Search NASA⌕ Search

SEARCH · Search NASA

Results for “Initiating Event Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Saturn radio emission near 1 MHz

Emission from the direction of the planet Saturn was observed by the IMP-6 spacecraft at 15 frequencies between 375 and 2200 kHz during the period April 1971 to October 1972. The Saturnian radio bursts were identified in the IMP-6 data through an analysis of the phase of the observed modulated signal detected from the spinning dipole antenna. Initial data reduction has isolated approximately 12 storms whose occurrence corresponded to times in which the spacecraft had an unobstructed view in the direction of Saturn. These events persisted over periods between one and ten minutes. Over the span of 500 days of data another 10 to 20 Saturnian events may exist, but positive identification is confused by the presence of terrestrial noise as well as a geometric ambiguity with Jupiter. A power spectral analysis of the storm occurrence times indicates a weak periodicity at 10h 30m + or - 5m at some of the observing frequencies. The spectral character of the radiation was found analogous to that of Jupiter.

Brown, L. W.↗

Safe Dissolution of High Flux Isotope Reactor Cores

The H-Canyon facility at the Savannah River Site is the U.S.A.’s only remaining full- scale chemical separations plant. H-Canyon maintains the capacity to safely and efficiently disposition a large inventory of excess nuclear material from across the Department of Energy (DOE) complex and used nuclear fuel from foreign and domestic research reactors. One such fuel that H-Canyon may dissolve is cores from the High Flux Isotope Reactor (HFIR). By employing realistic analysis, the need for administrative controls was eliminated. A new criticality modeling approach has eliminated the need for administrative controls for HFIR dissolution operations in H-Canyon. The primary upsets of concern are an over-mass event and an overconcentration event. Several initiating events were considered for each type of upset. Over-concentration events were deemed to be not credible by taking credit for the chemistry of acid consumption, i.e. there are not enough moles of acid to dissolve enough moles of uranium in order to reach a critical configuration. Over-mass events were deemed to be not credible by taking credit for the annular design of the fuel elements. By using realistic analysis, both types of upsets have been shown to be subcritical, and therefore administrative controls are not needed to prevent an inadvertent criticality. In this paper, the new methodology for performing criticality analyses for dissolving HFIR fuel elements will be presented, and the elimination of administrative controls will be discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Safe solution dissolution of high flux isotope reactor cores - 14490

The H-Canyon facility at the Savannah River Site is the U.S.A.'s only remaining full-scale chemical separations plant. H-Canyon maintains the capacity to safely and efficiently disposition a large inventory of excess nuclear material from across the Department of Energy (DOE) complex and used nuclear fuel from foreign and domestic research reactors. One such fuel that H-Canyon may dissolve is cores from the High Flux Isotope Reactor (HFIR). By employing realistic analysis, the need for administrative controls was eliminated. A new criticality modeling approach has eliminated the need for administrative controls for HFIR dissolution operations in H-Canyon. The primary upsets of concern are an over-mass event and an overconcentration event. Several initiating events were considered for each type of upset. Over-concentration events were deemed to be not credible by taking credit for the chemistry of acid consumption, i.e. there are not enough moles of acid to dissolve enough moles of uranium in order to reach a critical configuration. Over-mass events were deemed to be not credible by taking credit for the annular design of the fuel elements. By using realistic analysis, both types of upsets have been shown to be subcritical, and therefore administrative controls are not needed to prevent an inadvertent criticality. In this paper, the new methodology for performing criticality analyses for dissolving HFIR fuel elements will be presented, and the elimination of administrative controls will be discussed. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A numerical investigation of the summer 1980 U.S. heat wave

The diagnostic framework being utilized by researchers at NASA-Goddard in a numerical analysis of the draught which occurred in the U.S. in 1980 described, along with preliminary results. Attention is focused on the wave structure at 500 mb and comparisons of this structure with NMC data from 1963-77 to define conditions during the initiation, maintenance and decay of a draught. Attempts are also being made to develop a simple index for the diagnosis of heat patterns using as input data from the 500 mb analysis. Early studies involving the examination of the effects of varying boundary conditions have revealed a positive contribution from the soil moisture fields and a negative contribution from the North Pacific sea surface temperature during the event. Studies are continuing to characterize phenomena during draught initiation and decay.

Wolfson, N.↗

Individual Differences in Human Reliability Analysis

While human reliability analysis (HRA) methods include uncertainty in quantification, the nominal model of human error in HRA typically assumes that operator performance does not vary significantly when they are given the same initiating event, indicators, procedures, and training, and that any differences in operator performance are simply aleatory (i.e., random). While this assumption generally holds true when performing routine actions, variability in operator response has been observed in multiple studies, especially in complex situations that go beyond training and procedures. As such, complexity can lead to differences in operator performance (e.g., operator understanding and decision-making). Furthermore, psychological research has shown that there are a number of known antecedents (i.e., attributable causes) that consistently contribute to observable and systematically measurable (i.e., not random) differences in behavior. This paper reviews examples of individual differences taken from operational experience and the psychological literature. The impact of these differences in human behavior and their implications for HRA are then discussed. We propose that individual differences should not be treated as aleatory, but rather as epistemic. Ultimately, by understanding the sources of individual differences, it is possible to remove some epistemic uncertainty from analyses.

99 GENERAL AND MISCELLANEOUS↗

Criticality Consequence Analysis Roadmap for Spent Nuclear Fuel Canister in a Repository

This report discusses an initial criticality consequence analysis approach of commercial spent fuel canisters in a repository that will be developed to support a performance assessment (PA) of a repository with criticality events. A repository PA with criticality events may be needed to support direct disposal of currently loaded dual-purpose canisters. The ultimate goal is to develop a criticality consequence analysis model that can interface with any repository PA model. The criticality consequence analysis approach describes multi-physics coupling between neutronics, thermal hydraulics, and mechanics analysis codes. This report also discusses the sensitivity and uncertainty analysis approach for quantifying conservatism in the criticality consequence outcomes, as well as a defensible multi-physics validation approach to support any future licensing effort. This criticality consequence analysis approach will be refined in the future to support specific regulatory frameworks for a specific repository PA if needed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simple method for prediction of aircraft noise contours

A method for generating noise contours more rapidly and more simply than previously used programs is discussed. The method gives the area, the noise contour, and its extremities for an arbitrarily complex flight path for both takeoffs and landings with relative ease. The analysis reveals the fundamental nature of the contours and how the various factors that influence its size and shape enter into the analysis. It is noted that the effects of ground attenuation and shielding are omitted as they are important only on the initial portion of flight and are highly dependent upon aircraft configuration. However, the analysis shows that these effects could be included. It is emphasized the the single-event contour is an obvious choice for purposes of minimizing noise impact.

Stewart, E. C.↗

Role for Lower Extremity Interstitial Fluid Volume Changes in the Development of Orthostasis after Simulated Microgravity

Reentry orthostasis after exposure to the conditions of spaceflight is a persistent problem among astronauts. In a previous study, a computer model systems analysis was used to examine the physiologic mechanisms involved in this phenomenon. In this analysis, it was determined that an augmented capacitance of lower extremity veins due to a fluid volume contracture of the surrounding interstitial spaces during spaceflight results in an increase in sequestered blood volume upon standing and appears to be the initiating mechanism responsible for reentry orthostasis. In this study, we attempt to validate the central premise of this hypothesis using a ground-based spaceflight analog. 10 healthy subjects were placed at bed rest in a 6 head down tilt position for 60 days of bed rest. The impact of adaptations in interstitial fluid volume and venous capacitance in the lower extremities were then observed during a standard tilt test protocol performed before and after the confinement period. The interstitial thickness superficial to the calcaneous immediately below the lateral malleolus was measured using ultrasound with a 17-5 MHz linear array transducer. Measurements of the changes in anterior tibial vein diameter during tilt were obtained by similar methods. The measurements were taken while the subjects were supine and then during upright tilt (80') for thirty minutes, or until the subject had signs of presyncope. Additional measurements of the superficial left tibia interstitial thickness and stroke volume by standard echocardiographic methods were also recorded. In addition, calf compliance was measured over a pressure range of 10-60 mmHg, using plethysmography, in a subset of these subjects (n = 5). There was a average of 6% diminution in the size of the lower extremity interstitial space as compared to measurements acquired prior to bed rest. This contracture of the interstitial space coincided with a subsequent relative increase in the percentage change in tibial vein diameter and stroke volume upon tilting in contrast to the observations made before bed rest (54 vs 23% respectively). Compliance in the calf increased by an average of 36% by day 27 of bedrest. A systems analysis using a computer model of cardiovascular physiology suggests that microgravity induced interstitial volume depletion results in an accentuation of venous blood volume sequestration and is the initiating event in reentry orthostasis. This hypothesis was tested in volunteer subjects using a ground-based spaceflight analog model that simulated the body fluid redistribution induced by microgravity exposure. Measurements of changes in the interstitial spaces and observed responses of the anterior tibial vein with tilt, together with the increase in calf compliance, were consistent with our proposed mechanism for the initiation of postflight orthostasis often seen in astronauts.

Platts, Steven H.↗

Five-Channel Infrared Laser Absorption Spectrometer for Combustion Product Monitoring Aboard Manned Spacecraft

Continuous combustion product monitoring aboard manned spacecraft can prevent chronic exposure to hazardous compounds and also provides early detection of combustion events. As future missions extend beyond low-Earth orbit, analysis of returned environmental samples becomes impractical and safety monitoring should be performed in situ. Here, we describe initial designs of a five-channel tunable laser absorption spectrometer to continuously monitor combustion products with the goal of minimal maintenance and calibration over long-duration missions. The instrument incorporates dedicated laser channels to simultaneously target strong mid-infrared absorption lines of CO, HCl, HCN, HF, and CO2. The availability of low-power-consumption semiconductor lasers operating in the 2 to 5 micron wavelength range affords the flexibility to select absorption lines for each gas with maximum interaction strength and minimal interference from other gases, which enables the design of a compact and mechanically robust spectrometer with low-level sensitivity. In this paper, we focus primarily on absorption line selection based on the availability of low-power single-mode semiconductor laser sources designed specifically for the target wavelength range.

Briggs, Ryan M.↗

Initial Results from the ANITA 2006-2007 Balloon Flight

We report initial results of the Antarctic Impulsive Transient Antenna (ANITA) 2006-2007 Long Duration Balloon flight, which searched for evidence of the flux of cosmogenic neutrinos. ANITA flew for 35 days looking for radio impulses that might be due to the Askaryan effect in neutrino-induced electromagnetic showers within the Antarctic ice sheets. In our initial high-threshold robust analysis, no neutrino candidates are seen, with no physics background. In a non-signal horizontal-polarization channel, we do detect 6 events consistent with radio impulses from extensive air showers, which helps to validate the effectiveness of our method. Upper limits derived from our analysis now begin to eliminate the highest cosmogenic neutrino models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity analysis of in-pile critical heat flux experiments in TREAT for characterization of RIA power-transient effects

A reactivity-initiated accident (RIA) is one type of postulated design basis accident (DBA) that can cause a departure from nucleate boiling (DNB) event in pressurized-water reactors (PWRs). A DNB occurrence and its consequences depend on the thermophysical properties of the fuel components and coolant, characteristics of the transient energy insertion into the fuel rod, and the onset of the critical heat flux (CHF) phenomenon. To leverage the restart of the Transient Reactor Test (TREAT) Facility, an effort is currently underway to better understand the cladding-to-coolant heat transfer mechanisms and the CHF phenomenon under fast-transient irradiation conditions. This paper characterizes the impact of power transients on the thermal-hydraulic behavior of a TREAT Facility reactor heater rodlet CHF experiment to provide the priority of parameters that need to be investigated for an improved CHF model. Sobol sensitivity analysis methods and the Reactor Excursion and Leak Analysis Program (RELAP5-3D) code were used to identify key input parameters on the uncertainty in the prediction of peak outer- and inner-surface temperatures of the heater tube, as well as the time of the DNB event. A series of sensitivity analyses revealed the total energy deposition on the tube and the transient effects of power pulse had large impacts on the maximum temperatures. The CHF multiplier had the largest impact on the time occurrence of CHF. The overall results show the energy deposition rate in the tube is the most influencing factor to the manifestation of CHF and the resulting thermal-hydraulic behaviors of the tube. The multiplier for the CHF, which is interpreted as the predicted CHF value, has the largest Sobol indices for the time of the CHF in all cases, since it directly determines the occurrence of CHF. It is inferred that the uncertainties in the thermal-hydraulic behaviors of fuels increase with respect to the key parameters as the power pulse becomes broader, and an accurate estimation of the energy deposition rate is required to reduce the uncertainty in the evaluation of the integrity of fuel if the CHF is expected to occur near the peak power. Therefore, the outputs are expected to provide rigorous interpretation of ongoing in-pile CHF experiments in the TREAT Facility reactor regarding thermal-hydraulic behavior of the fuel system aiming for a new transient in-pile CHF model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

FEA-Based Failure Analysis of Post-Buckled Composite Multi-Hat Stiffened Panel Under Static Compression

The aerospace industry uses composite multi-hat stiffened panels for skins because of their high strength-to-weight and stiffness-to-weight ratios. However, laminated composites with initial flaws are susceptible to delamination under buckling loads. The goal is to ensure damage initiation occurs past the buckled state, only stable damage progression at loads below the ultimate compressive load, and debonding failure past the ultimate compressive load. This approach reduces weight and addresses a potential design review for future aircraft repairs. The need exists to better understand damage initiation and growth mechanisms in composite structures while assisting in the design, analysis, and sustainment methods. Teflon inserts simulate damage defects during manufacturing, while barely visible impact helps capture human error during manufacturing. This work shows the interaction between the skin-stringer and ply-ply separations at the post-buckled state for both defect events using Abaqus Virtual Crack Closure Technique (VCCT). The initial configuration for the Teflon case was to leave the Teflon region unbonded, and the initial impact damage region approximation came from the experimental data and was considered the initial configuration. When compared against the experimental data produced through the NASA Advanced Composites Project (ACP), the present model captured damage transition from skin-hat to ply1-ply2. The model validations were within ~5% of the experimental data.

composite↗

Light Water Sustainability Program: Optimizing Information Automation Using a New Method Based on System-Theoretic Process Analysis

This report describes the interim progress for research supporting the design and optimization of information automation systems for nuclear power plants. Much of the domestic nuclear fleet is currently focused on modernizing technologies and processes, including transitioning toward digitalization in the control room and elsewhere throughout the plant, along with a greater use of automation, artificial intelligence, robotics, and other emerging technologies. While there are significant opportunities to apply these technologies toward greater plant safety, efficiency, and overall cost-effectiveness, optimizing their design and avoiding potential safety and performance risks depends on ensuring that human-performance-related organizational and technical design issues are identified and addressed. This report describes modeling tools and techniques, based on sociotechnical system theory, to support these design goals and their application in the current research effort. The report is intended for senior nuclear energy stakeholders, including regulators, corporate management, and senior plant management. We have developed and employed a method to design an optimized information automation ecosystem (IAE) based on the systems-theoretic constructs underlying sociotechnical systems theory in general and the Systems-Theoretic Accident Modeling and Processes (STAMP) approach in particular. We argue that an IAE can be modeled as an interactive information control system whose behavior can be understood in terms of dynamic control and feedback relationships amongst the system’s technical and organizational components. Up to this point, we have employed a Causal Analysis based on STAMP (CAST) technique to examine a performance- and safety-related incident at an industry partner’s plant that involved the unintentional activation of an emergency diesel generator. This analysis provided insight into the behavior of the plant’s current information control structure within the context of a specific, significant event. Our ongoing analysis is focused on identifying near-term process improvements and longer-term design requirements for an optimized IAE system. The latter analyses will employ a second STAMP-derived technique, System-Theoretic Process Analysis (STPA). STPA is a useful modeling tool for generating and analyzing actual or potential information control structures. Finally, we have begun modeling plantwide organizational relationships and processes. Organizational system modeling will supplement our CAST and STPA findings and provide a basis for mapping out a plantwide information control architecture. CAST analysis findings indicate an important underlying contributor to the incident under investigation, and a significant risk to information automation system performance, was perceived schedule pressure, which exposed weaknesses in interdepartmental coordination between and within responsible plant organizations and challenged the resilience of established plant processes, until a human caused the initiating event. These findings are discussed in terms of their risk to overall system performance and their implications for information automation system resilience and brittleness. We present two preliminary information automation models. The proactive issue resolution model is a test case of an information automation concept with significant near-term potential for application and subsequent reduction in significant plant events. The IAE model is a more general representation of a broader, plantwide information automation system. From our results, we have generated a set of preliminary system-level requirements and safety constraints. These requirements will be further developed over the remainder of our project in collaboration with nuclear industry subject matter experts and specialists in the technical systems under consideration. Additionally, we will continue to pursue the system analyses initiated in the first part of our effort, with a particular emphasis on STPA as the main tool to identify weak or weakening control structures that affect the resilience of organizations and programs. Our intent is to broaden the scope of the analysis from an individual use case to a related set of use cases (e.g., maintenance tasks, compliance tasks) with similar human-system performance challenges. This will enable more generalized findings to refine the Proactive Issue Resolution and IAE models, as well as their system-level requirements and safety constraints. We will use organizational system modeling analyses to supplement STPA findings and model development. We conclude the report with a set of summary recommendations and an initial draft list of system-level requirements and safety constraints for optimized information automation systems.

99 GENERAL AND MISCELLANEOUS↗

Unitarity bounds on effective field theories at the LHC

Effective Field Theory (EFT) extensions of the Standard Model are tools to compute observables (e.g. cross sections with partonic center-of-mass energy √s^) as a systematically improvable expansion suppressed by a new physics scale M. If one is interested in EFT predictions in the parameter space where M < √s^, concerns of self-consistency emerge, which can manifest as a violation of perturbative partial-wave unitarity. However, when we search for the effects of an EFT at a hadron collider with center-of-mass energy √s using an inclusive strategy, we typically do not have access to the event-by-event value of √s^. This motivates the need for a formalism that incorporates parton distribution functions into the perturbative partial-wave unitarity analysis. Developing such a framework and initiating an exploration of its implications is the goal of this work. Our approach opens up a potentially valid region of the EFT parameter space where M << √s. We provide evidence that there exist valid EFTs in this parameter space. The perturbative unitarity bounds are sensitive to the details of a given search, an effect we investigate by varying kinematic cuts.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A semi-supervised machine learning detector for physics events in tokamak discharges

Databases of physics events have been used in various fusion research applications, including the development of scaling laws and disruption avoidance algorithms, yet they can be time-consuming and tedious to construct. This paper presents a novel application of the label spreading semi-supervised learning algorithm to accelerate this process by detecting distinct events in a large dataset of discharges, given few manually labeled examples. A high detection accuracy (> 85%) for H-L back transitions and initially rotating locked modes is demonstrated on a dataset of hundreds of discharges from DIII-D with manually identified events for which only 3 discharges are initially labeled by the user. Lower yet reasonable performance (~75%) is also demonstrated for the core radiative collapse, an event with a much lower prevalence in the dataset. Additionally, analysis of the performance sensitivity indicates that the same set of algorithmic parameters is optimal for each event. Furthermore, this suggests that the method can be applied to detect a variety of other events not included in this paper, given that the event is well described by a set of 0D signals robustly available on many discharges. Procedures for analysis of new events are demonstrated, showing automatic event detection with increasing fidelity as the user strategically adds manually labeled examples. Detections on Alcator C-Mod and EAST are also shown, demonstrating the potential for this to be used on a multi-tokamak dataset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous and Staggered Foot-and-Mouth Disease Virus Coinfection of Cattle

Foot-and-mouth disease (FMD) field studies have suggested the occurrence of simultaneous infection of individual hosts by multiple virus strains; however, the pathogenesis of foot-and-mouth disease virus (FMDV) coinfections is largely unknown. In the current study, cattle were experimentally exposed to two FMDV strains of different serotypes (O and A). One cohort was simultaneously infected with both viruses, while additional cohorts were initially infected with FMDV A and subsequently superinfected with FMDV O after 21 or 35 days. Coinfections were confirmed during acute infection, with both viruses concurrently detected in blood, lesions, and secretions. Staggered exposures resulted in overlapping infections as convalescent animals with persistent subclinical FMDV infection were superinfected with a heterologous virus. Staggering virus exposure by 21 days conferred clinical protection in six of eight cattle, which were subclinically infected following the heterologous virus exposure. This effect was transient, as all animals superinfected at 35 days post-initial infection developed fulminant FMD. The majority of cattle maintained persistent infection with one of the two viruses while clearing the other. Analysis of viral genomes confirmed interserotypic recombination events within 10 days in the upper respiratory tract of five superinfected animals from which the dominant genomes contained the capsid coding regions of the O virus and nonstructural coding regions of the A virus. In contrast, there were no dominant recombinant genomes detected in samples from simultaneously coinfected cattle. These findings inculpate persistently infected carriers as potential FMDV mixing vessels in which novel strains may rapidly emerge through superinfection and recombination.

59 BASIC BIOLOGICAL SCIENCES↗