Search NASA⌕ Search

SEARCH · Search NASA

Results for “stills”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: radiation-induced omega phase transformation in Ti-6Al-4V

A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at the beam center region with an irradiation temperature around 120 oC. Tensile tests showed increased hardness and a large decrease in ductility for the dual a+ß-phase Ti-6Al-4V Grade-5 and Grade-23 extra low interstitial alloys, with the near a-phase Ti-3Al-2.5V Grade-9 alloy still exhibiting uniform elongation of a few % after irradiation. Transmission Electron Microscope analyses on Ti-6Al-4V indicated clear evidence of a high-density of defect clusters with size less than 2 nm in each a-phase grain. The ß-phase grains did not contain any visible defects such as loops or black dots, while the diffraction patterns clearly indicated ?-phase precipitation in an advanced formation stage. The radiation-induced ?-phase transformation in the ß-phase could lead to greater loss of ductility in Ti-6Al-4V alloys in comparison with Ti-3Al-2.5V alloy with less ß-phase.google scho

Tensile Test, titanium, acclerator, proton beam↗
DOE OSTI2021

Phase-field simulations of fission gas bubbles in high burnup UO2 during steady-state and LOCA transient conditions

To improve the economics of commercial nuclear energy generation, U.S. utilities are currently seeking licensing approval to operate UO2 fuel to higher burnups. One significant safety issue that must be addressed to obtain approval is the potential for fine fragmentation/pulverization of the fuel during a loss-of-coolant accident (LOCA). It has been hypothesized this is caused by the rapid increase of pressure in fission gas bubbles in the high burnup region of the fuel. To better understand this phenomenon, a novel phase-field model of the fission gas bubble microstructure in UO2 has been developed and implemented in Idaho National Laboratory's Marmot application for phase-field simulation of nuclear materials. Simulations of bubble growth in the high burnup region during steady-state conditions showed that initially overpressurized bubbles decreased in pressure during growth, but still remained above equilibrium pressure. During a LOCA transient, simulations of bubbles in the high burnup region showed that bubble size did not change significantly, and the pressure increase due to the transient was calculated and passed to a phase-field model of fracture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Porosity evolution in proton irradiated microfine-grained POCO graphite

This work investigated the porosity evolution of POCO ZXF-5Q graphite that has been irradiated by 340 kW, 120 GeV protons inside NT02 target system in Fermilab's NuMI beamline. This POCO graphite has undergone direct bulk dimensional swelling at low dose irradiation and its local microstructural change is still not well-understood during this process. In this work, the (sub-) micrometre scale porosity from six locations across proton beam fluence and temperature gradients have been studied using focused ion beam-scanning electron microscopy (FIB-SEM) tomography. Here, a deep learning-based tomographic image segmentation technique has been established and implemented for porosity segmentation and quantification. It has been found that there is a decrease in the total volumetric percentage of the porosity at proton beam centre (~ 8 – 8.4 vol.%), by comparing to un-irradiated POCO (~ 12 – 13vol.%) and to beam 2σ and 5σ radii (~ 12vol.%). This decrease in porosity volume percentage was found to be caused by the reduction in pores with volumes > 0.1 μm 3 induced by material bulk dimensional swelling at proton beam centre area. The porosity reduction in relation to dimensional change and irradiation creep was discussed among with other contributing factors, and further investigations through well-controlled irradiation experiment are still needed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Trace levels of PtRu on NiMo foam electrodes towards hydrogen evolution reaction

Electrochemical water splitting plays a critical role in high purity hydrogen production. To lower capital cost and energy consumption, efficient catalysts are required to boost the hydrogen evolution reaction (HER), especially in alkaline media. Although PtRu alloy materials are still considered the state-of-the-art catalyst for the HER under alkaline media, large-scale application is hindered by its scarcity and high cost. NiMo alloy catalysts can be potential Pt-free alternatives to drive the sluggish kinetics of the HER under alkaline media, but their HER activity is still not ideal due to the limitation of Volmer step. Herein, we investigated the impact of trace levels of PtRu catalysts on NiMo electrodes towards the HER by incorporating advantages of both PtRu and NiMo catalysts to minimize cost and maintain a promising HER activity. Trace levels of PtRu catalysts from 0.0173 to 0.2648 mg cm −2 were loaded on commercial NiMo foam electrodes by a facile electrodeposition technique utilizing ppm concentration levels of PtRu in electrolyte. The results show that 0.0173 mg cm −2 PtRu loading on NiMo electrode can significantly enhance HER activity compared to the pristine NiMo foam electrode (Tafel slopes drop from ∼170 to ∼60 mV dec −1 ) due to the remarkable decline of energy barriers towards water dissociation and hydrogen adsorption. Meanwhile, the rate determining step (RDS) switches from the Volmer step to the Heyrovsky step when the PtRu loading increases to 0.0675 mg cm −2 . Promising catalytic stability is observed at 100 mA cm −2 over the course of 50 h with a PtRu loading of 0.1198 mg cm −2 . In conclusion, this work demonstrates a potential strategy to decrease the cost and simultaneously maintain superior HER performance by integrating trace levels of PtRu catalyst with NiMo foam electrodes.

Electrochemical water splitting↗
DOE OSTI2019

The total microbiome functions in bacteria and fungi

Unveiling the relationship between phylogeny and function of the microbiome is crucial to determine its contribution to ecosystem functioning. However, while there is a considerable amount of information on microbial phylogenetic diversity, our understanding of its relationship to functional diversity is still scarce. Here we predicted the total microbiome functions of bacteria and fungi on Earth using the total known functions from level 3 of KEGG Orthology by modelling the increase of functions with increasing diversity of bacteria or fungi. For bacteria and fungi, the unsaturated model described the data significantly better (for both P?<2.2e-16), suggesting the presence of two types of functions. Widespread functions ubiquitous in every living organism that make up two thirds of our current knowledge of microbiome functions are separated from rare functions from specialised enzymes present in only a few species. Given previous estimates on species richness, we predicted a global total of 35.5 million functions in bacteria and 3.2 million in fungi; of which only 0.02% and 0.14% are known today. Our approach highlights the necessity of novel and more sophisticated methods to unveil the entirety of rare functions to fully understand the involvement of the microbiome in ecosystem functioning. SIGNIFICANCE: The functionality of and within a microbial community is generally inferred based on the taxonomic annotation of the organism. However, our understanding of functional diversity and how it relates to taxonomy is still limited. Here we predict the total microbiome functionality in bacteria and fungi on Earth using known and annotated protein-coding sequences in species accumulation curves. Our estimates reveal that the majority of functionality (>99%) could be assigned to yet unknown and rare functions, highlighting that our current knowledge is incomplete and functional inference is thus lackluster.

Bacteria↗
DOE OSTI2023

Efficacy of antivirals and mRNA vaccination against an XBF clinical isolate

Recombination events occur frequently in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), resulting in genetic diversity. Because these events contribute to altered host immune evasion and antiviral susceptibility, it is crucial to evaluate the efficacy of COVID-19 vaccines and antivirals against recombinant variants. As of March 2023, XBB.1.5, a recombinant sublineage of XBB, is currently the dominant form globally (Fig. S1A, Supplementary Appendix). XBB emerged as a result of recombination between two BA.2 descendants, BJ.1 and BM.1.1.1 (a progeny of BA.2.75). We and other groups have shown that XBB.1.5 is resistant to several therapeutic monoclonal antibodies and effectively evades humoral immunity elicited by natural infection or COVID-19 vaccination.1, 2, 3 By March 30, 2023, an additional recombinant variant, XBF, had been sampled 8966 times in 47 countries and territories in GISAID, reaching it highest prevalence in Australia and New Zealand (Fig. S2, Supplementary Appendix). XBF is still increasing in frequency, although the prevalence of XBB.1.5 appears to be increasing at a faster pace in most regions (Fig. S1B, Supplementary Appendix). XBF is a recombinant of BA.5.2.3 (a descendant of BA.5) and CJ.1 (a descendant of BA.2.75) and, like CJ.1, has an additional three substitutions (R346T, F486P, and F490S) in the receptor-binding domain (RBD) of the consensus form of its spike protein compared to baseline BA.2.75 (Fig. S3A, Supplementary Appendix). CJ.1 and its related sublineage CJ.1.1 did not expand as extensively as XBF, being sampled in GISAID only 1589 and 142 times respectively. CJ.1 was found circulating in many countries, but most commonly sampled in South Korea, where it is still increasing and has currently reached about 5% of the sampled population. CJ.1.1 was most frequently sampled in Malaysia and Singapore, but remained rare in both nations, peaking at about 1% of the sample in December of 2022. Despite the importance of these related variants, we have no information about the antiviral efficacy and immunity induced by COVID-19 vaccines against a clinical isolate of XBF.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review

Understanding geomechanical properties of shales, such as stiffness properties and fracture toughness, is important in different areas of petroleum industry-related activities. Nanoscale to microscale experiments on shale samples require a much smaller sample compared to macroscale experiments. This is a major advantage because irregularly-shaped drill cuttings from shales can be used for experimental analyses, such as nanoindentation or atomic force microscopy (AFM). However, characterization of mechanical properties at the nano- to micro-scale is a relatively new addition to classical geomechanical experiments on shales, and there is still a lack of both fundamental knowledge and standard procedures for conducting experiments at this scale. The theoretical principles of nanoindentation-based (Gridded Nanoindentation and Modulus Mapping) and AFM-based experimental methods (PeakForce QNMTM and AFM-IR), a review of the literature results and the major findings are explained in Sections 2 and 3, respectively. These experimental techniques are compared in Section 4. Overall, nanoindentation experiments reveal the anisotropy of organic matter (OM)-rich shales at the nanoscale, and it is shown that gridded nanoindentation is capable of characterizing different minerals with respect to their stiffness properties. The capability of AFM (PeakForce QNMTM) to differentiate between different minerals within OM-rich shales with distinct mechanical properties, in particular stiffness, is also demonstrated. It is shown that AFM-based methods are more straightforward than gridded-nanoindentation to characterize OM-rich shales based on the stiffness of different constituent minerals of OM-rich shales, but nanoindentation can apply higher loads than AFM-based methods. Therefore, they can measure creep properties and fracture toughness of OM-rich shales. Here, it is shown that the OM is the most compliant part of the OM-rich shales, but it is still unclear if thermal maturation has an impact on the stiffness of OM. It is necessary to investigate if there is a relationship between the OM type (kerogen, bitumen, etc.) and mechanical properties such as Young’s modulus and Creep rate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A novel approach for adaptive skeleton toolpath generation

Industry 4.0 is revolutionizing manufacturing through the integration of automation and real-time data sharing in cyber-physical systems. At the forefront of this revolution is large-format additive manufacturing. In large-format printing, parts are often designed to be an even number of beads wide to produce a completely dense part. However, voids can still arise. This is often due to the part not being an even number of bead widths wide in some areas, or in geometry containing acute angles, as the process of generating closed contours cannot completely fill the space. Voids can be tolerated in smaller models, but in large-format additive manufacturing they may cause mechanical defects. To fill these voids, open loop paths called skeletons are often used, but they are typically limited by the physical constraints defined in the slicing software. To address this, researchers at Oak Ridge National Laboratory have extended skeleton toolpaths via an adaptive methodology. These adaptive skeletons were found to better fill void spaces through manipulation of physical parameters of the build process and were calculated as part of the slicing process.

42 ENGINEERING↗
DOE OSTI2020

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

Lithium-sulfur (Li-S) battery is one of the most promising candidates for the next generation energy storage systems. However, several barriers, including polysulfide shuttle effect, the slow solid-solid surface reaction pathway in the lower discharge plateau, and corrosion of Li anode still limit its practical applications, especially under the lean electrolyte condition required for high energy density applications. Here, we propose a solution-mediated sulfur reduction pathway to improve the capacity and reversibility of the sulfur cathode and suppress dendrite growth on the Li metal anode simultaneously. With this method, a high coulombic efficiency (99%) and stable cycle life over 100 cycles were achieved under application-relevant conditions (S loading: 6.2 mg cm-2; electrolyte to sulfur ratio: 3 mLE gs-1; sulfur weigh ratio: 72 wt%). This result is enabled by a specially designed Li2S4-rich electrolyte, in which Li2S is formed through a chemical disproportionation reaction instead of electrochemical routes. A diglyme solvent was used to obtain electrolytes with the optimum range of Li2S4 concentration. Operando X-ray absorption spectroscopy confirms the solution pathway in a practical Li-S cell. This solution pathway not only introduces a new electrolyte regime for practical Li-S batteries, but also provides a new perspective for bypassing the inefficient surface pathway for other electrochemical processes.

Wang, Hui↗
DOE OSTI2021

Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries

The cracking phenomenon of Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) secondary particles is frequently discovered and believed to be one of critical reasons deteriorating the long-term cycling stability of NMC cathode in lithium ion batteries (LIBs). However, the initiation and evolution of those cracks is still controversial due to the limited quantification especially by in situ monitoring, leading to the challenge of identifying an efficient approach to inhibit the formation of the fractures during repeated cycling. Herein, the irreversible, anisotropic cycling lattice and mesoscale expansion/shrinkage of nano-grain during the first cycle, as revealed by in situ X-ray diffraction (XRD) and in situ atomic force microscopy (AFM), have been quantified and confirmed to be the dominant driving forces of microcracks initiation at the grain boundaries. These microcracks preferentially nucleates at the core region with random oriented nano-grains in early stage. The further growth and aggregation of microcracks into macrocrack eventually results in microfracture propagation radially outward to the periphery region with more uniform nano-grain orientation. This mesoscale nano-grain architecture controlled cracking process highlight the importance of predictive synthesis of cathode materials with controllable multiscale crystalline architecture for high-performance LIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Current Status and Future Directions of All-Solid-State Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Ternary Oxide Cathodes

All-solid-state batteries (ASSBs) offer great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and improved safety for electric vehicles. ASSBs employing lithium metal anodes (Li), sulfide-based solid-state electrolytes (SSE), and Ni-rich layered transition metal oxide cathodes (LiMO 2 , M = Ni, Mn, Co, Al) are particularly promising due to its superior electrochemical performance compared to other solid-electrolyte systems. However, the battery cycle life at high cathode mass loading and high current is still limited because the failure mechanism is not fully understood. Lithium dendrite growth at the anode or inside a solid electrolyte still represents as a serious risk of cell failure. Interfacial resistance increases attributed to electrolyte decomposition and interfacial void formation at both cathode–electrolyte and anode–electrolyte interfaces lead to gradual capacity fading. In this Review, we present the fundamental challenges and recent scientific understandings of each component in ASSBs. The novel diagnostic tools for these components, especially the interfaces buried under the surface that are often hard for characterization are mainly examined. Lastly, we offer a perspective for future research directions. We hope this Review will provide a timely snapshot of state-of-the-art research progress in ASSBs to accelerate the development of ASSBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Nuclear Data Sheets for A=245

Available information pertaining to the nuclear structure of ground and excited states for all known nuclei with mass numbers A=245 have been compiled and evaluated. In this work, the adopted level and decay schemes, as well as the detailed nuclear properties and configuration assignments based on experimental data, are presented for these nuclides. When there are insufficient data, expected values from systematics of nuclear properties and/or theoretical calculations are utilized. Unexpected or discrepant experimental results are also noted. Since the last evaluation, new rotational bands in 245 Pu have been observed to high spin from transfer reaction 244 Pu( 209 Bi, 208 Biγ) by 2014Ho16. While in 245 Am, the 249 Bk α decay measurements by 2013Ah03 added a new rotational band based on π3/2[521] configuration. The 245 Pu β - decay scheme is basically what was proposed in the late 60's and 47 γ rays have still not been placed. In 245 Cm, precise alpha energies and intensities were measured by 2015Ah03 in 249Cf α decay. Their reported alpha energies of the main α group were about 2 keV lower than in the previous evaluation. The spin and parity of the g.s. of 245 Es is still ambiguous as more detailed information on the decay is needed. With the production of 249 No via fusion evaporation reaction by groups in Dubna and GSI, it's alpha decay was studied and some properties of the daughter 245 Fm were published and included in this evalaution. Information on the other nuclides is scarce and not much has been investigated since the last evaluation. A summary and compilation of the discovery of the various nuclides in this mass region is given in: 2013Fr02 ( 245 Pu, 245 Am, 245 Cm, 245 Bk, 245 Cf), 2011Me01 ( 245 Es), and 2013Th02 ( 245 Md, 245 Fm).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Indirect methods in nuclear astrophysics with relativistic radioactive beams

Reactions with radioactive nuclear beams at relativistic energies have opened new doors to clarify the mechanisms of stellar evolution and cataclysmic events involving stars and during the big bang epoch. Numerous nuclear reactions of astrophysical interest cannot be assessed directly in laboratory experiments. Ironically, some of the information needed to describe such reactions, at extremely low energies (e.g., keVs), can only be studied on Earth by using relativistic collisions between heavy ions at GeV energies. In this contribution, we make a short review of experiments with relativistic radioactive beams and of the theoretical methods needed to understand the physics of stars, adding to the knowledge inferred from astronomical observations. We continue by introducing a more detailed description of how the use of relativistic radioactive beams can help to solve astrophysical puzzles and several successful experimental methods. State-of-the-art theories are discussed at some length with the purpose of helping us understand the experimental results reported. The review is not complete and we have focused most of it to traditional methods aiming at the determination of the equation of state of symmetric and asymmetric nuclear matter and the role of the symmetry energy. Whenever possible, under the limitations of our present understanding of experimental data and theory, we try to pinpoint the information still missing to further understand how stars evolve, explode, and how their internal structure might be. We try to convey the idea that in order to improve microscopic theories for many-body calculations, nuclear structure, nuclear reactions, and astrophysics, and in order to constrain and allow for convergence of our understanding of stars, we still need considerable improvements in terms of accuracy of experiments and the development of new and dedicated nuclear facilities to study relativistic reactions with radioactive beams.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Extracting energy from ocean thermal and salinity gradients to power unmanned underwater vehicles: State of the art, current limitations, and future outlook

Thermal gradient energy-generation technologies for powering unmanned underwater vehicles (UUVs) or autonomous sensing systems in the ocean are mainly in the research development phase or commercially available at a limited scale, and salinity-gradient energy-generation technologies have not been adequately researched yet. The demand for self-powered UUVs suitable for long-term deployments has been growing, and further research related to small-scale ocean gradient energy systems is needed. In this study, we conducted a comprehensive review about harvesting energy from ocean thermal or salinity gradients for powering UUVs, focusing on gliders and profiling floats. Thermal gradient energy systems for UUVs based on phase change materials (PCM) cannot provide the energy required for powering autonomous sensing systems because of the systems' low energy conversion efficiency. Besides reducing energy consumption by developing more efficient electrical-mechanical systems, enhancing the thermal conductivity of the PCMs may help address this challenge by increasing the power generation rate of the UUVs. Several other emerging technologies, such as thermoelectric generators, shape memory alloys, and small-scale thermodynamic cycle systems, have shown potential for powering UUVs, but they are still only at the laboratory testing or conceptual design phase. The most advanced power generation technologies based on salinity gradients, reverse electrodialysis and pressure-retarded osmosis, are still not economically viable for large-scale deployment, mainly because of the high cost of the components required to operate in harsh saline environments. Our feasibility evaluation showed that existing salinity gradient power generation technologies are not directly feasible for powering UUVs in the open ocean.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Role of emission controls in reducing the 2050 climate change penalty for PM2.5 in China

Previous studies demonstrated that global warming can lead to deteriorated air quality even when anthropogenic emissions were kept constant, which has been called a climate change penalty on air quality. It is expected that anthropogenic emissions will decrease significantly in the future considering the aggressive emission control actions in China. However, the dependence of climate change penalty on the choice of emission scenario is still uncertain. To fill this gap, we conducted multiple independent model simulations to investigate the response of PM2.5 to future (2050) climate warming (RCP8.5) in China but with different emission scenarios, including the constant 2015 emissions, the 2050 CLE emissions (based on Current Legislation), and the 2050 MTFR emissions (based on Maximum Technically Feasible Reduction). For each set of emissions, we estimate climate change penalty as the difference in PM2.5 between a pair of simulations with either 2015 or 2050 meteorology. Under 2015 emissions, we find a PM2.5 climate change penalty of 1.43 µg m-3 in Eastern China, leading to an additional 35,000 PM2.5-related premature deaths [95% confidence interval (CI), 21,000-40,000] by 2050. However, the PM2.5 climate change penalty weakens to 0.24 µg m-3 with strict anthropogenic emission controls under the 2050 MTFR emissions, which decreases the associated PM2.5-related deaths to 17,000. The smaller MTFR climate change penalty contributes 14% of the total PM2.5 decrease when both emissions and meteorology are changed from 2015 to 2050, and 24% of total health benefits associated with this PM2.5 decrease in Eastern China. This finding suggests that controlling anthropogenic emissions can effectively reduce the climate change penalty on PM2.5 and its associated premature deaths, even though a climate change penalty still occurs even under MTFR. Strengthened controls on anthropogenic emissions is key to attaining air quality targets and protecting human health in the context of future global climate change.

Liu, Song↗
DOE OSTI2025

Beneath the surface: Unsolved questions in soil virus ecology

Soil virus ecology is an exciting but still nascent field of research in soil microbiology. While there has been a recent surge in soil virus research studies, many fundamental questions remain unanswered, and a range of technical and bioinformatic challenges need to be overcome. In this perspective article, we present a series of key questions that highlight fruitful research areas for ongoing and future efforts. These include describing the challenges involved in understanding soil viral abundance and activity, spatiotemporal dynamics, life strategy prevalence, virus-mediated biogeochemical impacts, viral protein function, host prediction, and soil RNA virus discovery. In the near term, combining approaches (e.g., cultivation-based, meta-omics, biogeochemical, experimental, and bioinformatic) will be key to assessing the ecological and biogeochemical impacts of soil viruses from the microscopic to the field and global scales. Still, we stress that results must be tempered by current methodological limitations and highlight knowledge gaps that are most pressing to fill via new methods or measurements, such as the prevalence of different viral replication strategies across soils, the fate of microbial necromass carbon after viral lysis, the frequency of virus-host encounters that do not lead to successful infections yet could be bioinformatically mistaken as infections, and the diversity and ecological impacts of RNA viruses in soil.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

First-principles study of the structures and redox mechanisms of Ni-rich lithium nickel manganese cobalt oxides

To reduce the cobalt (Co) content in lithium-ion batteries, Ni-rich (high-Ni) lithium nickel manganese cobalt oxides (NMC) are pursued as one of the next-generation cathode materials. However, there is still debate on the crystal and electronic structures of the baseline, LiNiO 2 . Density Functional Theory (DFT) calculations were performed to provide a theoretical understanding of Ni-rich NMC. First, it was found that the commonly used $R\bar{3}m$ structure for LiNiO 2 is metallic, contrary to the experimentally reported mix-conducting behavior. Among the four different space groups, $R\bar{3}m$, C2/m, P2 1 /c, and P2/c, P2/c with charge disproportionation of Ni 2+ and Ni 4+ is the most energetically stable and semiconducting structure of LiNiO 2 . Therefore, the atomic structures of representative Ni-rich NMC were built by partially replacing Ni with Co or Mn in the P2/c LiNiO 2 to form Li x Ni y Mn z Co 1-y-z O 2 . In the fully lithiated (x=1.0) high Ni content NMC (y>0.5), the oxidation state of all Mn ions becomes 4+, while Co ions still maintain 3+, and part of the Ni ions become 3+ to compensate for the charge. Upon delithiation, the local environment shows more variation of the charge states on the transition metal (TM) ions. The average oxidation on each TM follows a sequence of losing electrons that starts from Ni 2+ to Ni 3+ , then oxidizing Ni 3+ and Co 3+ , while Mn 4+ remains electrochemically inactive till x=0. Finally, a general relationship for the oxidation state change in each TM as a function of x is derived and shows agreement with both modeling and experimental data.

25 ENERGY STORAGE↗