PTB), and UTC(PTB)-UTC(NPL) is presented. The investigation focuses on the frequency instabilities realized, a three cornered hat resolution of the delta (sub y) (gamma) values, and a comparison of the transatlantic and inter-European determination of UTC(PTB)-UTC(NPL). Future directions of this TWSTFT experiment are outlined.

DeYoung, J. A.

Psychoacoustic Testing of Modulated Blade Spacing for Main Rotors

Psychoacoustic testing of simulated helicopter main rotor noise is described, and the subjective results are presented. The objective of these tests was to evaluate the potential acoustic benefits of main rotors with modulated (uneven) blade spacing. Sound simulations were prepared for six main rotor configurations. A baseline 4-blade main rotor with regular blade spacing was based on the Bell Model 427 helicopter. A 5-blade main rotor with regular spacing was designed to approximate the performance of the 427, but at reduced tipspeed. Four modulated rotors - one with "optimum" spacing and three alternate configurations - were derived from the 5 bladed regular spacing rotor. The sounds were played to 2 subjects at a time, with care being taken in the speaker selection and placement to ensure that the sounds were identical for each subject. A total of 40 subjects participated. For each rotor configuration, the listeners were asked to evaluate the sounds in terms of noisiness. The test results indicate little to no "annoyance" benefit for the modulated blade spacing. In general, the subjects preferred the sound of the 5-blade regular spaced rotor over any of the modulated ones. A conclusion is that modulated blade spacing is not a promising design feature to reduce the annoyance for helicopter main rotors.

Edwards, Bryan

Making Carbon-Nanotube Arrays Using Block Copolymers: Part 2

Some changes have been incorporated into a proposed method of manufacturing regular arrays of precisely sized, shaped, positioned, and oriented carbon nanotubes. Such arrays could be useful as mechanical resonators for signal filters and oscillators, and as electrophoretic filters for use in biochemical assays. A prior version of the method was described in Block Copolymers as Templates for Arrays of Carbon Nanotubes, (NPO-30240), NASA Tech Briefs, Vol. 27, No. 4 (April 2003), page 56. To recapitulate from that article: As in other previously reported methods, carbon nanotubes would be formed by decomposition of carbon-containing gases over nanometer-sized catalytic metal particles that had been deposited on suitable substrates. Unlike in other previously reported methods, the catalytic metal particles would not be so randomly and densely distributed as to give rise to thick, irregular mats of nanotubes with a variety of lengths, diameters, and orientations. Instead, in order to obtain regular arrays of spaced-apart carbon nanotubes as nearly identical as possible, the catalytic metal particles would be formed in predetermined regular patterns with precise spacings. The regularity of the arrays would be ensured by the use of nanostructured templates made of block copolymers.

Bronikowski, Michael

Applications of the Kustaanheimo-Stieffel transformation of the perturbed two-body problem

The Newtonian differential equations of motion for the two-body problem can be transformed into four linear harmonic-oscillator equations by simultaneously applying the regularization step dt/ds = r and the Kustaanheimo-Stieffel (KS) transformation. The regularization step changes the independent variable from time to a new variable s, and the KS transformation transforms the position and velocity vectors from Cartesian space into a four-dimensional space. A derivation of a uniform, regular solution for the perturbed two-body problem in the four-dimensional space is presented. The variation-of-parameters technique is used to develop expressions for the derivatives of ten elements (which are constants in the unperturbed motion) for the general case that includes both perturbations which can arise from a potential and perturbations which cannot be derived from a potential. This ten-element solution has mixed secular terms that degrade the long-term accuracy during numerical integration. Therefore, to eliminate these terms, the solution is modified by introducing two additional elements.

Bond, V. R.

Processing eutectics in space

The examination of the Ni-Mo-Al system is discussed. Experiments were performed to examine the role of thermal gradient magnitude at the solidifying interface on the geometrical regularity of the microstructure. The difficulty in measuring the thermal gradient in the melt using superheat temperatures as high as 1800 C resulted in the examination of three liquid temperature gradient ranges. Examination of the microstructure from directionally solidified ingots using transverse sections indicated that the highest gradient runs produced microstructure of no greater regularity than runs made at lower gradients. For the Ni-Al-Mo monovariant eutectic system, the magnitude of the thermal gradient at the solidifying interface is not a controlling parameter with respect to the geometrical regularity of the microstructure, provided it is sufficient to satisfy the gradient/rate ratio needed to produce a planar interface growth.

Douglas, F. C.

Markov information sources

A regular Markov source is defined as the output of a deterministic, but noisy, channel driven by the state sequence of a regular finite-state Markov chain. The rate of such a source is the per letter uncertainty of its digits. The well-known result that the rate of a unifilar regular Markov source is easily calculable is demonstrated, where unifilarity means that the present state of the Markov chain and the next output of the deterministic channel uniquely determine the next state. At present, there is no known method to calculate the rate of a nonunifilar source. Two tentative approaches to this unsolved problem are given, namely source identical twins and the master-slave source, which appear to shed some light on the question of rate calculation for a nonunifilar source.

Massey, J. L.

A search for a general gradient in the solar wind speed at low solar latitudes

Long-term averages of solar-wind-speed data obtained in the ecliptic plane from July 1964 through December 1975 have been examined for a regular variation in flow speed associated with earth's yearly excursion to latitudes of plus or minus 7.25 deg about the solar equator. Regular speed modulations of about 70 km/s peaking at the highest latitudes are discernible from mid-1964 through 1966 and from early 1969 to early 1971. During the remainder of this 11.5-year interval, the modulations in speed seem to be aperiodic. A superposed epoch analysis of all the data fails to reveal a general solar latitude gradient in the solar-wind flow for these 11.5 years. It is concluded that with near-earth observations, a latitude dependence of the flow speed is too small to be detected on a regular basis against a background 'noise' of solar-wind streams, which vary in longitude, latitude, and time.

Bame, S. J.

The angular distribution of infrared radiances emerging from broken fields of cumulus clouds

Infrared radiances were simultaneously measured from broken cloud fields over the eastern Pacific Ocean by means of the eastern and western geostationary satellites. The measurements were compared with the results of models that characterized the clouds as black circular cylinders disposed randomly on a plane and as black cuboids disposed in regular and in shifted periodic arrays. The data were also compared with the results obtained from a radiative transfer model that considered emission and scattering by a regular array of periodic cuboidal clouds. It was found that the radiances did not depend significantly on the azimuth angle; this suggested that the observed cloud fields were not regular periodic arrays. However, the dependence on zenith angle suggested that the clouds were not disposed randomly either. The implication of these measurements on the understanding of the transfer of infrared radiances through broken cloud fields is considered.

Naber, P. S.

Evaluation of VSAERO in prediction of aerodynamic characteristics of helicopter hub fairings

A low-order panel code, VSAERO, was used to predict the aerodynamic characteristics of helicopter hub fairings. Since the simulation of this kind of bluff body by VSAERO was not documented before, the VSAERO solutions were correlated with experimental data to establish their validity. The validation process revealed that simulation of the aerodynamic environment around a hub fairing was sensitive to several modeling parameters. Some of these parameters are body and wake panels arrangement, streamwise and spanwise separation location, and the most prominent one-the wake modeling. Three wake models were used: regular wake, separated wake, and jet model. The regular wake is a wake with negligible thickness (thin wake). It is represented by a single vortex sheet. The separated wake and the jet model in the present application are wakes with finite thickness (thick wake). They consist of a vortex sheet enclosing a region of low-energy flow. The results obtained with the reqular wake were marginally acceptable for sharp-edged hub fairings. For all other cases under consideration, the jet model results correlated slightly better. The separated wake, which seemed to be the most appropriate model, caused the solution to diverge. While the regular wake was straight-forward to apply in simulations, the jet model was not. It requires the user to provide information about the doublet strength gradient on wake panels by guessing the efflux velocities at the wake shedding location. In summary, VSAERO neither predicts accurately the aerodynamic characteristics of helicopter hub fairings nor was cost effective.

Louie, Alexander

Neptune's story

It is conjectured that Triton was captured from a heliocentric orbit as the result of a collision with what was then one of Neptune's regular satellites. The immediate post-capture orbit was highly eccentric. Dissipation due to tides raised by Neptune in Triton caused Triton's orbit to evolve to its present state in less than one billion years. For much of this time Triton was almost entirely molten. While its orbit was evolving, Triton cannibalized most of the regular satellites of Neptune and also perturbed Nereid, thus accounting for that satellite's highly eccentric and inclined orbit. The only regular satellites of Neptune that survived were those that formed well within 5 Neptune radii, and they move on inclined orbits as the result of chaotic perturbations forced by Triton.

Goldreich, P.

An algorithm for computing the distance spectrum of trellis codes

A class of quasiregular codes is defined for which the distance spectrum can be calculated from the codeword corresponding to the all-zero information sequence. Convolutional codes and regular codes are both quasiregular, as well as most of the best known trellis codes. An algorithm to compute the distance spectrum of linear, regular, and quasiregular trellis codes is presented. In particular, it can calculate the weight spectrum of convolutional (linear trellis) codes and the distance spectrum of most of the best known trellis codes. The codes do not have to be linear or regular, and the signals do not have to be used with equal probabilities. The algorithm is derived from a bidirectional stack algorithm, although it could also be based on the Viterbi algorithm. The algorithm is used to calculate the beginning of the distance spectrum of some of the best known trellis codes and to compute tight estimates on the first-event-error probability and on the bit-error probability.

Rouanne, Marc

Upper semicontinuous global attractors for viscous flow

A particular form of regularization of the Navier-Stokes equations is studied. It is shown that as the regularization parameter goes to zero, the global attractor for the regularized system converges to the global attractor for the conventional Navier-Stokes system.

Ou, Yuh-Roung

Vision science and technology for supervised intelligent space robots

The focus of recent work in robotic vision for application in intelligent space robots such as the Extravehicular Activity (EVA) Retriever is in visual function, that is, how information about the space world is derived and then conveyed to cognition. The goal of this work in visual function is first to understand how the relevant structure of the surrounding world is evidenced by regularities among the pixels of images, then to understand how these regularities are mapped on the premises that form the primitive elements of cognition, and then to apply these understandings with the elements of visual processing (algorithms) and visual mechanism (machine organization) to intelligent space robot simulations and test beds. Since visual perception is the process of recognizing regularities in images that are known on the basis of a model of the world to be reliable related to causal structure in the environment (because perception attaches meaning to the link between a conception of the environment and the objective environment), the work involves understanding generic, generally applicable models of world structure (not merely objects) and how that structure evidences itself in images.

Erickson, Jon D.

Nonlinear control via approximate input-output linearization - The ball and beam example

This paper presents an approach for the approximate input-output linearization of nonlinear systems, particularly those for which relative degree is not well defined. It is shown that there is a great deal of freedom in the selection of an approximation and that, by designing a tracking controller based on the approximating system, tracking of reasonable trajectories can be achieved with small error. The approximating system is itself a nonlinear system, with the difference that it is input-output linearizable by state feedback. Some properties of the accuracy of the approximation are demonstrated and, in the context of the ball and beam example, it is shown to be far superior to the Jacobian approximation. The results are focused on finding regular SISO systems which are close to systems which are not regular and controlling these approximate regular systems.

Hauser, John

Attenuation of human carotid-cardiac vagal baroreflex responses after physical detraining

Astronauts who are occupied with prelaunch schedules may have to limit their regular physical exercise routines. To assess a potential effect on blood pressure control, carotid baroreceptor-cardiac reflex responses of 16 men were evaluated before and after two weeks of exercise detraining that followed ten weeks of regular scheduled exercise (30 min/d, 4 d/week at 75 percent V(O2) max). After detraining, the baroreflex stimulus-response relationship had a reduced slope 0.4 msec/mmHg and range of response. In addition, there was a resetting of the relationship on the R-R interval axis. Both the minimum and maximum R-R interval responses to the stimulus were significantly reduced after detraining. Baseline systolic pressure did not change with detraining, and the carotid baroreceptor-cardiac response relationship did not shift on the pressure axis. These results suggest that detraining from regular exercise can compromise vagally-mediated mechanisms of blood pressure regulation.

Convertino, Victor A.

Small-scale fracture patterns on the volcanic plains of Venus

Linear features with a regular spacing of about 1 km in the gridded plains of Guinevere Planitia observed in Magellan radar images of Venus are examined. Many sets of parallel, regularly spaced lineations similar to the closely spaced features of the gridded plains were found. These sets of parallel lineations, which are interpreted to be fractures, typically cover areas with dimensions of hundreds of kilometers. Several examples of these regular lineations are characterized in terms of their average fracture spacing, which is between 1 and 2.5 km; the scatter in individual spacings is about +/- 1/3 the average. It is hypothesized that these features are extension fractures in the brittle upper layers of the volcanic plains material, which formed well after emplacement and solidification of the flows.

Banerdt, W. B.