Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIELECTRICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Accurate Measurements of the Dielectric Constant of Seawater at L Band

This report describes measurements of the dielectric constant of seawater at a frequency of 1.413 GHz that is at the center of the L-Sand radiometric protected frequency spectrum. Aquarius will be sensing the sea surface salinity from space in this band. The objective of the project is to refine the model function for the dielectric constant as a function of salinity and temperature so that remote sensing measurements can be made with the accuracy needed to meet the measurement goals (0.2 psu) of the Aquarius mission. The measurements were made, using a microwave cavity operated in the transmission configuration. The cavity's temperature was accurately regulated to 0.02 C by immersing it in a temperature controlled bath of distilled water and ethanol glycol. Seawater had been purchased from Ocean Scientific International Limited (OS1L) at salinities of 30, 35 and 38 psu. Measurements of these seawater samples were then made over a range of temperatures, from l0 C to 35 C in 5 C intervals. Repeated measurements were made at each temperature and salinity, Mean values and standard deviations were then computed. Total error budgets indicated that the real and imaginary parts of the dielectric constant had a relative accuracy of about l%.

Lang, Roger H.↗
NASA NTRS2011

Dielectric Covered Planar Antennas at Submillimeter Wavelengths for Terahertz Imaging

Most optical systems require antennas with directive patterns. This means that the physical area of the antenna will be large in terms of the wavelength. When non-cooled systems are used, the losses of microstrip or coplanar waveguide lines impede the use of standard patch or slot antennas for a large number of elements in a phased array format. Traditionally, this problem has been solved by using silicon lenses. However, if an array of such highly directive antennas is to be used for imaging applications, the fabrication of many closely spaced lenses becomes a problem. Moreover, planar antennas are usually fed by microstrip or coplanar waveguides while the mixer or the detector elements (usually Schottky diodes) are coupled in a waveguide environment. The coupling between the antenna and the detector/ mixer can be a fabrication challenge in an imaging array at submillimeter wavelengths. Antennas excited by a waveguide (TE10) mode makes use of dielectric superlayers to increase the directivity. These antennas create a kind of Fabry- Perot cavity between the ground plane and the first layer of dielectric. In reality, the antenna operates as a leaky wave mode where a leaky wave pole propagates along the cavity while it radiates. Thanks to this pole, the directivity of a small antenna is considerably enhanced. The antenna consists of a waveguide feed, which can be coupled to a mixer or detector such as a Schottky diode via a standard probe design. The waveguide is loaded with a double-slot iris to perform an impedance match and to suppress undesired modes that can propagate on the cavity. On top of the slot there is an air cavity and on top, a small portion of a hemispherical lens. The fractional bandwidth of such antennas is around 10 percent, which is good enough for heterodyne imaging applications.The new geometry makes use of a silicon lens instead of dielectric quarter wavelength substrates. This design presents several advantages when used in the submillimeter-wave and terahertz bands: a) Antenna fabrication compatible with lithographic techniques. b) Much simpler fabrication of the lens. c) A simple quarter-wavelength matching layer of the lens will be more efficient if a smaller portion of the lens is used. d) The directivity is given by the lens diameter instead of the leaky pole (the bandwidth will not depend anymore on the directivity but just on the initial cavity). The feed is a standard waveguide, which is compatible with proven Schottky diode mixer/detector technologies. The development of such technology will benefit applications where submillimeter- wave heterodyne array designs are required. The main fields are national security, planetary exploration, and biomedicine. For national security, wideband submillimeter radars could be an effective tool for the standoff detection of hidden weapons or bombs concealed by clothing or packaging. In the field of planetary exploration, wideband submillimeter radars can be used as a spectrometer to detect trace concentrations of chemicals in atmospheres that are too cold to rely on thermal imaging techniques. In biomedicine, an imaging heterodyne system could be helpful in detecting skin diseases.

Chattopadhyay, Goutam↗
NASA NTRS2012

Dielectric Barrier Discharge Plasma Actuator for Flow Control

This report is Part II of the final report of NASA Cooperative Agreement contract no. NNX07AC02A. It includes a Ph.D. dissertation. The period of performance was January 1, 2007 to December 31, 2010. Part I of the final report is the overview published as NASA/CR-2012- 217654. Asymmetric dielectric barrier discharge (DBD) plasma actuators driven by nanosecond pulses superimposed on dc bias voltage are studied experimentally. This produces non-self-sustained discharge: the plasma is generated by repetitive short pulses, and the pushing of the gas occurs primarily due to the bias voltage. The parameters of ionizing pulses and the driving bias voltage can be varied independently, which adds flexibility to control and optimization of the actuators performance. The approach consisted of three elements coupled together: the Schlieren technique, burst mode of plasma actuator operation, and 2-D numerical fluid modeling. During the experiments, it was found that DBD performance is severely limited by surface charge accumulation on the dielectric. Several ways to mitigate the surface charge were found: using a reversing DC bias potential, three-electrode configuration, slightly conductive dielectrics, and semi conductive coatings. Force balance measurements proved the effectiveness of the suggested configurations and advantages of the new voltage profile (pulses+bias) over the traditional sinusoidal one at relatively low voltages. In view of practical applications certain questions have been also addressed, such as electrodynamic effects which accompany scaling of the actuators to real size models, and environmental effects of ozone production by the plasma actuators.

Opaits, Dmitry, F.↗
NASA NTRS2014

Development of New Dielectric NDE Techniques for Spaceflight Materials

Dielectric Spectroscopy is a relatively new technique for non-destructively measuring material properties. The goal for this project is to extend the use of state-of-the-art dielectric spectroscopy systems to measure the spectra of spaceflight materials and develop non-destructive evaluation (NDE) sensors based on dielectric material properties. This work may lead to a new class of material density, moisture, temperature, and defect sensors providing structural integrity and health measurements for future spacecraft and launch structures.

Project↗
NASA NTRS2014

Technique for Performing Dielectric Property Measurements at Microwave Frequencies

A method, system, apparatus, and computer readable medium has been provided with the ability to obtain a complex permittivity dielectric or a complex permeability micron of a sample in a cavity. One or more complex-valued resonance frequencies f(sub m) of the cavity, wherein each f(sub m) is a measurement, are obtained. Maxwell's equations are solved exactly for dielectric, and/or micron, using the f(sub m) as known quantities, thereby obtaining the dielectric and/or micron of the sample.

Barmatz, Martin B.↗
NASA NTRS2014

Tailorable Dielectric Material with Complex Permittivity Characteristics

A dielectric material includes a network of nanosubstrates, such as but not limited to nanotubes, nanosheets, or other nanomaterials or nanostructures, a polymer base material or matrix, and nanoparticles constructed at least partially of an elemental metal. The network has a predetermined nanosubstrate loading percentage by weight with respect to a total weight of the dielectric material, and a preferential or predetermined longitudinal alignment with respect to an orientation of an incident electrical field. A method of forming the dielectric material includes depositing the metal-based nanoparticles onto the nanosubstrates and subsequently mixing these with a polymer matrix. Once mixed, alignment can be achieved by melt extrusion or a similar mechanical shearing process. Alignment of the nanosubstrate may be in horizontal or vertical direction with respect to the orientation of an incident electrical field.

Dudley, Kenneth L.↗
NASA NTRS2016

Dielectric Waveguides Splitter and Hybrid/Isolator for Bidirectional Link

A system, method, device, and apparatus provide a dielectric waveguide splitter/bi-directional link. A dielectric substrate fabricated into a first Y-junction waveguide with a first port splitting into a first branch leading to a second port and a second branch leading to a third port. An angle between the first branch and the second branch is below ninety degrees (90.degree.). The dielectric waveguide splitter enables millimeter-wave (mmWave) transmission between the first port and the second port while reducing feedback of the mmWave between the second and third port. Two Y-junction waveguides may be fabricated back-to-back to provide simultaneous bidirectional mmWave transmission at a single frequency.

Tang, Adrian Joseph↗
NASA NTRS2017

High Performance Composite Dielectric Ink for Ultracapacitors

The present invention is a dielectric ink and means for printing using said ink. Approximately 10-20% of the ink is a custom organic vehicle made of a polar solvent and a binder. Approximately 30-70% of the ink is a dielectric powder having an average particle diameter of approximately 10-750 nm. Approximately 5-15% of the ink is a dielectric constant glass. Approximately 10-35% of the ink is an additional amount of solvent. The ink is deposited on a printing substrate to form at least one printed product, which is then dried and cured to remove the solvent and binder, respectively. The printed product then undergoes sintering in an inert gas atmosphere.

Rolin, Terry D.↗
NASA NTRS2018

The Possible Contribution of Dielectric Breakdown to Space Weathering on Phobos

The origins of Phobos and Deimos are uncertain; both are so space weathered that their surface compositions are difficult to determine using spectral reflectance measurements. We show how the winter temperatures and associated conditions in the polar regions of Phobos could make the regolith susceptible to space weathering from dielectric breakdown caused by solar energetic particles (SEPs). During SEP events, charged particles accumulate throughout the top ~ 1 mm of the regolith, which has low condukctivity, and create subsurface electric fields that act to dissipate any net buildup of charge. The faster the net charge accumulates, the larger the electric field needed to dissipate it. If the magnitude of the subsurface electric field exceeds ~10 6 V m -1, then dielectric breadkown is likely. This process rapidly dissipates the buildup of charge by vaporizing electrically conducting channels through the regolith. Dielectric breakdown

Space Weathering↗
NASA NTRS2018

How Dielectric Breakdown May Contribute to the Global Weathering of Regolith on the Moon

Space weathering is an important process on airless bodies, and it must be considered when interpreting data from planetary missions. Previous work has shown that solar energetic particles may cause dielectric breakdown in regolith within permanently shadowed regions near the poles of the Moon. Here, we predict that dielectric breakdown weathering could have melted and/or vaporized 2 − 9% of gardened (i.e., thoroughly mixed) regolith at the equator and 5 − 11% near the poles. If so, then ∼ 3 − 10% of all gardened regolith on the Moon may have experienced dielectric breakdown, and this process must be considered when analyzing remote sensing data or soil samples returned by the Luna and Apollo missions.

Jordan, A P.↗
NASA NTRS2021

Comparison of soil dielectric mixing models for Soil Moisture Retrieval using SMAP Brightness Temperature over croplands in India

The accurate estimation of soil moisture (SM) using microwave remote sensing depends mostly on careful selection of retrieval parameters among which the soil dielectric mixing model is the important one. These models are often categorized into empirical, semi-empirical or volumetric based on their methodologies and input data requirements. To study in detail, the comparative performance of four dielectric mixing models -- Wang & Schmugge model, Hallikainen model, Dobson model and Mironov model were used with Soil Moisture Active Passive (SMAP) L-band brightness temperature and Single Channel Algorithm for SM retrieval over agricultural landscapes in India. The highest performance statistics combination in terms of Root Mean Square Error (RMSE), correlation coefficient (R^(2)) and percentage bias (PBIAS) against the concurrent in-situ SM measurements were calculated at the selected validation sites. The overall results indicate that the best performance was given by the Mironov model (RMSE = 0.07 cu. m/cu. m), followed by Wang & Schmugge model (RMSE = 0.08 cu. m3/cu. m), Hallikainen model (RMSE = 0.09 cu. m/cu. m), Dobson model (RMSE = 0.10 cu. m/cu. m) and original SMAP radiometer SM (RMSE = 0.12 cu. m/cu. m). Findings of this study provides important insights into application and performance of dielectric mixing models in mapping surface SM variations. This study also underlines the pivotal role of local conditions for SM retrieval which should be carefully included in the algorithms.

Swati Suman↗
DOE OSTI2024

Free-Charge Carrier Generation in Homojunction Non-Polymeric Organic Semiconductor Films - The Role of the Optical Frequency Dielectric Constant

Engineering the dielectric constant (..epsilon..) to lower the exciton binding energy of the light-absorbing semiconductor can improve organic photovoltaic (OPV) device performance. Here, a series of materials are reported with 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) acceptor end groups and a central glycolated bis(4H-cyclopenta[2,1-b:3,4-b']dithiophene) unit with large low-frequency (..epsilon..lf = 7.4-7.9 at 0.1-0.2 MHz) and optical-frequency (..epsilon..opt up to 6.6 at 2 x 1014 Hz) dielectric constants. The INCN end groups differed in whether they were protonated, chlorinated, or fluorinated, with the latter having the highest ..epsilon..opt. An ..epsilon..opt of 6.6 is predicted to lead to a low exciton binding energy of ~0.04 eV. Time-resolved microwave conductivity measurements showed a temperature-dependent yield-mobility product, with it increasing linearly from 340 K. The onset temperature was near that required to overcome the calculated exciton binding energy and indicates increased free charge generation in a homojunction film. Room temperature transient absorption spectroscopy revealed that photoexcitation rapidly converted to a lower energy state that was consistent with the formation of polarons or a charge transfer state. This work provides experimental evidence of the importance of ..epsilon..opt for the generation of free charges, and a strategy for development of efficient single chromophore homojunction OPV devices.

charge generation↗
DOE OSTI2025

Dielectric Engineering of ZnO@ZIF‐8 for High‐Performance Triboelectric Nanogenerators and Self‐Powered Humidity Sensors

Porous metal oxide–metal-organic framework (MO x @MOF) hybrids offer synergistic effects that enhance surface charge density, electronic structure, and textural properties, making them ideal for self-powered sensing applications. Here, uniform, and pinhole-free ternary porous ZnO–PTFE@ZIF-8 hybrid films are developed on room-temperature co-sputtered ZnO–polytetrafluoroethylene (PTFE) composite films, where ZnO serves as a self-sacrificial precursor to precisely regulate ZIF-8 (Zn-MeIm 2 ) growth through solvothermal methods. The resulting TENG achieves a high output power density of 0.67 mW cm −2 , attributed to the synergistic effects of fluorine-rich PTFE and methyl-functionalized ZIF-8, which enhance surface charge density and dielectric response. By tuning PTFE content in the ZnO–PTFE composite, the dielectric constant and triboelectric output is optimized. The ZP60@ZIF-8-based device also demonstrates excellent humidity sensing performance, with a wide detection range (20–99% RH) and ultrahigh sensitivity (R V % of 19 900%, R I % of 19 325% at 99% RH). These results position ZP@ZIF-8-based TENGs as promising platforms for next-generation self-powered sensors and smart wearable electronics.

42 ENGINEERING↗
DOE OSTI2024

Stress due to electric charge density distribution in a dielectric slab

The spatial distribution of electric field due to an imposed electric charge density profile in an infinite slab of dielectric material is derived analytically by integrating Gauss’s law. Various charge density distributions are considered, including exponential and power-law forms. Here, the Maxwell stress tensor is used to compute a notional static stress in the material due to the charge density and its electric field. Characteristics of the electric field and stress distributions are computed for example cases in polyethylene, showing that field magnitudes exceeding the dielectric strength would be required in order to achieve a stress exceeding the ultimate tensile strength.

42 ENGINEERING↗
DOE OSTI2024

Temperature-dependent optical constants of vanadium dioxide thin films deposited on polar dielectrics

Coating polar dielectrics with thin film vanadium dioxide (VO 2 ) enables one to exploit the temperature-dependent phase transition within VO 2 to actively tune and modulate surface phonon polaritons at mid-infrared. However, controlling the behavior of such systems requires intimate knowledge of the temperature-dependent optical constants of VO 2 , which depend greatly on the growth conditions and substrate material. Here, in this work, we accurately determine the complex optical constants of VO 2 on polar dielectrics across the insulator-to-metal phase transition (IMT) using only normal incident reflectance spectra by analyzing the reflectance with Kramers–Kronig relations and thin film Fresnel equations. This non-ellipsometry technique offers an advantage in determining the refractive index using a standard infrared spectrometer.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthetic Band Structure Engineering of Graphene Using Block Copolymer-Templated Dielectric Superlattices

Engineering the electronic band structure of two-dimensional (2D) materials by imposing spatially periodic superlattice (SL) potentials opens a pathway to unconventional electronics. Nanopatterning the gate electrode or surface dielectric near 2D crystals provides a powerful strategy for realizing electrostatically tunable “remote” SLs with flexibility in lattice design. Here, we demonstrate the effectiveness of block copolymer (BCP)-templated dielectric nanopatterns for fabricating etch-free high-grade metal oxide SLs. Alumina (AlO x ) nanopatterns with hexagonal symmetry and a 38 nm SL wavelength are produced as a model material by directly converting a self-assembled BCP film via block-selective vapor phase infiltration. Despite micrometer-scale rotational disorder inherent to BCP self-assembly, electronic transport measurements of graphene reveal replica Dirac points at zero field and Hofstadter mini-gaps under finite magnetic fields. These results indicate the successful formation of remote SL potentials in graphene resulting from optimized AlO x nanopattern fabrication to achieve consistent lattice symmetry and periodicity at a macroscopic scale. The findings of this study, combined with the versatile, scalable, and cost-effective nature of BCP nanopatterning, highlight the potential of BCP-templated nanostructures for remote SL engineering in 2D crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Polarization Control via Artificial Optical Nonlinearity in Dielectric Metasurfaces

Nonlinear optical phenomena are generally governed by geometry in matter systems, as they depend on the spatial arrangement of atoms within materials or molecules. Metasurfaces, through precisely designed geometries on a subwavelength scale, allow the optical response of a material to be tailored far beyond its natural properties. Therefore, metasurfaces are highly appealing for enabling the engineering of nonlinear optical interactions. Current studies of nonlinear metasurfaces predominantly focus on the phase control of the generated light. Nonetheless, investigating the tensorial nature of the nonlinearity of metasurfaces and its effect on the polarization of the generated light is critical to fully unlocking a range of applications, such as nonlinear vector beam generation and nonlinear polarization imaging. Here, we study the artificial optical nonlinearity of a dielectric metasurface originating from its meta-atom symmetry and describe the third-order nonlinear behavior by considering the polarization degree of freedom. We establish an effective nonlinear medium model that serves as a design toolbox for developing amorphous silicon-based geometric metasurfaces with customizable features for third-harmonic generation. We further extract quantitative values of the artificial nonlinear susceptibility tensor elements related to the investigated nonlinear process and geometry. The implemented functional devices demonstrate the versatility of dielectric metasurfaces in shaping the emitted light in terms of amplitude, phase, and polarization for the precise engineering of advanced nonlinear architectures targeting applications in nonlinear imaging and complex light generation.

Diffraction↗
DOE OSTI2025

Humidity-Dependent Electrostatic Charge Decay on Dielectric Surface in Enclosed Volumes

Electrostatic surface charge decay is investigated to determine loss mechanisms, the effect of humidity, enclosure size, and material. This work focuses on charging dielectric and metal surfaces close to the electrical breakdown threshold in atmospheric air under humid and dry conditions. After initial charging to a maximum potential of roughly 30 kV, the associated surface charge is allowed to decay because of recombining with ions from the natural background, resulting in decay times ranging from minutes to hours to days. Spheres with a radius of 50 mm consisting of varying materials (PTFE and metal as referenced later) are charged and tested at relative humidity levels, RH, of 10%, 35%, and 64%. It was found that the ion-ion pair production rate and the enclosure size affected the measured charge decay rate. The impact of air convection on charge decay in the open air (no enclosure) is discussed. The humidity increased the rate of charge decay on the metal and dielectric spheres. For example, in the first 25 minutes after charging, the total charge on the PTFE sphere decreased to 66%or 50% from its initial value in the 10% and 35% RH tests, respectively. An equivalent generation rate is found for the ions in the enclosure, with 10 and 24 ion pairs cm −3 s −1 being generated at a 5% and 49% relative humidity, respectively.

42 ENGINEERING↗