Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Torque magnetometry of an amorphous-alumina/strontium-titanate interface

Here, we report torque magnetometry measurements of an oxide heterostructure consisting of an amorphous Al 2 O 3 thin film grown on a crystalline SrTiO 3 substrate (α -AO/STO) by atomic layer deposition. We find a torque response that resembles previous studies of crystalline LaAlO 3 /SrTiO 3 (LAO/STO) heterointerfaces, consistent with strongly anisotropic magnetic ordering in the plane of the interface. Unlike crystalline LAO, amorphous Al 2 O 3 is nonpolar, indicating that planar magnetism at an oxide interface is possible without the strong internal electric fields generated within the polarization catastrophe model. We discuss our results in the context of current theoretical efforts to explain magnetism in crystalline LAO/STO.

36 MATERIALS SCIENCE↗

Influence of quantum confinement and strain on orbital polarization of four-layer LaNiO 3 superlattices: A DFT+DMFT study

Atomically precise superlattices involving transition metal oxides provide a unique opportunity to engineer correlated electron physics using strain (modulated by choice of substate) and quantum confinement (controlled by layer thickness). We use the combination of density functional theory and dynamical mean field theory (DFT+DMFT) to study Ni E g d-orbital polarization in strained LaNiO 3 /LaAlO 3 superlattices consisting of four layers of nominally metallic NiO 2 and four layers of insulating AlO 2 separated by LaO layers. The layer-resolved orbital polarization is calculated as a function of strain and analyzed in terms of structural, quantum confinement, and correlation effects. We determined that the effect of strain is from the dependence of the results on the Ni-O bondlength ratio and the octahedral rotation angles; quantum confinement is studied by comparison to bulk calculations with similar degrees of strain; correlation effects are inferred by varying interaction parameters within our DFT+DMFT calculations. The calculated dependence of orbital polarization on strain in superlattices is qualitatively consistent with recent X-ray absorption spectroscopy and resonant reflectometry data. But, interesting differences of detail are found between theory and experiment. Under tensile strain, the two inequivalent Ni ions display orbital polarization similar to that calculated for strained bulk LaNiO 3 and observed in experiment. Compressive strain produces a larger dependence of orbital polarization on Ni position and even the inner Ni layer exhibits orbital polarization different from that calculated for strained bulk LaNiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure effects on nonfluorinated BiS 2 -based superconductors La 1 – x M x OBiS 2 ( M = Ti and Th)

Layered LnOBiS 2 (where Ln represents a lanthanide element) compounds with Ln = La, Ce, Pr, Nd, and Yb can be rendered conducting and superconducting via two routes, substitution of F for O or the tetravalent ions Ti, Zr, Hf, and Th for trivalent Ln ions. Electrical resistivity measurements on nonfluorinated La 0.80 Ti 0.20 OBiS 2 and La 0.85 Th 0.15 OBiS 2 superconductors were performed between ~1.5 and 300 K and under pressure up to 2.4 GPa. For both compounds, the superconducting transition temperature T c , which is ~2.9K at ambient pressure, gradually increases with pressure to 3.2–3.7 K at ~1GPa, above which it is suppressed and the superconducting transitions become very broad. Measurements of the normal-state electrical resistivity of the two compounds reveal discontinuous changes in the resistivity as a function of pressure at ~0.6GPa. Surprisingly, above 1.3 GPa, semiconductinglike behavior reappears in La 0.80 Ti 0.20 OBiS 2 . This paper reveals a new high-pressure phase of La 1-x M x OBiS 2 containing the tetravalent ions M=Ti, Th which does not favor superconductivity. In contrast, application of pressure to fluorinated LaO 0.5 F 0.5 BiS 2 produces an abrupt tetragonal-monoclinic transition to a metallic phase with an enhanced T c . Here, these results demonstrate that the response of the normal and superconducting properties of LaOBiS 2 -based compounds depends strongly on the atomic site where the electron donor ions are substituted.

36 MATERIALS SCIENCE↗

Interface Structure, Band Alignment, and Built-In Potentials at LaFeO 3 / n - SrTiO 3 Heterojunctions

We demonstrate that LaFeO 3 /n-SrTiO 3 (001) heterojunctions engineered to have opposite interface polarities exhibit very similar band offsets and built-in potentials within the LaFeO 3 layer of the same sign. However, heterojunctions with the TiO20-LaO+ interface structure attract electronic charge from the n-STO substrate, whereas those with the SrO0-FeO2-1 interface structure do not. These results suggest that the latter would more effectively facilitate photogenerated electron-hole pair separation than the former, an important result for photoelectrochemical water splitting

36 MATERIALS SCIENCE↗

Effects of the surface termination and the oxygen vacancy position on LaNiO 3 ultra-thin films: First-principles study

In this study, while ultra-thin layers of the LaNiO 3 film exhibit a remarkable metal-insulator transition as the film thickness becomes smaller than a few unit cell (u.c.), the formation of possible oxygen vacancies and their effects on the correlated electronic structure have been rarely studied using first principles. Here, we investigate the effects of the surface termination and the oxygen vacancy position on the electronic properties and vacancy energetics of LaNiO 3 ultra-thin films under the compressive strain using density functional theory plus U (DFT + U). We find that oxygen vacancies can be easily formed in the Ni layers with the NiO 2 terminated surface (0.5 u.c. and 1.5 u.c. thickness) compared to the structures with the LaO terminated surface and the in-plane vacancy is energetically favored than the out-of-plane vacancy. When two vacancy sites are allowed, the Ni square plane geometry is energetically more stable in most cases as two oxygen vacancies tend to stay near a Ni ion. Strong anisotropy between the in-plane and out-of-plane vacancy formation as well as the layer and orbital dependent electronic structure occur due to strain, surface termination, charge reconstruction, and quantum confinement effects. The in-plane vacancy of the NiO 2 terminated structure is favored since the released charge due to the oxygen vacancy can be easily accommodated in the d x 2 -y 2 orbital, which is less occupied than the d z 2 orbital. Remarkably, the oxygen vacancy structure containing the Ni square-plane geometry becomes an insulating state in DFT + U with a sizable band gap of 1.2 eV because the large crystal field splitting between d z 2 and d x 2 -y 2 orbitals in the square-plane favors an insulating state and the Mott insulating state is induced in other Ni sites due to strong electronic correlations. In the thin-film structure without oxygen vacancies, the strong correlation effect in DFT + U drives a pseudogap ground state at the Fermi energy, similarly as the experimental photo-emission spectra; however, the variation of the DFT + U electronic structure depending on the surface termination becomes weaker compared to those obtained in DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects in nonpolar (134{sup ¯}0) ZnO epitaxial film grown on (114) LaAlO{sub 3} substrate

The defects in (134{sup ¯}0)ZnO epitaxial film grown on (114)LaAlO{sub 3} (LAO) have been systematically investigated by using transmission electron microscopy. At the ZnO/LAO interface, the Burgers vectors of misfit dislocations are identified to be 1/3[1{sup ¯}21{sup ¯}0] and 1/2[0001]. Threading dislocations with the Burgers vectors of 1/3〈112{sup ¯}0〉 and 〈0001〉 are distributed on the basal plane. In (134{sup ¯}0)ZnO film, the predominant planar defects are basal stacking faults (BSFs) with 1/6〈202{sup ¯}3〉 displacement vectors. The densities of dislocations and BSFs are about 3.8 × 10{sup 10} cm{sup −2} and 3.1 × 10{sup 5} cm{sup −1}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of rapid thermal annealing on the properties of HfO{sub 2}/La{sub 2}O{sub 3} nanolaminate films deposited by plasma enhanced atomic layer deposition

In this work, HfO{sub 2}/La{sub 2}O{sub 3} nanolaminate films were deposited on Si substrates by plasma enhanced atomic layer deposition with in situ plasma treatment. Different annealing treatments were adopted to change films structure and performance. The upper HfO{sub 2} layers in HfO{sub 2}/La{sub 2}O{sub 3} nanolaminates were easily crystallized after annealing at 800 °C, while all the La{sub 2}O{sub 3} layers kept amorphous. X-ray photoelectron spectroscopy results indicated that LaO(OH) and La(OH){sub 3} peaks became weak, H{sub 2}O molecules in laminates evaporated during high-temperature annealing. Band diagram analysis showed that valence band offset and band gap widened after 800 °C annealing. Annealing, especially 800 °C annealing, had gentle effect on leakage current, but could obviously change capacitance and permittivity due to tetragonal and cubic phase formed in the HfO{sub 2} film.

36 MATERIALS SCIENCE↗

SU-E-I-42: Normalized Embryo/fetus Doses for Fluoroscopically Guided Pacemaker Implantation Procedures Calculated Using a Monte Carlo Technique

Purpose: It is well known that pacemaker implantation is sometimes needed in pregnant patients with symptomatic bradycardia. To our knowledge, there is no reported experience regarding radiation doses to the unborn child resulting from fluoroscopy during pacemaker implantation. The purpose of the current study was to develop a method for estimating embryo/fetus dose from fluoroscopically guided pacemaker implantation procedures performed on pregnant patients during all trimesters of gestation. Methods: The Monte Carlo N-Particle (MCNP) radiation transport code was employed in this study. Three mathematical anthropomorphic phantoms representing the average pregnant patient at the first, second and third trimesters of gestation were generated using Bodybuilder software (White Rock science, White Rock, NM). The normalized embryo/fetus dose from the posteroanterior (PA), the 30° left-anterior oblique (LAO) and the 30° right-anterior oblique (RAO) projections were calculated for a wide range of kVp (50–120 kVp) and total filtration values (2.5–9.0 mm Al). Results: The results consist of radiation doses normalized to a) entrance skin dose (ESD) and b) dose area product (DAP) so that the dose to the unborn child from any fluoroscopic technique and x-ray device used can be calculated. ESD normalized doses ranged from 0.008 (PA, first trimester) to 2.519 μGy/mGy (RAO, third trimester). DAP normalized doses ranged from 0.051 (PA, first trimester) to 12.852 μGy/Gycm2 (RAO, third trimester). Conclusion: Embryo/fetus doses from fluoroscopically guided pacemaker implantation procedures performed on pregnant patients during all stages of gestation can be estimated using the method developed in this study. This study was supported by the Greek Ministry of Education and Religious Affairs, General Secretariat for Research and Technology, Operational Program ‘Education and Lifelong Learning’, ARISTIA (Research project: CONCERT)

60 APPLIED LIFE SCIENCES↗

Data and methods to estimate fetal dose from fluoroscopically guided prophylactic hypogastric artery balloon occlusion

Purpose: To provide data for estimation of fetal radiation dose (D{sub F}) from prophylactic hypogastric artery balloon occlusion (HABO) procedures. Methods: The Monte-Carlo-N-particle (MCNP) transport code and mathematical phantoms representing a pregnant patient at the ninth month of gestation were employed. PA, RAO 20° and LAO 20° fluoroscopy projections of left and right internal iliac arteries were simulated. Projection-specific normalized fetal dose (NFD) data were produced for various beam qualities. The effects of projection angle, x-ray field location relative to the fetus, field size, maternal body size, and fetal size on NFD were investigated. Presented NFD values were compared to corresponding values derived using a physical anthropomorphic phantom simulating pregnancy at the third trimester and thermoluminescence dosimeters. Results: NFD did not considerably vary when projection angle was altered by ±5°, whereas it was found to markedly depend on tube voltage, filtration, x-ray field location and size, and maternal body size. Differences in NFD < 7.5% were observed for naturally expected variations in fetal size. A difference of less than 13.5% was observed between NFD values estimated by MCNP and direct measurements. Conclusions: Data and methods provided allow for reliable estimation of radiation burden to the fetus from HABO.

60 APPLIED LIFE SCIENCES↗

Influence of mechanical stresses on the charge state of the interface in the LaAlO{sub 3}/(001)SrTiO{sub 3} heterostructures with a distorted stoichiometry

The medium-energy ion scattering (MEIS) spectroscopy was used to obtain the data on the structure and stoichiometry of interfaces in LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) heterostructures. The coverage of the LAO/STO heterostructure with a LAO film increased by a factor of almost two as the lanthanum aluminate layer thickness increased from 1 to 6 unit cells. It is shown that the formation of the heterostructure is accompanied by the interchange with Sr ions of the substrate and La ions of the firm. The influence of the oxygen pressure on the formation of the heterostructure has been studied. The conditions required to form nanodimentional interlayer of a quasi-two-dimensional electron gas with high mobility of electrons in the interface region are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flash Sintering of Oxide Ceramics under Microwave Heating

We report on the results of the analysis of the effect of flash sintering, which is observed upon heating compacted powder materials by high-intensity microwave radiation. Ceramic samples of Y{sub 2}O{sub 3}, MgAl{sub 2}O{sub 4}, and Yb: (LaO){sub 2}O{sub 3} were sintered to a density exceeding 98–99% of the theoretical value during 0.5–5 min without isothermal hold. The specific microwave power absorbed volumetrically in the samples was 20–400 W/cm{sup 3}. Based on the analysis of the experimental data (microwave radiation power and heating and cooling rates) and of the microstructure of the obtained materials, we propose a mechanism of flash sintering based on the evolution of the thermal instability and softening (melting) of the grain boundaries. The proposed mechanism also explains the flash sintering effect observed when a dc or a low-frequency ac voltage is applied to the samples. The microwave heating makes it possible to implement flash sintering without using electrodes for supplying energy to the articles being sintered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hard X-ray Fluorescence Measurements of Heteroepitaxial Solid Oxide Fuel Cell Cathode Materials

Commonly, SOFCs are operated at high temperatures (above 800°C). At these temperatures expensive housing is needed to contain an operating stack as well as coatings to contain the oxidation of the metallic interconnects. Lowering the temperature of an operating device would allow for more conventional materials to be used, thus lowering overall cost. Understanding the surface chemical states of cations in the surface of the SOFC cathode is vital to designing a system that will perform well at lower temperatures. The samples studied were grown by pulsed laser deposition (PLD) at the Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL). 20% strontium doped lanthanum manganite (LSM-20) was grown on YSZ and NGO (neodymium gallate). The films on YSZ have a fiber texture. LSM-20 on NGO is heteroepitaxial. Lanthanum strontium cobalt ferrite (LSCF-6428) films were grown on LAO and YSZ with a GDC barrier layer. Total X-ray Reflection Fluorescence (TXRF) was used to depth profile the samples. In a typical experiment, the angle of the incident beam is varied though the critical angle. Below the critical angle, the x-ray decays as an evanescent wave and will only penetrate the top few nanometers. TXRF experiments done on LSM films have suggested strontium segregates to the surface and form strontium enriched nanoparticles (1). It should be pointed out that past studies have focused on 30% strontium A-site doping, but this project uses 20% strontium doped lanthanum manganite. XANES and EXAFS data were taken as a function of incoming angle to probe composition as a function of depth. XANES spectra can be difficult to analyze fully. For other materials density functional theory calculations compared to near edge measurements have been a good way to understand the 3d valence electrons (2).

Environmental Molecular Sciences Laboratory↗

Rheological properties of corn stover slurries during fermentation by Clostridium thermocellum

Background: Milling during fermentation, termed cotreatment, has recently been proposed as an alternative to thermochemical pretreatment as a means to increase the accessibility of lignocellulosic biomass to biological attack. A central premise of this approach is that partial solubilization of biomass changes the slurry’s physical properties such that milling becomes more impactful and more feasible. A key uncertainty is the energy required to mill partially fermented biomass. To inform both of these issues, we report rheological characterization of small-particle, corn stover slurries undergoing fermentation by Clostridium thermocellum . Results: Fermented and unfermented corn stover slurries were found to be shear-thinning and well described by a power law model with an exponent of 0.10. Plastic viscosity of a slurry, initially at 16 wt.% insoluble solids, decreased as a result of fermentation by a factor of 2000, with the frst eightfold reduction occurring in the frst 10% of carbohydrate conversion. Large amplitude oscillatory shear experiments revealed only minor changes to the slurry’s rheological fngerprint as a result of fermentation, with the notable change being a reduction in the critical strain amplitude needed for the onset of nonlinearity. All slurries were found to be elastoviscoplastic, with the elastic/viscous crossover at roughly 100% strain amplitude. Conclusions: Whereas prior biomass rheology studies have involved pretreated feedstocks and solubilization mediated by fungal cellulase, we report results for feedstocks with no pretreatment other than autoclaving and for solubilization mediated by C. thermocellum . As observed in prior studies, C. thermocellum fermentation results in a dramatic decrease in viscosity. The magnitude of this decrease, however, is much larger starting with unpretreated feedstock than previously reported for pretreated feedstocks. LAOS measurements provide a detailed picture of the rheological fngerprint of the material. Viscosity measurements confrm the hypothesis that the physical character of corn stover slurries changes dramatically during fermentation by C. thermocellum , and indicate that the energy expended on overcoming slurry viscosity will be far less for partially fermented corn stover than for unfermented corn stover.

09 BIOMASS FUELS↗

Materials Data on La2Mn2Se2O3 by Materials Project

(LaO)2Mn2Se2O crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. La3+ is bonded in a 4-coordinate geometry to four equivalent Se2- and four equivalent O2- atoms. All La–Se bond lengths are 3.40 Å. All La–O bond lengths are 2.41 Å. Mn2+ is bonded in a distorted linear geometry to four equivalent Se2- and two equivalent O2- atoms. All Mn–Se bond lengths are 2.84 Å. Both Mn–O bond lengths are 2.10 Å. Se2- is bonded in a 12-coordinate geometry to four equivalent La3+ and four equivalent Mn2+ atoms. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded to four equivalent La3+ atoms to form a mixture of distorted corner and edge-sharing OLa4 tetrahedra. In the second O2- site, O2- is bonded in a square co-planar geometry to four equivalent Mn2+ atoms.

36 MATERIALS SCIENCE↗

Linear viscoelastic measurements of commerical therapy putties for design and intuition

This dataset complements the publication Mapping Linear Viscoelasticity for Design and Tactile Intuition (Corman & Ewoldt, 2019). It contains rigorous shear rheometry measurements for six commercial silicone putties, including creep recovery, SAOS, LAOS, and stress relaxation. Additional, unpublished data was generated as part of a graduate rheology course taught by Randy Ewoldt at University of Illinois Urbana-Champaign. Together, these datasets provide a comprehensive example of linear viscoelasticity of a commercial material. The collection is intended both as a pedagogical resource for developing physical intuition in linear viscoelasticity and as a reference dataset for data interpretation, model fitting, and comparative rheological analysis.

C. Marsh, Maxwell↗

Performance Improvements to the Neutron Imaging System at the National Ignition Facility

A team headed by LANL and including many members from LLNL and NSTec LO and NSTec LAO fielded a neutron imaging system (NIS) at the National Ignition Facility at the start of 2011. The NIS consists of a pinhole array that is located 32.5 cm from the source and that creates an image of the source in a segmented scintillator 28 m from the source. The scintillator is viewed by two gated, optical imaging systems: one that is fiber coupled, and one that is lens coupled. While there are a number of other pieces to the system related to pinhole alignment, collimation, shielding and data acquisition, those pieces are discussed elsewhere and are not relevant here. The system is operational and has successfully obtained data on more that ten imaging shots. This remainder of this whitepaper is divided in five main sections. In Section II, we identify three critical areas of improvement that we believe should be pursued to improve the performance of the system for future experiments: spatial resolution, temporal response and signal-to-noise ratio. In Section III, we discuss technologies that could be used to improve these critical performance areas. In Section IV, we describe a path to evolve the current system to achieve improved performance with minimal impact on the ability of the system to operate on shots. In Section V, we discuss the abilities, scope and timescales of the current teams and the Commissariat energie atomique (CEA). In Section VI, we summarize and make specific recommendations for collaboration on improvements to the NIS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Building Blocks of Electric Vehicle Deployment: A Guide for Developing Countries

Countries can use electric transportation to help fulfill numerous goals, including greenhouse gas (GHG) emissions targets, local air quality goals, mobility objectives, energy security, and transportation resiliency. Vehicle electrification is a promising pathway to achieving clean energy transitions in the transport sector at scale. As vehicles electrify, the traditionally siloed electricity and transport sectors increasingly converge to create technical, institutional, and economic opportunities and challenges. To navigate this transition effectively, we propose the following foundational pillars or “building blocks” that undergird effective electric vehicle (EV) deployment. Jurisdictions with experience and mature EV markets offer useful lessons learned that may enable developing countries to leapfrog over common roadblocks. Nonetheless, developing countries face distinct challenges collectively, and individually, from developed countries that require careful consideration. From our work around the world, the U.S. Agency for International Development (USAID) and National Renewable Energy Laboratory (NREL) have witnessed interest growing in EVs for a variety of reasons. Lao People’s Democratic Republic (PDR), for example, looks toward EVs as a way to use their surplus of hydropower to displace expensive oil. Thailand and Pakistan seek economic development opportunities in EV manufacturing. Cities including Mexico City, Surat, India, and Kingston, Jamaica see the potential of bus electrification to improve local air quality and reduce traffic congestion. Many USAID partner countries in Southeast Asia are trying to understand how to reach ambitious EV deployment targets and implement EV and transportation plans. This pursuit is prompting questions about EV supply equipment (EVSE) standards, tariff design, and business models that affirm the importance of the building blocks outlined in this report.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Epitaxial Multifunctional Oxide Heterostructures (DOE Final Technical Report)

The conducting interface that forms between the two band insulators LaAlO 3 (LAO) and SrTiO 3 (STO) continues to attract tremendous attention nearly 15 years after its discovery. Until recently, most of the work on this system has been done in samples grown in the (001) crystal orientation. More recently, interest has focused on samples grown in the (110) and (111) crystal orientations. While the underlying cubic crystal structure is the same, the lattice symmetry at the interface in each case is different, raising the possibility of different properties. In particular, the symmetry of the Ti atoms at the (111) interface is hexagonal, similar to graphene, leading to predictions of topological properties of the band structure. The major part of this proposal is devoted to exploring the properties of (111) LAO/STO interfaces and (111) (La 0.3 Sr 0.7 )(Al 0.65 Ta 0.35 )/STO (LSAT/STO) interfaces, where we have recently discovered interesting new effects.

36 MATERIALS SCIENCE↗