Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Self-Assembly of Well-Aligned 3C-SiC Ripples by Focused Ion Beam

Well-aligned ripple structures on single crystal 3C-SiC surface were created and imaged in real time by focused ion beam (FIB) bombardment. Ex situ atomic force microscopy was applied to investigate topography. The ripple structure was formed by ion sputtering beyond a critical incidence angle (~50°), and its characteristic wavelength varied from 158 nm to 296 nm with the incidence angle and ion beam flux. Furthermore, the geometry, ordering and homogeneity of the self-assembled surface ripples can be well controlled by varying the ion beam incidence angle and beam current, as required for the formation of nanostructures used in SiC optical and electronic applications.

36 MATERIALS SCIENCE↗

Bioinspired aligned magnetic features in aerogels for humidity sensing

Many natural plant tissues, such as pinecones, utilize structures to transduce changes in humidity into movement or strain. These often employ layered structures with aligned features in order to create differential stress across the material as different portions swell at different rates. Here, by replicating these types of structures in synthetic materials we can create structures that respond to humidity in a similar manner. Taking these aligned features as inspiration, silica aerogels with tailored humidity reactive properties were created. This behavior was achieved by creating aligned features in these aerogels using a Helmholtz coil to produce a uniform magnetic field that aligned ferrofluid droplets into chains and needle like features. These magnetite-based structures were shown to retain their superparamagnetic properties, allowing them to easily be removed from the aerogels, leaving a large number of aligned channels. Aerogels with the removed needles experienced significantly different strains than both unmodified aerogels and aerogels with the aligned features still in place. Aerogels with these tunable aligned features could be used in humidity sensors that can transduce changes in humidity into strain and could be used in applications such as volatile organic compound capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of In2O3/TiO2 nanotube arrays hybrids with homogeneously developed nanostructure for photocatalytic degradation of Rhodamine B

Highlights: • A new class of plate-like In{sub 2}O{sub 3}/TNAs photocatalyst is successfully fabricated. • The obtained In{sub 2}O{sub 3}/TNAs hybrid presents a well-aligned nanotubular structure. • In{sub 2}O{sub 3} particles are dispersed homogeneously on TNAs without blocking the nozzles. • In{sub 2}O{sub 3}/TNAs hybrid shows a much enhanced Rhodamine B degradation efficiency. • In{sub 2}O{sub 3}/TNAs hybrid demonstrates an excellent recycling capability. - Abstract: To enhance the photocatalytic recycling capability of the TiO{sub 2}-based photocatalysts, a new kind of plate-like In{sub 2}O{sub 3}/TiO{sub 2} nanotube array (TNA) hybrids is fabricated herein by constructing TNAs via an anodization method followed by doping In{sub 2}O{sub 3} via a solvothermal method. The obtained In{sub 2}O{sub 3}/TNA hybrid demonstrates a well-aligned nanotubular structure with homogeneous dispersion of In{sub 2}O{sub 3} nanoparticles. It shows a much higher degradation rate of 77% after 2 h compared to TNA (37%). In addition, the plate-like feature endows the photocatalysts with an excellent recycling capability. These superior photocatalytic degradation performances can be ascribed to the following factors: (1) the enhanced light absorption ability and efficient separation of photoexcited electron-hole pairs derived from the formation of the heterostructure between the interface of TiO{sub 2} and In{sub 2}O{sub 3}; (2) the efficient transport of reactant molecules provided by the well-defined TNAs and the homogeneous distribution of the In{sub 2}O{sub 3} nanoparticles without blocking the nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of Accurate Structure for Mounting and Aligning Thin-Foil X-Ray Mirrors

The goal of this work was to improve the assembly accuracy for foil x-ray optics as produced by the high-energy astrophysics group at the NASA Goddard Space Flight Center. Two main design choices lead to an alignment concept that was shown to improve accuracy well within the requirements currently pursued by the Constellation-X Spectroscopy X-Ray Telescope (SXT).

Heilmann, Ralf K.↗

Controlling the oriented growth of Ti{sub 2}SnC grains with carbon fiber as a reactive template in the Ti-Sn-C system

Carbon short fibers with a length of {approx}3 mm used as a reactive template were mixed with Ti and Sn powders. The mixture was pressurelessly sintered at 1200 deg. C for 2 h in a vacuum atmosphere. The microstructure shows that Ti{sub 2}SnC grains with a plate-like shape grow along a preferred direction, forming a 'string' structure in which Ti{sub 2}SnC platelets pack themselves closely with a top-bottom-top-bottom sequence. With increasing the length of the C fibers, the length of the 'string' structures increases. A large amount of long and aligned 'string' structures have formed after sintering the samples prepared by infiltration of the carbon short fibers with a length of {approx}50 mm in a Ti-Sn slurry and then stacking and cold pressing. X-ray diffraction and scanning electron microscopy, respectively were used to analyze and observe the phase composition and microstructure.

36 MATERIALS SCIENCE↗

The Milky Way’s stellar streams and globular clusters do not align in a Vast Polar Structure

ABSTRACT There is increasing evidence that a substantial fraction of Milky Way satellite galaxies align in a rotationally supported plane of satellites, a rare configuration in cosmological simulations of galaxy formation. It has been suggested that other Milky Way substructures (namely young halo globular clusters and stellar/gaseous streams) similarly tend to align with this plane, accordingly dubbed the Vast Polar Structure (VPOS). Using systemic proper motions inferred from Gaia data, we find that globular cluster orbital poles are not clustered in the VPOS direction, though the population with the highest VPOS membership fraction is the young halo clusters (∼30 per cent). We additionally provide a current census of stellar streams, including new streams discovered using the Dark Energy Survey and Gaia data sets, and find that stellar stream normals are also not clustered in the direction of the VPOS normal. We also find that, based on orbit modelling, there is a likely association between NGC 3201 and the Gjöll stellar stream and that, based on its orbital pole, NGC 4147 is likely not a Sagittarius globular cluster. That the Milky Way’s accreted globular clusters and streams do not align in the same planar configuration as its satellites suggests that the plane of satellites is either a particularly stable orbital configuration or a population of recently accreted satellites. Neither of these explanations is particularly likely in light of other recent studies, leaving the plane of satellites problem as one of the more consequential open problems in galaxy formation and cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronic structure evolution and energy level alignment at C{sub 60}/4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl) benzenamine]/MoO{sub x}/indium tin oxide interfaces

The electronic structure evolution and energy level alignment have been investigated at interfaces comprising fullerene (C{sub 60})/4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl) benzenamine] (TAPC)/ molybdenum oxide (MoO{sub x})/ indium tin oxide with ultraviolet photoemission spectroscopy and inverse photoemission spectroscopy. With deposition of TAPC upon MoO{sub x}, a dipole of 1.58 eV was formed at the TAPC/MoO{sub x} interface due to electron transfer from TAPC to MoO{sub x}. The highest occupied molecular orbital (HOMO) onset of TAPC was pinned closed to the Fermi level, leading to a p-doped region and thus increasing the carrier concentration at the very interface. The downward band bending and the resulting built-in field in TAPC were favorable for the hole transfer toward the TAPC/MoO{sub x} interface. The rigid downward shift of energy levels of TAPC indicated no significant interface chemistry at the interface. With subsequent deposition of C{sub 60} on TAPC, a dipole of 0.27 eV was observed at the C{sub 60}/TAPC heterojunction due to the electron transfer from TAPC to C{sub 60}. This led to a drop of the HOMO of TAPC near the C{sub 60}/TAPC interface, and hence further enhanced the band bending in TAPC. The band bending behavior was also observed in C{sub 60}, similarly creating a built-in field in C{sub 60} film and improving the electron transfer away from the C{sub 60}/TAPC interface. It can be deduced from the interface analysis that a promising maximum open circuit voltage of 1.5 eV is achievable in C{sub 60}/TAPC-based organic photovoltaic cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Offset-aligned three-dimensional integrated circuit

A three-dimensional integrated circuit includes a first die structure having a first geometry. The first die structure includes a first region that operates with a first power density and a second region that operates with a second power density. The first power density is less than the second power density. The three-dimensional integrated circuit includes a second die structure having a second geometry. A stacked portion of the second die structure is aligned with the first region. The three-dimensional integrated circuit includes an additional die structure stacked with the first die structure and the second die structure. The additional die structure has the first geometry or the second geometry.

Wilkerson, Brett P.↗

A study of field-aligned currents observed at high and low altitudes in the nightside magnetosphere

Field-aligned current structures on auroral field lines observed at low and high altitudes using DE 1 and ISEE 2 magnetometer, and particle data observed when the spacecraft are in magnetic conjunction in the near-midnight magnetosphere, are investigated. To minimize latitudinal ambiguity, the plasma-sheet boundary layer observed with ISEE 2 and the discrete aurora at the poleward edge of the auroral oval with DE 1 are studied. The overall current observed at highest latitudes is flowing into the ionosphere, and is likely to be carried by ionospheric electrons flowing upward. There are, however, smaller-scale current structures within this region. The sense and magnitude of the field-aligned currents agree at the two sites. The ISEE 2 data suggests that the high-latitude downward current corresponds to the high-latitude boundary of the plasma-sheet boundary layer, and may be associated with the ion beams observed there.

Elphic, R. C.↗

Structure of supersonic turbulent flow past a swept compression corner

The structure of the shock wave/turbulent boundary-layer interaction generated by a 3D swept compression corner has been investigated through a combined experimental and theoretical research program. The flowfield geometry is defined by the streamwise compression angle alpha and the sweep angle lambda of the corner. The present study examines two different configurations, namely (alpha, lambda) = (24 deg, 40 deg) and (24 deg, 60 deg) at Mach 3 and Re sigma infinity about 9 x 10 exp 5. The theoretical model is the 3D Reynolds-averaged compressible Navier-Stokes equations with turbulence incorporated using a turbulent eddy viscosity. The calculated flowfields display general agreement with experimental data for surface pressure and good agreement with experimental flowfield profiles of pitot pressure and yaw angle. The principal feature of the flowfield is a large vortical structure approximately aligned with the corner. The entrainment of incoming fluid into the vortical structure is strongly affected by the sweep angle lambda. Viscous (turbulent and molecular) effects appear to be important only in the immediate vicinity of the surface and in an isolated region within the interaction and near the corner.

Knight, Doyle D.↗

The 1.6-Å crystal structure of the class of chaperones represented by Escherichia coli Hsp31 reveals a putative catalytic triad

Heat shock proteins (Hsps) play essential protective roles under stress conditions by preventing the formation of protein aggregates and degrading misfolded proteins. EcHsp31, the yedU (hchA) gene product, is a representative member of a family of chaperones that alleviates protein misfolding by interacting with early unfolding intermediates. The 1.6-{angstrom} crystal structure of the EcHsp31 dimer reveals a system of hydrophobic patches, canyons, and grooves, which may stabilize partially unfolded substrate. The presence of a well conserved, yet buried, triad in each two-domain subunit suggests a still unproven hydrolytic function of the protein. A flexible extended linker between the A and P domains may play a role in conformational flexibility and substrate binding. The {alpha}-{beta} sandwich of the EcHsp31 monomer shows structural similarity to PhPI, a protease belonging to the DJ-1 superfamily. The structure-guided sequence alignment indicates that Hsp31 homologs can be divided in three classes based on variations in the P domain that dramatically affect both oligomerization and catalytic triad formation.

36 MATERIALS SCIENCE↗

Precision Synthesis of Conjugated Polymer Films by Surface-Confined Stepwise Sonogashira Cross-Coupling

Thin films of poly(arylene ethynylene)-conjugated polymers, including low-energy-gap donor–acceptor polymers, can be prepared via stepwise polymerization utilizing surface-confined Sonogashira cross-coupling. This robust and efficient polymerization protocol yields conjugated polymers with a precise molecular structure and with nanometer-level control of the organization and the uniform alignment of the macromolecular chains in the densely packed film. In addition to high stability and predictable and well-defined molecular organization and morphology, the surface-confined conjugated polymer chains experience significant interchain electronic interactions, resulting in dominating intermolecular π-electron delocalization which is primarily responsible for the electronic and spectroscopic properties of polymer films. The fluorescent films demonstrate remarkable performance in chemosensing applications, showing a turn-off fluorescent response on the sub-ppt (part per trillion) level of nitroaromatic explosives in water. This unique sensitivity is likely related to the enhanced exciton mobility in the uniformly aligned and structurally monodisperse polymer films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

STS-112 Flight Day 4 Highlights

On the fourth day of STS-112, its crew (Jeffrey Ashby, Commander; Pamela Melroy, Pilot; David Wolf, Mission Specialist; Piers Sellers, Mission Specialist; Sandra Magnus, Mission Specialist; Fyodor Yurchikhin, Mission Specialist) onboard Atlantis and the Expedition 5 crew (Valery Korzun, Commander; Peggy Whitson, Flight Engineer; Sergei Treschev, Flight Engineer) onboard the International Space Station (ISS) are seen preparing for the installation of the S1 truss structure. Inside the Destiny Laboratory Module, Korzun and other crewmembers are seen as they busily prepare for the work of the day. Sellers dons an oxygen mask and uses an exercise machine in order to purge the nitrogen from his bloodstream, in preparation for an extravehicular activity (EVA). Whitson uses the ISS's Canadarm 2 robotic arm to grapple the S1 truss and remove it from Atlantis' payload bay, with the assistance of Magnus. Using the robotic arm, Whitson slowly maneuvers the 15 ton truss structure into alignment with its attachment point on the starboard side of the S0 truss structure, where the carefully orchestrated mating procedures take place. There is video footage of the entire truss being rotated and positioned by the arm, and ammonia tank assembly on the structure is visible, with Earth in the background. Following the completion of the second stage capture, the robotic arm is ungrappled from truss. Sellers and Wolf are shown exiting the the Quest airlock hatch to begin their EVA. They are shown performing a variety of tasks on the now attached S1 truss structure, including work on the Crew Equipment Translation Cart (CETA), the S-band Antenna Assembly, and umbilical cables that provide power and remote operation capability to cameras. During their EVA, they are shown using a foot platform on the robotic arm. Significant portions of their activities are shown from the vantage of helmet mounted video cameras. The video closes with a final shot of the ISS and its new S1 truss.

Source record↗

Submillimeter Wave Astronomy Satellite Conceptual Design Review

The SWAS instrument consists of the moving telescope assembly, the interface baseplate assembly, and the thermal control housing. The movin g telescope structure holds the primary mirror, secondary mirror, and receiver front end in precise alignment. This structure also carries the receiver cold plate radiators, which view cold space both directl y and through reflection off the primary mirror. The moving telescope assembly attaches to the interface baseplate with an open pivot frame through which flex leads from the receiver front end also pass. Two flexure-mounted linear actuators tilt the moving telescope assembly u p to +/-3 deg in two axes. The interface plate serves as a mounting for these actuators as well as the acousto-optic spectrometer, the inst rument control electronics, the star tracker, and the balance of the receiver components. The thermal control housing attaches to the inte rface baseplate around its edge. The top cylindrical part of this hou sing serves to shade the receiver cold plate radiators from Sun and Earth influence. The bottom "D" shaped portion of the housing is therma lly isolated from the top and forms the electronlcs radiator. Heat is conducted from the Interface baseplate into this lower portion of the shell. The radiator geometry and conduction paths create a very stab le thermal environment in the center of the interface baseplate where the AOS and receiver IF amplifiers are heat sinked. The outer surface of the thermal control housing is covered with fused silica second s urface mirrors that reflect visible light and radiate infrared energy . The instrument is mounted to the spacecraft through four thermally- isolating titanium flexures an the underside of the interface basepla te.

Source record↗

Crystal Structure of Butyrate Kinase 2 from Thermotoga maritima, a Member of the ASKHA Superfamily of Phosphotransferases

The enzymatic transfer of phosphoryl groups is central to the control of many cellular processes. One of the phosphoryl transfer mechanisms, that of acetate kinase, is not completely understood. Besides better understanding of the mechanism of acetate kinase, knowledge of the structure of butyrate kinase 2 (Buk2) will aid in the interpretation of active-site structure and provide information on the structural basis of substrate specificity. The gene buk2 from Thermotoga maritima encodes a member of the ASKHA (acetate and sugar kinases/heat shock cognate/actin) superfamily of phosphotransferases. The encoded protein Buk2 catalyzes the phosphorylation of butyrate and isobutyrate. We have determined the 2.5-{angstrom} crystal structure of Buk2 complexed with ({beta},{gamma}-methylene) adenosine 5'-triphosphate. Buk2 folds like an open-shelled clam, with each of the two domains representing one of the two shells. In the open active-site cleft between the N- and C-terminal domains, the active-site residues consist of two histidines, two arginines, and a cluster of hydrophobic residues. The ATP binding region of Buk2 in the C-terminal domain consists of abundant glycines for nucleotide binding, and the ATP binding motif is similar to those of other members of the ASKHA superfamily. The enzyme exists as an octamer, in which four disulfide bonds form between intermolecular cysteines. Sequence alignment and structure superposition identify the simplicity of the monomeric Buk2 structure, a probable substrate binding site, the key residues in catalyzing phosphoryl transfer, and the substrate specificity differences among Buk2, acetate, and propionate kinases. The possible enzyme mechanisms are discussed.

36 MATERIALS SCIENCE↗

Structure and mechanism of human DNA polymerase [eta]

The variant form of the human syndrome xeroderma pigmentosum (XPV) is caused by a deficiency in DNA polymerase {eta} (Pol{eta}), a DNA polymerase that enables replication through ultraviolet-induced pyrimidine dimers. Here we report high-resolution crystal structures of human Pol{eta} at four consecutive steps during DNA synthesis through cis-syn cyclobutane thymine dimers. Pol{eta} acts like a 'molecular splint' to stabilize damaged DNA in a normal B-form conformation. An enlarged active site accommodates the thymine dimer with excellent stereochemistry for two-metal ion catalysis. Two residues conserved among Pol{eta} orthologues form specific hydrogen bonds with the lesion and the incoming nucleotide to assist translesion synthesis. On the basis of the structures, eight Pol{eta} missense mutations causing XPV can be rationalized as undermining the molecular splint or perturbing the active-site alignment. The structures also provide an insight into the role of Pol{eta} in replicating through D loop and DNA fragile sites.

08 HYDROGEN↗